iMovie; Video rendering error 60
I am trying to share a project to My Documents in iMovie to youtube, but when I try to share the images (720 p, 60 fps) it will always fail to export and share telling me there video rendering error 60. I think it all started when I downloaded Mac OS Public Beta 7 sierra because I didn't have this problem before this date. Also, I don't think it's a problem of space because I have almost 60 GB of free space. Do you have any suggestions?
This error means that there is a problem with the media. You can browse the project frame and see if you see a glitch. This is only possible if it is a relatively short project. Another option is to replicate the project open in the timeline panel and remove half of it and see if that will share. Keep the course of this process until you find the problem.
Tags: iLife
Similar Questions
-
export iMovie 60 rendering error. What does that mean?
I use iMovie for the 1st time (new version 10.1)
I did a 2 hour 20 minutes video in iMovie with added music, but when I try to export to my desktop it keeps not after 10 minutes with a "render error video 60' comment."
I use a new Macbook pro (running Yosemite 10.10.5) and I have 100 G of video clips on the hard drive (I left the office in case that is the question). But whenever I try to export it, it fails with the same error.
Any ideas?
I have the same problem (error rendering 60) whenever my movie is longer than an hour approximately. It happens the same way on two different iMacs (including a new one) and is independent of the resolution of the film. I have not found another solution that cut the film into small pieces and then combine them.
I would be very happy to hear about a real solution.
(El Capitan V 10.11.2 and imovie 10.1, but it also happened on earlier versions)
-
Video rendering error 10008 when using PNG on clip
As soon as I add a PNG above a video clip, it fails when I try to make. It gives the error code 10008 is. I tried several png. If you add in front of a video, it will work fine. As soon as you try to use the same image over the video (using a logo for example), it fails as stated above. This means that I'm not able to add a logo watermark to videos.
Please notify.
Thank you.
A simple alternative is to put your watermark on a green or blue background as a pdf file, then use the green/blue screen installation.
I remember reports that contain PNG used to ensure transparency in photo - images to have exactly the same dimensions of the pixel as the setting of the project, for example, 1920 x 1080 full HD. However, if this were not the case, I thought they still made, but have been converted to PDF, if transparency does not.
Geoff.
-
Error - 50 video rendering?
I made a small video in iMovie and it won't let me export it? Whenever I have try to export it to my office and in the library function, it comes up with a message "video rendering error - 50". " I exported literally just a video not long before trying to export it and it worked without a single problem, everything was simple and smooth sailing. Then I try to export it and it does not work? I tried all night to fix, I don't know what to do.
This means that something in the project is corrupted. Often, select all in the project calendar and then select copy and paste into a new project will solve the problem.
Geoff.
-
Everything has worked out well until the Skype 5.0 download. Since then, the video does not appear on my screen and displays the following message: "cannot start video renderer. Make sure you have a valid installation of DirectX.
The driver is up to date and I have DirectX 9.0 c v.
Thanks in advance for your help.
Hello. After several back-and-successive, customer relationship Skype sent me the link depending on where you can get an older version of Skype (4.2.0.187) and many other software if you need. http://www.oldapps.com/Skype.php I installed it and the audio and video are working as it should with the Logitech Webcam Pro 9000 and Windows XP.
-
movie maker 2012 16:9 rendering errors
I hope you guys can help
I used Movie Maker for years now, makig Time Lapse movies fropm photos
After the new update, the film hovers between widescreen (16:9 & 4:3) - prior to the rendering of that all the photos go to the 4:3 format and normal despite being created in a 16:9 format - I have same resizeda ll of the pictures to try to resolve the problem without success
On most of makes it, I get the video showing some photos of 4:3 16:9 and a few, so it seems to jump around :/
Also which edition titles, legends etc new version not larger screen to the editing area, the preview at the box at the top left - which makes it impossible to publish the titles and refine.
The system is Windows 7 x 64 on Intel Core i7, 16 GB of Ram with all the latest drivers, BIOS etc.
Please keep in mind, I'm not new to this app, and before the update, this worked fone as I had used 2 weeks before :)I have over 25 years IT experience too, so I checked all the usual questions - drivers, etc - everything works fine, the CUDA on the GTX card works in other applications (not the MM uses)
Any help appreciated
OK, he showed now
http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker-AV/Movie-Maker-2012-169-rendering-errors/83c40d4c-36b8-4fa8-9119-9504dbecf9c4 -
Could not complete the command of video rendering due to a problem with Adobe Media Encoder.
Hello, I use a macbook pro retina and before I was able to make the video without problem, and now it is popping up. I tried to remove and reinstall photoshop, but it was not useful. I would appreciate help or advice. Thank you!
Here is the error message I get:
Could not complete the command of video rendering due to a problem with Adobe Media Encoder.
Maybe try to download from this line:
https://creative.Adobe.com/products/Media-Encoder
If this does not work, you might want to try reinstalling the Psalm
-
How can I change the settings to run a game on my netbook Windows xp... video monitor error is not compatible with this game.
Hello
Unfortunately, most netbooks do not have the resolution of the screen (or the graphics hardware) necessary to run graphics intensive games. Your best bet would be to run the game on a more powerful machine with a larger screen, or alternatively, as last resort try connecting an external monitor.
-
I work as a student employee in the office of Computing Services from Ag Econ Oklahoma State University and would be able to use the unused processing capacity of our networked computers to speed up the rendering of the video on a main workstation. Is there a relatively simple way to do this? All of the computers that I want to use for this task are running Windows XP.
Hello Gavin R,.
Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to video rendering and would be better suited to the TechNet community. Please click HERE to find a community that will provide the support you want.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Product
Windows
Problem
Video hardware error
Date
06/11/2009 19:16
Status
Not reported
Description
A problem with your video hardware caused Windows to stop working correctly.
Signature of the problem
Problem event name: LiveKernelEvent
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Files helping to describe the problem
WD-20091106 - 1913.dmp
SysData. XML
Version.txt
Additional information about the problem
BCCode: 117
BCP1: FFFFFA8009C16260
BCP2: FFFFFA60026F1220
BCP3: 0000000000000000
BCP4: 0000000000000000
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Hello
BCCode: 117 is generally a problem of display driver (video) If you need to update (check the system machine
and the sites of the manufacturer of the device. You will need to remove and reinstall your video card a PC and not
edge. Perhaps a replacement card is necessary.If necessary you can perform in SafeMode with network - repeatedly F8 tap that you start.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Bug Video Renderer increased - where do I report it?
I found a bug in the Enhanced Video Renderer when used with DirectShow.
If I use the IGraphBuilder::Connect to connect some pin from the source to the input pin was, and then immediately call IPin::ConnectedTo, then connected sometimes returns VFW_E_NOT_CONNECTED.
I check the result of IGraphBuilder::Connect, and he succeeds. Also when I insert a loop to try again with a Sleep (1), the second attempt usually succeeds (and I have * never * seen the third attempt fail until now)!
So I'm sure it is a bug, and I would like to report it. However, I don't find a place where I can report bugs Windows SDK or Core.
Can you tell me what I need to do to post this?
I have this problem, since the work of new attempt-loop bypass, so I of course won't open a ticket paid for it. However, I think it should be fixed.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
Repeat freezing and Action Center "video hardware error error issues."
I am not very computer savvy, but I had this problem and will provide what I can. Since 7 September, I've been having repeated, very random questions from my computer to freeze. I have to force close down to reboot. It happens the same way every time, where sound begins to hum and the slider's been hanging around, and it freezes completely. What happened 9 times the date, the last being only 30 minutes ago. I tried to update everything possible I can drivers for windows updated. I play every day an MMO and tried swapping game pads in case it could have been the cause, but it has not fixed. I have been able to reduce it to scroll to the bottom of Web pages that are strong images and it begins to freeze, and I am currently using Firefox. I couldn't find anything in case the system log of the observer who matched each gel, except once with that I think that the Action Center was looking for a problem and he came:
Problem: Video hardware error
Files helping to describe the problem:
SysData.XML WD-20141002 - 1521.dmp
WERInternalMetadata.xml
I've done checks of viruses, malware, RAM test, even taken in a computer store to identify the problem and everything came back with no results. I'm at a loss where to go next, or what to try.
My profile: http://i.imgur.com/H2PaXGo.png
I currently have two monitors, ASUS, but these if overwrite problems began before I had two monitors so I ruled that out.
Edit: Nothing else seems to be wrong, it restarts normally and worked quite well other than the gel.
Update the drivers for the chipset of your motherboard site and get the latest drivers for your graphics machine
Do NOT use windows update to recommended, which includes drivers
If the problem repeats itself then clean boot PC & retest
-
Failed to read a downloaded video as error indicates that it does not support the file type.
original title: cannot read a downloaded video as error indicates that it does not support the file type. Codec downloaded but the video still fails to play or convert
Downloaded a http://tw.twent.chinayes.com/Content/20121016/kfnc1vt4eixak.shtml video, but he can't play on media player and fails to convert. Used download video converter.
Hi Davidscwong,
You may be able to install codecs to support the type of file, you try to read. See this document.
-
I had a new HP Pavillion Elite running Windows 7 and bought a HP Webcam HD 3110 which is supposed to have Skype compatibility (clearly indicated on the packaging). The webcam came with a bunch of software (ArcSoft Magic - i Visual Effects2, ArcSoft Webcam companion 3, ArcSoft Connect and ArcSoft ShowBiz).
When I turn on my webcam using the ArcSoft program it seems to work fine (I can see and record videos with sound). When I try to use Skype, the sound works fine (there is a microphone on the camera). In Skype, the video does not work and it gives me the message "cannot start video renderer. Make sure you have a valid installation of DirectX.
I have the latest version of the driver for the webcam, I have the latest version of DirectX (version11) and the latest version of Skype (version 5.0.0.152). I tried to use "ManyCam" program that some people recommended, but it did not work. Anyone else have this same problem? Someone knows how to solve?
Help, please!
I think HP has provided an update to the drivers of webcam which solves this problem... and Skype will include a fix soon.
-
Video compilation error - unknown error
Just got a PC brand new Intel i7 4790 and GTX970 GPU - copied some of my projects from my old computer and tried to return with first Pro CC v7.0. While making pop "Video compilation error unknown error" and if I try to make a second time, it freezes and finally crashes.
Tried two hardrives (HDD/SSD), and the clips are perfectly fine since they work fine on another computer. Any help would be welcome!
Thank you
Solution:
Update Windows 7 (which was a clean install) to service pack 1 - for some reason that did the job.
Maybe you are looking for
-
Satellite L300D - upgrade from Vista to Windows 7
Hello I have Satellite L300D and I want to improve my operating system with windows 7. There is a link given but its not working not not the link is "http://www.toshiba.eu/windows7-upgrade". So any body can help me? Thank you
-
HP Pavilion 15 - Indication NumLock on the key?
I came across some much more old threads about the absence of an indication of NumLock (you'd think HP would be clue now), but none of them does not seem to work or I have not executed correctly. I downloaded the HP on screen display Utility (SP55152
-
DeskJet 1510: Message output tray on Fake
My printer was working fine a few days ago, but now it shows the message to open the output tray while it is already open. I tried the help video provided, but nothing has worked. Help, please.
-
Hi team, I just want to know if it's true that the link of BlackBerry does not support the synchronization of the contacts that are saved locally on the BlackBerry smartphone. Thank you..
-
Videos in apps won't load is not after the upgrade to Windows 8.1
Error message saying "the impossible to play video. Try again. ' Is happening in the ESPN, NBC News app and NFL Mobile USA app apps. All the apps worked fine before the upgrade to 8.1. All applications are updated. Windows Update ran. Restarted.