Impossible to activate the Bluetooth on my Satellite C660

I have a Satellite C660-PSC1GA01E01M. Datasheet says now that this thing has BT built in already. I tried my best to install drivers for the module, but Device Manager me repeating...

"Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

OS: Windows 7 X 64 Ultimate SP1

Any help will be appreciated...

Hello

Try it please remove preinstalled Toshiba Bluetooth stack and restart your laptop.
After this visit Toshiba BT portal on http://aps2.toshiba-tro.de/bluetooth/ and download and install the last pile of BT.

Please send comments.

Tags: Toshiba

Similar Questions

  • Impossible to activate the Bluetooth on my Satellite A200 - 14 d

    I try to activate the Bluetooth in my laptop but I can't. I click on ConfigTree-> Bluetooth-> POWER ON, but it never lights... WHY?

    Hello

    1. check if BT is available on your laptop (label of BT in the lower corner should be available). If Yes, follow:
    2. turn the WLAN switch ON position.
    3 when the WLAN led is activated the key combination FN + F8 and option ACTIVATE BT.

    After that make of this new material will be recognized and installed. Check it please document posted by deepblue.

  • Impossible to activate the bluetooth on my G560e

    Hey,.

    I have a G560e and I can not activate my bluetooth. No button to activate the bluetooth appears when I press Fn + F5 and it doesn't seem to be any key on my keyboard or something. When I try to access Favorites Bluetooth I get the following message: "Bluetooth device not found. Check that your bluetooth device is properly connected and turned on.

    Is it possible that I don't have installed bluetooth devices, I read that not all models have it? Appers to device bluetooth as existing in the Device Manager, but the location is unknown. What does that mean?

    Thanks for your help!

    Hi, Odile.

    If you only see wireless power option when you press fn + f5, I think that your system did not come with bluetooth support.

    in this case, I suggest you use usb bluetooth.
    I hope this helps.

  • Impossible to activate the keyboard on my Satellite Pro L50B light

    I have a L50B Pro Satellite and I can't light the keyboard lights up. Can someone tell me how to do what you please. This model was $ 1,600 there probably a light support. FN - There does nothing.

    Also I can not drive how to turn the webcam on...?

    Check the BIOS settings please. Less advanced > system configuration you can find the option to enable/disable webcam. Check please if your webcam is properly enabled.

    You can also find "Keyboard Backlight Control Mode" option. ry, please change these settings in the BIOS directly.

    By the way: do you use the original pre-installed OS that you got with your laptop?
    Other FN keys work correctly?

  • Satellite Pro R50 - B - 12 p - how to activate the bluetooth Assistant

    Does anyone know how to turn off the bluetooth on a Satellite Pro R50 - 12 BA Wizard?

    If I uncheck and apply the "enable bluetooth Assistant" box, the box is always reticked when I log in.
    How can I keep it unchecked permanently?

    PS, I learned by warranty Toshiba that I would have to pay to get the software support for this problem.
    So I buy a laptop for my school, download the provided faulty drivers and have to pay for repair?

    Come on Toshiba.

    Hello

    Are you using the Windows 7 system?

    If so, I think that Bluetooth is displayed in the list of applications that will be always loaded during system startup.
    You can disable this in msconfig.
    In RUN, type msconfig. Then switch to the Startup tab.
    Search here for Bluetooth a uncheck the brand.
    Now restart the system.

    By the way: software issues not covered by the warranty.

  • Satellite Pro U200 - how to activate the bluetooth connection

    How to activate the bluetooth connection?

    Hello

    First check to see if your computer supports BT
    If the laptop supports BT, then you should find a BT tag at the bottom of the unit.
    If there is no label then your machine was not equipped with internal BT module!

    If the laptop supports BT, then use the FN + F8 key to go to the BT
    Then BT should start installation and configuration.

    For more details, see this forum and this Toshiba BT Portal:
    http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ

  • Impossible to activate the dark mode in Firefox 39.0 with subject: config.

    After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

    That's what I changed:
    Browser.devedition.Theme.Enabled: true
    devtools. Theme: black
    lightweightThemes.selectedThemeID: [email protected]

    I use "Fox, but better" plugin and I have to disable it without success.

    guigs2 said

    Hi CiRiX,
    I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

    It is possible to reinstall the extension, or try these troubleshooting steps:

    I managed to fix it by clicking Activate and then deactivate it on another theme.

    Thanks for your help!

  • Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

    Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

    Hey daltsdad,

    It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

    8500 downloads

  • HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

    I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

    Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

    In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

    I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

    Thanks for any help!

    Hi @3star8,.

    Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

    This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

    Please let me know the result and if there is anything else I can help you. Thank you.

  • Impossible to activate the laptop on Windows 7 computer wireless network connection

    I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

    * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

    Hi djmoore20,

    See the following article with information and troubleshooting on your question:

    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

    Hello

    I use Oracle Database 11.2.0.4.

    After reading the documentation on how to prevent unwanted table DDL statement.

    I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

    Turn it off doesn't work, however I can not re - activate.

    The error message is:

    ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

    I want to activate the lock, because I need to add new columns to this table.

    I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

    Impossible to activate the table lock after disablng it

    ALTER table enable table lock blocking

    However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

    'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »


    By the way:

    1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

    2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.


    It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

    The table itself is located on the stops and never schema of production on which transactions take place continuously.


    Is it true that Oracle expects all execute transactions? Is it known bug?

    Why would Oracle wait as all transactions which has nothing to do with the underlying table?

    Is there no workaround solution to solve this?


    Note:

    I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.


    Kind regards


    Buntoro

    Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

    Quiesce

    --

    John Watson

    Oracle Certified Master s/n

  • Impossible to activate the update lightroom5 to lightroom6

    Hello

    There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.

    And when I ask to generate I have the not not request.

    So how do?

    Thanks for your reply.

    Doc1.jpg

    We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:

  • How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

    How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

    Hi Kenneth Ofosu Barko,

    Please disable any firewall or Antivirus for now and try to activate Acrobat again.

    Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

    Kind regards

    Rahul Tyagi

  • Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

    Hello

    I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

    Could you please help me, where is the problem?

    I bought licenses for the view with the composer.

    My environment are:

    2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

    4 x 4 ESX u2 (2xESX by vCenter server)

    2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

    Thank you

    You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

    You have 4 options:

    Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

    Option 2: Use SYSPREP instead of QuickPrep

    Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

    Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

    HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

    Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

    The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

    Larry

  • Satellite P750: Impossible to install the Bluetooth Stack on Windows 7 (x 64) driver

    Hello.

    I own a * Satellite P750-02 t * (part No. * PSAY3A - T 02 001 *).

    In the order I did:

    (1) I formatted the HARD drive and reinstalled the operating system of * Windows 7 x 64 Ultimate SP1 *.

    Then I downloaded * ONLY the BIOS and drivers * of [his downloads page | http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25]:

    (2) I've updated the BIOS for * v1.90* (the laptop came with v1.80)

    (3) I have installed all drivers:
    -LAN and WiFi
    -Chipset Intel latest (available)
    -all video drivers (NVIDIA Graphics, Intel HD Graphics and Intel HDMI)
    -Card reader
    -Realtek HD Audio (later)
    -Synaptics Touchpad
    -USB3.0
    -IR
    TV tuner
    However, I * cannot install Bluetooth driver (v8.00.06 (T) *)...

    When I run the installation program of the [aforementioned page | http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it detects partially *'Bluetooth USB Controller-10 TOSHIBA'* (USB\VID_0930 & PID_0215 & REV_001)
    and then the installation freezes simply displaying + "install the Bluetooth driver. Please wait +.' and stay like that forever...

    I also tried to download a driver [another location | http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for laptops TOSHIBA - v8.00.02 (T):
    and followed installation instructions displayed under "Details".
    but he had the same result: the installer simply crashes...

    Install fix (* KB978258 *) recommended it did not work either - the message "+ update is not applicable to your computer +" appears.
    And I understand why - this fix is [already included: http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] in Service Pack 1 for MS Windows 7.

    I spent hours searching the Internet for a solution. Although there are some similar cases, none of the recommendations actually worked. I tried to install:
    -WiFi driver before installing the Bluetooth (someone suggested that these two are parts of the same card);
    -Repeat Mode Setup without failure;
    -* Toshiba value added package * hoping that somehow these tools will kick in.
    Nothing has worked...

    It is interesting to note that when, in the interests of experimentation, I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks | http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything runs smoothly!

    * Using connection Bluetooth on this laptop is absolutely crucial for TI
    I hope that I won't get back this beautiful laptop as I know that TOSHIBA is one of the best manufacturers and I am sure, that there is a solution to this problem.

    Thank you very much.
    Evgeny.

    Post edited by: cardiovascular disease
    specified on the use of another generic Bluetooth adapter with non-TOSHIBA driver

    You can use the key combination FN + F8 to toggle WLAN?
    You can also see BT symbol there?

    Before you begin installation battery BT try to activate BT module by using the FN + F8 key combination.

    Generally avoid some problem with it. Toshiba BT stack is tested on al models proposed by Toshiba and fireplace installation BT has, in my view, nothing to see what version of Win7 you use.

    Do not return this laptop. It has to do is just install drivers, tools and utilities. Please note: BT stack is included in the recovery image so BT must work.

    Also, I must say that OS installation of drivers, tools and utilities on Toshiba laptop must / should be installed in the correct order. Many tools can work only and must be installed on basic stuff that can be installed with other specific tools of Toshiba.

    Please send a few comments if this FN + F8 will work.

Maybe you are looking for

  • Why my apple tv keep saying to turn on home sharing on my computer when it is already on?

    I can play all my purchased movies and apps etc just fine on my appletv. My problem is when I go to play a movie from my itunes library, that it will not, I would like to, telling me to make sure that home sharing is on. He turned on my computer, my

  • return of the packages

    Hi Expert, The concept of the ACL on the router, to the statement ACL "established" for return packages that is the author. As in the following example, it is not ACL on outbound traffic, but controls only inbound traffic. ! 2811 router ! FE0/1 inter

  • BlackBerry Smartphones hand-Help!

    A friend has recently updated and gave me his curve 8330. He had a configuration of Verizon, I currently have a TMobile phone account. Still, where should I start?  The person in the TMobile store had no idea.

  • Case of belt blackBerry Smartphones BB Curve 8520

    I have a silicone cover on my Curve 8520.  Anyone have a recommendation for a good belt clip case that BB and the lid will fit in?  My old BB 8300 case does not sit well with the lid.

  • No audio from another application if an application is already playing sound inside

    Hello Whenever I play videos on VLC media player and open youtube to watch the video, it plays the audio.However, when I close VLC and refresh the page of youtube, audio is found.Strange!Can you please help me with this. Thank youAbhishek Kulkarni