Implementation of a STOR. In a household of Mac E wireless adapter

Similar Questions

• Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

  I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

  If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

  The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

  I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

  ANY help with this problem would be highly appreciated.
  Thanks in advance.

  Hello

  Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
  This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

  The 3 LEDS have the following meaning:
  Above 1 LED is on / off and lights up green if the adapter is running
  The LED 2 is WiFi link and turns green where wi - fi access has been established.
  The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

  How to connect?
  Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

  You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

  Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

  In the preview, you can see the current version of the firmware, storage devices, network access point information.

  The list of devices shows detailed information on connected devices.
  Within the network, you can find the devault sotre.e wireless adapter network settings

  Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

  You can also map the card wifi as a network drive in Windows system.
  In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.

• Toshiba stor. Connection wireless adapter E smartphone problem

  Hello world.
  I have a shop. E wireless adapter I can not connect with some devices. When I use my laptop, it works perfectly. I also tried with a s4 Galaxy and a Note 2, both work.

  My Samsung Galaxy 4 marks used to connect to this subject when I was on 4.4 kitkat firmware, I could access my hard drive without any problem. But since I upgraded 5.0.1 is not connected to its network Wi - Fi. I updated the adapter android app wirelessly on game store that shows an improvement on the lollipop. Network adapter is displayed on my rating 4 but when I type the password it does not connect. When I remove the password protection, it connects to the WiFi but I can not access my files.
  I also have the problem of connection with my sister's computer, it shows the Wi - Fi, but can't type the password.
  Does anyone know how to fix this?

  Thank you so much everyone.

  Hello.

  I would like to add that my sister's laptop is on windows 8.1, that would cause it not to connect?

  Thank you

• Flash CC: publishing on the App Store possible? Without the Mac? Without buying extra software?

  Is it possible to publish an AIR for iOS app to Apple's App Store with Flash Professional in Windows? If so, how? If not, how can I and how do I especially without using a Mac? Is this possible without having to buy another software?

  You use iTunes Connect to download your application and while Mac has a much more integrated process you can just use the online version of iTunes Connect to add an application. Here is me logged into my developer account (on Windows in Chrome) using the online system, immediately after I clicked on "add a new application:

  

  When you join the developer program, you have a huge amount of resources at your disposal. Guidelines, configurations for your apps, etc. This is where I mentioned, you will need some additional tools that do not come with Windows, such as OpenSSL. With OpenSSL, you would be able to generate the necessary certificates to "sign" your request. When you export your application from Flash you will always knock Control Panel certificate you requesting your certificate (file .p12 you generate) and your mobileprovision (created in your Apple Developer account online). You cannot export to Flash without these elements.

  After using guides available for you as a developer Apple and make sure that your application complies with all its requirements, you are free to submit your control application. Apple will review your app for violations of the guideline and if all together there are anywhere from a few days to a few weeks (while crazy) for your application to be approved or refused. If you get denied that they will return the reasons why your app has failed the test. You must then resolve the problems and submit again and wait. Finally, your application is approved and you will be on the store.

  Without a Mac.

• Toshiba stor.e wireless adapter, WiFi password

  Hello, my problem is that I forget my wifi password
  Toshiba STOR. Connection of the E, solution no wireless card

  There is a small hole

  

  Use a paper clip or other object and that insert into the hole.
  Hold 5-10 sec and the settings must be reset again default

• How to connect and use Stor.E TV with Apple Mac

  Hello

  I just bought the Stor.E TV but I use Apple mac.
  Y at - there a program I can download or just a way that I can connect my Stor.E to my computer?

  At the moment it is locked.

  Thanks :)

  Hello

  I m not very good if you could use this since there is no special software for MAC OS leopard.
  But the TOSHIBA StorE TV supports a common USB port and can be connected to the mac / laptop using the common USB plug a cable play

  Perhaps that the MAC will recognize this external USB device automatically and you won't need to install any software or drivers

• Why can not download El Capitan from the App Store on my brand new Mac Mini?

  I tried to download El Capitan on the App Store for 2 days without success. The wheel at the top of the App Store window just turns and turns but nothing happens. Anyone know what is happening?

  Hello! Click the Apple logo in the upper left corner of the screen and select "at about this Mac".

  What operating system is show this menu?

• Where PSE does not store the files on a Mac

  I just installed 10 PSE on my MacBook. I had been using Iphoto'08, but when I bought a new camera, I wanted something more sophisticated to organize my photos and editing and improve their.

  So far, I installed 10 PSE with success and played with him. The Organizer works well and does what I want it to do. My intention is to use Organizer for new photos and leave the "old" about Iphoto for now. However, what I can not function, is where PES stores files on Mac after that I have working on it. It doesn't look like they are back in Iphoto, as I made changes to the photos that do not appear in there.

  Can someone enlighten me on this?

  Yes, that's all. You have now. PSE does not normally create something other than a database entry, not a new file.

• Store.E wireless adapter Firmware

  Three questions:

  1. I can't find an update firmware for the device.

  2. I can't seem to find the components to build the new firmware for it (it is obviously using a linux GPL, etc.)

  3 Telnet seems to be activated... What is the username/password so I can't change, because it obviously is back.

  Thanks for sharing the link

• Questions about the stores in iProcurement

  All,
  
  I have a few questions about the implementation of iProcurement stores-
  
  1 oracle comes seeded with 2 stores "Backend" and "Exchange.Oracle.com. We do not have the use of these stores. I don't see an option to turn them off. Is it advisable to delete them? They occupy unnecessary space and are seen first. I read this on Metalink Note ID 429470.1 - "NOTE: while the value can be changed, it is highly recommended to not under any circumstances ever remove"Main store"page stores to manage content in iProcurement catalog administrator responsibility.» Do not know why.
  
  2. we have a Punchout for Dell U.S. catalog store and a catalog of information for Dell International. Buyers of Dell are iProcurement to each punchout to place their orders from Dell for the USA (shopping cart returns to iProcurement) - or - just use the store Dell International to go to an external URL and place their orders here (who do not return to iProcurement). What we see is - when the user clicks on the icon Dell us, it is taken directly to the URL of the PunchOut of Dell, but when he clicks on the Dell International icon, he was first taken to the list of catalogs available to the store (only 1 available catalog) and the user must then click again on the link Dell International. Is there a way to configure the Dell International icon to behave the way behaves in the Punchout icon - i.e. directly take the user to the Dell page without a need to show the list of catalogs.

  Hey,.
  To answer your Questions
  1. you can always delete those either if you want to... The reason why the link Meta Notes say not only not to delete the main store is
  i. because main store has all of the Local content in iProcurement (i.e. If you have any installation of items in the inventory you and them Module iProcurement Enabled (IE can be purchased at iProcurement) and any other article of local catalogues/categories Loaded using the BULK LOADING in iProcurement is also removed.)
  II. you can always delete the information Exchange Oracle store if you do not use.
  I would advise so do not remove the main store. Instead, you can change the sequence of the display of the stores you iProcurement Page.
  Browsing ==> Internet shopping Catalog Admin (RESP) ==> eContent crib ==> content management ==> stores ==> press the update sequence and make sure that the sequence number for main is superior to any other store so that the hand store falls last in the House of iProcurement Page

  2.i don't think that there is no option to do this. but you can always open an SR with Oracle about it and ask this question\

  hope that answers your Question.

  Thank you
  SANTU

• Implementation of dumps for several table

  Hello
  Is it possible to configure the < dumps-plan > element or implement dumps to get data from multiple
  table. Currently the sample xml and dumps in the tutorial is configured to a single table.
  
  Thank you
  -Trapani

  Hi Thiru,

  As Rob mentioned, you can implement dumps to do just about anything you want: do a join between tables, run several queries for data from multiple tables or even access non-base data system, such as an existing system or a web service to retrieve the data. Consistency really cares how you implement your cache store and where you get the data, as long as you return a single object to the load method, which must be inserted in the cache the cache store is set up for (or in the case of loadAll, many objects in a map).

  However, what I didn't understand not your question is if you want to load the data of several related tables to create a single object (an aggregate in DDD terminology), or if you want to create different entity objects based on the data in each table and put them all in the cache. Normally, you should have a cache by entity type, while the latter is discouraged until you know exactly why you do and are recommended to create a separate for each entity type cache and use different cache stores for them. Otherwise, you will encounter issues if you try to index your cache or run queries on it, because these characteristics depend on the schema of compatible entry.

  However, if you load an aggregate, you can decide to store the entire aggregate object in a single cache, in which case you will probably eventually query several tables related to construct an instance of an aggregate, or you may decide to store root cluster in its own cache, and separate the low related entities in caches, once again a cache by entity type. The choice should really depend on the size of small entities within an aggregate and access model data, so it is difficult to provide general guidance. However, if you do not end up storing weak entities in separate caches, it is usually advantageous to use the key association to ensure that they are located in the same partition as their aggregate root.

  Kind regards
  ALEKS

• App store disconnection under macOS Sierra

  Since I updated to macOS Sierra, it seems not be anyway to log out of the App Store.  I do not particularly want to stay connected all the time.  Does anyone know how to sign out?

  Hello, JBob2!

  Thank you for using communities Support from Apple. After reading your post, I understand that you do not want to be able to disconnect from the Mac App Store - I definitely want to make sure that you can do!

  In this article, all you need to do is click on Store > Sign Out.

  Mac App Store: Sign in and out

  See you soon!

• iOS 9.3.5 and App Store

  As I upgraded 9.3.5 only shopping load the upgrade pages. I am unable to see explored, can't add search for an application, or see recommended charts and top, are still available on OS X on my MacBook but my iPad and iPhone have not App Store work which I suppose has been changed under the update of iOS. Apple seems to confuse this with iTunes app store, but I use iOS App Store.

  The app from the App Store on your iOS device is the iTunes App Store in iTunes App on Mac or PC. Apps strictly for iOS devices.

  The App Store on your Mac is an another App Store, it's the Mac App Store, but it uses the same iTunes account. Apps strictly for Macs.

  Sign out of the App Store, restart your modem/router and your devices and then reconnect.

  By the end of 2012 Mac minis, macOS?  Watch, 38 mm silver AL, Watch BONES 2.2.2; iPad 2 Air & iPhone 6 + iOS?  Apple Airport Express

• where is iWeb files store in OSX El Captain v. 10.11.2?

  where is iWeb files store in OSX El Captain v. 10.11.2?

  Can not find any directory under the "Library - Application Support" iWeb as suggested a few comments on the internet.

  Furthermore, can someone advise how to download the web site created by iWeb to internet, I tried "upload" function of iWeb and he just direct me to log on to the iCloud account.

  Thank you very much

  If you use a Mac with El Capitan, then there will not be any store for iWeb, because new Mac which not been shipped with iWeb for a long time.

  However, if you happened to load iWeb on your Mac from a disc, and then iWeb stores files of domain.sites under your user/Library/Application Support.  / Library/Application Support is the library system and you won't find anything here .

  To access your library from the user, you must click on the menu go upstairs and then press the 'alt key ' to your user library, but you may create, as the Mac ship automatically with iWeb, as has been the software not supported for the last 4 years or so now.

  To publish a site on the web, you need to get an account among many hosters autour - GoDaddy web hosting etc.  If you don't have a hosting account, that means first to register a domain name of your choice and then to buy the hosting for this, you will not be able to publish.  iCloud offers no accommodation, only a storage.

  Go to GoDaddy and register and domain name and purchase hosting and then download your site.

  Maybe you should consider new software also, like iWeb is old and not taken care of, then take a look at EverWeb instead.

• Using more five computers with Mac App Store

  I have five MacBooks, four MBA and a MBP. These were bought over a period of five years or more.

  I'm considering buying a new iMac soon and wonder how it will affect my use of the purchased as well as the "free apps" apps from Apple (Pages, Numbers, Keynote, iMovie and GarageBand).

  My Apple ID shows that I have five authorized computers.  I also have a variety of associated with the ID of Apple iOS devices.

  I intend to use the new iMac for editing movies mainly and a few Pages and Keynote work.  I have no intend to download a purchased applications currently in use with the MacBook.

  My question is that I'll be able to download the "free apps" using my existing Apple ID?

  I don't want to remove the five and start over.  I can live with having the iMac limited to the 'free apps '.

  Hello

  According to the Mac App Store FAQ...  Mac App Store: frequently asked Questions (FAQ) - Apple Support

  "Apps in the Mac App Store can be used on any Mac that you own or control for your personal use."

  So you use the same Apple ID on all.

  Yes, you can download free applications using your existing Apple ID

  If you use up your permissions:

  If one of your 5 permissions lies on a computer you do not use much more, Deauthorize it. If you have sold or transferred to a computer that used one of your 5 permissions, you must remove all your computersand then re - authorize each that you still use.

  Here > authorize computer in iTunes - Apple Support