Impossible to activate the widows xp after repair with another original drive is lost

Similar Questions

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• Impossible to activate the DC AA after the end of the trial period. Chatted for an HOUR and she had windows setup error. Cat then "referred to as specialist ' and chat over on that date.

  I'm a little ANGRY. I have AA X that allows me to update and buy AA DC.  I bought DC AA after the trial period.  I was unable to activate the program.  Chatted with representative for 1 HOUR. She did just what I had done on several occasions to get Adobe Acrobat DC activated and failed. She did a good job that she finally got the Windows Installer error: "this installation package would not open. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. "Now there is no way to use even the DC AA naked without the tools. Any Suggestions?

  Hi amysuet1983 ,

  Please try the steps suggested in this KB article:- wrong 1635 on a fix when installing Acrobat 8 or Reader 8

  If the problem persists please check with the other user account with admin rights to reproduce the problem, check with this article:- Troubleshooting from Adobe: create an account to administrator in Windows

  Let me know how it goes.

  Kind regards

  Christian

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Impossible to activate the update lightroom5 to lightroom6

  Hello

  There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.

  And when I ask to generate I have the not not request.

  So how do?

  Thanks for your reply.

  

  We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:

  • https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  Hi Kenneth Ofosu Barko,

  Please disable any firewall or Antivirus for now and try to activate Acrobat again.

  Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

  Kind regards

  Rahul Tyagi

  

• Using Sansung S3, not yet possible to share all the tabs opened (using NFC) with another phone NFC. But only the a main tab, I'm currently browsing is possible.

  Sansung S3 using, Android 4.1.2 Firefox 24.0; not yet possible to share all the tabs opened (using NFC) with another phone NFC. But only the a main tab, I'm currently browsing is possible to share. It is the function of current NFC function of Firefox?
  If so, when will it feature to share all the tabs?
  Thank you.

  I don't know if we implement this. Sharing of all the tabs you have open have many security and privacy issues. Someone forget that they had a tab open, they didn't want to share or miss-clicks on the sharing of all the option.

  We are looking for ways to better share tabs with devices that are located nearby. Especially if they are on the same WiFi network.

• Impossible to activate the phone after 6 s restoration

  I just restored my iphone 6s now my old apple ID does not have to activate the phone... help nicely. The same id is used several times to download the files and applications. Also, I bought this new phone.

  Is this the only Apple ID you have? You know the partial Apple ID that shows activation?

• lost password impossible to activate the phone after resetting

  in fact, my concern is, my sister-in-law gave his iPhone 4S without deleting its icloud account, when I reset the phone I can't activate it asks password of the icloud account who forget my sister-in-law and she does everything to remember the password, but unfortunately it was unsuccessful the icloud account is * and IMEI or serial number of the phone is * the unit is shipped from the United States , of the State of Alaska, is there to turn it on, can you help me to activate by removing the account or you can help me to reset the phone, what do I do? I want to use the phone, thank you very much

  There is no way to activate the phone without the AppleID and password and Apple will not bypass it. Your sister should contact technical support Apple ID in order to get the password reset. We can not help you on this forum, because we do not work for Apple.

  Contact technical support here:

  http://www.Apple.com/support/appleid/

  Click contact Support on the left.

• Impossible to activate the OEM Windows 7 after reappattage on the same machine after a disk crash

  When I buy my Mac, I was told that I could run Win 7 on a virtual machine using the Parallels application. I bought the Parallels software and an OEM Version of Win 7 Home Premium and istall and activate it without any problem. Recently, my hard drive crashed and I need to replace the hard drive and reinstall all software including the virtual machine and Win 7. I could not reactivate the Win 7 and I could not reactivate the Win 7 on the same machine.

  Their support came back with a long history to this subject and this restriction and in short to expect me to buy a version full of Windows 7 to install in Mac. Y at - it another way to activate windows because there is no phone number that I can call them and talk to them. Why OEM version is freely available and still no appropriate advice are given to the retailer t explain some limitations? Consumers like us usually bear the burden of all these issues as the purchase of a legal but copy cannot be activated and suckers feels when we were told a long string of legal things that did not communicate to us when we buy.

  Thank you

  Kenny

  It is one of the reasons why it is not a good idea to use an OEM software in virtual machines.

  You must use the activation of the operator and see if they will allow the reactivation.

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Satellite L300 - how to activate the RW function after installing xp?

  After my laptop was repaired with a new hard drive, I installed xp instead of vista.
  Now I can use the dvd rom for watching movies and install programs, but it is not accessible to any blank discs.
  The error window comes out whenever I have insert the drive empty and click the dvd rom.
  And the size of it always shows 0 bytes. CD or blank dvd-smoking works.

  Because it's a dvd/RW rom, usually I can just open and drag any file I want on the disc and then burn easily.
  I already updated the firmware driver.

  I wonder what the problem of the xp system that blocks the RW function?

  Hi mate

  Check the suggestion posted by Akuma.
  But, in addition, you can check if the write option is enabled in the ODD properties.

  For this, go to my computer-> CD/DVD drive properties (right click / Properties) registration mark called the option activate the writing of CD on this drive

  Welcome them
  Jack