iMovie crashes after update of the Sierra

Similar Questions

• The closed display mode is no longer works after update of the Sierra on my MBPro. Known bug?

  I use a vertical dock for awhile, so my MBPro retina works in closed with external display, KB and mouse display mode.

  But since I installed the update of the Sierra, the external display not Mac OS desktop.

  It only works when I open the built-in screen...

  The bug is known? Or y at - it a setting to adjust on the Sierra?

  Thank you in advance

  Hi darklemon,

  I understand that, since the update to Mac OS Sierra, you've been unable to use your MacBook Pro in closed view. I know it's important to use your computer in a way that suits you, then I'm happy to help you.

  Let's start by resetting your memory NVRAM and SMC which can often help with system display and related issues:

  How to reset the NVRAM on your Mac - Apple Support
  Reset the management system (SCM) controller on your Mac - Apple Support

  Once you have done this, follow the steps here to set up the closed display mode:

  Use your Mac laptop to view closed with an external display - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• cursor jump after update of the Sierra

  After update of last week to Sierra of MacOS, I noticed many times randomly my cursor will jump erratically. I noticed several times why in an application like Photoshop Adobe or Illustrator but today it happened so that in Safari. Its very rare that gives me trouble with troubleshooting myself. Maybe one, two times a day.

  Before Sierra, I have not noticed any issues with the trackpad when his flat on a desk. In the past maybe noticed a little problem here and there if on my lap or on an angle, but this small current problem seems to have started with Sierra.

  Clean your trackpad

  Cleaning of your Apple - Apple Support products

  and that you use a wacom tablet? If in order to verify that the drivers are compatible with your operating system.

• Time Machine does not work after update of the Sierra

  The time function machine my Mackbook Air 2011 stopped working... it has not been saved since update for Sierra, it only take screenshots every hour, it will perform a backup is no longer on my external HD as before.

  There is no problem with the way it is implemented or the hard drive, it's me that my iMac is working perfectly since the update for Sierra and it's backup via the time machine on the same hard disk.

  It is a hard drive and put in place I was in use for about 5 years with no problems.

  Also since the update for Sierra I noticed that my MacBook Air gets hot and the fans go wild, although there was nothing or performance other than the system is auto.

  I lost the use of my built in camera after the update to El Capitan, and now I've lost the use of time machine... I was wondering if I should go back to Yosemite that everything worked well then!... is this possible?

  Thanks for any help with this!

  Update:-just so you know, time machine is to find the back up ok drive (external hard drive), it then goes to "preparing backup" and that's all, he remains in this preparation save the scene for centuries, after a while it just stops and it is saved all... nothing!

  Also noticed when I checked in Time Machine full backup I have before update for Sierra disappeared, he disappeared, been deleted... I don't know what is happening with it!

  Overall since the update for Sierra my MacBook Air did not work properly, in addition to all that Safari does not load, just to get the wheel spinning, and now (with the demise of my old back ups) it seems I can't go back to a previous state.

  My Mackbook Air took it!... the last update took the camera and really Sierra in... material not compatible with all new software, none of the new features work on my iMac or MacBook Air (only Siri), so a useless upgrade for me really, wish I didn't!

• Some problems of AppStore after update of the Sierra

  Hi, after update my Mac to Sierra, there are a few problems of the AppStore:

  1. The Pages app updated to v6 and numbers to v4, Keynote, but fails to Update v5 (iWork ' 09)
  2. I've been on the program of public beta for Sierra but have now updated to the release version, but the app store is still trying to download the last Beta of Sierra. I disconnected (e) into the beta program website
  3. The AppStore download iPhoto but the app shows the icon of the incompatible (white circle with bar diagonally) in the Application folder - how to uninstall it?
  4. Is does not work available on the AppStore - the previous Terminal command Debug menu for access to this

  Thank you

  Hello

  Safe Mode boot removes the system caches that can you help an update or upgrade.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

• External lightning SSD disconnect randomly after update of the Sierra

  I keep seeing 'disk xxx was not ejected correctly' with my Thunderbolt SSD external drives. It never happened until the Sierra has been installed.

  FYI: I have a 2013 end Mac Pro and a Thunderbolt pier with two SSD drive. They never lose the connection under previous OSX.

• FaceTime doesn't work after update of the sierra

  After the transition to macOS Sierra 10.12, Facetime does not accept my id to icloud and pass. "an error occurred during activation. Try again. '  Been trying for 3 days to activate it now.

  My ID Apple and the password work everywhere else but not in facetime.

  My mac is:

  MacBook Pro (15 inch, early 2011)

  Intel Core i7 2.2 GHz

  8 GB at 1333 MHz DDR3

  AMD Radeon HD 6750 M 1024 MB

  Intel HD Graphics 3000 512 MB

  256 GB SSD (OCZ-VERTEX4)

  Series Nmumber: C0 * RJD

  < personal information under the direction of the host >

  Hello

  Safe Mode boot removes the system caches that can help after an update or upgrade.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try FaceTime.

• MacBook Pro crashed after update to macOS Sierra

  After I tried to update my MacBook Pro for macOS Sierra, this screen came:

  In case you can't read it, it says "apple.com/support-1007F'.

  After restart my MacBook Pro, he asked for my Wi - Fi connection information, so I typed in it and it showed a loading bar. Then came to this screen:

  

  I didn't know which option to choose, what is called Apple Care to help make a choice. They said to choose 'Reinstall OS X' so I did. Then my screen says something like "click and drag to the browser that you want to download in" but nothing has popped up.

  I don't know what is happening with my computer. Hard drive failure? This update was not the largest update so I don't know why all this is happening.

  If you have any ideas or solutions, please respond! That would be incredible!

  Thank you guys!

  It seems that your Mac can not find the system disk. It seems that the drive has failed and your Mac is now in recovery mode.

• MacBook slow to wake up after update of the Sierra

  I was wondering if anyone else has this problem. Since the update to Mac OS Sierra, my Macbook Pro (retina, 15 inch, mid-2015) is very slow to wake up from his sleep at times. If I leave the lid open, awakening her from her sleep will take up to 10-15 seconds at a time there where before the update, he was instantly on and available.

  I must point out this isn't all the time, but it happens more often then not. And, I thought it was something with my Macbook specifically, then my wife started having the same problem on his own.

  Any ideas on that? I'm open to suggestions...

  Try resetting the SMC http://support.apple.com/kb/ht3964

• mouse very erratic iMac after update of the sierra; almost unusable

  BMI 5K, end of 2014, 4 GHz I7 mac 15.1 2.7. Since the update for Sierra, the machine became almost unusable. The reaction on the trackpad and keyboard time slowed considerably. Moving one finger on the trackpad does not produce a result so that no matter where 10 seconds to as long as a few minutes! Have rebooted several times, and at night last the cursor just froze. liquidation of forced closure. Very frustrated.

  Karl,

  Try to do an SMC reset according to the directives of the iMac SMC and the PRAM reset

• Flickering on Netflix after update of the Sierra

  Since the update of my MBP 13 yesterday, there is a massive amount of flicker watching Netflix mode full-screen.   Update of Silverlight has not solved the problem.

  Does anyone have a possible solution for this?

  Thank you

  I think I'm having the same problem! I don't know what is the appropriate word for what is happening, but my "flicker" happens every minute or so when I watch Netflix full screen. A very short time (about 1 second) the image type of duplicates and moves to the right very quickly. For me, this only happened on El Capitan.

  A few statistics:

  • MacBook Pro MF839 (13 inches, retina, early 2015, 128 GB SSD)
  • Sierra of MacOS

  Here are a few tests that I have worked on:

  • I made a safe start-up and also a PRAM Reset - no improvement.
  • This problem happens on Safari and Chrome, so I think that it is not associated with browser. Probably a problem with the video card rendering.
  • If I change the scale display mode and choose all options but the default, the flickering stops (so it only happens when he "feels like 1280 x 800').
  • If while I watch Netflix I move the mouse pointer to the top of the screen (display of the menu bar) and stay there, the flickering stops.

  @plantbased: could you share your settings, just so we know if we have the same problem, or if other people can help us?

• Drive external DRIVE not detected after update of the Sierra

  I upgraded my Macbook Air Sierra this morning. Since then, whenever I plug in my external Seagate HDD, it is not detected in the Finder, or see a shortcut on the desktop. However, it is visible in disk utility.

  I connected the HARD drive even air to my friend Yosemite running, and it works as usual.

  How the drive is formatted?

  Post a screenshot of what you see in disk utility.

• CSV file will not work in Excel after update of the Sierra

  Excel is not able to properly open CSV files more. I have two MacMinis to work with the same version of Excel/Office, but one with macOS Sierra displays all the data in the first column.

  Must be a problem that macOS as Sierra mess up to the deliminter. Very annoying.

  Barebones Textwrangler can force CSVs to use a standard delimiter that Office can understand.  Try to open your CSV with that and save it as MS-DOS text file.

• iMovie crashes after Sierra upgraded.

  I have a MacBook Air and yesterday I upgraded the OS to Sierra. After that, iMovie crashes as soon as it load and continued to do so throughout the day. I can't access a video of work I had done and really need to send it to my client to download on their website. I repeatedly sent reports to Apple and restarted my laptop 3 times. I can't force leave them, because the program is still not open long enough to do something.

  I also tried to get a fix to remedy the situation, but there doesn't seem to be available.

  Does anyone have a solution to this? My laptop is less than 3 years.

  Hi nybor99,

  I understand that you updated your MacBook Air to macOS Sierra and now the iMove application is not responding.

  You did it to Time Machine backup your computer before updating?  You install iMovie version 10.1.2 after update to macOS Sierra?  Have you restarted your computer?  You try to access a project in iMovie or did you finish the project and export a video file (film)?

  Try these initial steps to solve your problem:

  1 launch the App Store on your Mac app, click updates, and then click the button next to iMovie update.

  2. restart your Macbook Air.

  3. open the Finder.  Open the Applications folder.

  4. right click on iMovie and choose read information.   Check the version 10.1.2.

  5 double-click on the iMovie application to open it.

  If the problem persists please reply to this thread with an update, including error messages that you may encounter and we will study further with you.

  Take care.

• COMPUTER CRASHES AFTER UPDATE TO SERVICE PACK 2

  My computer crashes after updating windows service pack 2 for windows vista. I conducted analyses of virus and I'm virus-free. So, what can be the problem. I even restored the computer and updates appear and disappear until I update. I need help I have final exams in 3 days!

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner