IMAQ write JPEG file error
Hello
I am trying to save the image captured by a camera (.tiff) to the JPEG file, but it came with an error. Can someone tell me how to solve this problem?
The VI of the sample and the TIFF image file are attached. Thank you very much.
Jane
VI "IMAQ decide" is not used immediately after you create the image with the "IMAQ Create" VI and closes a session will deal with you later, you must also change the location in which to save the image, because at the location "C:------' and ' C:------temp------" often generates problems with permissions of the operating system.
Kind regards.
Tags: NI Hardware
Similar Questions
-
IMAQ Vision: IO file error
Hello
I get the error in the subject, trying to open a file that was acquired from a phone android via the command "adb shell screencap. I have attached the criterion vi and the image. I can't seem to find the solution to open this file without error happening on "imaq readfile. I tried image different types on imaq create and also tried the other way to read that an image file named "imaq read info image and vision.
I see that I can use the 'imaq getimageinfo' tool to get the parameter image correctly. I can't get labview to open the image without error, given the tools available. Help, please.
P.S. I'm under labview 2013 sp1.
Thanks in advance,
David Jenkinson
Confirmation: Your product-1074395993 code error code when executing "IMAQ ReadFile" during the reading of this png. I don't know what could be the problem with this PNG. To work around the problem, you can use 'Read the PNG file' of the 'Graphics Formats VIs"which doesn't have this problem.
-
File access denied @ IMAQ write file 2
Hello
I started a project using the Vision Development Module and I'm stuck in the templates backup in a folder.
I have tried many other 'methods' using the same Imaq write file 2 and all have the same error...
Below is a basic example.
Maybe someone can provide a correct solutions or give me an idea on what might be wrong.
I'm losing my mind soon
PS: I gave full control access to all users...
Thanks in advance!
Hello
'build path' feature to add the name to the model. You can do this in several ways (as a constant, dynamically, etc...).
An example of the use of a constant is illustrated below:
Best regards
K
-
Problems with IMAQ write file.vi
Hello, I am new to the community, and I have some problems with a Labview program, I received from a colleague. The program is written in Labview 8.6 and control (Guppy 160 b & w) camera and one-step translation. The camera is supposed to take 2 pictures in grayscale when the scene is in a certain position. Bmp images are safed using IMAQ writeFile.vi. For the configuration of my colleagues, it worked, but I get the following error message:
"Error 1074396080 occurred to IMAQ Write queue.
Possible reasons:
IMAQ Vision: Invalid Image Type (Hex 0xBFF60450). »
and the files that are written are empty.
There is also no information using Labview extended regarding the IMAQ writeFile.vi. I found IMAQ 2.vi writeFile, but use it I get the same error as before. I don't know what to do. Can someone help me? Thank you in advance!
Lemarié
PS: You'll find an overview of the program (with the writeFile 2.vi IMAQ) in the attachment.
-
I am running Windows Vista Home Premium Service Pack1 and use Windows Photo Gallery to managemy photos. I like the fact that I can integrate tags and ratings in JPEG files.
I just noticed though, that the tag is no longer to be stored in the JPEG file. I know because when I saw the properties of the file tag information I have in the Windows Photo Gallery is not present. If I try to change the properties directly, I get an error message stating:
An unexpected error prevented the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem: 0x88982F50 error: No. Error Description available.
I checked the file isn't read-only etc.
I searched Microsoft.com for this error and have found no help. I searched the internet and have seen many forums to raise this issue, but I can't find a solution.
Note that when I try to fix an image in Windows (eye of harvest/red etc.) Photo Gallery, I also get an error that says I can't save the changes.
For me, it looks like a component is faulty or missing, but how is it resolved?
Hi RealPaulus,
Solution for error 0x88982F50:
1 open the Task Manager by right-clicking the taskbar
the bottom of your screen and choose the task manager of
the menu.2. click on the processes tab, along the upper part of the task
Manager screen.3. in the processes tab, select the corresponding button at the bottom left
of the screen that says "show processes from all users".
and click on it. Click on 'Continue' in the UAC prompt that
rises.4. the screen should turns off a moment, and then return with
many more listed processes. Click on the column "command."
Line"to sort the list and search for:"C:\Program Files\Windows Media Player\wmpnetwk.exe"
Read the description in the next section on:
Windows Media Sharing Service reader network
5. click on this process. Click the end «»
Treat button"at the bottom right of the screen.
Confirm 'End process' if necessary.6 perform the steps 1-5 before opening a Windows Explorer
window for the first time in the current session.Eliminate that a will of the Task Manager process
Restore Windows Explorer ability to 'see' as well as
'Add', 'remove' or 'edit' Tags or other properties to a file to
JPEG files.Samantha M S
-
Crash issue - error msg "premature end of JPEG file.
In my application, I generate HTTP request to download the tiles from the Board. Every thing is good, but sometimes it is crased with the error message.
Premature end of JPEG file
Can someone please tell me what is the significance of this message and what kind of mistake made by my code?
Thanks in advance.
Yes, you have reason for HTTP request is interrupted.
My HTTP request is in different thread (not in the main thread). And for my purpose I stop this thread.
Is - this problemetic? Is there a good way to do it?
Thank you
-
I have two hard drives in my computer. When I try to create or copy files to the root of my drive D:\, I get an error message (see image below). I have possession of the car, as well as all the permissions. In addition, there is no set of permissions of 'decline' (see image below). How to solve this problem?
Error message and permissions:
http://img51.imageshack.us/img51/3484/permissions.PNGHi tehshibz,
Please use the Microsoft Windows 7 forum.
Belongs to your computer from a domain?
This is by design and is a function of (UAC) user account control and the
ACL on the root of the drive. The ACL allows that the administrators and system
for writing files to the root of the drive. UAC means that even if you are a
Member of the group from the administrator, you are not running as an administrator, unless
raise you.If you really want, you can launch a process allows you to write the
files with as an administrator, then you can write. If you try to
Drag / move a file, you get a prompt for elevation. It is recommended that
solution is do not store data however.If you really want to store files in the root of the d: and you do not want
raise every time, you can resolve the situation by adding an access controllist entered for your account to the root of the drive, as follows:
1. click on the window button: all programs: Accessories
2. right click on command prompt
3. Select run as administrator and accept the prompt
(4. run this command: icacls d:\/Grant fooSadOI) (CI) (M)That grant foo user alter permissions on d:\. All objects (IO) and
containers (CI) will inherit these permissions. You replace foo
with the name of your user account.Once do you any application you run as user foo will be able to store
data at the root of the C: drive. You will also have losened default
security settings, with all the caveats that implies.Your user profile may be damaged and therefore you can remedy.
Follow the steps in the link for the Fix damaged user profile : http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
For more information, see: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/08ef075c-3cea-4397-9d7a-622eed7faa35
http://social.technet.Microsoft.com/forums/en/itprovistaannouncements/thread/b5e69635-038b-4A80-8786-70e1b1d8be0ahope this helps
Aziz Nadeem - Microsoft Support -
Error message in Photoshop CC 2014 trying to open JPEG files
After installing the updates of Photoshop CC 2014, one a few days ago I am not able to open JPEG files. Whenever I try to open a JPEG file, I get the following error. I tried to uninstall the program yesterday and put it back, but still having the same problem.
Here is the version of Photoshop that I use...
Because you have CC 2014 on a Mac, which tells me that your OSX is probably 10.8 or less.
The updated Camera Raw, 9.5 causes this error due to a conflict with older versions of Mac OS x, and you go back to 9.4
Setup for 9.4 is in this technote: error: 'File not found' when opening JPEG files
So just follow the instructions and you should be fine.
Gene
-
I can't save a picture of me as a photo account. It comes out there's an error in the recording of the jpeg file. It is in 'Downloads' and 'Documents' in the finder of my iMac 27 5 k. Can someone help me? Should I change extension or what? Thank you
What program Adobe do you use that you have problems with? I can put your question in the help forum.
-
Is IMAQ write file 2 part of license acquisition?
Hey!
We do an application used for presentation and image acquisition. I noticed that if we build this type of application (by using only VI of the acquisition of the vision) on our license labview 2009, no run-time license is necessary for our customers. I would like to know if I'm aloud to use IMAQ write File2? Is there a list of VI which I am aloud to use.
Thank you!
Hello
I would like to know if I'm aloud to use IMAQ write File2? Is there a list of VI which I am aloud to use.
IMAQ Write queue is free of licensing issues
Is there a list of VI which I am aloud to use.
The screws are installed with NOR-IMAQ and Acquisition of Vision Software?
Andrey.
-
Replace the existing files - error
I see this question came up a few times, but after reading the answers it seems that I still have a problem. can someone clarify if I make a mistake my workflow please?
- Take images to the XXX folder and expand them
- Export these images in a new folder YYY. Add to the catalogue not checked
- Syncronise YYY and bring new images. Apply a develop preset to these images to import
- Export images of YYY with preset applied to JPEG to YYY for external use. Select "replace without warning".
- Error comes up saying that it cannot be run because would replace exisitng photo
I understand others threads is that this eror should occur only if you try to replace an original, but it was designed for exactly my purpose when you're operation on the copies. I'm just owndering how LR is supposed to know that the imported copy is not genuine. What attribute would say that as the import by means of synchronization is the same process. If I used the "add to ngociant' in step 2. This leaves LR know it's a copy? If so I could add my preset manually?
I use LR 2.5 on Vista 32-bit
Thanks for any advice.
Mike
The bug which allowed the overwriting of files present in the catalogue has been resolved for a long time. LR has no idea of this "original" are, it just won't let you no more write files present in its catalogue and a good thing! Write the function is to write on exported images, I use it all the time and it works very well. So if I want a set of images for one purpose I export to a folder, if I need then in a different size or I just use the same folder and write the files previously exported. No need to import these files in LR as I have the "original" and can always make virtual copies if I need different versions in LR
-
Problems of non-sinusoidales waves «Write to file»
Hi people,
I have a problem with "writing of the waveforms to file". Is attached a very simple vi which gives the error message: "error 4 has occurred open the file...". LabVIEW: end of file encountered. NOR-488: invalid argument or arguments to the function call. »
It gives this message that I put in a new file or name of one that already exists.
The last part is rather confusing because I do nothing with GPIB.
I found this article in the knowledge base, but is not the same case, because it is the first time I address the file:
http://digital.NI.com/public.nsf/WebSearch/0576444C8FD4DC0F86256E83007FA540?OpenDocument
It's Windows 7, SP1 2013 LV.
Any advice would be much appreciated!
In the examples provided with LabVIEW, there is one that should be useful waveform - wave write to FIle.vi
-
The reference must be closed on a reading-file error or not?
Dear users,
When I read a file, a reference is created one should close, when no longer used, should I? Here is a minimal example to my next serious question: should I close the benchmark on reading-file error or not? Is there a created in the case of "the file does not exist"?
See you soon,.
No, when used in this way, the references created by the file read and write functions should not be closed - thought that he would have no negative effect if you did.
In addition, you do not want or need the structure case around a reference close the function.
Mike...
-
Use the system Exec IrfanView to open the JPEG file
I am trying to use the Exec System call Irfanview to open a Jpeg file, and the following error occurs:
"Error 2 occurred in the Exec.vi system. Order has been "iview32 c:\test3.jpg/Hide = 3 pos = (30,30)."
"LabVIEW: memory is full."
"NOR-488: no listener on the QPIP.
I then tried to add "cmd/c" in front of the command, but the windows open and close just flash BACK and then nothing happens.
I have no problem opening jpeg format in the DOS command window.
Can anyone help?
you don't need to specify the full path as long as you have the path in your path variable
I think that the problem may be that you are using the wrong program name, I think it's i_view32 not iview32
-
I want to use 'IMAQ read the file' and 'IMAQ write File2' to read, view and save an image, but I don't know how to use the file 'IMAQ Read' and 'IMAQ write File2', please give me some examples, thank you very much! (I use LabVIEW 8.5)
Maybe you are looking for
-
What is - this I can improve in a hp pavilion p6 2310
It's the pc link http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5295969&spf... Just a question about it because it's a good pc
-
HP ENVY 17-j010tx Notebook PC: replacement laptop battery
HP ENVY 17-j010tx Notebook PC (ENERGY STAR) I can't do a battery of alternatives in Australia Companies that say they can do, are asking an extra $ 250.00 in application fees. more 4 weeks for delivery!
-
I bought a genuine Windows XP SP3 CD (french version), installed and activated, it after finding that the windows came with my computer was a fake. A few months ago my computer crashed, and my father has taken recently to his colleague to repair. The
-
HP LJ M4555 - error 44.10.04?
Hi all When I configure SMTP on the server integrated Web of my M4555, I get the 'test alert' directly. The problem is when I try to use the scan-to-mail function, it fails. The error that I see on the page event log is the 44.10.04. I can't find wha
-
BlackBerry Z10 after upgrade 10.3.2 cannot access encrypted file of cale
My Z10 have been encrypted. I do a custom (Config and file only, not application). I did the update to version 10.3.2 leaking. I've restored my backup. The Z10 work very well, but to see that my file but I can't open. You have a solution to redisplay