implementation of a queue with this vi

Similar Questions

• This cable or accessory is not certified and may not work reliably with this iPad.

  I get the following message: "this cable or accessory is not certified and may not work reliably with this iPad." Oh, and the message repeats every so often. At first, I thought maybe would it be the earbuds, but I get the message, even though no headphones are attached. I get the message when no cable is attached. This occurs even if no cable is fixed. A hypothesis as to what is happening there?

  < re-titled by host >

  These alerts can appear for several reasons: the cable is defective, damaged or may not be certified by Apple, or your device might have an accumulation of dirt or damage. Follow these steps:

  Before you try the following steps, make sure that the USB cable and your port is clean!

  1. Restart your iOS device.
  2. Try a different cable certified by Apple or a charger.
  3. Make sure you have the latest version of iOS.
  4. Contact Apple support to implement the service.

  I hope that you will charge your iPad in no time!

• Queue with computerized name not found

  Hello

  I have create a queue to use for communication with a motor at a distance as follows:

  In an expression:

  Locals.Queuename = "MyQueue".

  StationGlobals.RemoteQueueName = '-' + Locals.Computername + '-' + Locals.Queuename

  where I have the environment variable %% Locals.Computername.

  Then I do a step queue with the option to create and StationGlobals.RemoteQueueName as the parameter name.

  When subsequently I do one-step queue with the "GetStatus" option on a variable

  Locals.Queuename = "\\\Computername\\MyQueue".

  This works. When I do it on StationGlobals.RemoteQueueName, the entire operation hangs. I usually actually restart SeqEdit.

  I run TestStand 4.1.0 on Windows XP.

  Any ideas what can cause this behavior?

  Best regards

  Peter

  Thank you for providing us with a sequence to reproduce this problem. I was able to reproduce it by running your sequence. What you are picked up and supposed to work. I have created a problem in our database of follow-up to look further into this, and it will probably be fixed in a future version of TestStand.

  The problem may occur when you make a Dequeue on several lines at a time where two or more queues are on the same machine where at least one is specified with a simple name, like a local in the process queue, while at least another queue is specified with a machine name or an asterisk leading to be created under the global name of the machine. You can work around the problem in one of the following ways:

  (1) make the queues global everything on the machine instead of using local queues (as long as the consequences of that are otherwise ok for you). For example, you can call your "Queue1", "* Queue1" instead, which will overall make your current computer, but will also keep blocking occurs.

  Or

  (2) put the remote queue on a machine that you do not also to the expectations of the local queue with in the same operation.

  (1) is probably the most practical solution. Let me know if this workaround is not enough for you, or if you need assistance or have further questions related to this.

  Hope this helps,

  -Doug

• Best way to initialize a queue with the elements of the array

  Hi guys

  I'm looking for a bit of performance optimization...

  I'm developing an application of measure of noise using LV8.6 and Win Xp /Win 7.

  To say things very simple, I have a loop that samples and a loop that does the calculation. data are shipped in a queue waiting, producer / consumer lifestyle.

  So far so good.. It is - is there a specific and more optimized way to declare this queue?

  I was wondering if the notifier queue with an initialized in fixed size array element (the number of samples PR. read sound card will be known at run time) would produce a line which would be less burdensome on the dynamic memory compared to an allocation obtained using a simple queue control no value.

  I have attached a copy of Θcran to maybe make the most obvious question...

  I've been thru "clear as mud" thread, as recommended in other threads that covers this topic - but I get very high-tech, and I lost my way into it so... If you are looking for a more simple "you must use the #x solution, because...". »

  Thank you in advance.

  H ha wrote:

  you use solution # 2 because the initialization of an array first and by replacing its elements allocates any memory needed both as opposed to reorganize the memory as the table grows in size.

  That your response has to do with a queue?

  Using the option 2 is not a thing about creating a queue with a fixed number of items. Either you start with an empty queue. If you used a constant empty table with option 1, then this would require less memory in the VI himself. If you want to set the size of the queue, thread of something of this entry.

• I'm unable to see my personal folders in windows live mail. can I have someone help me with this?

  Earlier, I was able to move a message in my Inbox to a folder, but has not been able to implement the records to look at a message that I had already moved.  Now, I'm not able to move the message to a folder either.  If anyone can help with this?

  Windows Live Hotmail is supported in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/Hotmail?tab=all

• Which is wrong with this reading of the audio files...! ???

  Hi all

  I try to read two different audio files with the following code piece. individually, they play well. When I try to play at the same time which is at the same time, it is give IllegalStateException and does not play any audio file.

  When I play them separately, they play well. My requirement is to play 1 file as background music and another as foreground.

  Audio playback code.

  public class Audio implements Runnable//extends Thread
  {
      private Class clazz;
      private InputStream is;
      public Player player;
      private String audiofile;
      private int fileType;
      private int mode;
      public Audio(String path, int type, int mode)
      {
       audiofile = path;
       fileType = type;
       this.mode = mode;
      }
      public void run()
      {
                     //this sample demonstrates playing an MP3 file that has been
                     //added as a resource to the project
  
                  try
                     {
                        //retrieve the MP3 file
                        clazz = getClass();
                      //create an instance of the player from the InputStream
                        is = clazz.getResourceAsStream(audiofile);
  
                        // 1-- mpeg, 2-- wav audio files
  
                        if(fileType == 1)
                            player = javax.microedition.media.Manager.createPlayer(is, "audio/mpeg");
                        else if(fileType ==2)
                            player = javax.microedition.media.Manager.createPlayer(is, "audio/x-wav");
                        player.setLoopCount(mode);
                        player.realize();
                        player.prefetch();
                        player.start();
  
                      } catch (Exception ex)
                      {
                          UiApplication.getUiApplication().pushScreen(new CloseScreen("Hello"));
                      }
              }
  }
  

  // if call this, commenting section2 it works well
                 //section1
      Audio at = new Audio("/neon1.wav",2, -1);
      Thread at1 = new Thread(at);
      at1.start();
  
  // if call this, commenting section1 it works well
                 //section2
          Audio at3 = new Audio("/neon1.wav",2, -1);
      Thread at2 = new Thread(at3);
      at2.start();
  
  // when i uncomment both section1 and section2 and execute it is not playing giving an exception IllegalStateException.
  

  all aid should be of great use.

  Thank you and best regards,

  PraveenG

  On the storm, it is not possible to play 2 sounds loaded from a file at a time.  If you try this, the first sound stops and the second sound will be played.

  You can, however, load and play a sound (background music) and play other sounds (sound effects) by using Alert.startAudio ().  The first noise not would be cut.  The only problem with this is that the Alert.startAudio sounds are not the best.

• Error: "there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider staff or the support package' when trying to install iTunes on Windows 7

  Original title: DLL required for uninstall and install iTunes?
  I get this message: there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider to support personal or package.

  I can't install and uninstall iTunes no matter what I do. Help, please!

   
  Hi stjimmy9999,
   
  1. are you able to install other programs on the computer?
  2. what version of iTunes you are trying to install?
  3. have you SpyCatcher program installed on the computer?
   
  Program SpyCatcher interrupts the Windows Installer to not save the files during the installation of iTunes.
   
  Try these steps and check the result.
  Step 1: Download the latest version of iTunes
  a. visit http://www.apple.com/itunes/download/
  b. click on 'Download Now' and save the file to the desktop.
   
  Step 2: Install the program as an administrator by disabling all programs currently running on the computer, non-Microsoft
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and right click on the Setup file of iTunes, right-click on the file and click Properties.
  d. click on the Compatibility tab and place a check on "Run this program as Administrator" under "privilege level".
  e. click ok to apply the changes.
  f. open the file and install it.
  g. Article, follow "step 7: reset the computer to start as usual.
   
  For more information on installing iTunes, see the following article: difficulties to install iTunes or QuickTime for Windows
  For further assistance with this, please ask a question about iTunes Forum

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can we can implement App - V license with the SMB file streaming

  Hello

  We are currently in place a complete infrastructure of App-V 4.6 SP2 in our Organization, and we have all applications stored in a SMB file server. We have two App - V Management servers related to a balancerto load. In addition, we have configured the ApplicationSourceRoot registry key in the machines of Client pointing to the SMB file server. The flow of applications successfully from the SMB file server. So far everything was fine.

  However, when we try to implement the licensing options we see that App - V licenses work with RTSP protocols. In addition, we tried all the best we can, but we could not implement RTSP streaming from a SMB file server.  Protocol of RTSP protocol leader changes: / / with the use of the ApplicationSourceRoot registry key.

  Can anyone suggest a work around for this problem, where we can implement App - V license with the spreading of the SMB file?

  Thank you

  Arun

  Arun

  Server issues should be placed here

• How can I change the depth of the queue with powercli 5.5?

  Hello

  I want to put the queue on my 5.5 ESXi Deth, can anyone help me?

  After I try:

  PowerCli 4.1 connect to ESXi 5.5 = OK with this transaction: Set-VMHostModule-Options "ql2xmaxqdepth = 32.

  5.5 PowerCli connect to ESXi 5.5 = error with: Set-VMHostModule-Options "ql2xmaxqdepth = 32.

  How can I change the depth of the queue of my QLogic card?

  Thank you

  Philippe

  Try to use the Get-EsxCli interface, see 3 Re: length of the queue  

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• Need help with this gallery of xml!

  I have build a gallery but its very simple... There are pictures of the xml file.

  I have attached all the zip files.

  I just want two things if anyone can help.

  first of all when I press the next button, he's going to the next image, but without effect. It just displays the following image... I want to incorporate the effect of dragging when the image is changed to another.

  and secondly, I want to use the AutoPlay feature.

  Once swf starts images came one by one with a vertical drop of a few seconds.

  Thanks in advance... I really need help with this..!

  For the look of sliding effect using the actionscript class Tween.  Allows you to create motion tweens using the code.  The example below will be tween property _x of the instance named anObject from 0 to 300 in 3 seconds...

  import classes before using

  Import mx.transitions.Tween;
  Import mx.transitions.easing.Regular;

  TW var = new Tween (anObject, "_x", Regular.easeIn, 0, 300, 3, true);

  To implement an enforcement function auto you need to import all the images first, in the order, then you will need to use form any controlled timer, such as setInterval (with clearInterval not to need) in order to have things turn on automatically by some part-time

• What is the problem with this WHERE statement?

  What is the problem with this WHERE statement?

  < cfquery datasource = "manna_premier" name = "kit_report" >
  SELECT SaleDate,
  TerritoryManager,
  Distributor,
  DealerID,
  Variable,
  US_Dealers.ID,
  DealerName,
  DealerAddress,
  DealerCity,
  DealerState,
  DealerZIPCode
  Orders, US_Dealers
  WHERE US_Dealers.ID EQ DealerID AND SaleDate BETWEEN #CreateODBCDate (FORM. Implementation) # AND #CreateODBCDate (FORM. End) #.
  ORDER BY SaleDate
  < / cfquery >

  It's driving me crazy!

  Syntax error (missing operator) in query expression ' US_Dealers.ID EQ DealerID

  You accidentally use the CF equals operator: "EQ".

  Instead of MS Access: «=»

  [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver]...

  in a query expression. AND SaleDate BETWEEN #10/1/2009 #-October 18, 2009 #'.

  I don't see how CreateODBCDate() would produce these values.  But maybe it's just a quirk of the error message?

• How to download IOS, which is said to not be compatible with this computer

  I have IOS 10.7.5 I ordered IOS Mountain Lion, when I try to download it says that it is not compatible with my computer and will not download.

  I would like to still be able to have the IOS on an external drive, how I work around this problem to download the software.

  Thank you

  How old is your Mac? Are you sure if your machine is not compatible with this OS X it can be used on your Mac?

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support

• purchase fail because I used to pay by gift card iTunes, so I chose any of the theme of credit card. Credit is danger, I don't like to pay with this method. Can iTunes gift card can't pay inn - app?

  purchase fail to cause I used to pay purchase iTunes gift card, so I chose any of the theme of credit card. Credit card is danger, I don't like to pay with this method. Can iTunes gift card can't pay inn - app?

  You should be able to make in-app purchases with gift cards. What happens when you try to do?