Impedance and exit Angle of Phase with Keysight 4294

Hello

I use LabView to run my 4294A Keysight impedance Analyzer.  I was able to get the program to initialize and configure all settings and take the date of clearing the open and short my 16047 D test set-up.  After that I'm sticking my OTC in the son will continue formatting graphics and the autoscaling them.  When I use the memory tables and reading of data to view graphical waveform data and a table, the | Z | data (impedance) are displayed correctly but I have not been able to get to the exit data (phase) of theta will display correctly on the graph or table.  I tried switching active traces and use several functions to read but so far I can't make it work.

Anyone know how to make this work?

Thank you all,

Logan

T..

I could understand by comparison with another measure of instruments that the secondary output is the impedance of the imagination and here to compute the phase angle using the arctan of the imaginary in the primary.  Thank you for answering my problem and I hope that this thread can help someone who has the same problem.

Logan

Tags: NI Software

Similar Questions

  • Minimize, maximize, and exit buttons are not on the theme.

    I installed a theme on Windows 7 and minimize it, maximize and exit buttons do not have Firefox, even with the default theme.
    Is it possible to make the keys not linked Windows, or simply corresponding to the theme?
    Imgur mirror: http://i.imgur.com/FSEJFH9.jpg

    Well, this is not possible. Minimize, maximize, and close theme button is defined by the system, or in your case Windows. So, if you want to change this theme to match with Firefox, you will need to change the theme of windows by a correspondent.
    Using the default windows theme is recommended for good match because the theme designers create their themes as standard. so, it must match each theme of Firefox. Using the default minimize, maximize, and close windows theme will perfectly match with the theme of your browser or change your theme of browsers to match with the theme of the system. Anyway your choice.
    Thank you.

  • I really enjoyed having the option 'Save and exit' when I closed my browser, but since I updated Firefox this option is no longer available for me. How can I get that back?

    I currently have Firefox 4.0.1.

    Record of the tabs was not removed from Firefox 4, but it works a little differently.

    • By default, Firefox 4 will not ask to save tabs, but instead, it will automatically save your tabs on the output unless you're in private browsing mode. You can restore the next time by:

      1. by clicking on the Firefox button > history > "restore previous Session ', or
      2. type of Subject: House in the URL bar and press the Enter key, then press the button "restore previous Session."
      3. See: https://support.mozilla.com/en-US/kb/Firefox%20does%20not%20ask%20to%20save%20tabs%20and%20windows%20on%20exit
    • Note: This was a decision by the developers. On this forum, we are all volunteers without compensation here to help other users. Develop them and employees of Mozilla/Firefox rarely, if ever visit here.

    To display the message "save tabs and exit" when closing multiple tabs, you can do the following:

    1. Type of topic: config in the URL/address bar and press the Enter key
    2. Accept the warning message (promise to be careful)
    3. Open the preferences/list page
    4. Filter = browser.tabs.warnOnClose
    5. If its value is set to false, double-click top (in the lower panel) to toggle its value to true
    6. Repeat steps 4 and 5 for the 3 following preferences also:
      • browser.warnOnQuit
      • browser.warnOnRestart
      • browser.showQuitWarning
    7. See:

    Things to check if the tabs are not saved:

    1. Browsing history must be saved

      • Button Firefox: Firefox button > Options > Options > privacy > [X] Remember my browsing history
      • Menu bar: Tools > Options > privacy > [X] Remember my browsing history
    2. Also, make sure that you do not erase "Browsing history" when you use clear recent history or when Firefox is closed
      • Using clear recent history

        • Button Firefox: Firefox button > history > clear recent history
        • Menu bar: Tools > clear recent history
      • When Firefox is closed
    3. Make sure that you are not in private browsing mode or in private browsing mode permanent:
    4. If you have the Tab Mix Plus extension, and then clear the built-in session restore.

    You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

    • Adobe PDF plugin for Firefox and Netscape "9.3.3.
    • Shockwave Flash 10.2 r152
    • Next-generation Java plug-in 1.6.0_22 for Mozilla browsers
    1. Check your plugin versions on one of the following links:

  • Update of Adobe Reader (PDF plugin):
    • Within your existing Adobe (If you have already installed) drive:

      • Open the Adobe Reader program in your list of programs
      • Click Help > check for updates
      • Follow the instructions to update
      • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
    • Download the full installer (If you have NOT installed Adobe Reader):
    • After installation, launch Firefox and recheck your version.
  • Update the Flash plugin to the latest version.
    • Download and SAVE to your desktop, so you can find the Setup program later
    • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
    • Once the download is complete, exit Firefox
    • Click on the installer, you just download and install
      • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
    • Launch Firefox and recheck your version or up to the download link below to test the installation
    • Download and information: http://www.adobe.com/software/flash/about/
      • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
      • Use IE to go to the site above to update the ActiveX to IE
    • Download manual installers.
  • Update the Java plugin to the latest version.

  • See also "Manual Update" in this article for update from the Java Control Panel in Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
  • Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
  • Remove several extensions of Console Java (if necessary): _ http://kb.mozillazine.org/Firefox: _FAQs_:_Install_Java #Multiple_Java_Console_extensions
  • Java test: http://www.java.com/en/download/help/testvm.xml

  • What happened to the bookmark all tabs/Save and Exit/open session previous feature 4.0? If this was subscribed then 4.0 is of no use to me. I'll have to go back to 3.6

    3.6 each time I closed the browser with multi tabs open that he would give me the possibility to save and exit. Then when I opened it the browser it would give me the possibility to open the previous session. I could also put bookmark all open tabs. All of these features seem to no longer be present in 4.0. If that's the case I'll be forced to uninstall and reinstall 3.6.

    The new interface is the default on Windows Vista and Windows 7 only. To get it under Windows XP, you must hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

    If you need to access the menus, you can press Alt or F10 to display temporarily.

    See my first answer concerning access to the bookmark all tabs

  • Audio device rest in the entry and exit after uninstalling

    Hi, I had a problem... I have installed 2 Boom, didn't really need or it so I uninstalled with AppCleaner as usual (it deletes all files owned by this request, finally almost all files) so, when I had uninstalled I still had the 'Boom2Device' in 'BoomDevice' entry and exit... People say I should go to System/Library/Extensions does not work as I can not find Extensions... It's really weird, because I thought that you would not be able to start without him. "I tried"sudo kextunload com.globaldelight.driver.BoomDevice b" AND sudo rm - rf /System/Library/Extensions/BoomDevice.kext ' AND 'sudo rm - rf /Library/Extensions/BoomDevice.kext.

    None of this works. It says this (HE WAS PUT in A SCRIPT BUT I have TRIED AS of TERMINAL)

    (kernel) Kext com.globaldelight.driver.BoomDevice not found for unload request.

    Could not unload the com.globaldelight.driver.BoomDevice - (libkern/kext) not found.

    So please help me, I need to get rid of these input devices and output.

    http://www.globaldelight.com/support/discussion/1747/how-to-uninstall-boom-2

  • Run and Exit on request

    Hello, friends! I have a problem and I'll be thanked for all help! I want to create application of my VI with the application builder. I want to remove all the buttons and use the standard toolbars in the application. So, to do this, I need to create buttons Run and output in application. But I don't know how :-( It will be cool, if anyone divides for example, VI, which contains the feature for these buttons! Thank you!

    Here is an attached vi... just an example 9hittimg STOP leaving Labview)

    If you do not want to see the menu bar or the scroll bar and then CTRL + I-> properties-> appearance window VI-> customize and select the option to adapt accordingly.

    Also if you want to stop and exit the application use the "Quit LabVIEW" function available

  • How to record entries and exits in file

    Salvation or

    I have the program with comments and a few outputs

    I try to record the entry and exit to the Office of the word or excel as this files

    Read and write file spreadsheet screw should do what you want.

    I have not taken the time to try to decipher what your program does, but I think you could replace all those knots of feedback and build tables by an integer data type and the rotation of the digital function > pallet of data manipulation.  You still have a node of or rfeedback to UPDATE for each of the four signals.

    You duplicated code: divided by 65535, multiply by 2, and minus 1 followed by a > comparison.  That make a Subvi and place 4 instances on your drawing.

    These simple changes will make understandable schema, reduce its size to the size of a postcard, and facilitate subsequent changes.

    Lynn

  • Stop and exit Vi LabVIEW

    I don't understand why I need to stop it and leave labview vi.  When a program running finish, isn't it stop automatically?  Why is the judgment that VI necessary?  If vi stops automatically when it's done, could not the programmer write the program in such a way that would cause the vi to stop when necessary without using the stop vi?

    When a program runs in exe, why quiting labviw is necessary?  Is not all leave at the end of the program?  Developing, there is really no reason for the developer to the LabVIEW to exit automatically, right?

    jyang72211 wrote:

    When a program running finish, isn't it stop automatically?  Why is the judgment that VI necessary?

    You can never have the stop.vi. Its function is similar to the button stop unconditionally abort VI, even if he is caught in the trap in a parallel loop that cannot be stopped directly because of incorrect coding. Given the current state of the other parts of the code is random when stop is called, the result can be very unpredictable and the program may quit without a shutdown sequence appropriate, leaving your rotation of the instrument or the tensions of hight lit.

    For more details, read the online help. I never use it!

    'Quit LabVIEW' has similar problems. You don't really want to use it during development, because you have unsaved changes.

    My largest applications do not have a stop button and can only be stopped with the [X] in the upper right. (Like any typical program: when was the last time that you had first "stop" and internet explorer or MS word?: d) I use event filtering to catch it, throw, throw a clean shutdown and after all is done, either stop in the development system or exit labview in the case of a built application (see image code).

  • 9225 and 9227 Module Constant phase shift (Drift)

    Hello

    I wrote a large VI and the am acquisition voltage and current with the 9225 and 9227. The phase of the voltage and current constantly derivatives. Its not just for phase a bit for all of the portion; the phase constantly cycles from 0 to 360 degrees. I have an excel file with locations showing what I mean. Series 1 = voltage 2 = current

    I wrote a small VI to do the same thing with nothing extra. I have not yet add the data record. I just use a graph to plot the voltage and phase. The voltage and current were still off!

    What do you think. Timers are bad on the modules? Slow computer? DAQ assistants are not good? IM using the internal timers in the modules.

    Synronizing at the beginning does not help because the signals would still go out of phase when even later. The load is a piezoelectric tube.

    I'm using Labview 2011 and NEITHER cDAQ-9178:
    9225 3CH 300 Vrms 24 BIT simultaneous AIN
    9227 4CH 24-BIT simultaneous AIN 5Arms

    See you soon

    I forgot to change to continuous. I do usually. The major difficulty that I did was remove the trigger "Start Digital Edge" completely. The trigger wasn't working properly with what I put it in, "PFI0"... Once I took it out, I got a sample invaded. I played with the numbers of the sample for the clock sampling and playback. I don't know why to use 25000 everywhere has not worked. But when I dropped the numbers to 6250 or something of this magnitude, the VI finally worked.

    The VI works with or without the clock I specified (Mod7/AI/sampleclock), which is great news! Thanks for this tip!

    The current and voltage are finally in sync. They will never out of sync! Finally I can calculate the POWER!

    This digital trigger was the worst headache... Thanks for the tips!

    I write the VI and the code snippet to my completed solution.

  • the window on my computer does not return to its original size and I can't use the max and min and exit button

    my window is too far to the right and ive tried to get to the original size and it will until a certain point to the left. This leaves me unable to use the max and min and exit tabs

    Hello

    1. What is the brand and model of the computer?

    2. is it a laptop or a desktop computer?

    3. the problem occurs after leaving the game or program?

    4 did you a recent software or changes to the material on the computer?

    Method 1:

    If this happens when you leave a game, I suggest you to follow the steps mentioned in the link and check.

    Open the troubleshooter of display quality

    http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

    Method 2:

    I also suggest you go through the steps mentioned in the link and the Coachman.

    Change your screen resolution

    http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

    Method 3:

    Step 1:

    I also suggest you to check if the problem persists in safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2:

    You can also check if the problem persists in a clean boot state.

    Clean boot:

    This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

    Note: when you are finished troubleshooting, follow step 7 article to start the computer to a normal startup.

    Hope this helps and keep us posted.

  • How can I stop my brushes can react to the tile and the angle of my brush,

    How can I stop my brushes can react to the tile and the angle of my brush, this isn't the rectangular window that comes with the brush and his animation, I use my brush theres an animation that follows my brush and reacts or simulates the angle of my pen, it drives me crazy, if anyone knows how to disable it please let me know Iam using a wacom 13hd, when I use my mouse doest problem persists

    This is a normal behavior when using hair brushes

    https://helpx.Adobe.com/Photoshop/using/creating-modifying-brushes.html#bristle_tip_shape _ options

    You can make the cursor disappear on the button down if she really worries you

  • Views of Angle MultiCam sync with Clips

    I ran into a weird issue with a multicam sequence.  I have 4 corners upward, and the views of angles 1-3 are all out of sync with their own clips by a variable number of seconds.  The clips are all perfectly synchronized in the chronology, and the part "out program" display multicam is correct.  It is disconcerting. Multicam playback is also really * restless where, normally, it is very smooth.

    I have another multicam sequence in the same project that is configured in the same way and rereads dead-end, with all views of the angle in synchronization.

    Anyone seen this before?   I emptied all of my preview and cache files and import the sequence into a new project and it's always wrong to behave.

    Also, for some reason, on load audio and video clips keep coming back on 'Even as project', even though I have to direct them to a folder on one of my paintings, and save the project.

    Thank you.

    4 angles on a 1080 p timeline.  All the clips were shot at 23.976:

    (1) RED Epic 5 K HD resized to 1080 p, 23.976

    (2) canon 5 d mk3, 1080 p, 23.976

    (3) canon 6 D, 1080 p, 23.976

    (4) RED Epic 5 K HD fist of 1:1, 1080 p, 23.976

    I solved the problem!  While footage source for multicam problem sequences start to 00:00:00:00, they all contain sequences where the audio begins at the beginning, but the video track starts a few seconds later.  I inserted a black video in the beginning of the video track of the sequence of each source and the angle views were resolved instantly.

  • On 32.0.3 start-up load home page, but on the output not 'save and exit '.

    I load my homepage to Google & FF. Latest release asked me on 'save and exit '. Now she leaves everything and all my tabs are undervalued.

    By design, your open windows and tabs will be saved so that you don't need to tell Firefox to save. Some exceptions would be:

    • Closing a private browsing window
    • If Firefox is set to clear the history at the stop

    I don't know when the message was deleted, but I think it could have been a few versions ago. I don't remember having seen it myself...

  • SAVE AND EXIT THE PARTY

    Hello
    I have how I regret the update! (to 32.0.3)
    Where is my 'save and exit' (at closure) option gone?

    I followed all the advice on the forums to pick up this function... but nothing helps.

    Yes, I can get the warning that I'm closing multiple tabs. (Thanks for telling me what I know,  instead of offering something useful!)

    To be precise on the subject: config... browser.showQuitWarning is set to true

                                                             browser.warnonquit is true
                                                         browser.tabs.warnonclose is true

    And in Tools/Options/general/start "show my windows and tabs from last time is selected.

    What am I supposed to do?

    If I go back to the last version will be the OPTION (to save a session OR let it lapse) IE "SAVE and EXIT" restore?
    I have to stop in future updates

    You will get the warning that "show my windows and tabs from last time" is selected as who will restore open tabs automatically, so you will not lose them.
    To get this warning, you must select another parameter of start (home page or blank tab).

  • This cable or accessory is not certified and may not work reliably with this iPad.

    I get the following message: "this cable or accessory is not certified and may not work reliably with this iPad." Oh, and the message repeats every so often. At first, I thought maybe would it be the earbuds, but I get the message, even though no headphones are attached. I get the message when no cable is attached. This occurs even if no cable is fixed. A hypothesis as to what is happening there?

    < re-titled by host >

    These alerts can appear for several reasons: the cable is defective, damaged or may not be certified by Apple, or your device might have an accumulation of dirt or damage. Follow these steps:

    Before you try the following steps, make sure that the USB cable and your port is clean!

    1. Restart your iOS device.
    2. Try a different cable certified by Apple or a charger.
    3. Make sure you have the latest version of iOS.
    4. Contact Apple support to implement the service.

    I hope that you will charge your iPad in no time!

Maybe you are looking for