Impossible to activate the services web ePrint for Color LaserJet M551

Hello

I read all the posts in this forum about the web services enabling ePrint to the question and tried all suggestions with no luck.

Here's the situation:

  1. The printer works fine on place. I can print without problem.
  2. The printer is connected.
  3. All my router ports are open for outbound connections, including UDP.
  4. Communication using log in my router I can see that the printer can resolve DNS names using either my ISP DNS server or the suggested 8.8.8.8 and 8.8.4.4. Using nslookup shows ' registration-pro - site1print.houston.hp.com "Decides to 15.240.60.111 and" registration-pro - site2print.houston.hp.com "Decides to 15.201.224.79.
    This indicates that the printer can indeed resolve the addresses. Newspapers also Awakenings that the printer communicates with the servers (connection is established and data transferred) via https (probably the web service), but always after a few minutes the clearance process is to expire.
  5. I tried this allowing the procedure since a few days my believe that the recording servers should have worked some time during this period.
  6. I'm frustrated
  7. .. .even more frustrated
  8. what I am doing wrong?
  9. Help, please!

trying to install eprint for my new M551dn Color LaserJet and it fails with the

Who out there having the same problem I had. HP could not help me I restore to factory settings and reconfigured everything and all of a sudden the printer managed to enable web services and print the print code.

Good luck to you face the same problem!

/ MrQQ

Tags: HP Printers

Similar Questions

  • m251n impossible to activate the services web hp

    I just got a M251n printer and I tried to set up the wireless for hours through suggestions of support and none have worked.  Trying to activate the configuration of Web Services I receive a message "connection error. Check the internet connection. "The connection is fine and working and the printer is connected via ethernet, and my computer is connected to the printer by USB.

    I use a Mac and you have downloaded the latest driver for the printer.  A suggestion of support said I could have exceeded firmware but I can't find the updates of the firmware for this printer.

    I don't know what the problem is.  It is not straightforward and without the work of wireless, I'll have to return to this printer and buy another brand.

    Any suggestions are welcome.

    Hello neilthedirector,

    Welcome to the Forums of HP Support!

    I see that the color HP LaserJet Pro 200 M251n printer that you cannot activate Web Services. I was able to locate a utility to update the firmware that you can check the printer with, if you are using Mac OS X 10.5 - 10.8.

    HP LaserJet Pro Series Firmware Update Utility<>

    If the update is not present or is unable to solve the problem, try applying a manual IP and DNS address. For that;

    • Enter the IP Address of the printer in the address bar of Safari.
    • Click network, and then Configuration IPv4.
    • Define the INVESTIGATION period preferred to deal with the manual method.
    • Increase the last set of numbers from 50.
    • Subnet mask should be 255.255.255.0.
    • Default gateway is the IP address of your router.
    • Click Network on the left Identification.
    • Under primary DNS (IPv4), enter 209.244.0.3, and secondary (IPv4), enter 209.244.0.4.
    • Click on apply and then turn the printer off, then on.

    Now try to activate Web Services.

  • Impossible to activate the HP Web services for my HP Laserjet 200 MPF M276nw color

    Kindly help, I tried to update the firmware, but still my web services will not turn on.

    RGS

    G

    Hi GayleneC,

    Thank you for the update and additional information.  I really appreciate it.

    You indicated that you tried to update the firmware, I wonder because the printer is not connecting to web services that is may not have logged in to check the updates of the firmware.  I have included two links, one is for the Windows of HP LaserJet Pro Series Firmware Update Utility version , the other is for the Mac version of the HP LaserJet Pro Series Firmware Update Utility. Please choose your operating system and we will try and update the firmware without using the front panel of the printer.

    After you run the firmware update utility, please disable IPv6 wireless via built-in web server.  Please follow the steps below:

    1. To open the HP embedded Web server, type the IP address of product in a Web browser address line. When it opens, it should look like the screenshot below.

    2. Please click on the 'Network' tab as highlighted in the screenshot above.

    3. Please click on 'Advanced' in the side menu on the left as indicated above. Please disable IPv6 and click 'apply '.

    4. Please click on the "HP Web Services" tab.

    5. Please click on the button "activate". Print the newsletter of Web Services.

  • Power failure during the update of firmware for Color LaserJet 2600n

    Just in the middle of the update the firmware for my Color LaserJet 2600n, the power is out. Now I can't get anything to happen on the printer. The screen, or the power lights and the error light, but it does not work when the power is put on. I think that he wiped the previous firmware and either had not started or has been along the way in writing the new info. Is it possible that I can cancel it and reload the original firmware? It hangs on my MacBook Pro running OS 10.6.8. The only thing that the instructions seriously cautioned against a interrupt the installation. Needless to say, this is exactly what happened when the power is out. Any help would be greatly appreciated.

    Randy

    Able to understand me. Has proved to be quite simple. Powered off the printer and turn it back on and represented the firmware upgrade program. The printer didn't restart automatically, so I had to power off and wait 5 seconds before feeding this back. Once he recalibrated itself (which takes several minutes), I was in business.

  • Impossible to activate the Premium Web Services HO Officejet 6700

    Printer is connected to a wireless home network. Using the contorl Panel set up printer continues to say "update could not be downloaded. Press Retry but still fails. Active WiFi connection and his work.

    I understand that you're having trouble getting web services to activate.
    Follow these steps.

    1. open an internet browser type IP address.
    2 should bring you to the status of the printer page.
    3. Select the tab network at the top.
    4. left side select IPv4 under wireless.
    5. under addressConfiguration DNS, select manual DNS server.
    6. for favorite enter 8.8.8.8
    7. for alternate enter 8.8.4.4
    8. Select apply. You can get a warning saying that this could break the connection which is very good.
    9 turn the printer off for about 30 seconds, and then try again to access the applications.

    Let me know how it goes.

  • Impossible to activate the services on VMKernel adapter when you use a custom TCP/IP stack

    Hello

    Very strange error.

    Unable to activate services on VMKernel adapter when you use a custom TCP/IP stack.

    Added custom stack by using this command: esxcli network ip netstack add n = "10 GB"

    Using the GUI to add the adapter to a normal vswitch.   By choosing the new battery, all services are grayed out.  (at time of pick their all first on the stack on the other, then change to the new battery, it shows in preview before pressing the finish)

    running on vcenter build camera 5.5 1440531

    ESX 5.5.0 1439689 (VSAN release)

    No idea what could be the problem?

    Stack additional TCP/IP is not fully functional to 5.5 for vmkernal services.

    Note this:

    Documentation Centre of vSphere 5.5

    You can activate services for the default on the host computer TCP/IP stack.

  • DeskJet HP 3830: impossible to activate the scan on mac for 3830 aio

    Impossible to enable analysis of the computer using the hp utility or by using easy scan, but can analyze whether I go to System Preferences and then printers then scan that works very well, I tried to remove and reinstall several times but it makes no difference.

    The connection to the printer over the network and works very well on printing as well if it's not a connection issue.

    Any help would be useful

    Hello
    In the Applications folder or its subfolder HP remove all existing HP Scan or app HP Easy Scan by moving it to the trash, then empty the trash.

    Then install the latest HP Easy Scan below, it will be installed in the Applications folder:
    http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

    If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
    http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip

    Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
    Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

    Now, check if you can see a difference when accessing the HP utility
    Kind regards
    Shlomi

  • How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

    How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

    Hi Kenneth Ofosu Barko,

    Please disable any firewall or Antivirus for now and try to activate Acrobat again.

    Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

    Kind regards

    Rahul Tyagi

  • Impossible to activate the update lightroom5 to lightroom6

    Hello

    There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.

    And when I ask to generate I have the not not request.

    So how do?

    Thanks for your reply.

    Doc1.jpg

    We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:

  • Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

    Hello

    I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

    Could you please help me, where is the problem?

    I bought licenses for the view with the composer.

    My environment are:

    2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

    4 x 4 ESX u2 (2xESX by vCenter server)

    2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

    Thank you

    You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

    You have 4 options:

    Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

    Option 2: Use SYSPREP instead of QuickPrep

    Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

    Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

    HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

    Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

    The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

    Larry

  • Impossible to activate the dark mode in Firefox 39.0 with subject: config.

    After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

    That's what I changed:
    Browser.devedition.Theme.Enabled: true
    devtools. Theme: black
    lightweightThemes.selectedThemeID: [email protected]

    I use "Fox, but better" plugin and I have to disable it without success.

    guigs2 said

    Hi CiRiX,
    I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

    It is possible to reinstall the extension, or try these troubleshooting steps:

    I managed to fix it by clicking Activate and then deactivate it on another theme.

    Thanks for your help!

  • Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

    Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

    Hey daltsdad,

    It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

    8500 downloads

  • HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

    I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

    Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

    In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

    I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

    Thanks for any help!

    Hi @3star8,.

    Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

    This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

    Please let me know the result and if there is anything else I can help you. Thank you.

  • Call the Service Web Studio omitting

    We have developed and tested an application made call Studio. This application uses a WSDL to call a web service. We have deployed this application on 2 identical servers of the CVP. The server "A" runs this application successfully every time. The 'B' server fails everytime, it performs the service web appeal. Both servers are installed to access the same WSDL.

    We have attempted to circumvent the problem but cannot locate a network problem which would make the request fails on the side 'B '. Our network traces show the CVP 'B' server, sending a GET request to obtain the WSDL, but there is never of messages as well as the side "a".

    What can the places we are trying to determine what the cause of this failure. Attached, is output to the log file for this application where it is a failure.

    No matter how lucky are going some firewalls?  It's not just sound right.

    David

  • Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

    Hello

    I use Oracle Database 11.2.0.4.

    After reading the documentation on how to prevent unwanted table DDL statement.

    I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

    Turn it off doesn't work, however I can not re - activate.

    The error message is:

    ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

    I want to activate the lock, because I need to add new columns to this table.

    I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

    Impossible to activate the table lock after disablng it

    ALTER table enable table lock blocking

    However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

    'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »


    By the way:

    1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

    2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.


    It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

    The table itself is located on the stops and never schema of production on which transactions take place continuously.


    Is it true that Oracle expects all execute transactions? Is it known bug?

    Why would Oracle wait as all transactions which has nothing to do with the underlying table?

    Is there no workaround solution to solve this?


    Note:

    I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.


    Kind regards


    Buntoro

    Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

    Quiesce

    --

    John Watson

    Oracle Certified Master s/n

Maybe you are looking for

  • No bar menu under Ubuntu 11.10

    I did experiment with Firefox and the latest version of Ubuntu. I am unable to get the feature to import/export bookmarks and reading help files, there is no bar menu under Tools.

  • Satellite C885 - installation of Windows 7 does not continue

    Last week, I bought a C855-21V Satellite with Windows 8 is installed.Now I want insstall becauso Windows 7 Windows 8 is not good for me. When I insert the Windows 7 CD and boot from the CD, the Installation hangs on the screen which shows "Starting W

  • Why have I not to close a file refnum after doing a file before a file of reading and writing

    Looking at the example of read-write text file I noticed on the Refnum case after making the text file write she closes the refnum and to read the text file opens again. Why must you close and reopen? Why can´t you use open file with the option creat

  • Wmplayer.exe - bad Image

    Run us Windows xp service pack 3 and may not display any video file without getting the error message above. The rest of the message says the application or DLL c:Windows\system32\dbghelp.dll is not a valid windows image. Please check this against yo

  • To identify the multiscreen

    Hello IM building an application that requires the multi screen and the user in the way which interact to these screen can be arbitrary, does anyone have an experience (or snippet of code would be great) on how to manage the many screen and push and