Implementation of HP Officejet 6500 has; don't know how to connect to the web w / wireless home network

Similar Questions

• don't know how to find out the server for my email information.

  I had to reinstall Windows Vista (my computer was a mess), and now I don't know how to get information on the mail server

  I don't know how to find out the server information I need

  to set up my email again.

  Also, my pictures 'lost' since I have done this?

  Hello

  Contact your ISP (Internet Service Provider); They provide your broadband / dial connection.

  Ask them to:

  1. your username with them

  2. your password with them.

  3 incoming mail POP3 server.

  4. the outgoing mail SMTP server

  All the settings that you need to come from them, not Microsoft; and they are usually happy to help you set up your e-mail program.

  You can use this guide to set up Windows Mail, too:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  A relocation normally wipes the hard clean everything, as part of the resettlement process.

  Two things you can try:

  1. find a windows.old folder (depends how you reinstalled Vista)

  "How to restore your personal files after performing an installation of Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/932912

  2. This program has had good results in data recovery in circumstances similar to yours.

  http://www.Piriform.com/Recuva

  See you soon.

• I don't know how to re-enable the microphone of the headset on my Acer Aspire E15

  Hello

  I have a big problem with my laptop, I don't know how to re-enable the microphone of the headset on my Acer Aspire E15

  I was able to remedy.

  Here is the solution: http://community.acer.com/t5/E-and-M-Series-Laptops/Headset-microphone-is-not-working-on-Aspire-E14-...

• I built in webcam on my laptop but I don't know how to get to the top to see?

  original title: built in Webcam

  I built in webcam on my laptop but I don't know how to get to the top to see?

  What should I go for?

  First of all, your system must have appropriate drivers for your webcam and then you need an application to use it.

  You could get the app and drivers both with your PC you can use these, otherwise go the manufacturer's Web site and find what is appropriate for your system.

  You can try Windows Update for drivers too.

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.

• Don't know how to connect to phpMyAdmin to flex

  Hello

  I am new to flex and phpMyAdmin.

  I have a php file named "myTest, php, have a wamp server and a flex project.

  I want to connect to an application that connects to my database, checks the text of textinputs for the user and passwords and shows me alert with the text "login succeeded or failed", but every time I run this application it shows me "failed to connect". I don't know what is of couse a problem it shows any errors. Maybe you could help me? Tell me what I'm doing wrong?

  (hope you understood what I want to do)

  Sorry for my English...

  myTest, php:

  <? PHP

  echo "<? XML version=\"1.0\"? " "> \n";

  $hostname_conn = "localhost";

  $database_conn = "test";

  $username_conn = 'root ';

  $password_conn = "";

  $conn = mysql_connect ($hostname_conn, $username_conn, $password_conn);

  If (! $conn) {}

  die ("not connected:".) mysql_error());

  }

  $db_selected = @mysql_select_db ($database_conn, $conn);

  If (! $db_selected)

  {

  die ("not connected:".) mysql_error());

  }

  $query = "UPDATE connection SET password = 'veikia' WHERE username = 'Admin'"; "

  $testresult = mysql_query ($query)

  $user = $_Post ('user');

  $pass = $_Post ('pass');

  $results = mysql_query ("SELECT * FROM connection where 1");

  $loged = false;

  and that ($row = mysql_fetch_assoc ($results));

  {

  if (strtolower ($user) == strtolower ($row ['username']) & &)

  strtolower ($pass) == strtolower ($row ['password']))

  {

  $loged = true;

  }

  }

  If ($loged is true)

  echo "< status > true < / status >.

  else

  echo "< status > true < / status >.

  ? >

  Flex application named login.mxml

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="vertical"verticalAlign ="middle"> "

  
  

  < mx:Script >

  <![ CDATA [ ]

  import mx.rpc.events.ResultEvent;

  import mx.controls.Alert;

  private void logintest (): void { }

  loginService.send ();

  }

  private void onResult(e:ResultEvent):void { }

  If (e.result.status is true)

  Alert.show ("login successful", "Success");

  else

  Alert.show ("failedl Login", "Failure");

  }

  ]]>

  < / mx:Script >

  
  

  < mx:HTTPService id = "loginService" url = "D:\Flex workspace\wamp\ www\myTest.php" method = "post" result = "onResult (event)" >

  < mx:request xmlns = "" >

  < user > {userEdit.text} < / user >

  < pass > {passEdit.text} < / pass >

  < / mx:request >

  < / mx:HTTPService >

  
  

  < mx:Panel title = "LogIn" >

  < mx:VBox >

  < mx:HBox >

  < text mx:Label = 'user' / >

  < mx:TextInput id = 'userEdit' / >

  < / mx:HBox >

  < mx:HBox >

  < mx:Label text = "pass" / >

  < mx:TextInput id = "passEdit" / >

  < / mx:HBox >

  < mx:Button label = "login" click = "logintest ()" / >

  < / mx:VBox >

  < / mx:Panel >

  < / mx:Application >

  Maybe I have to put myTest.php file elsewhere?
  Help, please

  alcaponis wrote:

  with this... I saw in the tutorial when you run a php file, it replaces the 'veikia' password and you can see that your php file works, but it doesn't change anything in my database...

  Maybe there is something wrong with my browser or something? I have never done that before, so maybe I need to change something in Explorer? Or something?

  Yes basically your old PHP file would change the user 'Admin' password "veikia" whenever he was executed. I don't really understand the point of this!

  Anyway, tell me exactly what you want this program to do, and I'll try to help

• Sansa Clip - stuck on the refresh database... I don't know how go you to the SMC is stuck on the refresh database...

  Hey guys,.

  I had to look around the forum without result...

  Have a new Sansa Clib 4 GB... Spend 2 hours sorting of a list of synchronization... (Who has no record on a playlist... )

  Put on I "Refresh database" at about 20%, which is frozen right there...

  I've read about the opening in MSC? to find the bad file which is the cause (correct me if I'm wrong)

  But can't figure out how to do something that he is stuck on the refresh database...

  Through 60 GB of music earlier and really don't want what should once again!

  Please help, not very good techno animal

  Thank you

  PAM

  Go into the menu settings of clips and then use the system settings internal to format the drive (sorry it will delete all the music on the player). Once that is completed, make sure that you have the latest firmwire. Then download mp3tag (google it) and use it to check the tags of all your files, make sure that they are all Id3 tags, and that there is no mistake on any of them (sorry, this can take some time). Then, make sure that the clip is in MSC mode. Then use windows Explorer to drag and drop the files you want onto the clip on the clip. Disconnect and then turn it on. Leave it to update the database (do not touch anything). If you have music you know to be protected DRM you will need to plug the "rocket" back in and use Windows Media or any other similar program to add these files. I hope this gets you going.

• Laptop has virus and still unable to connect to the Web site after his withdrawal.

  Original title: laptop cannot connect to router

  my daughter portable computer had bankerfoxa virus I think that I got rid of but she still can't connect on the website I want to download microsoft security essential on his cell phone how if I can not connect? pls help

  Hi trinidadg,.

  Also try the following steps, you have a problem connecting to the Web sites.

  Try to do a System Restore to an earlier date when your computer was working well and try to run a scan for malware removal.

  Try to reset the Proxy settings to connect to the internet, as some malware enable proxy settings that block your ability to browse Internet sites.

  To reset the Proxy settings:

  Click Start-> in "search programs and files" type CMD-> in the programs in the list right click CMD and click 'run as administrator '.

  In the command prompt, type the following and press ENTER:

  NETSH WINHTTP RESET PROXY

  Restart the computer

  Touhami

• I don't know how to connect as an administrator windows 7 ultimate

  just bought this computer and have tried to add gadgets and it tells me that I need an administrator to do that.i can't change settings and customize my own computer.help please

  Is your current account, an administrator account?

• HP officejet 6500 has more: press the button doesn't work is not on the right side

  Hi I tried to turn on my printer and it is stuck on maintenance mode and will not work my right from the touch pad is there a replacement for the touchpad or a way around the mainenance mode?

  Hello @jgrier1,

  Welcome to the forums of HP.

  I understand that your printer is stuck on maintenance mode and the touchpad is not responding.

  I would like to help.

  I'm sorry, but the display on the Officejet 6500 has more, is not a replaceable part by the user.

  Try to go through the document next to the touch screen.

  It also can you go beyond the question of maintenance mode.

  The touch screen is unresponsive

• Recently bought an iPad 2 and I would use my officejet 6500 709n but don't know how?

  Recently bought an iPad 2 and I would use my officejet 6500 709n but don't know how?

  got the HP iprint app but don't have a lot of features except for photography pictures.

  Y at - it info to expand the services?

  Your printer does not support the built-in iPad AirPrint.  You can print with third as HP iPrint printing applications, but you can print is somewhat limited.

• I just signed up for offers on request.  I received on my iMac, but don't know how to get it on my Apple TV.  Can someone advise?

  Can someone advise me on how get Opera met at the request of my computer to Apple TV?  I have Netflix and many other sources which works very well.  I can receive puts it on demand on my computer programs but I don't know how to connect to Apple TV.  I'm sure it's simple, but I am at a loss.  Help would be very appreciated.

  You need reflect your Mac. Use Native requires a Mac OSX 2011 10.8 or later running or later version. The alternative is to use a program like Airparrot. If you have a 4th gen ATV and app is available, then there is also the option to install it directly.

• Windows vista and playstation 3 - I do not know how to get my PlayStation 3 appears on my network and I don't know how to enable file sharing

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Less error have a playstation 3 and windows vista. I have a combination of problems aggravated by not being not very Internet / computer savvy. The issue is around file sharing and lower my firewall. I don't know how to get my playstation 3 appears on my network and I don't know how to enable file sharing. at one point, the RAD icon appeared and without changing anything, he disappeared. I can follow the simple instructions but my absence I have a playstation 3 and windows vista. I have a combination of problems aggravated by not being not very Internet / computer savvy. The issue is around file sharing and lower my firewall. I don't know how to get my playstation 3 appears on my network and I don't know how to enable file sharing. at one point, the RAD icon appeared and without changing anything, he disappeared. I can follow simple instructions, but my lack of expertise is really crippling my ability to do for himself. I tried to lower my firewall (not sure if I did) but I need to be walked up to the baby step by baby stepof expertise is really crippling my ability to do for himself. I tried to lower my firewall (not sure if I did) but I need to be crossed self-study baby baby
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Google comes up with these:
  http://www.ehow.com/how_5074747_network-PlayStation-computer.html
  http://www.ehow.com/how_2216306_add-PlayStation-3-LAN.html
  http://www.Google.com/search?q=network+a+PlayStation+and+a+home+computer&start=10&hl=en&SA=N&RLS=com.Microsoft: en - us & prmd = ivns & to source = univ & to TBS = vid:1 & to tbo = u & ei = PrtKTanFLMmCgAfjscnVDw & to oi = video_result_group & to ct = title & to resnum = 10 & ved = 0CGoQqwQwCTgK
  http://www.absolute-PlayStation.com/PlayStation-Network/expert-PlayStation-3-hardware-accessory-help-PlayStation3-PS3-console/10631-PlayStation-3-wireless-connection-setup.html Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• How to print from my ipad to the officejet 6500 has more?

  I read that there may be something else than necessary. I want to print directly to the Officejet 6500 has more. Apple said ths is an Air Print printer able to do this. I don't take this monster out of the box until I know he will do what I want without a lot of trouble. Thank you.

  OK, so you were talking about requiring the update.  It is difficult to say that all depends on if it came with the new firmware or not.  It is not really relevant, however, because it will be updated as soon as Web Services.  This process takes a few minutes.  There is no computer necessary for the update of the firmware as long as the printer has internet access (which is directly connected to a router via ethernet or wireless).  Yes, a connection ad hoc, you will be able to print from the iPad, but you can use its 3 G connection instead of through your router.  It can only support a single WiFi also.  Go ahead and set up the printer and keep me posted on what happens.

  BTW - what is the problem with your PC that it cannot access the internet?

• HP officejet 6500 has more poster "original jam". There are no jams, how do I clear the message?

  HP Officejet 6500 has more poster "original jam.  Clear the jam, and then press 'OK' to continue. "There is no paper jam and the printer will print as long you don't try to use the automatic charger.  However, the error message continues interfering with scanning and other print jobs.  Any ideas on how to clear the error message?  I tried to reset, nothing helps.

  Thank you.

  Hello HPAllinOneSande,

  Perhaps there is a jam that is located somewhere on the printer. See if you can follow these steps to clean the error and the jam.

  ' Original jam: clear jam and press OK "Message displays on the all-in-one