iMovie 10.1.2 today (June 4, 2016), all of a sudden will not let me create a new project/film.  1. I have used the program extensively in recent weeks, many small travel films. 2. once in the projects, if create a new movie and the sign is checked, the op

Similar Questions

• Media Player all of a sudden will not play the dvd. Error message: Windows Media Player cannot connect to the server

  Original title: Media Player all of a sudden will not play the dvd.

  Suddenly, I can't play DVDs on my laptop. The error message is: Windows Media Player cannot connect to the server. The name of the server are may not be not correct, ther server name maybe isn't available, or your proxy settings are may not be not correct. Any suggestions on troubleshooting of Microsofts page appear to be relevant.

  Hi mcraigQY

   

  1. when exactly you get the error message?

  2. you try to listen to music from any remote location or try to play a DVD?

  3 have you tried to play a different CD or DVD?
  4. what happens when you play the same DVD on another computer?

  5. for how long have you been faced with this problem?

  6. the DVD folder that you are trying to play supported by the windows media player is it?
  7. What is the type of DVD that you try to play?

  Let us know the answers to help you best.

• Flash video C2 will not let me publish one image project

  I do a single slide captivate project with no bar to reading, and I added a flash video of her with it of own control. I was able to publish it, but I wanted to set some parameters, so I tried it republish after tweaking, and it gets stuck right on the part "generate slides.
  I tried to create a new project and copy of the slide, but it has the same problem. I've recreated the project from scratch with a different name and it will not yet release. If I publish a project without a flash video, it works fine.
  Side computer things, I rebooted, deleted the project output files and deleted my file of user for Captivate settings. I'm stuck at this point, any suggestions?

  OK, I found a solution. I fade out at the end of the project not controlled and checking that it fixed the issue. If I remove the verification it breaks again. This is regardless of whether or not I have the loop project.

• Thunderbird eliminated most of the records online and will not let me create new ones to replace them and read email stored in them.

  In order to remove online a large number of files in a folder (a folder IMAP?), I deleted the folder and then created a new folder with the same name. The next time I open Thunderbird, all my online except sent and trash folders disappeared, and I could not re - create files that have been deleted. I can't access the files stored in these folders or move files in folders bearing the names of deleted files. I can create files with names not used before. But I can't create a new folder of Junk to hold files that Thunderbird regularly sends to junk. I do not receive e-mail in the process. Local folders are not affected hereby. What can I do? I have Thunderbird 24.5.0. Thanks for any help.

  Go to file / subscription and see if you just without subscription to records.

  Check folders and make sure EVERYTHING is checked.

  Learn how to use several methods of selection and do not delete the records that you want to keep.

  control + a = select all

  Click heading 1, move upwards or downwards several items and maintain the SHIFT key while clicking the point 2 = selects items 1 and 2, and between the two

  Hold down the CTRL key while clicking random objects = selects any element clicked on

  Hold down the CTRL key while clicking on a selected item = deselect this item

• The trial version will not let me create a PDF file

  I am trying to create a file of cover of book in PDF format. I created the file in Photoshop, but the 'Save AS PDF' function does not create the type of PDF that I need for the publication of a book through IngramSpark. So I downloaded the trial version of Acrobat Pro DC. It will not open a file I have Photoshop Save as PDF. When I save as a Jpeg, it takes me to the subscription, purchase of the page online. Only, I downloaded the demo yesterday, so I should rest 29 days. Help, please. Thank you!

  1 ok, that makes sense. Yes, you can use the preflight in Acrobat Pro to make this conversion.

  2. the sounds as if something went wrong to make the PDF if Acrobat is not yet open. For example, this can happen if you click on save to JPEG, but type .pdf on the name. Am not saying that it happened, but it's an example. Can describe you step by step how you save the PDF of Photoshop, including the choice of that you pull down. Still, sounds as if you may have fixed this.

  3. the two apps: Acrobat Reader - and - Acrobat Pro. It is a potential mine field. Make sure that you recognize that you are running.

• After I download and install a form of internet gambling it will not let me play. There is an error message that says the name of games stopped working and his tent to find a solution and you informed when the solution is found.

  After I download and install games since the game first, big fish games and try to read a message box if poster indicating the name of the game has stopped working and that his search for a solution and you inform that a solution is found.  Here are the games I bought on these sites.  Games I buy in stores and install work. Am I missing a driver or something?

  Hi Knbrown,

  Welcome to Microsoft Vista answers Forum!

  Most of the online games use Java and Flash Player. If Java or Flash Player is not updated, you can get this error message.

  I suggest that you install the latest version of Java and Flash Player and make sure if you are able to play, you can see the link to download the latest version and install it by selecting the appropriate operating system:

  http://get.Adobe.com/flashplayer/

  http://www.Java.com/en/download/index.jsp

  If the problem persists, I suggest that you check with the manufacturer of games for assistance, you can check the link: http://bigfishgames.custhelp.com/app/home

  Let me know if it worked.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Mobile Device Center works very well, but then all of a sudden will not get connected mobile, it remains disconnected even if the PC sounds when the phone is attached to the USB.

  Windows Mobile Device Center installed. If I reboot computer everything works fine and he

  might work for 1 hour or 1 day, I can connect and disconnect the phone and it appears every time,.

  but then sudeenly it stops working.

  When I attach the USB of the computer phone rings (because it connects), but then nothing happens

  in Windows Mobile Device Center, the phone remains disconnected in Windows Mobile Device

  Center. It's really enoying!

  Any suggestions on how to debug/fix?

  Work around: someone knows how to restart the Windows Mobile Device Center without rebooting

  computer?

  I already tried to reinstall Windows Mobile Device Center, did not help. Both CD

  comes with the phone and software downloaded from Microsoft.

  I'm really stuck!

  Help, please!

  / Marcus

  It's a Samsung Omnia II GT-I8000

• Does anyone know the phone for Customer Service? Im trying to install an app and will not let me

  Does anyone know the phone for Customer Service? Im trying to install an app and will not let me

  There is no support for this phone.

  you could get help if you could explain or you can try to contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• I've upgraded to 2015 CC Photoshop today.  However, the quick selection tools and brush do not appear in a circular/round shape.  I tried to use the support key to enlarge to see if that brings the circle/round view form, but does not work.  All the I

  I've upgraded to 2015 CC Photoshop today.  However, the quick selection tools and brush do not appear in a circular/round shape.  I tried to use the support key to enlarge to see if it carries the form circle/round in sight, but it does not work.  All I get is a focus.  Can anyone help with this please.  Thank you.

  Remove the caps lock

• "The product key you entered will not work with this edition of windows vista. You must run the windows vista Setup program or enter a windows vista product key. »

  I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.»  You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""

  Hello

  You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.

  This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.

  You press F11 on startup to start the process of recovering back to factory settings.

  Here is the information about HP.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.

  If HP's Vista recovery disks, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• My trusty 2410xi has a mechanical jam and will not let me do all the work

  recently, when I turn on my trusty 2410xi all-in-One, it of a mechanical blocker and will not let me perform all tasks. I tried to disconnect the supply of the data lines, nothing helps. Looks like the print head may be stuck? I remember having the same problem a long time ago but don't remember what could be the solution to the problem.

  There are a few things that you, and not when this happens. Most of the time it's a very small piece of paper holding things to the top, or the printer just need a reset to zero more deep. The document following the link will take you through all the things you can try. If this does not work, you will need to replace the printer. Let me know what happens.

  http://goo.GL/BnGuX

• PES 9 suddenly will not open files of pse - due to the "program error".

  The program was working fine yesterday and now all of a sudden does not open PES files created yesterday or today. The error message says "Cannot complete the action due to program error". I'll need to deactivate and reinstall - and if so, how do I do that? Do I lose all brushes loaded into presets, all of the files currently not able to open if I do this?

  Resettlement is unlikely to solve this problem. Start by removing the preferences: quit the editor, and then restart it all holding the key ctrl + shift + option (command-shift-option on the mac). Keep the key down until you see a window asking if you want to delete the settings file. You do.

• I try to access an application on the website of the Government GOING and that is to say the connection is not approved and will not let me continue, how can I do?

  I had this problem before on sites Web of VA. How Firefox can not trust a site from the U.S. Government? It indicates that the connection is not approved and will not let me continue. How can I make Firefox let me continue?

  This page opens another page in a frame.
  In such a case, you cannot make an exception.

  • https://vabenefits.VBA.Va.gov/vonapp/default.asp

  This server does not send a certificate chain that ends with a built-in root certificate.

  • http://www.Networking4all.com/en/support/tools/site+check/report/?FQDN=vabenefits.VBA.Va.gov & Protocol = https

  You can open this page in a tab to make it possible to create an exception if you really need access to the site.
  Note that storing a permanent exception should not be.

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • inspect the certificate via the "view..." button. »

• Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not what should be checked in t

  Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not, what needs to be checked in the menu options for mode 2 window window... I use Version 23.0.1

  Hi gordie, you could use an addon to restore this configuration of the user interface: https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/