Impossible to activate the Security Center

Similar Questions

• Impossible to activate the secure connection

  I have a fresh install of Vista Business (32) preloaded on my new laptop Acer TM 5530.

  I read help for 'Enable or disable a secure connection (CTRL + ALT + DELETE)', which says:

  1. Click to open advanced user accounts. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Click the Advanced tab, select users must press Ctrl + Alt + Delete check box, and then click OK.

  I'm in the built-in administrator ID.

  I followed the instructions, but "Ask users to press Ctrl + Alt + Delete" is gray on the Ant, the checkbox is not accessible.

  What should I do?

  Hello SHCA,.

  Thank you for using the Microsoft Answers forum.  This happens usually when your account does not have a password.  To create a password to do the following:

  1. Open accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, and then clicking user accounts. 2. Click create a password for your account. Note If your user account already has a password, you can change your password by clicking change your password. 3. Type the password in the new password box, and then retype the password in the new password confirmation box. 4. If you do not use a password hint, type the suspicion in the box of the indication of password . 5. Click create password.

  It is important to keep your computer as secure as possible. One way to do is to allow a secure connection so that you are required to press CTRL + ALT + DELETE to log on. Using a secure connection provides an extra layer of security for your computer by ensuring that the authentic Windows logon screen appears. When a secure connection is enabled, no other programs (for example, a virus or a spyware) can intercept your user name and password when you enter it.

  	1. Click the Start button, type netplwiz in the search box and press ENTER.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. 2. Click the Advanced tab, check the box users need to press Ctrl + Alt + Delete , and then click OK.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot depend on Security Center "the Security Center cannot start."

  I'm afraid that my computer may not be protected because I cannot depend on SecurityCenter, would appreciate any advice, thank you very much.

  Original title: when I try to activate the Security Center, I receive a message saying "failed to start Security Center" can someone tell me why?

  Hi Bluehound,

  • Since when are you facing this problem?
  • You did changes to the computer before this problem started?
  • You have a third-party security software installed on the computer

  Step 1

  First of all, check if the Security Center service is set to automatic and started. To do this follow the steps below:

  a. Click Start.

  b in the start search box type services.msc and press to enter.

  (c) in the services window, do scroll down to Security Center.

  d. right-click on it and click Properties.

  e. check if the startup type is set to automatic, otherwise it is set to automatic.

  f. click on the Start button, this will start the Security Center service.

  g. click on apply and Ok.

  Check if you can enable the Security Center.

  Step 2

  If the problem persists, you can also try to temporarily disable third-party security software on the computer and try to check if you can enable the Security Center. If you are able to start, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receive the error message when you try to activate the solution Center

  I get an error message when I try to activate the Solution Center.  'Error in the file c:\Program Imaging\bin\hpqscloc\1033.xml HP analysis'

  I tried to remove and reinstall the entire software suite several times, but did not uninstall the Solution Center file.

  OfficeJet J6450.  Windows 7, 32 bit.

  Hey R29,.

  Start by downloading the full package of driver from here: HP Officejet full feature and driver software

  If you have recently downloaded this driver package, you may be able to skip this step. If you have problems with the steps below and impossible to find a directory, you must re-download the driver pack and launch the exe.

  1. disconnect the USB from the computer printer.

  2. now, go to start > run > and type folder

  3. search for any record label hp_web_release or 7z

  4 inside of this folder, navigate to the 'util' directory > directory 'ccc '.

  5. in there, run Uninstaller_L1 through L4 in order.

  6. check Add/Remove programs in the control panel for additional HP programs that have not been deleted and delete.

  7 remove the HP or Hewlett-Packard directory in Program Files.

  8 Goto Program Files > common files and remove the HP or Hewlett-Packard directory there as well.

  9. Select start > run and type "temp". inside this folder, delete all the files.

  10. Select start > run and type "%temp%". inside this folder, delete all the files.

  11. now restart and reinstall the driver using the driver from the web.

  Let me know if that solves the problem.

  Thank you!

  Sean

• How to get the Security Center to turn on MY

  I hope that the answer to this will not take as long as he did to register on this site to ask a question...!

  MY is all green with a check mark (icon on bottom RHS of the screen.  However, the Security Center said no active antivirus.  Please tell me (in simple terms - I'm not a computer Wizard) how to get the SC to activate MY.

  Thank you.

  Hello

  Sometimes, it is a bug that occurs, especially after installing MSE for the first time. Restart the computer and see if the Security Center successfully, then reports that you are protected by an antivirus.

  If restarting the computer does not resolve it, try the following fix - http://social.microsoft.com/Forums/en-US/c0ca9eb2-14b0-4591-be85-4b7fd1700191/windows-security-center-wmi-fix-onecare-green-security-center-at-risk

  Kind regards

  Patrick

• Could not start the Security Center Service

  I clicked on Windows security alerts, it showed "The Security Center Service is disabled".  Then I clicked "Activate now", came a "Could not start the Security Center Service" message.  Please tell me what I need to do.

  Thank you very much!!!

  Longpo

  See if these are useful:

  http://support.Microsoft.com/kb/2519899

  OR

  http://support.Microsoft.com/kb/2510301

• Windows vista 32-bit error code 0 x 80070424 - the Security Center service cannot start

  Hello.

  I have Vista Home premium SP2, 32-bit operating system. A week ago, I received a .rar file, Avira has said has been infected. I did not open the file, I deleted, ran a complete analysis of the system and assured there was no residue. However, after that, I realized that the defender was not on and then realized that my firewall did not work either.

  Specificities of each:
  (a) it seems that my firewall has disappeared, and specifc messages I get when trying to turn on my firewall is: "could not start the Security Center service. When I run services.msc, I am not at all a security service, all I have is a security accounts manager.
  (b) when I try to activate Defender, I get the error code 0 x 80070424. «Windows Defender encountered an error: 0 x 80070424.» The specified service does not exist as an installed service. »

  I tried 5 different Microsoft its difficulty, but none have worked so far. I also tried to reinstall Windows Defender, but Microsoft said that I installed it. All updates are underway. I followed the steps in this link: http://support.microsoft.com/kb/968002 and no. chance either. I used additional resources and tried following these steps also, but all services have already started on my system.

  Can you help me please?
  Much appreciated,
  ~ naila

  Hello nailal,

  Please follow the advice given in the article below:

  Article number: 968002 -.

  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall Please reply back and let us know if this can help. Thank you Marilyn

• Message: "the Security Center service cannot be started. I am running Vista, fully up to date with AntiVirus & Anti Malware, & others. Unable to change the center of security of people with DISABILITIES.

  Message: "the Security Center service cannot be started. I am running Vista, completely up-to-date with Avira AntiVirus, Malwarebytes - Anti-Malware, MS/scans of Windows Security Center (for example MS Fix It programs Center), etc. No Malware has been found. Despite me trying to re - set the Security Center using start > Services > SecurityCenter > change to "Automatic (delayed start)" people with disabilities > start > output the re-creation is not the owner and I'm back with no security - with the same message as the original. I spent hours trying to deal with this. There is no known new applications/programs, and the problem started about 3 days ago. Help requested - thanks. JohnG - Sydney

  Hello

  ·         Are you can change the Security Center service parameter by using a different user account on the computer?

  I suggest you to make sure that Windows Defender is running. Follow the below mentioned articles and check.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: If the method above is not enough, then I suggest refer you the link try the steps and check if that helps:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

   

  Note:

  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  If you are using the original computer and the new laptop image, you will need to purchase a product key to activate the copy of windows installed on the laptop.

  Hope the information is useful.

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• I had Security Center windows 2011 which is a virus.how do that I get rid of it, it won't let me do the web thanks to warnings from the Security Center

  I had Security Center windows 2011 which is a virus.how do that I get rid of this, it doesn't let me do the web thanks to warnings from the Security Center, because it maintains changig my web page

  info at the bottom of this website-

  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

• When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.

  When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.  I can't see if any firewall or antivirus works etc.  Anyway to reinstall the Windows Security Center or is there something else I can do.  Concerning

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Follow the procedure described at the link below and check if it will help: error message when you try to open the Windows Security Center in Control Panel on a Windows XP computer: http://support.microsoft.com/kb/919291

• My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll Security Center, click...
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say this, do a RIGHT click on Security Center > in the new window, make the necessary changes...
  the startup type, click on the pointer, and then select Automatic (delayed start)
  the service status, click start
  Click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Security Center Windows won't power up - error: could not start the Security Center Service

  Windows Security Center does not, when I try to turn it on there an error message says "Cannot start the Security Center Service". There is an icon on the bottom of my screen of windows security alert, I don't know if my computer has a virus, but I scan my Norton Antivirus full of the online system, but it has not detected any viruses. I hope someone can help me with my computer. It will be much appreciated.

  No, only the security accounts manager isn't Security Center.

  The next method is to restore the missing Security Center service.

  http://www.Winhelponline.com/temp/W7-wscsvc.zip

  Unzip the REG file and then run it.

  Then restart.

  See if this will help restore Security Center application Services.

• How can I activate the security system?

  I tried to turn on my windows Security Center, open widow and I clicked on the security Tower Center on. I have that then I got an opop window saying windows Security Center service cannot be turned on.

  Hi DavidMassett,

  1. did you of recent changes on the computer?

  2. What is the full error message that you receive when you start the service?

  3. do you have security software installed on the computer?

  4 when was the last time it was working fine?

  I suggest that you try manually start the service of security of Windows on the computer and check if it helps.

  (a) open the Start Menu

  (b) type services in the start search box and press enter

  (c) in the Security Center locate service list and try to start the service.

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads