Imaging T610 problem

Similar Questions

• Auto new imaging HP T610 problem

  I have a bunch of new T610s from HP that I need the image. I used one to create the environment I want, and I can manually copy this image to the HPDM, then manually deploy that image on a new (self discovered) thin client.

  When I add a "rule" for first Contact Rules:

  Name: Auto Image

  Filter set (all criteria, IP address contains 10.22 which is the first two parts of all our internal IP space, I really want to a filter that would say all/all) if I click on generate a list of devices, it shows all existing devices.

  Trigger: first Contact

  Operating system: HP WES/XPe

  Category: imagery

  : Model 20131118 rule (self created when I took the picture manually)

  Activated: ticks

  When I plug a new HP T610, it is automatically detected by HPDM (DHCP specifies the HPDM) and then proceeds to restart in a cycle, and never made the task of imagery.

  The HPDM log shows:

  Card to the master repository repository

  Special Envoy to the device management gateway

  Task has been retrieved by the Agent

  Task has been retrieved by the Agent

  Task has been retrieved by the Agent

  Task has been retrieved by the Agent

  Task has been retrieved by the Agent

  etc., until I cancel the job

  Reset the status of the task to cancelled

  Can someone tell what I could be doing wrong, or how I can make this work? Should I manually start a task image, is the "first time" works not properly, I have to narrow the filter to avoid 'already seen' devices somehow?

  Thanks for your suggestions.

  Thanks for your suggestion, I checked that the devices already come with the new version of the agent.

  I found/solved the problem, which I had changed the settings by default in:

  Tools-> Configuration-> task settings-> write filter, WOL and adjournment of the task

  I changed it to "run regardless of the State of the write filter.

  So obviously the thin client was sent to the statement to start the task of imaging, rebooted, then collected the statement again from the beginning etc... creation of the loop.

  Once I changed this back to the ' If write filter on restart to clean the overlay, to execute and to commit and then restart for commitment is taken into account ", everything works perfectly.

  Hope this helps someone else...

  Kind regards

  Adam

• disable hardware acceleration set my image loading problem. is there another way to get around this?

  System details:
  OS: Windows 8.1 Professional (64-bit)
  Graphics card: PNY NVidia GT 610 (2 GB)
  RAM: 5 GB
  Firefox version: 36.0 (32-bit)

  Since yesterday, when the images would load on Web sites, some of them would be entirely black, or black for the most part, with only a piece of the images loaded, only to fully charge a few minutes later.

  Disabling hardware acceleration has solved this problem, but reduces the overall performance of firefox. Is there another way to work around this problem, not to mention that disabling hardware acceleration?

  Note: The only 2 things I have tried have been reset firefox and a new installation of firefox. I don't want to lose my data of the addon and the custom settings of firefox, because it takes too much time for me to put them back where they are now.

  I'm also pretty computer savvy, if you can get quite technical with me. If I don't understand something, I ask.

  
  

• Since the installation of FF36beta to win 10, saving images has problem

  Hello

  Installation FF36beta, recording images having the problem, so when I select the folder and click on save, it will goes to savings but not saved and all time show 'unknown time remaining' and not made progress. but when I close Firefox, the next performance after a few moments, the image will be saved.
  I have tried to find the answer for fixing, clear history of downloads, disabling the addons Manager download, but are not fixed.

  I use windows 10 and since I installed windows 10, my browser FF 36 beta + updates.

  the problem has been fixed in the beta of FF 36 10

• Anyone who doesn't know how to fix this image backup problem?

  Try this post once again in the hope of getting an answer this time

  I continue to have this problem where Firefox is slow to respond during the recording of the images.

  When the problem occurs, and it does not happen often, I'll either ctrl + s or right-click, select "save image under...". "and after I click 'Save' I see it at the bottom right

  "One active download (remaining unknown).

  All the time which shows, Firefox is slow to react. As soon as he goes, Firefox is fine.

  Why Firefox is and what I can do about it?

  Also, why Firefox re - upload images to save them? Why can't we just save images by copying them from a cache, they are stored in display them in the browser window?

  I know of this add-on https://addons.mozilla.org/en-US/firefox/addon/3404/ and I, but it is useful when I want to record multiple images in a folder. When I want to, for example, save an image of 'good work', the other "wallpaper," the other "show family" and so on, it is heavy.

  This can be a problem with the anti-virus control that Firefox runs, calling your AV software once the download is complete.

  See http://kb.mozillazine.org/Unable_to_save_or_download_files

• IMAQ JPEG image conversion problem string

  Hi, I'm using the format JPEG decode VI to decode an image string I get a camera at Black fins. It works fine when I run VI himself, but when I use it as a subvi the program crashes. Anyone have advice?

  This is a picture of my program

  

  It's the way the file is returned to the camera

  'I '.

  «#IMJxs0s1s2s3...» »

  Enter the JPEG compressed video image x = size of the frame in pixels: 1 = 80 x 64, 3 = 160 x 120, 5 = 320 x 240, 7 = 640 x 480, 9 = 1280 x 1024 s0s1s2s3 = size of the image in bytes (s0 * 256 ^ 0 + s1 * 256 ^ 1 + s2 * 256 ^ 2 + s3 * 256 ^ 3). ... = full frame JPEG Note that sometimes the 'I' command returns nothing if the robot camera is busy, then the 'I' command should be called as many times as necessary until a framework is returned

  I changed the format JPEG decode VI by changing the plans of red and blue color. I don't know if this caused the problem though.

  Hello

  This can be useful for you:

  http://forums.NI.com/NI/board/message?board.ID=200&message.ID=21845#M21845

  Andrey.

• ISO image installation problems under Windows 8 Pro

  Whenever I try to mount the ISO with the integrated installation of Windows 8 Pro it returns "could not mount file" 'Sorry there was a problem, the cut file' or 'the disk image file is corrupted.

  In some cases, the file gets however mounted, but to find out, I have to watch computer containing all the readers.

  In each case, whenever I drop an ISO that contains audio from SACD or other media, danslechamp of J River Media Center 'Play now', it shows every single track file picture disc and plays well. So he does, even when burned on a DVD + R, then, obviously, the ISOs are healthy and should the problem with Windows...

  I'd be happy to hear from you on this subject.

  The file must be renamed to .exe on the Microsoft site.  This is an executable, not an ISO standard

  (Visio 2013 64 bit in English)

  OK guys, I FOUND THE SOLUTION by chance.

  Here's how to solve the problem (at least it worked immediately when I did it, then try it!)

  Right click on the image in question file (.) IMG. ISO, etc...) and choose a default program to open with. WIndows MUST ABSOLUTELY BE the DEFAULT program to open the image files. There is a bug not declared on the Explorer of Windows 8 is not not the default value, which is not to open an image file valid, not corrupted.  YOU MUST set the default Windows Explorer to mount as a virtual DVD drive image files in WIndows 8.

  That's all and I hope it works for you. Thank you! and if it works, please mark this as useful to show your appreciation, because there is no button of congratulations or thanks. : D

  Here what I was doing, eject the SD card (you don't have to get out of the computer).  Try to mount again.  I did it and it worked perfectly.

• Image key problem.

  I work through a tutorial from Lynda.com ' after effects apprentice 02: basic Animation. I use after effects CC on an iMac 10.11.6. In the movie tutorial, a starting keyframe is created to position 00,00,00 on the Timeline. When the current-time indicator moves along the timeline of the position of the next keyframe, the image in the Comps panel remains visible and can be manipulated in the desired position. However, when I do the same thing, I find that the image in the Comps panel disappears after I move the time indicator since the first keyframe position, I can't see the image, to move it where I want it in the second keyframe. I don't know how to keep visible when you move the current time indicator. If it was Flash, I insert a few blank F5 key frames, so that the image is visible between the keyframes. But I don't know how to keep the folded image between keyframes in After Effects. It is not explained in the tutorials; the image remains visible, without any explanation how. Can someone tell me how to solve this problem?

  Thanks for any advice.

  AH HA! Here's your culprit:

  

  you (or someone else) imported graphics as a Tiff sequence instead of a still

  

  the import dialog box was checked on Tiff sequence

  

  and this isn't what you want. what you need to do now is to replace the file with a Tif just yet. you do that by right-clicking on the file in the project window-> replace footage-> file and then you find the file, clear the tif sequence box, click Import. This will replace the sequence with the rest. now, you will be able to drag your tif layer in the timeline for as long as you want.

• ADF Image rendering problem.

  Hi all

  I use Jdev 11.1.1.6. I am facing a problem with image rendering. I have a picture on jspx page that contains the behavior of the popup. Inside the pop-up window, I have a search engine (custom search).

  Initially when the page goes for the first time. I can able to see the image, but when I perform a search operation, I'm unable to see the Image (picture).

  According to my observation.

  When the page is displayed for the first time, the URL of the image source is:

  http://www.xyz.com/workflow/Project1UI/faces/images/search-icon.jpg

  After searching the source image is modified to:

  http://www.xyz.com/workflow/Project1UI/faces/pagename/images/search-icon.jpg (name of the page is JSPX page name)

  Code:

  < af:image source = "images/search-icon. JPG"id ="i2">

  "" < af:showPopupBehavior popupId = ': p1 '.

  triggerType = "click on" / >

  < / af:image >

  < af:popup id = "p1" contentDelivery = "immediate".

  autoCancel = "disabled" childCreation = "deferred."

  Binding = "#{NPACreateProjectBean.POP1}" >

  < af:dialog id = "d3" type is 'none' styleClass is "AFStretchWidth" >

  < af:panelGroupLayout id = "pgl17" >

  < af:panelFormLayout id = "pfl10" >

  < af:inputText value = "#{bindings.cnFilter.inputValue} '"

  label = "#{Bindings.cnFilter.hints.label} '"

  required = "#{Bindings.cnFilter.hints.Mandatory} '"

  Columns = "#{Bindings.cnFilter.hints.DisplayWidth} '"

  maximumLength = "#{bindings.cnFilter.hints.precision} '"

  shortDesc = "#{bindings.cnFilter.hints.tooltip} '"

  ID = "it12.

  Binding = "#{NPACreateProjectBean.I1} '"

  rendered = "false" >

  < f: validator binding="#{bindings.cnFilter.validator}"/ >

  < / af:inputText >

  < af:commandButton

  Text = "SearchUsers.

  Disabled = "#{!}" bindings. SearchUsers.enabled}.

  ID = "cb1".

  actionListener = "#{NPACreateProjectBean.onSearch}" / >

  < / af:panelFormLayout >

  < / af:panelGroupLayout >

  < af:spacer width = "10" height = "10" id = "s14" / >

  < / af:dialog >

  < / af:popup >

  Concerning

  Ilhem

  Instead of

  You can try with

  Thank you

• image path problem

  Hi all

  I installed apex 5 on windows 8.1 with ADR 3.

  When I configured with the pl/sql gateway, I could open the apex very well.

  but oracle says it is depricated and that we should be using restful services.

  now, when I tried to use restful services by disabling the pl/sql gateway and by running the stand-alone mode of ADR iin.

  java-jar ords.war

  When I navigate to the url

  localhost: 8080 / ADR

  I get this error

  There is a problem with your environment because Application Express not having files not loaded. Please check that you copied the images directory on your application server by following the instructions in the Setup Guide. Also, please check that your image prefix path is correct. Is your current path (it must contain both starting and ending oblique lines, such as the default/i /). Use the SQL script reset_image_prefix.sql if you need to change.

  

  Please guide me how to solve this problem?

  Thank you.

  Hi Maahjoor,

  Maahjoor wrote:

  somehow, I managed as below

  I disabled the mod pl/sql

  I run @apxldmig.sql directory (because my record of the apex is a little less app folder.)

  then I followed the documentations for the glass fish-Server deployment

  and finally I copy and rename ords/conf/apex_pu.xml to ords/conf/apex.xml

  and I was able to deploy on the glassfish server.

  Using the apxldimg.sql script is not required to load images in the ADR. The script is being used to load images in Embedded PL/SQL gateway when configuring EPG as a web server for Oracle APEX.

  If you want to set up images for Standalone ORDS and then use the following command:

  java -jar ords.war standalone --apex-images C:\app\apex\images
  

  You deploy ADR Oracle Glassfish Server (no need to order above) follow these steps:

  • Create an i.war using the following command:

  java -jar ords.war static C:\app\apex\images
  

  This command will create i.war with your reference to static images.

  Reference: http://docs.oracle.com/cd/E56351_01/doc.30/e56293/install.htm#AELIG7044

  • Log-in in the Glassfish Server Admin Console and deploy the i.war:

  Reference: http://docs.oracle.com/cd/E56351_01/doc.30/e56293/install.htm#AELIG7222

  For more information consult: ADR deployment on Glassfish Server

  Kind regards

  Kiran

• Resizing of Image CS6 problems

  I tried to resize these images, I bought on shutterstock for a book cover, and every time that I go to image > image size and put in smaller dimensions, it is resized my canvas together and not only the image! Can someone help me? This seems like an easy solution, but for some reason that I can't understand why it is not just resize my image. I tried Ctrl T and then enter the corner while the change of outfit and that will work, but my problem is when I export as .psd file and then place it in an Indesign file, the photos are all pixelated and blurry.

  You get a better understanding of basic Digital Image Processing and how Photoshop works.  Photoshop is quite complex and all operations are not intuitive.  Photoshop has to be learned and a huge learning curve, you need to understand the basics. Power of Photoshop is in layers and there are several types.  Tool generally work on a single layer, but the size of the Image is an exception, it works on all layers in a document.

  Image resizing is done in two ways, and is controlled by the resample checkbox.  When the checkbox is unchecked is not that a single Pixel will be changed . The picture is adjusted simply by changing the value of resolution of images.  The size of the image is change by changing the pixel size images will be printed. More you pixels the image will print the image will become soft, but if you use 1 foot x 1 foot pixels, you may be able to see the image 100 yards away on a billboard.  When the same image printed with "1/300 of 1/300" 90 000 pixels per square inch would be a simple point seen 100 yards away.   Scalability and the image by changing the Image resolution doe not change the proportions of images or effect the image quality.

  The other dimensions of the part resizes using resampling (interpolation).   When interpolate you an image you always lose image quality.   Not a single pixel you have for your image will be exist at the end of the process of interpolation.  You will have a whole new image. Celles‑CI are calculated by interpolation of pixels you currently for you image.  You will have more pixels or fewer pixels you had before the process of interpolation.  If you have less interpolation process by here a few details that you had prior to interpolation.  If you have more pixels the details of the created process interpolation for your image you do not capture the details, maybe. You can also change the proportions of the Image in the process will distort the image well.

  There are times to interpolate.  Images large high-resolution camera has reduced in the count of pixels to fit in the Web Pages for screens are not able to change the size in pixels. They display the image to their fixed resolution, they cannot display an image in the images resolution setting.

  If you want to view print clogs and personal to see the details of the image, you need to print at a high resolution and the need for the number of pixels to print the image to the size you want.  If the count of pixels you in deca interpolation upward in size can improve the print quality.

  How much image quality is lost by interpolation has a lot to do with how changing the grid size is.  If you through way too you some detailed left you create too many details, you have a soft blur.

  Convert your Image layer to a smart object layer and change just the scale layer live free transform and trim add a layer mask. Smart object layer pixel may not be actually interpolated just processing the composite view of dynamic object layer be changed.  In this way, you can change the transformation as several times if necessary and you worry about loss of image quality accumulates for the image of the dynamic object is still not turned the last transformation interpolation.

• Imaging appearance problems

  Hello
  Import a mpg file, it happens to me a problem never before met report l / h.
  It's the structure of the original mpg files, play with Media Player Classic Home Cinema.

  

  
  

  
  

  Is the framework of the file imported into first

  

  
  

  The image is cut off on the right side, I tried to act both on the sequence that the proportions of the pixels in the file, nothing to do.
  Any suggestions where to act?
  
  Thank you

  Thank you for the information, it seems to be the same as my problem.
  I continue my discussion in this thread. Re: Adobe Premiere Pro automatically crops video Source on import
  Greetings

• Basic image size problem

  Seems I have lost a few basics about the sizes of the image.

  When I create a new image, I want image must be made up of centimeters, not pixel, because the pixels do not tell me anything of the physical size of the future picture. So, when I do the new image to 4 x 6 cm, seems that Photoshop does not know is that a cm! So I have to manually "guess" how pixels are there a cm in order to make this cm as real as a 'leader of real life".

  I am sure that this problem has been asked several times, but I have not found the exact type. I know that Photoshop does not know how many pixels my LCD has, that's why he asks on pixels per inch or pixels per cm in order to create a picture.

  I would have this problem solved somehow, so that when I create a data mm image into a square, Photoshop CS would know the pixels in my monitor and I would not guess pixels...

  Basically speaking how to create an image with the "actual size"?

  

  When you create a new file, you can set this specification.

  Also, with one trust you open and view > leaders verified, by right click on the rule you can make that adjustment

  

  If, however, you want to set your res file so that it matches the actual size measured with a ruler, follow these instructions:

  For the image that will be presented to a cm on your monitor is a cm of the image, you must determine the resolution of your screen. Here's how:

  1. open a new file: 500 px of width and depth.

  2 see 100% of the size.

  3. use a rule. Measure the width of the image to the screen in cm.

  4 divide 500 by the width of the screen image.

  Result: Resolution of the screen in terms of pixels per cm.

  Next:

  Define your image at this resolution by going to:

  Image > Image size

  Enter the size of the Document screen resolution: resolution field

  ***

  Don't forget: This allows you to create a match of sovereign of image and is not designed for sovereign-to-print match because its resolution is probably too low for quality reproduction. It would be wise to make an image of dupe for your rule of corresponding image.

• Image width problem

  Hi, I put rectangles, put them as full width and filled with my image.

  The problem is they disply on my screen, on larger screens, the bottom of the image is cut off.

  If I want the image so that they display in their entirety on the screens, they become too big to display on the smaller.

  ive tried scale to adapt, evolve to fill etc, but nothing does.

  Help, please

  my site is

  Untitled 8

  screenshot of the biggest screen

  

  You can also see the elements thatcertain sit centered where they should (logo circles right not centered on the line), but muse.

  Please help, this is driving me crazy

  Thank you

  Jay

  You can use the option of filling slideshow or browser full-screen for the image they will make even across different screen sizes.

  Thank you

  Sanjit

• Image webcam problems

  I don't know if it's the right place, but I'll give it a shot.

  I have a HP Pavilion dm4 which was only a few months old - I think I got it back in June / early July. I was trying to use Skype for the first time on this computer yesterday and my webcam and the microphone seemed to work for a second, but then my microphone stopped working and my webcam go haywire. I can say it's always pick up images, because when I tested it I could see sort of a pixelated blob that seemed to be my head. But... Well well... Since then, whatever it is the webcam records looks like this: http://i151.photobucket.com/albums/s125/Kittty_catt/wtfisthis.png

  It's a screenshot directly from my office, is said by the way. I don't know if my microphone does not work yet or not. I went through the hardware section of the Control Panel, and he says that the webcam was working properly, so I have no idea what it does. I restarted my computer, I tried to clean up the camera, I tried to say to look for new drivers (he said they were all to date) so frankly, that I'm at a loss.

  Can someone help me with this? I would be very happy!

  This is certainly not a software or a driver problem. The cable from the webcam and the microphone went faulty or loose causing this problem. I guess you need to contact HP and get the laptop sent for repair as its still under warranty