Imply aging report - error

Similar Questions

• Unable to connect error headset/Bluetooth Headset: the pairing attempt failed in an unknown error, is the reported error code: 0x80070005

  Original title: Bluetooth headset not connecting

  I have a Plantronics 9xxBackBeat headset, and I'm trying to connect my laptop (HP Pavilion dv6000)

  However, when pairing the headset I gives me the message
  "Device pairing failed.
  Matching attempt failed in an unknown error, is the reported error code: 0x80070005
  Contact the manufacturer of your device. »
  However, there is no driver for the 9xxBackBeat headphones and when I contacted their support, I'm referred my OS manufacturer, but when I talk about Microsoft, they tell me to go to Plantronics.
  Can someone tell me please how to fix this error?
  If it is not a mistake on the side of Plantronic, and if it's not a mistake on the side of Microsoft Windows, and then what happens?

  Hello

  1. are you able to connect other devices via Bluetooth from your computer?

  2 - is this compatible with your operating system device?

  First thing I suggest you to check the manual and if this device is compatible with your operating system.

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: The problems with Bluetooth devices: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 2: If the problem persists, then try to update driver:

  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select Bluetooth peripheral device and right click on it.
  d. now, select Update.
  e. restart your computer.

  Method 3: Also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.

  Set up a Bluetooth device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-a-Bluetooth-enabled-device

  Hope this information is useful.

• Technicians in people call Microsoft to fix computer reported errors?

  * Original title: error reports

  Technicians in people call Microsoft to fix computer reported errors?

  Hello

  Thank you for visiting Microsoft Community.

  I suggest you refer to the suggestion of Kosh Vorlon responded on 14 April 2012 from the link below and check if this is useful:

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_scanning/phone-call-scams-claiming-to-be-Microsoft/aefc50a4-d7a4-4c79-8db5-2fafcd6ad196

  Hope this information helps.

  Meet us with the State of the question.

• Unable to see Report.trace and Report.error newspapers

  Hi all

  I tried to implement the Report.trace and Report.error check in one of my component, I'm able to see it in the active Sections but its not out there tracking logs display.

  Here's the code I used.

  at the entrance of the file:

  Resource definition:

  resources

  Resources/ampffacontentpublishlistner_trace.htm

  ampffacontentpublishlistner_TracingSections

  10

  Merge rules:

  ampffacontentpublishlistner_TracingSections

  IdcTracingSections

  itsSection

  10

  Def resource file:

  < html >

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 ">"

  < title >

  ampffacontentpublishlistner staticResTable

  < /title >

  < / head >

  < body >

  < ampffacontentpublishlistner_TracingSections @table @ >

  < table border = 1 > < legend > < strong ampffacontentpublishlistner_TracingSections > < / strong > < / legend >

  < b >

  itsSection < td > < table > < td > itsDescription < table > < td > < table > itsDefaultEnabled

  < /tr >

  < b >

  myfacacheclearlistener < td > < table > < td > < table > < td > < table > csTraceMyFACacheClearComponent

  < /tr >

  < /table >

  < @end @ >

  < / body >

  < / html >

  Java code:

  public static String m_strCompTraceSection = "myfacacheclear";

  Report.trace (m_strCompTraceSection, "seizure doFilter" null ");

  Please let me know if any changes need to be made

  Thank you

  Veillon

  I see different section/follow-up in you name are java code and the name of track section configured.

  myfacacheclearlistenercsTraceMyFACacheClearComponent

  public static String m_strCompTraceSection = " " myfacacheclear ";

  Report.trace (m_strCompTraceSection, "seizure doFilter" null ");

  value of the m_strCompTraceSection variable must be = ""myfacacheclearlistener "."

  
  

  You can also check by adding / activating manually ""myfacacheclear "which is in the list of the section."

  
  

  Thank you

  Vikram
  

• PLS-00201: identifier ' FND_GLOBAL. User_id' must be reported error

  Hello!
  
  I use 10g DB (like my access system), EBS 11.5.1
  I created a trigger (before_update) with the line
  : new.last_update_by: = fnd_global.user_id;
  but get the error PLS-00201: identifier ' FND_GLOBAL. User_id' must be reported error.
  
  Please help out me.
  Elmer

  It's been a while since I've done the triggers with the E-Business Suite, but it might be a requirement to have the trigger in applications rather than your custom schema schema. The apps schema should have full access to your custom schema (which he would get if the schema is correctly registered by using the form).

  And the other question, I would ask why you need it... Why don't your custom code to do this update systematically. You should also read Thomas Kyte stuff on the triggers.... (asktom.oracle.com, search for triggers).

  Best regards, Ivan

• When I try to attach files in hotmail, I get a message that silverlight plugin crashed and error report error on plugin - container.exe. I have the latest silverlight plugin. What should do?

  • I work on windows XP

  I have latest fire fox and silver light plugin

  • 'Silver plugin light crashed', that's what I get when I try to attach files in hotmail
  • error report on plugin - container.exe.
  • where to find the plugin - container.exe. to install and try

  Hello

  Please also try to disable the Silverlight Add-on in Tools (Alt + T) > Add-on > Plugins before you open Hotmail. You may still be able to attach files.

• Apple Hardware Test reports error message

  If you want history, scroll to the bottom. Here's the short version: Apple Hardware Test indicates error 4SNS/1/40000001:VeAS-0.000

  This page handy tells my that '4SNS' = a sensor problem. 'V' indicates that it is a voltage sensor; and 'e' is short for PCIe. There is nothing on AS - 0, 000 but I'll allow myself that it could indicate the location PCIe 0, i.e. the bottom, 16 channels gpu 'main' slot. If anyone can confirm or correct this assumption, that would be sweet.

  Most important: how serious a mistake it is? I have a Radeon HD 7970 GHz 3 GB edition. I'm he put at risk by continuing to use it? I plan to play a lot more, some on El Capitan, but more on Windows, where I can experiment with overclocking my already factory overclocked GPU. It doesn't seem to be a problem in terms of overclocking software is. Reports of tension, times and speeds of fan exactly as expected.

  And the main reason I upgraded from my great MacPro1 OG, 1 to a 4.1 is because I intend to upgrade GHz W3520 2.66 in the 4.1 to a 3.46 GHz W3690. With the upgrade of the processor, I had planned to keep this box for several years. This error indicates that this particular Mac Pro is less great, or maybe even a lemon?

  The seller is apologetic and will accept a return. Which will cost me $40. I would stay there or is it really not a problem. It was really a lot...

  As you stock up on for Apple hardware Test error messages are very cryptic and not really documented.

  I don't know of anyway to know if it's a "fatal" flaw

• Report error LabSQL SQL database

  Hi all, I want to ask about the error of LabSQL report, I made I followed machine 12-in-1 program to program, I did SQL database by LabSQL freeware

  in this case the database can function properly,

  

  Look on the date of database, he made 5 ranks (each plot 1 hour data), so it only 5 hour running program, the connection on LabSQL has an error like this report:

  

  What is the problem? Please explain to me what the problem is. help me fix my program, I'll set my program,

  on this case, I use only LabSQL because we have a lot of money to buy database connectivity kit, please help

  If you look at the description of the error, it is said there are "too many client tasks - how many SQL references that you opened earlier. You try to write to the database from several places by opening and closing the reference every time?

• PCI-1588 fails the self-test and reports error-50550

  I install the drivers for my card NI PCI-1588 and I get the following error:

  The device of that test has failed. From the device driver error report is as follows:

  Error-50550 occurred at the self-test

  Now, I normally don't get angry when I see a mistake, but when the error code is undocumented I said, why?

  In any case, my event viewer says:

  LabVIEW information: error: 400 'Bad Request' for 'deletetree', file ' ': unsupported protocol.

  [nitsuu] [[NO-Sync]]  Fatal error:.\source\nitsu\service\tDriverInitializer.cpp:80 - an error is causing this device OR Sync to the failed to initialize, error-50550 code

  Has anyone else seen this error?

  I'll try to change the location in which my PCI card has been installed, but I would appreciate some debugging info.

  Thank you

  The self-test would occasionally fail my last update... after reinstallation of windows and the only solution I've found that never fails is to go to Device Manager, uninstall the device from there (do not delete the source files for the driver), and then rescan immediately a new material.

  Then it would work in data acquisition!

• 6 open/create/replace the file in NI_Excel.lvclass:Save report error to

  I have an application that works on LV60 and when lance in LV86 I get the following error: error 6 took place in open/create/replace file in NI_Excel.lvclassave report to the File.vi-> SWF001 Test.vi Possible reason (s): LabVIEW: file generic i/o error. = OR-488: IO operation abandoned. C:\SWF001 IO Files\1_Single.xls the application made: New Report.vi Excel get Worksheet.vi Excel easy Table.vi Excel easy Text.vi (4 of them) save the report to the File.vi Report.vi to throw all in a nice string (errors and report-in/out) as is typical for some reason any I get this error message. I use it with Excel 2003 SP3 and the spreadsheet contains macros (and I get a prompt ' should I enable macros: "(Yes), I do not have with LV60 and the old version of Excel). This is probably not the problem? but deserves to be mentioned. The file exists on the system (and it seems that the application is to write on it with success - but maybe truncated as the error indicates-i cannot say with certainty). I can open and save the Excel file independently LV very well. Clues? Thank you very much! -David

  
  

• age of error torrent empires 3

  Please help me! I downloaded age of empires3 torrent and when I runAGE3Y. EXE, he is in error message not found in granny2.dll. entry point now, I have to do? Please post the answer as to my gmail account,* address email is removed from the privacy *

  No wonder with an illegal copy.  Who knows what else can now be downloaded to your computer.

  -Hope this helps.

  Doug Robbins - Word MVP,
  DKR [atsymbol] MVP [dot] org
  Posted by the community bridge

  "empire praveen" wrote in the new message: * e-mail address is removed from the privacy... *

  Please help me! I downloaded age of empires3 torrent and when I run/AGE3Y. EXE /, is giving the error message that /entry point not found in granny2.dll. / now what do I do? Please post the answer as to my gmail account, /* address email is removed from the privacy */.

  Doug Robbins - dkr [atsymbol] Word MVP MVP [dot] org

• report error pop up game stops from time to time.

  My son is at the moment play star wars battle ground, in it keeps get an error report will appear if l have a right click my computer, properties, advanced and disabled reporting of error in there but now we do not get the error report popup the game always stops and returns to the top of the desktop, can you please help thanks.

  --------------

• Time of executable problem - continue to send reports error but not received a solution.

  Window appears with the title of executable time problem - send error report.   Have done more than 50 times.  See no.

  answer or difficulty.

  Hello ArtRequate,

  Please look at the suggestions in this thread for possible solution. The largest part of the problem seems to deal with printers.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/7be27770-8122-4620-a793-5611de55c622

  Please let us know if that helps.

  Marilyn

• AVG Free anti-virus analysis reports errors potentially dangerous following rootkit

  AVG anti-virus free the following errors of potentially dangerous rootkit analysis reports - ' ";" C:\WINDOWS\system32\drivers\sppz.sys «;» ATAPI.sys, Hung import HAL.dll READ_PORT_USHORT-> sppz.sys + 0x20C0"; "' Object is hidden" ' ";" C:\WINDOWS\system32\drivers\sppz.sys «;» ATAPI.sys, Hung import HAL.dll WRITE_PORT_BUFFER_USHORT-> sppz.sys + 0x2800"; "' Object is hidden" ' ";" C:\WINDOWS\system32\drivers\sppz.sys «;» ATAPI.sys, Hung import HAL.dll WRITE_PORT_UCHAR-> sppz.sys + 0x26D6"; "' Object is hidden" ' ";" ' C:\WINDOWS\system32\drivers\sppz.sys ';' i8042prt.sys, Hung import HAL.dll READ_PORT_UCHAR-> sppz.sys + 0x11B90; "' Object is hidden.  Is this a false positive, or should I remove these rootkits?  If so, how?  These have been reported after that I installed the Windows updates on June 14, 2012.

  You need to scan with a program SPECIALLY designed to detect and remove rootkits (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm
  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.
  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

• How to report errors in Windows 8. Example: Data transfer freezes.

  How errors in the operating system Windows 8 Customer Preview can be reported to Microsoft?

  For example: when I transfer data from an external desktop USB hard drive, when it reaches 99% it freezes for 50 seconds.  It is independently the size of data from a few KBs to the top.

  There is a work around.   If the Panel of Navigation is active in the view for Windows Explorer, data transfers normally and are slightly faster than Win7 on the same machine.

  However, this is not normal.  Windows 7 has the transfer rate even if the Navigation pane is enabled or not in Windows Explorer.

  I would like to be able to report to Microsoft so that they can fix this error.  Any suggestions?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Performance?tab=unanswered

  This is the forum for windows 8.