Impossible to activate the update lightroom5 to lightroom6

Hello

There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.

And when I ask to generate I have the not not request.

So how do?

Thanks for your reply.

Doc1.jpg

We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:

Tags: Adobe

Similar Questions

  • Impossible to activate the automatic update

    I tried securioty msc and Panel Essensials of Windows, as well as system menu... everything for nothing helped... less than 30 seconds of the automatic update is disabled.

    * Title *.
    Impossible to activate automatic update order to use Microsoft uypdate. Enery time that I manually activate the automatic updates, something disables it keeps me updated successfully in the update of Microsoft

    Mgawat,

    In addition to the information requested, try the fix it tool from the link below and let us know the results of that.  First run it in normal mode and test.  If you still have a problem then run it in aggressive mode.

    Reset the Windows Update components

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Impossible to activate winodws updates on Vista Home

    I have the question googles; tried the Microsoft fix filoe but impossible to activate Windows update

    Hello

    (1) what happens when you try to activate the update? You receive an error message?

    (2) who is the Fixit you tried?

    (3) when was the last time it worked?

    I suggest you follow these methods and check.

    Method 1: Perform the clean boot and install the updates.

    Follow the suggestions of this link.

    http://support.Microsoft.com/kb/929135

    NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

    Method 2 : Reset Windows Update components and check with the question.
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows

    Method 3: Run the system update tool and install updates.

    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    http://support.Microsoft.com/kb/947821

    If the method above does not work, proceed to the next method.

    Method 4: Perform a full scan of the computer using the following antivirus applications and try to install the updates.

    Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I hope this helps!

  • Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

    Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

    Hey daltsdad,

    It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

    8500 downloads

  • Impossible to activate the dark mode in Firefox 39.0 with subject: config.

    After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

    That's what I changed:
    Browser.devedition.Theme.Enabled: true
    devtools. Theme: black
    lightweightThemes.selectedThemeID: [email protected]

    I use "Fox, but better" plugin and I have to disable it without success.

    guigs2 said

    Hi CiRiX,
    I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

    It is possible to reinstall the extension, or try these troubleshooting steps:

    I managed to fix it by clicking Activate and then deactivate it on another theme.

    Thanks for your help!

  • Update iPhone 4s to 9.2.1 says: impossible to verify the update you are no longer connected to the internet. but I am connected through wi - fi.

    Update iPhone 4s to 9.2.1 says: impossible to verify the update, you are no longer connected to the internet. But I am connected by wi - fi and I get an email on the phone. My existing operating system is 6.something.

    Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

    If that doesn't work, try updating through iTunes on your computer.

  • Impossible to apply the update

    Automatic updates of Windows using these 4 security updates continually fails when you try to update - KB973705 KB974554, KB972580 KB974771.
    I used the automatic Windows update successfully for years.

    I was directed DIRECTLY download each update security - individually.
    I went to-http://www.microsoft.com/downloads/en/results.aspx?displaylang=en&freetext=security%20update
    and KB973705 KB974554, KB972580 KB974771 added one at a time
    in the search engine, then downloaded successfully on my desktop.

    I tried to use each installation file, and had all the programs are closed including antivirus programs.

    Every time that crosses the entire patch update process, and then at the end, I get this error message.

    IMPOSSIBLE TO APPLY THE UPDATE

    I try next?

    Hello

    Welcome to Microsoft Windows 7 answers Forum!

    You can try the steps below and check if the problem is resolved.

    This problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and find the number.

    You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

    How to reset the Windows Update components?

    http://support.Microsoft.com/default.aspx/KB/971058

    Also, visit the following link for more reference.

    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

    http://support.Microsoft.com/kb/910339/

    Hope this information is useful.

    Thank you, and in what concerns:

    Suresh Kumar-Microsoft Support.

    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

  • HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

    I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

    Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

    In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

    I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

    Thanks for any help!

    Hi @3star8,.

    Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

    This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

    Please let me know the result and if there is anything else I can help you. Thank you.

  • Impossible to activate the laptop on Windows 7 computer wireless network connection

    I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

    * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

    Hi djmoore20,

    See the following article with information and troubleshooting on your question:

    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

    Hello

    I use Oracle Database 11.2.0.4.

    After reading the documentation on how to prevent unwanted table DDL statement.

    I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

    Turn it off doesn't work, however I can not re - activate.

    The error message is:

    ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

    I want to activate the lock, because I need to add new columns to this table.

    I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

    Impossible to activate the table lock after disablng it

    ALTER table enable table lock blocking

    However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

    'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »


    By the way:

    1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

    2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.


    It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

    The table itself is located on the stops and never schema of production on which transactions take place continuously.


    Is it true that Oracle expects all execute transactions? Is it known bug?

    Why would Oracle wait as all transactions which has nothing to do with the underlying table?

    Is there no workaround solution to solve this?


    Note:

    I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.


    Kind regards


    Buntoro

    Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

    Quiesce

    --

    John Watson

    Oracle Certified Master s/n

  • How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

    How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

    Hi Kenneth Ofosu Barko,

    Please disable any firewall or Antivirus for now and try to activate Acrobat again.

    Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

    Kind regards

    Rahul Tyagi

  • Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

    Hello

    I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

    Could you please help me, where is the problem?

    I bought licenses for the view with the composer.

    My environment are:

    2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

    4 x 4 ESX u2 (2xESX by vCenter server)

    2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

    Thank you

    You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

    You have 4 options:

    Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

    Option 2: Use SYSPREP instead of QuickPrep

    Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

    Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

    HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

    Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

    The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

    Larry

  • Want 5540: Impossible to activate the computer Scan: 5540 Envy, MacOS 10.12

    I tried to activate the Scan of the computer using the HP utility application settings. I received the message (in part), "HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest software recommended HP... ».

    I then proceeded to the HP website and downloaded the appropriate firmware update. When running the executable, I received the message (in part) "device is in an error state and cannot be flashed because of this... »

    NB., we have been able to print using this printer, Wi - Fi, easily, since the purchase and installation on 28/08/16. No problem. In addition, using the * Apple * settings, by selecting 'Printers and Scanners' and going through the routine of "Scan", I can acquire a successful analysis (placed in "jpg" format in the 'Images' folder).

    I'm so concerned - very disappointed - as to why I can't activate and use the "Scan to computer" utility from HP. It does not work from the laptop computer side or from the printer control panel.

    Advice?

    Hello
    If you have HP scanning or a previous version of HP Easy Scan in the Applications folder or HP subfolder, delete it by moving it to the trash, and then empty the trash.

    Install the latest HP Easy Scan below, it will be installed in the Applications folder:
    http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

    If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
    http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip

    Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
    Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

    Kind regards
    Shlomi

  • Satellite Pro P300 - impossible to activate the built-in microphone

    I bought a Satellite Pro P300 some 2 months and so far so good.

    It has a webcam which I really thought that I would have any use for it but now find that I have.

    The camera works fine but I cannot activate the built-in microphone.

    Can someone point me in the right direction please

    Hello

    You will need to start the webcam software if you want to use the internal microphone too.
    The point is that the internal MIC is connected with the internal webcam and webcam software handles both devices.
    Also check if the internal mic has been correctly enabled in the webcamsoftware

    In addition, I would recommend updating the audio driver.

    Best regards

  • Impossible to activate the HP Web services for my HP Laserjet 200 MPF M276nw color

    Kindly help, I tried to update the firmware, but still my web services will not turn on.

    RGS

    G

    Hi GayleneC,

    Thank you for the update and additional information.  I really appreciate it.

    You indicated that you tried to update the firmware, I wonder because the printer is not connecting to web services that is may not have logged in to check the updates of the firmware.  I have included two links, one is for the Windows of HP LaserJet Pro Series Firmware Update Utility version , the other is for the Mac version of the HP LaserJet Pro Series Firmware Update Utility. Please choose your operating system and we will try and update the firmware without using the front panel of the printer.

    After you run the firmware update utility, please disable IPv6 wireless via built-in web server.  Please follow the steps below:

    1. To open the HP embedded Web server, type the IP address of product in a Web browser address line. When it opens, it should look like the screenshot below.

    2. Please click on the 'Network' tab as highlighted in the screenshot above.

    3. Please click on 'Advanced' in the side menu on the left as indicated above. Please disable IPv6 and click 'apply '.

    4. Please click on the "HP Web Services" tab.

    5. Please click on the button "activate". Print the newsletter of Web Services.

Maybe you are looking for

  • Toshiba Satellite S50 - A - is dead HARD drive?

    Hello.. I hope I can get some answers from other owners of S50 - A or least maybe a tech?... are these discs defective or only supposed to last two years so you get out of your wallet again so Toshiba infiltrates the money from you? My father bought

  • Can I buy the United States if I live outside the United States?

    I am trying to buy the g of the version of page USA bike, and they ask me a phone number. So, my question is that if I live in Colombia, then I write that my phone number here, or simply can not? Because, in fact, the does not give the possibility to

  • the pulse setting, Sandra

    Dear all, I came across a NIMath() GetPulseParameter (CNiVector & form of wave, PulseParameter & param).  I know how to handle a CNiVector data type.  My problem It is the structure of PulseParameter.  It is the structure in the CNiMath class.  Pleas

  • Not a number/path/refnum simple Boolean?

    Y at - it an easy way for not a number/path/refnum return a single Boolean value telling if the entry had NaN // any where in its structure. I have a cluster of clusters of references I want to validate but I can't find an easy way to convert somethi

  • How to change the layout of the listview in javascript?

    I need show listview two different data schemas. can I change the listview.layout of js? my code is like this: {Page 1 function aaa (type) {} if(type=="List") listschema = StackListLayout (); new StackListLayout(); on the other listschema = new GridL