IMAQ WindDraw does not work with multiple screens

I am developing an application using drivers IMAQ which displays fullscreen image on a primary or secondary monitor.  It works very well in mode full screen on the main window, but when I put the window on the secondary window, is not up-to-date.  As an additional test, when I put half of the window on the screen 1 and the other half on the other, the part that is on the main display updates is not the case of the part that is on the secondary display.

How to make it work with the secondary monitor?

(I've included an example VI to demonstrate the problem).

Thank you

Bruce

I don't know how it happened, but when I completely closed LabVIEW and rebooted, then just run the VI it works now!

It has been a strange behavior, if I see it again once I'll let you know.

Thank you
Bruce

Tags: NI Software

Similar Questions

  • Portege M200 - pen does not work with the screen

    So I bought a pen for M200 and reinstalled the operating system.
    Now I M200 with Windows XP Tablet PC edition, a utility Screen Rotation and usefulness of the stylus button. Now Pen buttons work fine with my new pen, but the screen itself does not work. I mean, the stylus does not work with the screen.

    I have a mouse, and another menu pointing devices in Device Manager and it includes the following submenus:

    HID compatible mouse (I use the random DELL mouse)
    Mouse PS/2 Cimpatible (?)
    --------

    I think there must be something else...
    Please tell me, forum, what drivers should I download to get the pen to work?

    Stand by. Are you using the original image of recovery Toshiba (operating system) or you have installed your version?

  • my photo does not work with the screen saver

    Photos has never worked on Apple TV 4 until today with the 032116 update, but my pictures does not work with the screen saver.

    I dare you to try to tell me how to make it work. Please have a solution, someone.

    Given that Apple isn't really care or help on these forums, it would be great if someone mentioned the steps.

    Thank you

    Can you elaborate on the question?

    These are user forums and this is why you will not see the participation of Apple here

  • Smartphones blackBerry to go XLS documents does not work with multiple sheets

    After that I upgraded the storm, Documents to Go will not edit XLS files with multiple documents.  I have improved the DTG and still currently editing a spreadsheet with multiple on-page errors.

    "this file is read only the following unsupported of content:

    Names of:

    AVT. Every day. _. Travel._.log._.1

    etc for each cell that bears on the other page.

    Before the update has worked well.

    Thank you. I did yesterday as well. I got this morning from a worksheet that everything was working ok.  Must be an error in the sheets that I opened.  I can't find the errors, but leaves, everything seems to work rewriting.

    Starting at ground zero is perhaps the best option sometimes.

  • Portege M200: Rotation utility does not work with the new driver

    Hello

    I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

    When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

    Anyone any ideas?

    Hello

    You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

  • IMAQ histogram does not work

    Hello

    In the following example the Histogram IMAQ block does not work: all statistics are 0.

    Where I've been misled?

    Thanks in advance.

    Solved.

    The problem was that the histogram IMAQ does not work with RGB (I used the PC web camera).

    Workarounf: insert the customization function (which changes the RGB 32-bit to 16-bit grayscale) between the image histogram and KING.

  • My Vista 32 does not work with Abby Fine Reader 5.0 Sprint

    My Vista 32 does not work with Abby Fine Reader 5.0 Sprint. I have Adobe Reader 9.5. Can I both... Can I uninstall Abby?

    Hello

    I would like to inform you that Abbyy Fine Reader Sprint 5.0 is an optical character recognition program. It takes a scanned image and converts it to editable text, such as Microsoft Word or Excel.

    You can view the following link to learn more on this subject:

    ABBYY FineReader Sprint
    http://www.ABBYY.com/finereader_sprint/

    You can go through the link and uninstall Abbyy FineReader Sprint 5.0 as Adobe offers the same functionality.

    See the following steps to uninstall it:

    a. click the Start button and select Panel.

    b. select programs and features in the menu.

    c. in the programs and features window, search for Abbyy FineReader Sprint 5.0 in the list of programs.

    d. select the option Uninstall. (If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)

    e. follow the on-screen instructions to complete the uninstall and then restart the computer if prompted.

    Hope this information is useful.

  • microphone does not work with voice-dictation

    Original title:

    MIC problems

    My microphone does not work with voice-dictation in Win Vista. However, it does not work with Sound Recorder?  I went to the Hardwear and Sound but MIC is not yet in speaker properties so I can't make adjustments. Any ideas?

    Hello

    Thank you for joining Microsoft Community!

    The microphone does not work with voice-dictation.

    Quick questions:

    1. What is the brand and model of the computer?
    2 - is a built-in microphone?

    We will follow these steps and check:

    Method 1:

    Select Microphone, a default device.

    Follow these steps to do the same thing:

    (a) right click on the "speaker" icon located on the bottom right corner the screen of the taskbar.

    (b) click on sounds, click on the recording tab.

    (c) click Microphone, and then click Properties. (Note to make sure that this work appears under Microphone. If the job does not appear, click on Microphoneand then click set as default.)

     

    Method 2:

    Check if dictation is enabled or not.

    See the following links for the same:

    Turn on dictation for all programs

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-on-dictation-for-all-programs

    Troubleshoot speech recognition

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

    I hope that helps!

    If the problem persists, or you need help on Windows please keep us informed.

    We will be happy to help you!

  • 200 M from Toshiba does not work with 10W connected/Vista Home Basic 32-bit

    Dear Sir

    I m having a problem with my Toshiba M200 laptop, it shows no text display or clear blue/green screen or different models with the connected 10W. But it does not work with the battery. Afer complete the system startup and normal screen if I connect the power 10W then works perfctly ok. The same procedure should be followed evertime I use my laptop.

    Can someone guide me weather it is a hardware problem or software related problem?

    Dipak Chowdhury

    Hello

    Have you checked with a different AC adapter?

    This seems to be a hardware problem.  You will need to contact the manufacturer of your computer to be able to find a solution to this problem.

    http://forums.Toshiba.com/

  • U2412M does not work with DVI

    Previously worked perfectly with the following:

    Computer (Windows 7) supplied with monitor connected to monitor with original DVI cable

    Laptop Dell Inspiron 5547 (Windows 8.1) with a HDMI output connected to monitor via an HDMI to DVI I bought from Dell.

    Two computers worked with the VGA cable supplied with the monitor.  Now the VGA is intermittent.  I tested the cable with another computer and there is no problem.

    NOTE: I've never had the monitor connected to 2 computers, while they were on or while the monitor is turned on.

    Now, the monitor doesn't not with DVI - video display. The laptop cannot detect the monitor under control panel > display > screen resolution. It only detects the built-in monitor.  I can't check this on the desktop because there is no video display.

    I also bought a display port > HDMI adapter but read messages explaining the need for a converter, so I'll ignore for now it does not work with DP since I may have the wrong card.

    I followed the instructions to reset and diagnostics to the screen, which makes no difference. The problem is not at all, not only a bad display.

    Is still of Dell do not repair out of warranty monitors? I bought the monitor directly from Dell and I find it rather hard to believe that there is no way to repair $ 300 monitor that is only 3 years old.

    Any suggestions would be welcome. Or am I out of luck, and to buy a new monitor?

    You run properly bid. He says on page 31, 'you can run diagnostics integrated only when the video cable is unplugged and that the monitor is in self-test mode'

    So no DVI or VGA connected monitor.

  • WinHTTP.dll does not work with TLS 1.1 and TLS 1.2

    We cannot send https requests to our payment processors using windows 7 with winhttp.dll or msxml6.dll because it is not support TLS 1.1 and TLS 1.2

    on Windows 7 and windows 2008 R2 server I have the same version of winHTTP.dll 6.1.7601.17514;

    winHTTP.dll version 6.1.7601.17514 does not work with TLS1.1 and TLS 1.2

    WindowsServer 8.1 and windows 2012 I have winHTTP.dll version 6.2.9200.16451
    winHTTP.dll version 6.2.9200.16451 works well

    Here is a sample of my test code:
    Set obj = CreateObject ("WinHttp.WinHttpRequest.5.1")
    obj. Open "COMPUTER", "https://www.paymnt.com/".
    obj. SetTimeouts 30000, 60000, 60000, 60000
    obj. SetRequestHeader 'Content-Type', ' application/x-www-formulaires-urlencoded.
    obj. Option (6) = false ' disable redirects
    obj. Option (9) = 512' force TLS 1.1 - error
    "obj. Option (9) = 2048' force TLS 1.2 - error

    How can we improve the winhttp.dll version or msxml6.dll in windows 7 to work with TLS 1.1 and TLS 1.2?

    This is the e eprint screen with winHTTP.dll version 6.1.7601.17514

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • BlackBerry 10 why my search engine does not work with the book of Contacts?

    Yesterday, after the next upgrade, my search engine simply does not work with contacts.

    Update:
    OS version: 10.3.1.2576
    Software r: 10.3.1.1779

    When I opened my contacts, all of them are displayed, but as soon as I type a letter, the screen will just totally "empty", as I have very strange person indeed.

    Anyone?

    Thanks anyway for your help, but the final solution was to reload and upgrade the full operating system.

  • In Photoshop CS6 Hue Saturation does not work with forground/background jitter set to 100%, that no color change is found. Help

    In Photoshop CS6 Hue Saturation does not work with forground/background jitter set to 100%, that no color change is found. I've added a screen Shot the brush settings and a demonstration of what produced the brush.

    I also noticed that when I make a model of a single color, when I fill a selection with the pattern, I get a rainbow of different colors.

    I use a 64-bit version of Photoshop CS6 masters Collection

    I'm on a PC equipped with an Intel Core i7 1366 4 physical cores and 8 wires, 24 GB of DDR memory, A Crucial 512 GB SSD and a NVIDIA GTX 570 with 2 GB of memory.

    The size of the document is 2100 x 1500 pixels in only two layers of 300 PPIBrush Settings.png

    For the issuance of the brush, see apply a Tip in the dynamics of color and see if that makes a difference.

    more information

    Dynamic color in Photoshop CS6 "Julieanne Kost's Blog

    https://helpx.Adobe.com/Photoshop/using/adding-dynamic-elements-brushes.html

    With regard to the model, if your use Edit > model fill, make sure you have not verified Scripted Patterns

    (this parameter is also the Paint Bucket tool in photoshop cs6)

    more on scripted models

    https://tinytutorials.WordPress.com/2014/07/25/Photoshop-CS6-CC-scripted-patterns-fills/

  • FLASH PLAYER 10.3.183.7 DOES NOT WORK IN FULL SCREEN

    FAO: MR. CHRIS CAMPBELL

    Hello Chris

    You probably get this from all angles, but the most recent update for Flash Player (10.3.183.7) JUST DO NOT WORK CORRECTLY.

    I keep my browsers updated and as of today (5 September 2011) Flash WORKS in "small pane in the browser" mode (for example, in Youtube) BUT VA VIRGIN AS SOON AS LARGER.

    Note that overlay the legends and pause / graphic reading DO all the work - it's only video decompression that is not - leave black and white screen.

    It's FireFox 7.0 both last Google Chrome: I carefully uninstalled & replace Flash form the links you have posted here and IT STILL DOES NOT WORK in full screen.

    You must release really NO new version of automatic update code like this that are not properly tested: it has mucked up watching a video for millions of people unnecessarily.

    Because of the new accelerator support?   who knows.    It's a living environment, the Toshiba Satellite Pro (we do not have all go and buy new PC every 10 weeks like you developers do) and it has a P4 and the integrated graphics card Intel 82852 standard: perfectly fine until last week.     But it has 64 MB graphic and I see that 10.3.183.7 now 'requires' 128 MB?       You can not just make assumptions like that: I bet that there are 50 million more RAM VGA PC there with 64 MB (or less).

    Adobe is a great product, but it is a complete and total ball * ls - up like we in England is called: Please excuse my Anglo-Saxon franchise.    Sorting, please.

    Mike, London, exasperated

    Hi Mike,.

    You could run into problems of video acceleration here.  I apologize and we do not have an internal bug against it (bug #2950542), which will be fixed in the next version of Flash Player.  In the meantime, you can try turning off hardware acceleration to see if that makes a difference?

    How to disable or enable hardware acceleration?

    Thank you

    Chris

  • Flash Player 10.2 does not work with my Win 7

    I have problems with flash player and windows 7 (32 bit). Since the last update (version 10.2), simply stoped working here. I tried several types of approaches to correct, but so far nothing. I can not watch videos on internet, to always have a green screen and then crashing and is happening with opera, firefox, chrome... I tried to install an older version (10.1.85.3), but does not work as well, and what's weird, before the upgrade, it worked!

    I installed windows 7 again, but does not work with the new version again. I did a test: use the 9.0.283.0 version, almost everything works, except a few Web sites that require the latest version (NHL Centre ice, for example). I don't know what's going on and don't have any ideas how to fix, so if someone could help, I would be grateful.

    'Green screen' often indicates problems with hardware acceleration; have you tried to disable it (Flash Player settings)?

Maybe you are looking for