Import my own device from the host data store

Similar Questions

• Disconnect from the storage data store

  We have two datacenters (Server Vcenter linked mode) - A & B

  Site servers A and B are replicated via san (at the end of storage no SRM)

  Note - what is the known issue in environmental - issues of SAN - every day there are stores in the event of disconnection from the storage data. (Question is 4 months old now). in the Windows Server performance issues.

  For the recommended HP fix update the firmwares of controller on both sites (3 HP EVA controllers) which has been successfully complete however problem has not been resolved.

  There are a lot of outages caused by the problem of storage in the environment. As an example under Server is unresponsive due to the store being disconnected from data storage.

  

  Vmkernal newspapers indicates that it will fail on the physical path

  

  Note storage array - is active active and political path for host ESX is alternating

  What measures can be taken to correct the problem?

  Thank you

  Deepak Negi

  VCP4, VCP5

  What about port enc on connected to EVA in SAN switches? You have CRC errors and if so, whether the counter has increased? Reset the counter if necessary so that you can monitor it.

  What, EVA connect? Any excessive number of links and housing check the errors of State?

• Possible to deploy the OVF model directly from the local data store?

  Hey all,.

  I'm trying to optimize the consumption of resources and the speed of deployment of models of the FVO in ESXi 4.  Of course, the fastest and most effective way to do so would be to have the models of the FVO in a data store and deploy them directly to another (two stores on the same host).  That's what I'm trying to accomplish.

  Problem seems to be that when you use the vSphere client to deploy templates of the FVO, even when you point to the URL of the model on the same host (via http to the data store access) system, the vSphere client again retrieves the ESXi host files, then transfer their return.  So using twice the bandwidth on the host and the client system necessary.

  Does anyone know if it is possible to perform the deployment of a model of the FVO keeping all internal transfer to the ESXi host?  If anyone knows another method more effective than what I'm trying to achieve, I'm open to suggestions.

  All advice is appreciated.

  Thank you!

  -Ben

  The only way I can see that you can keep the internal traffic to the ESX host would be to have the vSphere client in a virtual machine running on the host computer, and configure your internal network Ms keep all traffic to the host

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• remove the Cluster data store data store

  I have an infrastructure with vCenter and ESXi 4 5.5 I have a data cluster store in SAN with 8 Mon, I need to remove 3 Lun (to be used for other purposes) what is the appropriate procedure

  to remove the Lun (end then to destroy)? Thank you

  Do you want the LUN to use for purpose of non-vSphere? If so, you can just storage vMotion virtual machines since associated LUN data warehouses that you want to decommission (or simply putting the data store in maintenance mode, in this way, that the virtual machines will automatically be migrated). Cleaning after the data store, move the data store from the cluster data store, and then delete the VMware environment data store as described here: best practices: how to properly remove a unit number logic of a host ESX - VMware vSphere Blog - VMware Blogs

• Display of the VM in the incorrect data store

  Hello

  I have 4 data warehouses and I've migrated a few VM data (DS) to another store, but when I discovered the 'data warehouses' in client VI still the virtual machine appears in the list on the old data store.

  I have traveled the old DS and I can confirm no there are the virtual machine and the .vmx file points to the new location in the settings of the virtual machine, so why the virtual machine appears in the list of the old (source) DS?

  Do you have something (for example ISO) attached to the virtual machine that may still reside on the old data store?

  Review the vmx file (downloadable from the browser data store) and check that there is no reference to the old data store.

  André

• Store of data deleted from the host, always present in vCenter?

  I had some performance issues with my iSCSI connection on my QNAP SAN, so I decided to go NFS instead. Much better now, but the old store of iSCSI ("store 1") data is still present in vCenter, even though I removed from the host.

  I do not know I did something wrong, but what can I do about it?

  Your virtual machine has snapshots active and/or .iso or .flp mapped images to their readers of disc-CD-ROM CD / floppy drive virtual, that were on the old data store?

  André

• Add the host Cluster in the Cluster data store

  How can I add host/HostCluster in the Cluster data store after the cluster data store is created. I know that we can add at this time, when you create the cluster data store, but how can we add it as soon as it is created?

  I think that as long as the new host has access to all the LUNS that comprise data warehouses in the cluster data store, then no further action is necessary.

  Make sure just that if using CF then zoning is configured correctly and the LUNS are not hidden from the new host.

  Also, make sure you restart the analysis for new data warehouses on your new host so that it can detect data warehouses

• Mounting external USB HDD to host copy all the s vm to the local data store

  I have a scripted ESXi installation that works very well, but once the installation is completed I want to copy all the VM from a disk external DRIVE to store data on the host computer.

  There is no attached servers/clients, so it must be done from the host itself.

  in thele/var/log/usb.log file on the hard drive is recognized, but how to access and copy all the external HARD disc VM in the data store?

  install vmware tools

  _________________________________
  Good luck!

• Copy a file in VMware machine from the host (for the guest OS) operating system

  Hello

  I need to migrate data in

  guest operating system of the host OS via

  VMware.

  The client runs as a virtual machine in VMware

  that is run from the host operating system.

  Anyone know of a way to do it?

  Thank you

  Stuart

  smcracraft wrote:

  I need to migrate data in the operating system of the host operating system through VMware.

  The client runs as a virtual machine in VMware that runs from the host operating system.

  Anyone know of a way to do it?

  First VMware is a company not a product and you didn't say what VMware product you use no you said what OS is on the host or the guest then I suggest you read the VMware product documentation that you are using.  In general, if the Virtual Machine works in the same way a physical Machine so you can do the same between the host and guest in dealing with clients as if it were a physical Machine.

  If you have VMware Tools installed in the comments you can also take advantage of VMware shared folders and or the functionality of Drag and Drop on pris supported operating systems.

  BTW take a look on: HOWTO: ask (and answer) Questions

• With a binding high-speed small (1.3 MB) and living in a multi storage House, is it a lot to win add a device from the airport to the BT router?

  We have a high link flow modest (1 to 3 Mbit/s) and a several-storey house.

  My iMac will work faster Safari if I add a device from the airport to the BT router?

  My iMac will work faster Safari if I add a device from the airport to the BT router?

  No, because the speed of your Internet connection is controlled by your provider, BT, if you need a faster Internet connection, you will need to talk to BT one faster... and more expensive... plan connection.

• I follow from the same date over and over again. And it updates successfully whenever I sign in my computer.

  I follow from the same date over and over again.  And it updates successfully whenever I sign in my computer.   Or I can click on windows update and update the same thing again.  Some miuutes or a fews seconds it will say I need to update my computer again.  I updated the same 25 times.  How can I stop this.

  Hello

  I suggest you follow the steps in the link below and check if it helps:

  http://support.Microsoft.com/kb/910339

  It will be useful.

• email problem - "mail from the host cannot be found.

  Problem title: original email.

  Why I have problems with my email migration to Windows Mail? I get an error message stating my "mail from the host cannot be found. This has happened on and off for the last 2 weeks. It also affects my laptop. He does not seem to fix his car, then back again. Have you any idea what may be causing this.

  The host (server) mail.btinternet.com is alive and well. It must have been a temporary problem. Let us know if this problem persists.

   

  Gary van, Microsoft MVP (Mail)

  ------------------------------------------------------

   

  "Gerry Pike" wrote in the new message: * e-mail address is removed from the privacy... *

   

  My e-mails light up Windows Internet Explorer. When I open Windows Mail, automatically migrate through and be able to be opened, read and responded to. I did this since I've been using Vista - about 2 years and more. It is strange that he should start suddenly that past not only with my PC, but also my laptop. I did not any changes to settings to one of my computers. The situation does not erase, but he continues to reappear - as the last 2 days! Even my ISP - BT - could not find a solution! The message I get is a follows.

   

  The host 'mail.btinternet.com' is not found. Please check that you have entered the server name correctly.

  Account: 'mail.btinternet.com', server: 'mail.btinternet.com', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0Dppear.

   

  Gary van, Microsoft MVP (Mail)

• How can I restore my photos/docs from the Dell Data Safe emergency backup file?

  incompatibility with estensions file DSB

  Files saved during the backup secure files DAT Dell are the extensions of file .dsb by the Dell site. Windows 7 does not open the files to restore on reg location Windows Media as before the backup. .Dsb error message unrecognized files. How can I restore my photos/docs from the Dell Data Safe emergency backup file?

  I know that you need a Dell utility for this...

  And what has this to do with Windows 7 photos and videos, I really don't know...

• show only five dates Monday from the current date.

  All,

  I have the column date in dd/mm/yyyy format, I need to show the rear 5 date of Monday, from the current date.

  in the warehouse we t have the column NAME OF THE DAY.

  Help me.

  
  

  Thank you

  
  

  CASE WHEN DAYOFWEEK (DATE_FIELD) = 2

  AND

  DATE_FIELD > TIMESTAMPADD (SQL_TSI_DAY-35, CURRENT_DATE)

  AND DATE_FIELD<>

  THEN

  DATE_FIELD

  END

  Please check and change-35, according to the needs.

  Please check if it is correct.

• "No 3d support is available from the host"

  Program: Job 12

  Operationg System: windows 7 Professional K service pack1

  Graphics card: GeForce 9600 M GS

  
  I saw the message 'no 3d support is available from the host'

  I don't know this solution.

  I need your help.

  How can I solve this problem?

  You can specify... is your operating system Windows 7, or you are running WIndows 7 in a VM on something else?

  Make sure you have the latest video drivers.

  If you use windows, make sure that hardware acceleration is turned on.

  If you see no problem and everything works, then ignore it.