Images of iPod touch - volume of the .mov clips

Similar Questions

• On my old iPod Touch (4th generation), the music application does not open

  On my old iPod Touch (4th generation), the music application does not open. Everything will work as before. I suspect it has something to do with the position that the app was (in podcast lists) before the last sync. How can I get the app to open again?

  If you have not already, restart the iPod touch

  Restart your iPhone, iPad or iPod touch - Apple Support

• What to do when ipod touch volume turns down by itself

  iPod touch 5 has started to turn down the volume in itself the sep 11.

  I have already restored like new, it did not work.

  Today it didn't turn... so I decided to connect it to the PC... I opened ITunes and you press the power button and open a whole... it turned on.

  Open ITunes window saying there was a problem and it should be updated... If it did not work it needs to be restored again.

  What should I do?

  I tried to make an appointment at the Genius Bar, but so far nothing

  Thank you

  -Do you have a case on the iPod that could be turned on the switch?

  -Is what the volume switch/look stuck?

  -If you have restored the factory settings successfully / new iPod via iTunes that indicates a hardware problem. Try the Genius Bar

• When you use Itunes on my Ipod Touch 5 generation, the Ipod is no longer automatically past from one song to another. This seems to be a novelty. There is a button on the RIGHT side of the upper third of the screen where you can choose options but go n0.

  When you use ITunes on my Ipod Touch 5 Gen, running IOS 9.2, he has recently stopped automatically switch a song on one album to another while listening to ITunes. I discovered a button with 3 points to the RIGHT side of each title of the song which, when typed gives a different options for example then played, add up to the next etc.. If you use these all this seems to get worse with more choices that appear. I know that sounds incredible, but I have owned several Ipods that I use just for listening to music. Mine is a 32 GB version that can store a large number of albums, most of which I bought and loaded into my Ipod. A few albums that I downloaded from ITunes. How can I get it from my Ipod to listen to music in the ITunes application without having to select one of the 55 options?

  See if the chapter of the music of the Manual:

  http://help.Apple.com/iPod-touch/9/#/iph3bd017b9

  Next:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  Unsync/delete all the music and Resync

  To remove all music go to settings > general > use > storage > storage management > music > tap Edit in the top-right, then press the sign less than all music

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

• When I refresh my page she sticks image preloader and have to play the movie

  Stop();
  for the rest of the script see "label HOME-stocks, PORTFOLIO, CONTACT" embedded movie clips!
  Preloader!
  loaderInfo.addEventListener (ProgressEvent.PROGRESS, updatePreloader);

  function updatePreloader(evtObj:ProgressEvent):void
  {
  var p: Number = Math.floor((evtObj.bytesLoaded*100)/evtObj.bytesTotal);
  preloader_txt. Text = % + '% ';
  If (p == 100) {}
  Play();
  }
  }

  is this due to my script?

  delete your updatePreloader() function play() function and create a complete event listener and a listener function where you put your play() function.

• Button inside the Movie Clip

  I need to find a way to make a clip or a button click on, and then lead to a clip that opens a window with data and has a box of x to leave this movie clip. I also need this box WITH the x to be moved together. I can't get the closing work, anyone can please help? !

  See my account for more details please

  //Louisville,CO -------------------------------
  
  louisville_btn.onPress = function () {
       louisville_box.gotoAndPlay("play");
  }
  // DRAG
  louisville_box.onPress = function(){
       startDrag(louisville_box);
  }
  louisville_box.onRelease = louisville_box.onReleaseOutside = function(){
       stopDrag();
  }
  
  louisville_drag.closeBox.onPress = function() {
       startDrag(this._parent);
  };
  
  louisville_drag.closeBox.onRelease = function() {
       stopDrag();
  };
  
  closeBox.onRelease = function() {
       louisville_box.gotoAndStop("stop"); 
       };
  

  Since you will have a lot of cities, buttons boxesand sharing the same code, it is best to put all the code in the main storyline (the first image).

  If you write code at the beginning that refers to an object that is not currently part of the scene (such as a button that is located on the second frame of a movieclip, which has a code stop() on the first picture), this code never reached its target.

  Similar: If you catch a MouseEvent as onRelease at the parent level, the event is not registered for the child.

  Hope that the attachment is what you had in mind.

  Nice graphic btw

• AS3: see the hide the elements of the movie clip, single button array.

  Hello and please forgive my Noobdity I teach myself AS3 and stuck on what are obviously the basics.

  I did the simple animations for years without using any AS3 at all, the time has come to take seriously.

  I read the daylights out of all reference documents Adobe now but I am stuck on this task.

  I have 4 objects of movie clip whose visibility I control with two buttons.

  First button, two of these visible clips and the other two will make visible = false

  For example: Mc1 and Mc2 > visible, Mc3 and Mc4 > visible = false

  The second button run the same function but in reverse

  Eg: Mc1 and Mc2 > visible = false, Mc3 and Mc4 > visible

  I've determined correctly or incorrectly reading endless and looking for a table should be the best way to do it.

  I may have to use the child feature add but * shrugs, I'm lost atmo

  I've been blunders on the code for the first of two simple buttons.

  I start slowly form a mindmap what should be done, but it's early days.

  Here is my code and please feel free to

  Last attempt tries to use the mouse on the trigger to control the visible state of the second two clips.

  var wcArray:Array = [myMovieclip1, myMovieclip2];

  var acArray:Array = [myMovieclip3, myMovieclip4];

  acComp_btn.addEventListener (MouseEvent.CLICK, _acComp);

  internal _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans acArray)}

  Item.visible =! item.visible;

  }

  }

  acComp_btn.addEventListener (MouseEvent.MOUSE_OUT, _wcComp);

  internal _wcComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans wcArray)}

  Item.visible =! item.visible = false;

  }

  }

  Currently run 1050 error: impossible to assign a value, not reference.

  The text in blue works with 2 clips of film acArray of course, where the attempt to use the mouse on.

  Any advice on the solution or the best method to implement would be greatly appreciated.

  For what you're trying to make a table is more complication than a solution, you have already divided in two arrays anyway probably due to this tax... and have two buttons to do isn't necessary, but you may already be knowing that since you have only code for one of them in any case.

  All you need is a button that activates the visible properties to their opposites.

  var array: Array = [myMovieclip2, myMovieclip3, myMovieclip1, myMovieclip4];

  myMovieClip1.visible = myMovieclip2.visible = false;  or the other two... depending on what initially as invisible

  btn.addEventListener (MouseEvent.CLICK, _acComp);

  function _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans tableau)}

  Item.visible =! item.visible;

  }

  }

  LF, you must have two buttons to do the opposite, as you say, then clicking on buttons must end up affecting all the buttons, no not only one of the tables you have done.  If each button should do what you say, then you should not use the! operator since that can go the opposite of what you intend, so you must assign the desired state.

  var wcArray:Array = [myMovieclip1, myMovieclip2];

  var acArray:Array = [myMovieclip3, myMovieclip4];

  acComp_btn.addEventListener (MouseEvent.CLICK, _acComp);

  function _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans acArray)}

  Item.Visible = false;

  }

  for each {(var item2:MovieClip in wcArray)

  Item2.Visible = true;

  }

  }

  wcComp_btn.addEventListener (MouseEvent.CLICK, _wcComp);

  function _wcComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans wcArray)}

  Item.Visible = false;

  }

  for each {(var item2:MovieClip in acArray)

  Item2.Visible = true;

  }

  }

• Continue after the end of the Movie Clip on the timeline

  Hello:

  So far so good. But I need the timeline to keep playing after the end of my MC.

  From now on chassis #45 of my calendar, I have this script on my scripts layer:

  / * Stop to this image

  The Flash timeline will be stop/pause on the frame where you insert this code.

  Can also be used to stop/pause the chronology of the movieclips.

  */

  Stop();

  / * Play a Clip

  Play the clip specified on stage.

  Directions for use:

  1 use this code for the video clips that are currently stopped.

  */

  Video.Play ();

  All so far works fine, but after the end of the MC (fl.video.FLVPlayback), it does not continue down the timeline to the end.

  Any help, please?

  Thank you very much.

  use:

  / * Stop to this image

  The Flash timeline will be stop/pause on the frame where you insert this code.

  Can also be used to stop/pause the chronology of the movieclips.

  */

  Stop();

  / * Play a Clip

  Play the clip specified on stage.

  Directions for use:

  1 use this code for the video clips that are currently stopped.

  */

  Video.Play ();

  Video.addEventListener (Event.COMPLETE, completeF);
  function completeF(e:Event):void {}
  Play();
  }

• Verification of the Movie Clip instance

  Is it possible to check if a case of button is available on a certain range?

  i.e.

  Frame 1 has the following movie clips

  a_btn

  b_btn

  c_btn

  Frame 2 has the following movie clips

  a_btn

  c_btn

  I want to check if buttons a, b, c, is available on picture 2 and run a corresponding feature if condition 1 or condition 2 is met

  You can use a simple conditional to check if an object is present...

  {if (a_btn)}

  trace ("Yes");

  } else {}

  trace ("no");

  }

• How can I enlarge the movie clips? [with pictures]

  

  There are 9 video clips in each square (object) and the color in each video clip can be changed by mouse click.

  
  However, if I want one of the spaces enlarge by clicking on it, then I can click on each video clips to change the color.

  How can I do? Can I create another movie clip and cover the place to click to enlarge?

  Please help me! Thank you!!!

  AS2 or AS3? AS2, you can disable the movieclip which is clicked by mc.enabled = false; For AS3, you can either remove the event listener as mc.removeEventListener ("your event type used listener", onClickFunc) or you can add a flag (Boolean variable) you set to false when it was enlarged and use it to check your onClickFunc and decide whether to change the color of a movieclip or not.

• Clickable button inside the movie clip symbol?

  I would like to know how I can have clickable buttons inside a movie clip symbol.
  
  
  Thank you.

  Your problem is mainly code compared to the location of objects location. When you start the file, the keys 1 to 8 are classified under code because they are visible, while the 9-11 thru buttons are not because they live in a non-current setting of the miniature timeline. When you switch to the side MORE things, these buttons is not any code assigned to them, and when you come back, the same is true for the first eight buttons because they were out of the picture and lost their connection to any code (the previous assignments have been already spent to frame 1 of the main timeline).

  What you should probably do is locate your button code for frames where the buttons in the thumbnail movieclip. In this way, their code is always where they are. The code of the keys 1 to 8 will be in frame 1 of the miniature clip and the code for 9 to 11 will be in frame 2. You need to change the code for the form:

  thumb1.onRelease = function() {}
  _parent.gotoAndPlay("1");
  };

  And you're going to do you a favor if you do not use the numbers of the labels.

• only to learn... helps on the movie clip buttons

  I tried tons of tutorials and I can't seem to get my movie clip button to work when I put the mouse over the button.
  
  I've included a screenshot of my line of time and code.
  
  Layer 10 Framework 1 where is the script.
  
  layer 'actions' has my codes 'stop' in frames 1 and 20
  
  code and schedule
  
  
  Thanks for your help.

  replace 'home' with 'this '. and if the compiler complains about your code in e.currentTarget as a MovieClip.

• Hi, I'm trying to enable my ipod touch to access the internet via an adhoc network on my computer microsoft vista but only get local only = for example no internet. Any suggestions?

  The ad hoc network is set up and seems to work with reception on the computer and the ipod. I tried it with ICS enabled on the side ad-hoc wireless and lan internet side with no luck. The TCP/IP protocol seem fine. The onlything that appears bad is that in the network and sharing window, network adhoc Committee has 'local only' in the access panel.

  Also all the sharing and discovery options are turned on as well.

  Any suggestions why internet is not going through?  Any help would be greatly appreciated.

  T dog

  Somehow I don't think that its going to work with mobile broadband

• Gradually change the volume of the audio clip

  I downloaded a few sound collections of sound effects from Adobe. Then, I learned how to change the volume of a particular sound effect by right clicking on it and choosing to Gain Audio.

  Now, I would like to ask if there is a way to change the volume just a part of an audio clip. In general, I just want to make the volume fade little by little towards the end of the clip.

  Moderators: Please delete this post. I just found Effects > Audtio Transitions > Crossfade > bland exponential

  I don't know how I missed it when I was exploring audio special effects earlier.

• AS3 putting the buttons inside the Movie Clip

  I'm practicing AS3 (after years of AS2) and can't have a button inside of a clip speaks to another clip on the main timeline. Here is the code:

  OneButton.addEventListener (MouseEvent.CLICK, OneButtonClicked);

  function OneButtonClicked(event:MouseEvent):void

  {

  MovieTarget.gotoAndStop (1);

  MovieDescription.gotoAndStop ("One");

  }

  TwoButton.addEventListener (MouseEvent.CLICK, TwoButtonClicked);

  function TwoButtonClicked(event:MouseEvent):void

  {

  MovieTarget.gotoAndStop (2);

  MovieDescription.gotoAndStop ("Two");

  }

  The code above works, but if I put OneButton and channels within a clip, I know can target the MovieTarget and MovieDescription. The reason that I want to put OneButton and strings inside it's own MC is so I can dim each hit after top by switching the playhead within this MC help. ? Thank you!

  Start from the beginning

  Press f8 and choose movieClip, then draw your button movie untoggled call then create another movie and create your button toggled or grayed button and call it greyedButton.  Go to the main stage add 2 instances of button and 2 greyedButton (just drag the library).  you have 4 instances on stage.  give the name of the instances of appeal and place them one over the other so you can see 2 buttons on the stage.  put the button greyed under the button.

  now with action script

  Button1.addEventListener (MouseEvent.CLICK, OneButtonClicked);

  function OneButtonClicked(event:MouseEvent):void

  {

  MovieTarget.gotoAndStop (1);

  MovieDescription.gotoAndStop ("One");

  Button1.visible = false; Here the button greyed will show

  }

  Button2.addEventListener (MouseEvent.CLICK, TwoButtonClicked);

  function TwoButtonClicked(event:MouseEvent):void

  {

  MovieTarget.gotoAndStop (2);

  MovieDescription.gotoAndStop ("Two");

  Button1.Visible = true; Here button1 will return to its orignal State

  Button2.visible = false / / here will show the button greyed

  }