IMessage, that an error has occurred during authentication

Similar Questions

• iMessage: "an error has occurred during authentication.

  iMessage on my Mac began acting yesterday and is not synchronized with my phone and then stopped working completely.  I disconnected and tried to reconnect, but got this error message:

  Can not connect to iMessage.

  An error occurred during activation. Try again.

  I disconnected iCloud on my Mac, reconnected and tried to open a session in iMessage, but got the same error.  I tried my wife apple ID and password and got the same error message.

  Does anyone have an ideas?

  This could be a difficult problem to solve, as there are several possible causes for this. Please test after taking each of the steps that you have not already tried it. Back up all data before making any changes.

  Before proceeding, test on another network, if possible. This could be a Wi - Fi access point public, if your computer is portable, or a cellular network, if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or your ISP, not in your computer.

  Step 1

  Check the status of the service. If the service is stopped, wait until he comes back upward. There may be a power outage, localized, even if the indicator is green.

  Step 2

  In the menu bar, select

   ▹ System Preferences... ▹ Date & time zone ▹

  The nearest town from there where you are should be selected on the map.

  Step 3

  Disconnect you iMessage and FaceTime on all your Apple devices. Sign out and then sign back in. Try to connect again.

  Step 4

  Restart your router and your device at wide band, if they are separated. You may skip this step if you don't control these devices.

  Step 5

  Follow these instructions to view the serial number of the machine. If the number is missing or invalid according to the web form, take the machine to an Apple Store or another service center authorized to correct the problem.

  Step 6

  The measures suggested in this support article. If you do not understand some of the steps or leads them not, ask for advice. Note in particular that the email address associated to your identifier Apple should be checked. If the address is in the field obsolete mac.com, you will have to change.

  Step 7

  In the menu bar, select

   ▹ System Preferences... ▹ Network

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the Proxies tab. If the SOCKS Proxy box is checked, uncheck it. You don't need to change other parameters in the window. Click OK, and then apply. Test.

  The result may be that you can not connect to Internet at all. Cancel the change, if any, or if iMessage still does not work. Remember that you must apply changes made in the preferences window to take effect.

  Step 8

  Select in the menu bar

   ▹ System Preferences... ▹ Flash Player ▹ storage

  and click on

  Block all sites to store information on this computer

  Close the preferences window.

  Step 9

  Make sure that you know the ID and the password you use with iMessage. Launch the Keychain Access application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Use the search box in the toolbar of the Keychain Access window to find and remove all items containing "iMessage" or "com.apple.idms" in the name. Sign out and then sign back in.

  Step 10

  Select connections comments * and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you won't have access to your personal files or settings. Applications will behave as if you use them for the first time. Don't worry about that; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create an account to test and delete it, including his home folder, after testing.

  If iMessage worked in the guest account, stop here and post your results.

  Step 11

  Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is set, or if the boot volume is a Fusion drive or a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including his outputand Wi - Fi on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.

  If iMessage worked in safe mode, but still does not work when you restart in 'normal' mode, stop here and post your results.

  Step 12

  Triple-click anywhere in the line below on this page to select this option:

  /Library/Preferences/com.apple.apsd.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  Step 13

  Reset the NVRAM.

  Step 14

  Reset the controller (SMC) system management.

  Step 15

  Reinstalling OS X.

  Step 16

  If none of the above steps resolve the issue, make an appointment 'Genius' on an Apple Retail Store or contact Apple's Support. When you configure a support call, select "Apple ID" as the product that you need help, not model material. In this way, if you're not under AppleCare, you can talk your way out of being charged for the call.

• Fix for FaceTime and iMessages on El Capitan "an error has occurred during authentication"

  There will be a fix for this error? It's very frustrating, I'm hoping he gets patched as soon as POSSIBLE. I tried everything suggested on the forums of Apple and you have found no solution. It used to work fine until I updated the software on my Macbook.

  You must post a detailed description of what you're trying to do and and what's happening, or nobody can help you solve your problem.  There are millions of users of iMessages on El Capitan, which do not face any questions at all, so the problem is almost certainly on your end.

• I earsed my hd and now im trying to reinstall, but an error has occurred during installation, which means that I can't reinstall osx again. PLS HELP!

  I earsed my hd and now im trying to reinstall, but an error has occurred during installation, which means that I can't reinstall osx again. PLS HELP!

  Please tell us how wipe you the drive and how you tried to reinstall OS X. And what was the error, and how he help you trying to reinstall OSX again? You can look at writing an effective communities of Apple support question before you answer because we are not spirit or psychic readers.

• update of NVIDIA geforce 6150se nforce 430 says unknown error has occurred during installation

  After the last update for my integrated video card no longer works the vista update will not be installed. He repeated to me that an unknown error has occurred during installation and download failed.

  Hi Jamied,

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Also I suggest you to visit the link below and select "Auto-detect your GPU" and install the drivers manually and check.
  http://www.GeForce.com/drivers

  Hope the above information helps. If the problem is not solved please get back to us and we will be happy to help you

• ID package already in use, an error has occurred during the recording of output ' 1.1.0"to the database.

  Hello

  I currently have an application called "Apa Doanya' (id 33020976) for BB 7 and below. Now, I created another version of it for BB10. To publish this version BB10, I created a new application named also "Apa Doanya' (id 46317888), download the file bar, but not yet to introduce the new application for review. Later, I changed my mind, I want to release this BB10 version under the name of my current application so that I can keep the sides and the current download figures. So in my application, I added a new version, download the folder bar and increment the version 1.1.0. But I got an error when recording on step 5, he said:

  Package already in use ID
  An error has occurred during the recording of output ' 1.1.0"to the database.

  I tried several times but no luck. What has caused this? Is - it because I already download the bar file to another application (id 46317888)? Just to be sure, I remove bar app 46317888 file and download a dummy cod file (so that the application can be saved). Then repeat the previous step (add a new version and so on) but I still have the same error.

  Really appreciate any help.

  -Hammemi - D

  Hi erik,
  Thanks for reminding me

  Yes, the problem is now RESOLVED. It was, I think, a bug/error on their part (support of the seller) so they erased the package id (I quote: "the package ID has been deleted.").

  Thank you very much :-)

• An unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  I recently bought a drone DJI Phantom 3 kind have been treatment of videos more than usual and not have not had any problems. I use Lightroom for cataloging movies and I use the first to change.

  Since yesterday, I was not able to import any movie that I get the following error

  an unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  

  Initially, I thought that it was due to a spectacular crash of drone (Physics isn't SHE!) who corrupted the file that was being logged, m ais I can now no longer import any movie to Lightroom.

  
  I tried the following

  1. a different memory with a new registration card

  2 removing and re - import an old movie

  3. to remove and re-import and old movie created by another camera

  4. to remove Lightroom and rolling back to the previous version of LR CC (CC 2015 [1014445])-had the advantage of getting rid of the annoying new import dialog screen. -

  5. upgrade to El Capitan to see if maybe OSX update may help.

  
  

  None of them had no effect, can anyone help?
  

  
  

  
  

  
  

  
  

  
  

  Hello

  You're welcome ShawWellPete, I thank you for everything.

  Yes, this person is the windows user, but it was the same question that could have been resolved by quicktime 7. (pending confirmation)

  Try to disable the start-up services and restart the mac and then try: take control of start-up and connection elements. Macworld

  There could be some service startup that is in conflict.

  Concerning

  Jitendra

• Move to the new computer, get "an error has occurred during playback of files or write files to a disk." The disc

  • I tried to move my catalog and PE6 install to a new computer.  This is on a Dell Windows XP machine, and I moved it to a Toshiba Windows 7 (64-bit) machine.  I always kept my photo on an external hard drive files.  My library is 50 GB, 10,000 files.  Here's what I did.
    • Copied the original PE6 installation file on the Toshiba.  Installed but not activate it.
    • Copied my catalog folder to the location of the Windows 7.
    • Plug the external drive into the Toshiba.  So makes that same letter drive as a front.
    • Fired up to PE6 on Toshiba.  Seemed fine in the Organizer.  Everything seemed to be there, but I didn't try to make any changes at this time there.
    • PE6 disabled on the Dell.  Enabled on the Toshiba.
  • Then I realized that it is not fair.  I can edit the keywords and the stars rating on photos, but not the dates, legends or notes.  I get "an error has occurred during playback of files or write files to a disk." The drive is may be full, or there may be problems with the source media. »
  • Only a fraction of the external drive is in use.
  • I can access the files on the external hard drive with another application (Windows Photo Viewer).
  • I tried the reconnect All missing files.  Somewhat ambiguous, she said "There are no files to reconnect."
  • In the properties in the organizer for each photo are the appropriate file names and paths.  Folder view works fine in the Organizer.
  • I can put new files in the directories of the same external drive, import them into PE6, then change them normally.

  What is the best way to get Organizer connected correctly to my files?  I guess I could import all photos on the new machine, but I guess I'd lose some of my metadata.  So it's out of the question.

  Thank you

  Bill

  Well, the recommended method for moving the catalog is to use organizer of the PSE6 on your old computer to do a full backup on your DHM.  (Which backs up the catalog and media files).  Then, on your new computer, open the Organizer PSE6 and restore from this backup.

  Your method seems logical, but...

  Ken

• Whenever I try to watch a movie on Netflix it says that an error has occurred.

  I recently got a MacBook Pro and I'm watching Netflix. Whenever I try to watch a movie, it says that an error has occurred. I contacted Netflix and they said it was a problem with brightness of light. How can I fid which. I also have trouble downloading oovoo.

  original title: slight help Sliver

  Hello

  Check with SilverLight Experts in Installation and configuration of the MSDN Forums - SilverLight.net - forums

  MSDN - SilverLight.net Forums
  http://forums.Silverlight.NET/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I try to open control panel internet explore it closes and says that an error has occurred

  When I try to open control panel internet explore it closes and says that an error has occurred

  * original title - wht is internet explore doesn't let me access my programs on the start menu__ *.

  The error report window Windows provide additional data (such as the name of the file - module dll involved)? More details would be useful. Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• Activating Windows indicates that an error has occurred

  Last night I had an open window that told me there was an error activating windows and that my version of windows was not valid. When I try and open the Windows Activation it tells me an error has occurred. Code: 0 x 80070424.

  I use the windows which was preinstalled on the computer. BUT, I ended up having to purchase backup discs from Toshiba and the service center he relocated to me. Not sure if there is a problem or if it is internal.

  Help, please.

  Thank you

  Will be.

  Hi Will,

  And what you say now? If I understand the computer is now reinstalled with Toshiba recovery disc, so all is ok now or you always have problems?

  The version preinstalled Windows from Toshiba is still active and read to use so that I can t imagine you must activate your copy of Windows if it was preinstalled on Toshiba drive or recovery

• I have windows xp. The fix for microsoft data center could not scan my computer because it says that an error has occurred

  I just installed the fix for microsoft data center and I couldn't run a check on the various problems because they said and the error has occurred.

  Hi Carroll,

  If the problem is just related to the execution of the Microsoft Fixit tool, I suggest that you post your question on the Forums of Microsoft Fixit.

  Microsoft Fix it Center Forums

• Upgrade Express on 7, that an error has occurred in the script on this page. Line 0. Char from 0. Script error. code 0. "with a URL

  Hello

  After looking on any 3rd party retailers appear Anytime Upgrade key for 7 to professional.

  When I try Anytime Upgrade system that is integrated and use 'go online to choose Windows7 edition which is best', an error box comes in reading "an error has occurred in the script on this page. Line 0. Char from 0. Script error. code 0. "with a URL.

  When I try the store I find nothing either. Can I deduce that Microsoft no longer sell upgrades between versions of windows 7?

  Whenever upgrades have long past gone

  Finally unless you are interested in win-10 which is.

  Many win-7 pro autour on Newegg and Amazon, but they are not at level only oem / system integrator.

  You could buy one and a new ssd / HDD to install on and use the original win-7 to move to 10 - win

  Then passed to win-10 pro for 99.us.

• Getting the error "System 5 error has occurred" during the startup of service SQL in Windows 7.

  I'm restarting SQL server, what I used to do via the following command line:

  net stop mssqlserver
  net start mssqlserver

  However, I am on a new Windows 7 machine and I get the following error when I try:

  net start mssqlserver
  System 5 error has occurred.

  Access is denied.

  My account is a member of the administrator group, and I can restart normally through the Services Control Panel.  I have tried to turn the UAC settings all the way down, but still this message.

  (This also fails if I try to use PowerShell.)

  What should I do to be able to restart the services via the command line?

  Thank you
  -Peter

  I had exactly the same problem:

  1. new installation of windows 7
  2. net start MSSQLSERVER fails with "Access denied" from the command window, but works at the start of Service Control Manager
  3. connected as a user of Directors of the Group - same account used for the automatic start
  4. I tried the above steps to register. They do not work.
  5. I tried to settle my UAC account at the lowest possible level, as recommended in another forum. It also did not work.
  I was amazed by the number of desperate people with similar problems - and apparently some resolutions there. I've used Windows 3.1, Windows NT, Windows Server 2003 and Windows XP a few years back and then switch to Mac OS X and Linux. Now, I'm hard to get used to this kind of problem again, (sigh) Windows.
  In any case, one of my colleagues just came and gave me an easy solution. He said that the problem is that your user 'administrator' is not ' administrator enough "-go figure. In fact, being in the Administrators group is not the same as being THE administrator account.
  1. create a shortcut to 'cmd.exe' on your desktop.
  2. click right on the shortcut and select "run as Administrator".
  3. in the command window that opens, "net start MSSQLSERVER" works
  Good. So now I can go on this restart-SQL-Server-when-it-decides-to-die script for our customer site. Another sad story of Microsoft...

• Impossible to uninstall Clickpotatolite, get the message error «an error has occurred during unintall ClickPotato»

  I'm trying to uninstall Clickpotatolite program from the Windows Control Panel.  I continue to receive messages from programs and features, saying "an error has occurred trying to unintall ClickPotato.  It may have already been uninstalled.  You want to remove click potato in the list of features and programs. »
  Can someone tell me what to do?

  Hello

  ClickPotato description

  ClickPotato (or click on the potato) is an annoying advertising program aimed at film buffs. Click on the spreads of potato via corrupt ads offering the latest movies online. ClickPotato uses fraudulent websites as a platform to urge the sale of pirated via a video codec download movies. The video codec is actually malware ClickPotato which produces unwanted ads. ClickPotato may also install a screen saver and change your home page. Use up-to-date antispyware software to remove ClickPotato from your system before it starts causing havoc.
   

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.