IMAQ resample invalid image type

Similar Questions

• invalid image type imaqdx

  Hello

  I hope that someone help me find the error in my VI. I'm changing the optical tracking workflow capability. Instead of part of the reading of a file, so I want to collect the camera recording.

  You will find attached the VI.

  Thanks for your help.

  Hello

  Your problem is the distribution of a bad image. It works:

  

  Your code is quite messy...

  In any case, I had an old example that I've modified, you may find it useful (tying for Labview 2010).

  Run the program, select the keypoints (hold ctrl + left click for multiple). When you select keypoints, add them (via the 'Add' button) and the execution of the main loop with "continue...". ', take care that the object of interest is not moving (you can reprogram it at your leisure).

  I hope this helps.

  Best regards

  K

• -1074396080 color plans 'invalid image type' extract

  I received the above error under LV 8.5, so I searched and found this example:

  http://digital.NI.com/public.nsf/ad0f282819902a1986256f79005462b1/20ab177016de51c0c1256f03006a74cb/$FILE/ExtractColorPlane_Example.vi

  that includes two ExtractSingleColorPLane and ExtractColorPlanes vi.  The first works very well, but ExtractColorPlanes throw the same error that I was getting in my own code.

  Any suggestions?

  David

  If you take the extraction of several pieces of information of the same image, you should always keep this image in its original form.  Create additional image refs to store extracted information.

• Invalid Image - AVI file type + monkey plan color extract + threshold

  Hello

  I don't have a lot of experience on LabVIEW so far... This may be the reason why I'm faced with the following problem.

  I would like to open an AVI file and turn to get that information. That's why I tried a 'easy' step by opening the file, view, by modifying the file (single color plane Extraction) and showing that one too, after that the avi image enters the threshold function and appears as well.

  I use LV10. And when I run the vi 1074396080 error occurs (invalid Image Type). I tried to use different avi files but it still does not work. What Miss me?

  Thanks for your help!

  My vi:

  

  and the error:

  

  Use IMAQ create for you another image buffer to save an image.  Give it the name in levels of gray or something like that.  Connect the output of IMAQ Create at the Dst Image IMAQ ExtractSingleColorPlane entrance.

  Use IMAQ create for you a third image buffer to save an image.  Give him the binary name or something like that.  Wire out of the IMAQ create the Dst Image IMAQ threshold entry.

  You can put the screws to create IMAQ on the diagram outside the loop, just below the existing IMAQ create.

  Bruce

• IMAQ CREATE, image type setting

  Hello

  I'll put my f031b Pro Guppy camera pixel format.

  It seems too long I put attributes with property nodes: pixelformat as Mono 16, no matter what I put in the "IMAQ create"--->"image type", I still get output 16-bit gray scale.

  Is this correct?  What can control when I change the image type to "IMAQ Create"?

  best,

  Wen

  If the image is passed directly to the Image to get VI of IMAQdx, the type is unimportant since it is converted by the driver when it fills with data. Only the border size is relevant.

• IMAQ Low pass filter failed with invalid image border.

  Hi Expert,

  I'm trying to use the imaqLowPass function. I expect that the input image would have been handled by the low pass filter.

  But it is a runtime error showed 'invalid image border.

  Can someone tell me what is happening?

  Problem solved.

  I add a border to the image.

  He must take care of the size of the border and the size of the filter.

• Error 1074395720 has occurred to IMAQ find circular Edge 3 IMAQ Vision: invalid KING.

  Hello

  I am writing a program to adapt to a circle of an image (from the avi), but when running the IMAQ find circular edge v3.vi I get the error message:

  "Error 1074395720 occurred at IMAQ find circular Edge 3.

  Possible reasons

  IMAQ Vision: Invalid KING. "

  I use the vi KING of construct IMAQ to set the return on investment and I am sure that the KING output is in a format suitable for the discovery of the IMAQ circular edge v3 vi.

  I joined my program (Labview 2011)

  Any thoughts?

  Thank you very much

  Rory

  Hi Rory,

  Welcome to the Forums of NOR.

  «IMAQ find circular Edge 3' expects a return on investment for type 'Ring'.» There are a number of functions in labVIEW for the conversion of the type of return on investment as "IMAQ convert the KING to ring. However, as the circular edge VI find JUST does not ring but bounding box and other details as well, there is a strange solution to this problem.

  Drop-down "IMAQ convert KING ring" and get the return on investment through. Drop-down and then "Convert ring to the KING" (Yes, really) and pass the output of who to "find the circular edge.

  It is circular, strange workaround, but it seems to force the type of return on investment to go to the ring and so works.

  Let me know if you have any other questions.

  Thank you very much

• How to determine the image type in IMAQdx

  You can use the property IMAQ node to determine the image type when creating images.  However, when I try with IMAQdx I get 0 bits per pixel and I do not see a type as for IMAQ image.  I am creating 8-bit images when my camera is color.  How can I determine the image type of the camera file?

  

  Hi rammer,.

  IMAQdx exposes an attribute called "TypeOfImageInUse" that will give you the image type expected for the current settings of the camera. However, none of the functions that return an image IMAQdx will automatically convert the image to the format automatically, so you don't normally have to worry about this.

  I do not believe that the attribute is now directly exposed as his own property node, but you can use the CameraAttributes-> ActiveAttribute/ValueU32 those for questioning as any other attribute of dynamic camera.

  Eric

• Version with ControlLogix - link cRIO (implicit messaging), "(Code 16 #0315) problem" connection request error: invalid segment type ""

  I have developed and delivered a system in Germany several years ago.  He worked then.  But the cRIO was damaged and replaced by a newer model, and does not now.  I suspect (and Support technical OR agree) it's a problem of software version, which could be solved with the NOT-MAX Software Installer.  But I do not have access to the system myself, and correspondence is slow and tedious.

  The original system was a cRIO-9073, developed with LabView 2009.  He used the implicit Messaging.  The ID of Instance, sizes, IP addresses, etc everything has worked very well.

  The current system is a cRIO-9074, with LabView DURATION 14.0 (I guess that LV 2014), Scan Engine 4.3, NI - Industrial Communications for Ethernet/IP 14.0.0, etc.  Programs FPGA and processor are responsible and seem to work in the cRIO.  The "EthernetIP Set Assembly Instance Data.vi' will return no error.  But the PLC just pointing out "(Code 16 #0315)" connection request error: invalid segment type "."  We looked at intellectual property (the mistake was different), sizes and body #s.

  The PLC doesn't have to all be modified.

  Anyone know if there is no problem of compatibility with LV-2014 and Ethernet/IP 14.0.0?  Or if there are all the other required packages?

  I am including the NOT-Max reports.

  Hi ZX81

  To help you 2009 application to work with the new cRIO, you must deploy it to the device. You must in order to deploy the cRIO, make sure it has the same versions of software that you used with the old cRIO.

  You can format the cRIO NI MAX and deploy the application of LV, 2009. However, if you do not have access to the cRIO or your client does not have the necessary software, you can deploy the application in another cRIO with software (cRIO same model and same modules as your client) and create a picture of it and send it to your customer so that it can deploy the cRIO even without the software on his computer. The following document explains how to do this.

  Utility of RAD

  WenR

• charge of Picasa folder with the message "invalid image."

  disaster

  Windows xp that I screwed up somehow on Picasa, and now I have a file that loads with the message "invalid image."  Is it possible that I can fix these photos

  Contact support Picasa.

• Invalid Image path

  Hello

  I started having a few problems icon with an existing working version of my application that has already been built and uploaded to Apple without problem. When I now build this, I get the following errors of two icon;

  ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"

  ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"

  I managed to build and release this same .zip (expect a version and the version code change) in mid-August, but he now will no longer build. I have run back through aid and checked my path to icon, everything seems in order (and all the other icons are working / not to Miss).

  As follows, the referenced files in the config.xml file are different from those that Apple reported lack;

  < platform name ="ios" >

  <!-iPhone Spotlight and icon settings->
       < icon CBC = "res/icon/Icon-Small.png" width ="29" height ="29" />

       < icon CBC = "" res /icon[email protected] " " width ="58" height ="58" />

       < icon CBC = "" res /icon[email protected] " " width ="87" height ="87" />

  ...

  <!-IPad Pro->
  

       < icon CBC = "res/icon/Icon-167.png" width ="167" height ="167" />

  </ platform >

  I'm not referencing or other icon files Apple claim are missing for example; "[email protected]" and I can't that assume it is something BMPS incorrectly adds to my package when compiling?

  Note:

  I checked the build log and it seems to ignore my request for [email protected] one copy only the small and the small@2x:

  CopyPNGFile build/myapp.app/icon-small.png myapp/Resources/icons/icon-small.png

  / Project CD

  /Applications/XCode.app/Contents/developer/usr/bin/copypng-Compresser /project/myapp/Resources/icons/icon-small.png /project/build/myapp.app/icon-small.png

  CopyPNGFile build/myapp.app/ [email protected] myapp/resources/icons/[email protected]

  / Project CD

  /Applications/XCode.app/Contents/developer/usr/bin/copypng-Compresser/project/myapp/Resources/icons/[email protected] /project/build/myapp.app/ [email protected]

  Does anyone have any ideas or suggestions?

  See you soon.

  PS: PGB - app id is; 2244914

  Fixed - I was still building with an older version of Phonegap (5.4.1) for plugin compatibility and have increased now that 6.3.0, it includes such icons as expected.

  My guess is Apple now requires these files (from my generation) and Phonegap did not know what were these the 5.4.1 version.

  See you soon,.

• Several node Plugin - invalid attribute type: properties

  Hi all

  I have installation multi-user plugin. The workflow fails with the error "invalid attribute type: properties. One of the parameters on the flow of working remotely is a "Properties". It works fine without setting of type of properties. Y at - there no limitations on the types of parameters for multiple node plugin.

  Thank you

  Hello

  Looking at the source code of the plugin multi-Node, it seems that not all existing parameter types are supported, including Properties and the properties of table /. Not sure if this is the case of the design, or if it is an incomplete implementation / bug (it's probably the last).

• ORA-00902: invalid data type on xmltable

  Hello

  I learn XMLTABLE but not able to run the following queries,

  with xml11g as
  (
  select '<?xml version="1.0"?>
  <purchaseorder orderdate="1999-10-20">
    <shipto country="us">
      <name>alice smith</name>
      <street>123 maple street</street>
      <city>mill valley</city>
      <state>ca</state>
      <zip>90952</zip>
    </shipto>
    <billto country="us">
      <name>robert smith</name>
      <street>8 oak avenue</street>
      <city>old town</city>
      <state>pa</state>
      <zip>95819</zip>
    </billto>
    <comment>hurry, my lawn is going wild!</comment>
    <items>
      <item partnum="872-aa">
        <productname>lawnmower</productname>
        <quantity>1</quantity>
        <usprice>148.95</usprice>
        <comment>confirm this is electric</comment>
      </item>
      <item partnum="926-aa">
        <productname>baby monitor</productname>
        <quantity>1</quantity>
        <usprice>39.98</usprice>
        <shipdate>1999-05-21</shipdate>
      </item>
    </items>
  </purchaseorder>' myxml from dual
  )
  select s.*, b.*
  from xml11g t,
    xmltable ('/purchaseorder' passing
      xmlparse(document t.myxml)
      columns
        "shipto" xml,
        "billto" xml
      ) x,
      xmltable ('/shipto' passing x."shipto"
        columns
          "name" char(20),
          "street" char(40),
          "city" char(40),
          "state" char(2),
          "zip" number(10)
      ) s,
      xmltable ('/billto' passing x."billto"
        columns
          "name" char(20),
          "street" char(40),
          "city" char(40),
          "state" char(2),
          "zip" number(10)
      ) b;
  
  

  It is showing me special suite

  < zip > 90952 < / zip >

  *

  ERROR on line 10:

  ORA-00902: invalid data type

  Please guide me what I'm missing here.

  Thanks and greetings

  Alexander gelin

  For me the (slightly modified) works:

  [sql]

  	with xml11g as
  	(
  	Select '
  	Alice Smith
  	123 maple Street
  	Mill Valley
  	CA
  	90952
  	Robert Smith
  	8 Oak avenue
  	old town
  	PA
  	95819
  	Hurry, my lawn is going wild

  !                 lawn mower        1        148.95        confirm this is electric                    baby monitor        1        39.98        1999-05-21            "double myxml. ) Select *. of xml11g t.   XMLTable ('/ purchaseorder' by the way)     xmlParse (document t.myxml)     columns       "shipto" XMLtype,       "billto" XMLtype     )     x,     XMLTable ("' / shipto' passing x." ShipTo")       columns         'name' char (20)         , 40 "Street."         'city' 40,         'State' (2) tank.         "zip" INTEGER     + 1 ,     XMLTable ("' / billto' passing x." BillTo")       columns         'name' char (20),         40 "Street."         'city' 40,         'State' (2) tank.         "zip" INTEGER    

  ) b ;

  [SQL]

• From a function table: invalid data type error

  Hello
  
  I'm a ORA-00902: invalid data type error when I try to call the function from a select statement below. Here, I am leaving an array from a function.
  

  create or replace package pkg10
  as
  
  type tabletype1 is table of table1%rowtype
  index by binary_integer;
  
  function func1 return tabletype1;
  
  end pkg10;

  create or replace package body pkg10
  as
  
  function func1 return tabletype1 
  is
      v_tab1 tabletype1;
      idx integer;
  begin 
  
      idx := 1;
      
      for i in (select * from table1)
      loop
          v_tab1(idx).name1 := i.name1;
          v_tab1(idx).key := i.key;
          idx := idx+1;
          
      end loop;
  
  return v_tab1; 
  
  end func1; 
  
  end pkg10;

  select * from table(pkg10.func1);

  Please point out to me where I'm wrong.
  
  Thank you

  Sathya Vamsi says:
  Hello

  I'm a ORA-00902: invalid data type error when I try to call the function from a select statement below. Here, I am leaving an array from a function.

  create or replace package pkg10
  as
  
  type tabletype1 is table of table1%rowtype
  index by binary_integer;
  
  function func1 return tabletype1;
  
  end pkg10;
  

  create or replace package body pkg10
  as
  
  function func1 return tabletype1
  is
  v_tab1 tabletype1;
  idx integer;
  begin 
  
  idx := 1;
  
  for i in (select * from table1)
  loop
  v_tab1(idx).name1 := i.name1;
  v_tab1(idx).key := i.key;
  idx := idx+1;
  
  end loop;
  
  return v_tab1; 
  
  end func1; 
  
  end pkg10;
  

  select * from table(pkg10.func1);
  

  Please point out to me where I'm wrong.

  Thank you

  you try to use a data type of PL/SQL as part of an SQL statement. is NOT authorized.

• Invalid column Type error - Jdev 11.1.2.3 on Redhat 5.8

  Hello:
  
  I created a simple Web ADF application with a single table.
  
  Test1 uses the HR schema and the db connection is also HR and everything works fine.
  
  Test2 uses a (partner) schema that is different from the logged-in user (admininn) in about DB. In sqlplus, I can update the table as a logged-in user. For DB grants are ok.
  
  But in the ADF app, when I try an update, I get an error: exception for invalid column type. See error below.
  
  When the owner of the schema is different from the db connection, I get this error even if DB subsidies are in place. What Miss me?
  
  Thank you very much
  
  
  
  Note: the DB connection connects as admininn no PARTNER. But DB subsidies are in place to allow admininn associated schema update.
  
  [386] built select: "SELECT CLI_KEY, CLI_NAME, CLI_SHORT_NAME, CLI_TYPE, CLI_LAWSON_ID, CLI_ACTIVE, CLI_COUNTRY PARTNER. CLIENTS Clients
  [387] enforcement of LOCKING... SELECT CLI_KEY, CLI_NAME, CLI_SHORT_NAME, CLI_TYPE, CLI_LAWSON_ID, CLI_ACTIVE, CLI_COUNTRY PARTNER. The CUSTOMERS Customers WHERE CLI_KEY =: 1 FOR UPDATE NOWAIT
  [388] where the link param 1:263
  OracleSQLBuilderImpl.doEntitySelect [389] failed...
  [390] java.sql.SQLException: invalid column type
  at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:11256)
  at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:10605)
  at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:11665)
  at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:11631)
  at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObject(OraclePreparedStatementWrapper.java:253)
  at oracle.jbo.server.OracleSQLBuilderImpl.bindWhereAttrValue(OracleSQLBuilderImpl.java:2306)
  at oracle.jbo.server.BaseSQLBuilderImpl.bindWhereClause(BaseSQLBuilderImpl.java:2300)
  at oracle.jbo.server.EntityImpl.bindWhereClause(EntityImpl.java:10784)
  at oracle.jbo.server.BaseSQLBuilderImpl.bindWhereClause(BaseSQLBuilderImpl.java:2283)
  at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:840)
  at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:552)
  at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:8311)
  at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:5971)
  at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:6491)
  at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6707)
  at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3264)
  at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3067)
  at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2071)
  at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2352)
  at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1590)
  at oracle.adf.model.binding.DCDataControl.callCommitTransaction(DCDataControl.java:1415)
  at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1428)
  at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2169)
  at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:731)
  at oracle.jbo.uicli.jui.JUActionBinding.actionPerformed(JUActionBinding.java:193)
  at oracle.jbo.uicli.controls.JUNavigationBar.doAction(JUNavigationBar.java:412)
  at oracle.jbo.jbotester.NavigationBar.doAction(NavigationBar.java:112)
  to oracle.jbo.uicli.controls.JUNavigationBar$ NavButton.actionPerformed (JUNavigationBar.java:118)
  at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
  in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2318)
  at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
  at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
  at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
  at java.awt.Component.processMouseEvent(Component.java:6289)
  at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
  at java.awt.Component.processEvent(Component.java:6054)
  at java.awt.Container.processEvent(Container.java:2041)
  at java.awt.Component.dispatchEventImpl(Component.java:4652)
  at java.awt.Container.dispatchEventImpl(Container.java:2099)
  at java.awt.Component.dispatchEvent(Component.java:4482)
  at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
  at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
  at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
  at java.awt.Container.dispatchEventImpl(Container.java:2085)
  at java.awt.Window.dispatchEventImpl(Window.java:2478)
  at java.awt.Component.dispatchEvent(Component.java:4482)
  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
  to java.awt.EventQueue.access$ 000 (EventQueue.java:85)
  in java.awt.EventQueue$ 1.run(EventQueue.java:603)
  in java.awt.EventQueue$ 1.run(EventQueue.java:601)
  at java.security.AccessController.doPrivileged (Native Method)
  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:98)
  in java.awt.EventQueue$ 2.run(EventQueue.java:617)
  in java.awt.EventQueue$ 2.run(EventQueue.java:615)
  at java.security.AccessController.doPrivileged (Native Method)
  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
  at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

  Check the OS type for each attribute. Number should be oracle.jbo.domain.Number.
  VARCHAR must be java.lang.String. Date should be oracle.jbo.domain.Date