Similar Questions

• Compatibility with LabVIEW Windows 8

  Windows 8 will come out in a week. I am looking to buy a new PC to run labview on and I can't find whether or not LV2011/LV2012 will run on Windows 8 or not.

  And nothing said about it yet?

  It is a good resource for all your Windows 8 related questions: http://www.ni.com/windows8/

  I hope this helps!

• Not compatible with Labview 2014 IMAQ?

  I try to work with a National Instruments / SuperDroid Robots SD6 ( https://decibel.ni.com/content/docs/DOC-18528 ) now... Everyting connects fine using LabVIEW 2014 with the module of Robotics with the exception of the functionality of the camera. When you use the solutions provided LabVIEW cannot find dependencies IMAQ.

  I checked to make sure that I have the module installed and I see IMAQ 4.9 and IMAQdx 4.3.5 MAX

  Check the newsletter below on the compatibility of the IMAQ, she only has not 2014 listed

  http://digital.NI.com/public.nsf/allkb/DB928F6D5E9D6B97862579A7006B2850

  Specifically, I need the 2014 Image processing module version in the link below. The download link says 2013 and during the installation process, I don't see an option for support for 2014.

  http://www.NI.com/gate/GB/GB_EVALTLKTSIGPROC/us

  Is there a trial version of this software that is compatible with LabVIEW 2014?

  I was able to get in touch with a sales engineer and I need to image processing module is not yet available for LabVIEW 2014. Where my question.

• Control with Labview instead of MAX PCI-1422

  Hello Experts,

  I need your help in one of my problem. I have a camera of sensors unlimited that is SU - 640 1.7 RT - D and a card parallel NI PCI-1422. I can use and acquire data with power MAXI of the camera, but I want to exploit, use and acquire images from the camera by using LabView. Is it possible to export or using the camera with Labview instead to write fresh code in LabView?

  LabView offers it all support or bed automatically PCI-1422 or any possible solution that I get the code for the use of this device block diagram in LabView.

  Please let me know, answer.

  For any help or suggestion will be highly appreciated.

  Thanks in advance!

  Hi David,

  You can use the function IMAQ write file to record the images to the disc. Please see the link for an example below.

  IMAQ writing file 2 VI

  http://zone.NI.com/reference/en-XX/help/370281M-01/imaqvision/imaq_write_file_2/#IMAQWriteJPEGFile2

  IMAQdx enter and save individual files

  https://decibel.NI.com/content/docs/doc-19537

• How to access the pci 9054 with labview

  Using pci9054 for communication, how can IAM I configure pci 9054 with labview.

  Thanks for your reply,

  I have 6 months experience in programming.

• Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and IMAQ Cheers acquisition image vision module

  Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and image acquisition IMAQCheers vision module

  Hi, I use a 1.4MP USB camera with LabView. The brand is ID - a German company.

• Integrate the external trigger into camera (PCI-1424)

  Hi all

  I use a PCI 1424 acquisition card to take the image of a Kodak "camera".

  Currently, I put the camera on a continuous mode - in which the camera give me frames one after one. I am able to 'snap' or 'capture' images of MAX with the help of the camera file. I can write a simple VI for 'break' a single image in LabVIEW.

  Now, I want to go to the single camera viewing mode. In this mode, the unit will display a single image to a trigger signal (the rising edge of a singal TTL).

  I wrote a short program for parallel port allows to send this signal triggered at the camera. The increase in power to the camera temporialy, I know that the camera captures an image.

  However, the question is how can I nathalie caron this image?

  What I do now, is to select 'snap' a picture to the MAX and allow a delay of 10 sec. After you click on the snap, I'll go to LabVIEW and send the trigger signal to the camera.

  However, in MAX, I altenativley had a black and white image that is of the Court a false image.

  does anyone know the reason?

  and how do I integrate the VI trigger in the captuire VI image, so that I can finish the task of single capture inside a VI?

  There is a sample VI "Grab.vi triggered" in which user can set waiting time and other properties for IMAQ1394, but I do not know how to PCI1424

  Thank you very much.

  Dear John,

  I have attached this VI.

  LabVIEW 7.1

  Framegrabber: PCI 1424

  Trigger the camera: after set us the camera in mode single shot (by rider material), I just need to send a signal of TTL and the camera will trigger in the front of this signal. So I schedule a pulse to the OID 0 pins at this TTL signal output.

• Using controls IMAQ Image in steps of LabVIEW

  Hi guys

  So far, I used TestStand 4.0 with LabVIEW 8.5 and Vision Development Module 8.5 with no problems. Recently, I've updated to LV 8.6 and 8.6 VDM. I started having weird problems when using LabVIEW steps with input/output containing IMAQ Image controls. When I try to click on such an approach in the seq editor or try to insert a new step in the sequence, the initialization step takes a long time (a few tens of seconds) or completely freezes. I also tried to upgrade TS to version 4.1, but no difference. Also, my colleague experiences very similar symptoms on the same software configuration. The only difference is that on his machine, it takes only a few seconds when you click on the step in the vision. However, the steps containing only not an IMAQ Image control behave normally, i.e. you will not encounter any "time initialization" when clicking on it in the sequence.

  To illustrate, I enclose a simple VI containing nothing more than a single Image IMAQ control. If you don't link to the connector pane, the VI works fine when it is inserted in a time of TS. If the Image IMAQ control is bound to the connector pane, TS freezes when inserting such an approach.

  Vladimir

  The problem that causes this problem has been identified.  More information is available here: with TestStand and LabVIEW 8.6 known compatibility issues

• NOR-DAQmx compatibility with the system in real time

  I try to use a time system 11 with LabVIEW Real-time. When I try to connect with the driver OR DAQmx, an error saying that the version of the NOR-DAQmx drivers are bundles with the one on the real time. I tried to use different versions of the NOR-DAQmx drivers that are available in the table of compatibility, but not those who worked. I have an old computer working with the same real-time system that uses LabVIEW 9 and has the driver NOR-DAQmx 9.3.5 f0 driver installed on it but I can't find the drivers on the web. What should I do?

  I am using LabVIEW 2015 in my current computer.

  Thanks in advance.

  Looks like you can just have a lag in the versions of software installed on your host computer and the target.  In order to deploy the code from your host to your target, the two must have corresponding to libraries of functions.  See this link for instructions on updated versions of the software on your target match those installed on your host computer, the wizard of the LabVIEW RT software.  If you have already done this, and it did not help, please provide a screenshot or error code of the message that is to appear.

• upgrade to labview 2013 problems now with labview 8.6

  Upgrade to Labview 2013 a few days ago and framework installation changed my MAX existing since version 5.1 to version 5.5 with CAN 2.7.5.

  Because all my previous software was written in version 8.6 and customer requirements, this can not be changed and if I need 'backward compatibility '.

  However check the supported versions in CAN it only seems to go back as far as Labview version 10.0?

  Worse still, when I try and load any program written in LabVIEW 8.6 8.6 I now get "cannot find file" for the DAQMX as

  DAQMX------Write.llb------DAQMX------Write.vi etc.

  Tried the navigation in the folder named "MAX."

  The questions are:

  What I have to remove and MAX and re - install the earler versions for compatibility with 8.6?

  If so this can be done without removing my 8.6 install/2013 installs?

  Yes, the new DAQmx versions are not compatible with LabVIEW 8.X.  You can just uninstall DAQmx and then install your previous version to restore your support 8.6, but you will have lost the support of DAQmx for 2013.

• Code sharing with LabVIEW SP1

  I'm working on a project involving the treatment of video information with some students.  We all 2015 LabVIEW installed on our computers and keep the project LabVIEW code in a Subversion repository to which all religiously to validate and update.

  If I install the LabVIEW 2015 SP1 upgrade (from the USB of the spring of 2016), I have 'break' the opportunity to share the code with them?  I noticed that the update of LabVIEW (probably) gives me the opportunity to move from elements isolated to SP1, but I have not (yet) do, and I am sure that they, also, have not improved.

  I know that to install a new version (for example LabVIEW 2016, in August), he would have us all to upgrade 'in parallel', but I don't remember any discussion on the problems of compatibility between a release and Service Pack version.

  Does anyone have knowledge or sufficient experience to say 'go ahead' or 'wait '?  [OR, feel free to chime in with the Authoritative Answer...]

  Bob Schor

  I'm never more than one version of service pack break compatibility with the 'main' version, even if it may take more time to open your code because each switch between the basic versions and service pack will probably force a recompilation.

• The jury of ELVIS will work with LabVIEW Student Edition 2010

  Hello

  This question was asked in the forums of LabVIEW, but no solution has been found. I have a windows 7 x 64 machine with LabVIEW 2010 Student Edition. When I try to install ELVIS 3.0.5 traditional software I get the following (no error code) message: "this Setup program requires the LabVIEW 8.5 development system or later to be present on this computer. Development system LabVIEW Base in any version of LabVIEW is not supported. Please install LabVIEW and then rerun setup of NI ELVIS. »

  I also installed the DAQ software for PCI DAQ board. I do not have access to a 32 bit machine and do not know how to get my board work (no ELVIS II) ELVIS. I have provided a screen shot of the message during the installation of the software of ELVIS.

  .

  Hey dduong16,

  Thank you very much for taking the time to provide additional information. After talking with several experts about your system, we concluded that this error is the result of an incompatibility between 3.0.5 Elvis and LabVIEW 2010 64-bit. Even the latest drivers of Elvis are not yet supported by 64-bit LabVIEW: see notes in support of the operating system on the Readme Elvismx 4.2.3

  To solve your problem, you will need to uninstall the 64-bit version of LabVIEW and install a 32-bit version. If you are a student, you should be able to get this version of your computer (it will work fine with your Windows 7 64-bit OS - it will install on 32-bit OS emulated inherent in your system). If you are not a student, please send me a personal message, and we will be working with an account representative to get you the necessary version.

  I apologize for the inconvenience, this made you and appreciate your patience. We have updated the Elvis 3.0.5 Readme to reflect this incompatibility (the change may not appear yet, because it takes time to propagate through our system), and I'm trying to create a Base of knowledge on the subject article to help future users who encounter this error.

  If there is anything else that I can help you, please you after return. Thank you!

  ~ kgarrett

• using NI USB 9201 with LabVIEW Real-time

  Hello

  I try to use a USB of NI 9201 on a remote real-time target. Here's what I did: 1) tricked out of a desktop PC to serve as target RT using the instructions provided on the Web site of NOR. He now starts in an RTOS with LabView RTOS 9.0. (2) I communicated successfully with the help of a host computer that has a windows with LabView 2009 BONE and I installed the software from the computer remote RT target host using ethernet. However, my problem is when I plug NI 9201 USB on the target RT that I do not see the material listed on the devices tab in MAX and interfaces on remote systems. I tried to get the manuals for the HW 9201, but it seems not much explained here, or maybe I'm looking in the wrong places. Any help is greatly appreciated.

  PS: I am attaching 2 JPEGs for additional explanations (tab network settings and the settings of the system).

  Thanks in advance,

  Benoit.

  AVS,

  9201 USB is not supported on RTPCs please visit this link. Currently no usb-DAQ devices do not support an environment CRPC. Only the PCI DAQ devices are supported.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/6913

• Installation DAQmx 9.1.1 with LabView 8.2, but focused on the acquisition of library data do not appear

  I'm under LabView 8.2 on Windows XP, with an NI PCI-MIO-16XE-50 card. I tried to install DAQmx 9.1.1 on my system, but libraries DAQ do they not appear in the folder C:\Program NIUninstaller Instruments\LabVIEW 8.2\vi.lib.

  Here is the chronology of the events:

  After you add the DAQ card to my computer, I installed DAQmx 9.4. When I learned that 9.4 DAQmx is incompatible with LabView 8.2, I uninstalled and replaced with DAQmx 9.1.1 and installed the patch.

  I can see my device in MAX, but DAQ Assistant is not listed under functions > Express > entry in LabView.

  From advice on forums, I tried using Add/Remove programs to change NI DAQmx 9.1.1. Under 'Application Development Support' I see "Support of LabView 8.2" has a green check mark, but the text in the right panel says "this feature will not be installed. A newer version of this product is already installed on your computer. »

  I tried to "Repair" NI DAQmx 9.1.1 (and patch), but did not see a difference.

  I guess I need to uninstall the latest version of "Support of LabVIEW 8.2" before installing OR-DAQ 9.1.1, but there is no element of that name in Add/Remove Programs > National Instruments software. How uninstall this version of LabView Support for DAQmx 9.1.1 will install correctly?

  Or, if this is not the source of my problem, what is?

  Thank you!

  
  

• Impossible to test, check, calibrate the card (PCI-6221) DAQ with MAX

  Hello

  We bought a PCI-6221 DAQ card and we have installed. However, it seems that the device is not recognized. First of all, it appears as a device in the PXI system then that is a PXI system. Then, I don't have access to the 'properties', 'self test' and "to calibrate" menu. This issue should be linked to the first.

  I tried to remove the driver and install it again, but it didn't work, so I tried the update but it is the latest version. Is there a problem with the driver?

  I checked with Labview if it was possible to use it, but no devices were found by the DAQ assistant. We have the whole NI Developer Suite 2009.

  Thank you for your time

  Cedric THOMAS

  Hello

  It works! Great! Thank you very much for your help.

  However, does this mean that DAQmx 8.8 is having trouble with the PCI-6221 device? Or I made a mistake during installation (but I have followed the manual)...

  I even can I create a simulated device also. That I couldn't do before with MAX 4.5.

  Thank you

  Cedric