Impossible to activate the backup

Similar Questions

• Am on wifi and impossible to activate the backup in my new phone 6s.  Applications downloaded from my previous phone 5s which I still use.

  Using wifi, but a problem to activate the backup on my new 6s phone. Applications have been downloaded since my previous phone 5s which I still use. However I mistskenly deleted to the 6s phone backup.

  Hello

  Your iphone 5s uses ios 9.2

  Use the same apple ID on the new iphone email address.

  See you soon

  See you soon

  Brian

• Impossible to activate the backup on my iPhone

  I spent 3 hours with Apple staff, and I have not made any progress.  I am trying to back up an iPhone 5 to iCloud.  Under settings > iCloud > Backup, it indicates "Off".  iCloud backup/switch button is grayed out and cannot be turned on.  If I connect the phone to my office and try backup via iTunes, he tells be that the administrator has disabled iCloud backup on the device.

  At the instruction of Apple that I updated the software to 10.0.2 on the phone, I updated iTunes to the latest version.  I signed outgoing/incoming my iCloud account, find my phone, etc. twice already and I backup the phone on my desk twice and I've synced the phone twice.

  Any ideas how to switch backup to the phone or what it prevents active?

  Note all actions already tried.

  Thank you!

  parks34 wrote:

  If I connect the phone to my office and try backup via iTunes, he tells be that the administrator has disabled iCloud backup on the device.

  I don't know if I still have ideas, but I'm curious about this statement.

  1. You are the first owner of this phone?
  2. It's a phone of the company?
  3. Apple has any idea on this at all?

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• Impossible to activate the update lightroom5 to lightroom6

  Hello

  There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.

  And when I ask to generate I have the not not request.

  So how do?

  Thanks for your reply.

  

  We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:

  • https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  Hi Kenneth Ofosu Barko,

  Please disable any firewall or Antivirus for now and try to activate Acrobat again.

  Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

  Kind regards

  Rahul Tyagi

  

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry

• Impossible to activate the automatic update

  I tried securioty msc and Panel Essensials of Windows, as well as system menu... everything for nothing helped... less than 30 seconds of the automatic update is disabled.

  * Title *.
  Impossible to activate automatic update order to use Microsoft uypdate. Enery time that I manually activate the automatic updates, something disables it keeps me updated successfully in the update of Microsoft

  Mgawat,

  In addition to the information requested, try the fix it tool from the link below and let us know the results of that.  First run it in normal mode and test.  If you still have a problem then run it in aggressive mode.

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to activate the Agent FTR

  Dear all,

  I tried to activate the FTR agent but, impossible to activate it. When I checked the logs, I could see the following errors.

  "14/09/30 10:28:03.564 ECHO FATAL [Thread-40] com.quest.ftr.agent.ComMonitorThread - ComMonitorThread taken NoClassDefFoundError. Check the installation and the path of JAR files. Could not initialize class com.jacob.com.ComThread

  java.lang.NoClassDefFoundError: has not been initialized class com.jacob.com.ComThread
  at com.quest.ftr.agent.ComMonitorThread.run(ComMonitorThread.java:246)

  2014-09-30 10:28:03.564 ECHO INFO [Thread-40] com.quest.glue.core.services.AgentStatusServiceImpl - failure reported Agent
  2014 09-30 10:28:03.564 ECHO VERBOSE [Thread-40] com.quest.ftr.agent.ComMonitorThread - bridge COM out restart = false
  2014-09-30 10:28:03.564 ECHO com.quest.ftr.agent.ComMonitorThread WARN [Thread-40] - Caught throwable son freeing com could not initialize class com.jacob.com.ComThread
  2014-09-30 10:28:03.564 ECHO INFO [Thread-40] com.quest.ftr.agent.ComMonitorThread - COM monitor thread exit
  2014-09-30 10:28:03.564 ECHO VERBOSE [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - data collection to stop
  2014-09-30 10:28:03.564 ECHO INFO [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - data collection stopped
  2014-09-30 10:28:03.564 ECHO INFO [FTR AgentStatusService] com.quest.ftr.agent.FTRAgent - Agent stops collection
  2014-09-30 10:28:03.579 ECHO VERBOSE [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - agent of destruction
  2014-09-30 10:28:03.579 ECHO INFO [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance agent - destroyed"

  Could someone check and help me on this.

  Thanks in advance. :)

  Hi Renon,

  The first thing to check is that you have a 32-bit Foglight Manager Agent to run the agent FTR (even if it is on OS 64 - bit). This is a common reason for the agent to fail to start.

  From the release notes: The Foglight Transaction recorder and player are supported on 32-bit and 64-bit systems. Transaction Foglight player works on 64 bit systems only if the 32-bit version of Foglight Manager Agent is installed.

  Kind regards

  Darren

• Impossible to reactivate the backup under Windows 7 Ultimate plan

  I have been using windows 7 Ultimate on my Toshiba laptop for about 2 years. I've implemented a backup plan to backup every 28 days.

  It has worked to safeguard the 28/08/2012. However, it will not activate a backup for 30/09/2012 what do I change to reactivate the plan again?

  When I click on 'Backup now' nothing of backup jobs does not start and I can't change my backup settings, what do I do?

  Kind regards

  Donald Edmunds (Australia)

  E-mail: * e-mail address is removed from the privacy *.

  Hello DonaldEdmunds,

  Run SFC/scannow to see if you have corrupted system files. It may take a long time to run depending on the size of your disk.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  Try the backup again and see if you can make it work.

  Then check the event viewer to see if there are errors on the backup. Check the system event log and application logs. Then copy and paste errors in your response.

  Please answer back with an update on your status.

  Thank you

  Marilyn

• Impossible to activate the phone after 6 s restoration

  I just restored my iphone 6s now my old apple ID does not have to activate the phone... help nicely. The same id is used several times to download the files and applications. Also, I bought this new phone.

  Is this the only Apple ID you have? You know the partial Apple ID that shows activation?