import of HVCHD speed in Prieemere pro cs6?

Similar Questions

• Could not import the flv file in first Pro CS6

  Hello

  I just tried to import into prime Pro CS6 but I get:

  "The file has a compression type not supported."

  I saw a post on a forum where someone changed the extension .avi and it worked for them.  Is not for me.

  I saw another post on this forum for Media Encoder allows you to change the file type.  When I try to import into Media Encoder I get "the compression of source type is not supported."

  We use a webcam to record and wants to do the FLV format because if the computer dies, he saves the file at this point where other formats is not the person who made the recording (at least this is what he told me).

  Any suggestions are welcome.

  Suz

  Covert with Handbrake:

  Convert with the brake hand

• Import of images classified to Premiere Pro CS6

  I'm trying to correct/color grade my clips. I sent it to Speedgrade by Premiere Pro (CS6) but after having rendered out as a DPX, and try resending to Premiere Pro (DPX image sequence), not all of the classified clips were there. (Clip is 04:40 min) but only 01:39 min is what was imported back to Premiere Pro.

  I found occasionally that I tried to export and don't take that dialog box export thought I have tried only to export something highlighted, or if another setting for "selected area. I think you have run against something similar... or a box that has been verified that don't is not yet aware was there. As I try (for the first time in a year) export an EDL from PrPro to Sg I had to decipher something like three different places, both programs have tried to help me before I could get the EDL breath and images both imported in the same timeline of Sg.

  As an alternative to DPX it is of course two different EDL processes... one where you export just a NOD and then after you have created your Sg project, go to the via media of the Sg Panel, drag it to the timeline, then the media group to navigate to the folder containing your clips, and then use the 'load from desktop' option to fill your timeline.

  The others... export you the EDL and the order of the timeline and then put one on the new calendar of the Sg project, drag one on top. It takes a little more time to make the export of PrPro of images that are probably not necessary most of the time.

  I have just set up the Forum an explanation how to do that with progressive pictures and avoid the hiccups, both programs can throw at you. The first of... If all your media in one folder-tree... is very fast & easy. EDL export is almost instantaneous, and clips of top loading just bango... now, I used to have problems to export by moments (made) a chronology of Sg. I don't know if an EDL process can work sending back to PrPro ranking, I think you would have to return on. But a lot of people who have done all the time without problems.

  Neil

• Premiere Pro CS6 importing .mp4 = "the file have no audio or video streams."

  Hello

  When I import a clip in Adobe Premiere Pro CS6 MP4, I get the following message:

  "Failure to import a file.

  151_0010_01.MP4

  Error message

  The file has no audio or video streams. »

  I have the latest Quicktime, and I reinstalled Premiere Pro CS6 several times already.  If someone knows a solution for this, I'd be very happy.  Below are my system info and the clamp.  Thank you, Robert.

  Operating system

  Win 7 Ultimate 64 bit

  CLIP INFORMATION

  Full name \BPAV\CLPR\151_0009_01\151_0009_01.MP4

  Format: MPEG-4

  Operating name: XDCAM EX 35

  Format profile: Base Media / Version 2

  Codec ID: mp42

  File size: 1.76 Gio

  Duration: 7 min. 5 sec.

  Overall bit rate mode: Variable

  Overall bit rate: 35.6 Mbps

  Encoding date: UTC 2009-07-19 04:22:10

  Marking date: UTC 2009-07-19 04:22:10

  Video

  ID                                       : 1

  Format: MPEG Video

  Operating name: XDCAM EX 35

  Format version: Version 2

  Format profile: Main@High

  The format, BVOP settings: Yes

  Format settings, matrix: Custom

  Parameters of the format, GOP: M = 3, N = 15

  Codec ID                                 : 61

  Duration: 7 min. 5 sec.

  Bit rate mode: Variable

  Bitrate: 34.0 Mbps

  Maximum bit rate: 35.0 Mbps

  Width: 1 280 pixels

  Height: 720 pixels

  View picture format: 16:9

  Frame rate mode: Constant

  Frame rate: 29.970 fps

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  Compression mode: lossy

  /(pixel*Frame) bits: 1.231

  Stream size: 1.68 Gio (96%)

  Language: English

  Encoding date: UTC 2009-07-19 04:22:10

  Marking date: UTC 2009-07-19 04:22:10

  Primaries: BT.709

  Transfer characteristics: BT.709

  The matrix coefficients: BT.709

  Audio

  ID                                       : 2

  Format                                   : PCM

  Parameters of the format, "endianness": Big

  Format settings, sign: signed

  Codec ID: two

  Duration: 7 min. 5 sec.

  Bit rate mode: Constant

  Flow: 1 536 Kbps

  Channels: 2 channels

  Sampling: 48.0 KHz

  Color depth: 16 bit

  Stream size: 77.9 MiB (4%)

  Language: English

  Encoding date: UTC 2009-07-19 04:22:10

  Marking date: UTC 2009-07-19 04:22:10

  DELETE files inside "Media Cache files" and "hide media".

• Canon XC10 MXF file import failure first Pro CS6

  Does anyone know why can't import video MXF files from the Canon XC10 to first Pro CS6?  I searched for a process / workflow that does not include having to use an mxf converter.  I looked at a number of different suggestions on the web.  I read the following article http://www.adobe.com/content/dam/Adobe/en/products/premiere/cs6/pdfs/adobe-premiere-pro-cs 6-canon-workflow - guide.pdf which indicates it should not be a problem with the import mxf to the first pro cs6.  I also used the Canon XF Utility - once again unfortunately, I still got the message "the importer reported a generic error.  Other Adobe applications, faced with this format include Prelude and Media Encoder.

  I'm on Windows 10.  I hope that someone in the community will have technical knowledge to help.  Or maybe even staff Adobe might be able to offer suggestions.  Thank you.

  If you download the Canon XF Utility software,

  You load the map and export in MXF format (that's all) on the hard disk.

  Import in first. That's all.

  XF100 - Canon Nederland

  Sorry can't find a page in English, but the softeware is available in different languages

• I could leave Media Composer of Avid to Adobe first Pro CS6.   Here are some of the questions: 1. With Adobe first Pro CS6, would I be able to import images from my Canon G30 video camera WITHOUT transcoding?  2-. I would be able to pay and get the fo

  1-. With Adobe first Pro CS6, would I be able to import images from my Canon G30 video camera WITHOUT transcoding?  2-. I would be able to pay and get phone assistance from Adobe?  3-. I would be able to create DVD or disc Blu Ray in stereo or surround sound?   4-.  I have a collection of software from NewBlue.  He will work with the Prime Minister?  Thanks for the info.  Bert

  1. I don't know, but go to first import Formats html 0 http://help.adobe.com/en_US/premierepro/cs/using/WSd79b3ca3b623cac97fa024001235833a568-800

  2 - as far as I know, Adobe does not provide telephone support, only this forum

  3. you use the reminder grouped to create a DVD or BluRay http://forums.adobe.com/community/encore/content

  4 - If the plugin is specifically designed for PPro CS6, so ask the provider

• First pro cs6 not me already import a file

  First pro cs6 not me already import a .mov file. Cuando quiero import el archivo of me "el archivo no tiene audio or video flujos" still me de lo mismo. Sera por as esta a 60 frames por segundo? El proyecto no me already a poner mas 25, SER asi como puedo see? a very important job no puedo perderlo AYUDA!

  You have installed the latest Quicktime?

• Premiere Pro cs6 - video pane of the workspace remains empty when you try to view the imported files

  Hello

  I am currently working in Adobe Premiere Pro CS6. When I import my media into my workspace and drag it into the timeline, the preview area where you can review your cup video remains black. Double-click the imported file gives the same result. I was initially import files .jpg (about 300 KB of size for each) so I tried to import various other image formats - .png, .tiff, etc... I even imported a my scene movie file to determine if the problem was with my format of content. With video, the audio plays fine, but the video remains empty in the preview area. I tried rendering my workspace and change my initial parameters of the project, but to no avail. I went to my preferences for first and far as I know, everything seems fine.

  I use the software on a HP Pavilion, Windows 7 intel core i7, 8 GB of ram with a 2 GB of 650 M from nvidia card. Any help would be greatly appreciated. Thank you!

  Hello

  Have you tried to change your Video Renderer? It would be under the project > project settings > general. Switch option only the Mercury playback engine software and see if it helps.

  Thank you

  Regalo

• Any ideas? Premiere Pro CS6 crashing whenever I try to import clips!

  Hey everybody,

  I'm relatively new to Premiere Pro CS6 (gradually switching to Final Cut), so forgive me if there's any details miss me. I have real problems with getting the app to work, unfortunately.

  Here's the problem:

  I can create and save projects very well. Nothing is slow or appears bad. However, every time I want to import clips (in any parameter of project/sequence, or codec, as well as different types of clips from the camera), Premiere Pro instanty throws a message - immediately - to say:

  «I'm sorry, that a serious error has occurred which requires Adobe Premiere Pro stop.» We will try to save your current project".

  It is literally impossible around that, that I can tell. I tried all different types of clips, all the different import methods (for example drag / move, media browser, file > import), but nothing. It isn't even a matter of film - the same applies even if I just try to import images. Oddly, with grag and drop - method if it is a video clip, PP registers even how long the clip is, highlighting where the clip will insert - she normally would be - but then instantly crashes after abandonment and/or trying to read. This led to believe me (because I never saw a single visual image in Premiere Pro) there could be a graphic bug - potentially something wrong with my system.

  For any help or suggestion would be received with gratitude. I have attached to the report of crash below and some features of my system.

  See you soon,.

  Alastair

  MacBook Pro 15 "(Retina Display) - mid-2012"

  Intel Core i7 2.6GHz

  RAM 8 GB 1600 MHz DDR3

  OS X 10.8.2 (12 C 60)

  Intel HD 4000 512 MB graphics card

  Premiere Pro Version 6.0.2 (072 (MC: 264587))

  

  PS just Gunna do a full update of my Mac OS X to bring it up to 10.8.3. I doubt that this will fix the problem, but it's worth a shot, and if no bed I'll let you all know.

  Hey everyone just updated:

  I think I've solved the problem!

  No idea what it was, but it would either have been:

  (a) restart my MacBook (unlikely!)

  (b) update the firmware from Apple

  (c) update the Apple Retina Display update

  (d).. .the above all of that!

  He actually started to work before you go on 10.8.3, so not associated with OS X.

  In this case, my apologies for the long post - hope it helps everyone in the same situation in the future. Moral of the story: the Apple software update!

• Why Premiere Pro CS6 will only be important to the mpeg format?

  Hello, so I use Premiere Pro CS6 now for only a few months and when I imported (using "capture" or F5) and tested a few images a HDV camera using a miniDV Tape, I noticed that Premiere Pro would be to import the mpeg format. I looked up how to change this but couldn't find anything. So in short, I ask you if there is a way to change the import format so that whenever I have import from DV tape, it is not mpeg?

  Thank you!

  .. .footage of a HDV camera...
  .. .only import in mpeg format.

  Capture HDV will always be mpeg.

  whenever I have import from DV tape, it is not mpeg?

  DV capture will be (pc) .avi or .mov (mac).

  Note:

  Capture of a band, import a file based media.

  Capture and scanning

  In addition, what is the problem with mpeg?

  Why are what determined you to change?

• Help, please! Video type MTS have no audio after having imported the first Pro CS6

  The MTS files are used by SONY, Canon and Panosonic camcorders to store HD videos encoded with AVCHD.

  I can play these videos using Windows Media Player and the sound works fine. They also work in Windows Movie Maker. Why they do not work in first Pro CS6?

  As I went through this forum, it seems that I need to downgrade to CS5.5?

  After reading the forums, I found a very easy solution! And I don't take any credit for it.

  Download the software and convert AVCHD to WMV files without loss! Phew!

  http://www.shedworx.com/voltaichd

• Strange audio problem in Premiere Pro CS6

  Hello

  I encountered a very strange problem. I am changing a documentary film in Premiere Pro. All the material was shot on the Sony FS 100 camera - imported in PP with the media browser. In an interview, the last part of a clamp has corrupted audio. At some point on the timeline audio stops playing, and it looks like a scratch on a disc vinyl - two words that are repeated at the end of the clip (see screenshot of chronology). The images are as it should. When I open the clip of Avchd source in VLC the audio works. When I import the clip in Final Cut 7 using the Log and transfer the audio works. My only other option would be that there is a problem of software with Premiere Pro CS6. Any ideas how to solve this problem?

  

  PP version: 6.0.1

  Source of images: AVCHD, MPEG-4 (1080/25 p - Sony FS100)

  Mac version: OS x 10.8

  Model name: Mac Pro mid-2010

  Processor name: Intel Quad - Core Xeon

  Processor speed: 2.4 GHz

  Number of processors: 2

  Total number of cores: 8

  Memory: 20 GB

  Graphics card: NVIDIA GeForce GTX 570

  Third IO: Matrox MXO2 with Max

  Mercury playback engine: Mode of software

  A similar problem, potential, which can develop, is when the standard compliant process is interrupted before completing 100%.

  A quick way to exclude this possibility, would be to browse media Cache files and delete the CFA and the PEK (waveform display) for this Clip, outside of Premiere Pro. Then, when you launch PrPro and open your project, the program will recreate both of these files. There are a small progress bar, that many do not notice. Let him finish 100%, before even touching the computer. Test.

  I hope it's as simple as that.

  Good luck

  Hunt

• New MacBook Pro GPU compatible for playback in Premiere Pro CS6 Mercury engine?

  I am considering buying a new MacBook Pro (15 in., processor 2.8 GHz quad-core Intel Core i7, 16 MB of RAM) to mainly video edditing with Premiere Pro, I have the CS6 vertion. I wonder if its Mercury playback engine support GPU?

  The laptop I think uses this two graphics cards:

  • Intel Pro Iris graphics card
  • AMD Radeon R9 M370X with 2 GB of GDDR5 memory

  In the list of system requirements for first Pro CS 6; Premiere Pro system requirements for Mac OS and Windows is said "AMD over-pants" recommended for Mac and AMD Radeon GPU Acceleration (as the Mac comes with) is listed under Windows. This makes me wonder if the new Mac support the maximum speed for the Mercury playback engine?

  In any case, I would appreciate your views as oppon whitch GPU card you guys recommend for a MacBook Pro work best with Adobe Premiere Pro CS6?

  Hello

  Only these cards are supported for CS6

  • AMD Radeon HD 6750 M (only on some MacBook Pro computers running Mac OS X Lion (10.7.x) with a minimum of 1 GB of VRAM)
  • AMD Radeon HD 6770 M (only on some MacBook Pro computers running Mac OS X Lion (10.7.x) with a minimum of 1 GB of VRAM)

  Premiere Pro system requirements for Mac OS and Windows

  Vinay

• First Pro CS6-still images that grainy when the effects of movement applied

  I made a video in Premiere Pro CS6. The video, in part, still use images that I pan or zoom in on a Ken Burns effect. Although still images look good after having been imported, when the effects of movement are applied, they become suddenly very grainy and low quality.

  The images have been made - the bar above them is yellow - and I tried of many workarounds, including convert images in .psd and using the frame Hold.

  What should I do to fix this?

  maximum render quality verified?

• Missing/spoty audio in first pro cs6

  I'm using Premiere Pro CS6. When I import a file, it's missing audio in some parts only. I have double/triple checked that the file has audio in the first place. He plays very well in the windows 'Movies & TV' app. I tried to re import it several times. Nothing. I even tried a completely new project.

  Someone one has any ideas? I've included a screenshot in case someone needs to see. 12 seconds, about when the cursor is, is the missing part.

  

  Right now, I noticed that it's actually a loop audio even earlier in the clip. The empty place was too repeated a place where the microphone is not yet performed. I still have no idea why or how he did it, but somehow he did, probably during the import.

  I discovered a workaround if solution. Open the Tongs in hearing and record audio separately, and then just sync the audio with the video. A bit complicated but at least it works.