Impossible to activate touch id on this ios ipad 10

Hello

I have updated my Air 2 day before iPad and from my iPad slow, battery down faster and worst of all I get this warning on the screen, (impossible to activate touch id on ipad) try to reset and add the new fingerprint, but it does not at all. It's the product of 2 years and this bad with the new iOS n slow down in case of failure.

Apple says it's best iOS, for me the worst until this iOS...

any idea anyone?

Hi Cacsh,

I see that you post today because you are having a problem getting ID of contact set up on your iPad 2 Air. I also see that you encounter some problems related to the slow-running and your battery drains faster that you expect. I would like to help with these issues.

To solve the problem you're having with Touch ID, I would recommend following the steps listed here:

  1. Make sure you have the latest version of iOS.
  2. Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
  3. Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not type too fast or move your finger.
  4. If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
  5. Go to settings > Touch ID & password and make sure the Unlock iPhone or iTunes and App Store is on and that you have entered one or more fingerprints.
  6. Try to register another finger.
  7. If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.

Use the ID Touch on iPhone and iPad - Apple Support

Regarding the slow performance issue you mentioned. have you noticed what is happening with any specific application? I would like to gain a better understanding of this issue before providing specific recommendations. To answer your concerns about the battery life, take a look at this document for more information on how to monitor your use of the battery:

On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

To get tips on maximizing the performance of your battery, take at look at this resource:

Batteries - maximize Performance - Apple

See you soon.

Tags: iPad

Similar Questions

  • IOS 10.0.2 | Unable to activate Touch ID on this phone.

    "Impossible to activate Touch ID on this phone."

    All of a sudden I had this error after upgrade to ios 10.0.2.

    All of my info stored fingerprints are more there... all gone.

    I tried to turn it on, but it keeps saying 'IMPOSSIBLE '.

    It won't let me even add new to fingerprints.

    Tried resetting but no luck.

    No matter who he meets same question?

    Sorry to hear that. I am also facing the same situation. I tried:

    -Reset

    -Downgrade to 10.0.1
    -Downgrade to 9.3.5

    None of them work

  • IMPOSSIBLE TO ACTIVATE TOUCH SCREEN

    I HAVE a HP PAVILION TOUCHSMART 21-h010.  I upgraded from windows 8.1 for windows 10 and and the touch screen is no longer available to use.   Microsft tried Tech allow the driver to activate the touch screen, but she got an unknown error and don't settle.

    Hello

    Try this...

    Turning the unit off.

    Once you press the Power On button, start typing the key F2 on the keyboard (immediately after that you reach the power button). It brings you to the hardware diagnostic Interface.

    Choose your language and goto the option that says test component. Under component Test, goto screen tactile Test and take the two tests that would give you. Let me know how comfortable you can use the touchscreen to perform the tests.

    When finished, exit the diagnostic Interface and the Windows logon, it should help.

    Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.
    Click the "Thumbs up" button to the lower right side of my post to say thank you! ***
    I am an employee of HP

  • Impossible to activate REP on 3750 x IOS 15.2

    I am a neophyte on the IOS in general, and accepted with gratitude the 3750 x in particular, so any suggestions. I am trying to configure REP on a new 3750x24P-S that has been flashed to 15.2 IOS universalK9. The message I get is 'conflict with current switchport mode '. As I do I start to wonder if this is related to the license level, that I am more research. The ipbase shows as permanent, but the ipservices always present in evaluation mode. Some of the notes I've seen here seemed to suggest that ipservices should apply because you would be able to change the settings for the port, which * might * apply here.

    I tried to accept the EULA and it seems to work, but a reboot of the switch always displays ipservices in eval mode. Subsequent attempts to accept the EULA now do nothing, as if it has already been applied. So, any suggestions as to why I can't configure my ports for REP? Other than the initial installation, the switch is now in default values.

    Thank you!

    James,

    You have configured the interface as a trunk of layer 2-

    Only trunk ports are supported.

    REP of understanding

    A segment of REP is a chain of ports connected together and configured with a segment ID. Each segment consists of the standard ports (no edge) segment and two edges that are configured by the user. A switch can have no more than two ports in the same segment and each segment can have only a single external neighbour. A segment can go through a shared medium, but on any link two ports can belong to the same segment. REP is only supported on the Network Layer interfaces 2

    Figure 24-1 shows an example of a segment composed of six ports over the four switches. Ports E1 and E2 are configured as edge ports. When all ports are operational (as in the segment on the left), a single port is blocked, the diagonal line. When there is a failure in the network, as shown in the diagram on the right, the blocked port returns to the State of transmission to limit disruptions to the network.

    http://www.Cisco.com/en/us/docs/switches/LAN/catalyst3750x_3560x/software/release/15.0_2_se/configuration/guide/swrep.html

    Kind regards
    Alex.
    Please evaluate the useful messages.

  • Impossible to activate my trial version window 2003 Server 360 days

    Impossible to activate my trial version window 2003 Server 360 days

    error: product key is not valid

    You have already posted this somewhere else - no matter where you post the answer will always stay the same - no Windows operating system has a 360-day downloadable trial available.

    FC

    http://answers.Microsoft.com/message/fcabf370-9489-4c8a-AAED-ecb578fd00ca

  • Impossible to activate winodws updates on Vista Home

    I have the question googles; tried the Microsoft fix filoe but impossible to activate Windows update

    Hello

    (1) what happens when you try to activate the update? You receive an error message?

    (2) who is the Fixit you tried?

    (3) when was the last time it worked?

    I suggest you follow these methods and check.

    Method 1: Perform the clean boot and install the updates.

    Follow the suggestions of this link.

    http://support.Microsoft.com/kb/929135

    NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

    Method 2 : Reset Windows Update components and check with the question.
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows

    Method 3: Run the system update tool and install updates.

    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    http://support.Microsoft.com/kb/947821

    If the method above does not work, proceed to the next method.

    Method 4: Perform a full scan of the computer using the following antivirus applications and try to install the updates.

    Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I hope this helps!

  • Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

    Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

    Hey daltsdad,

    It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

    8500 downloads

  • HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

    I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

    Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

    In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

    I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

    Thanks for any help!

    Hi @3star8,.

    Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

    This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

    Please let me know the result and if there is anything else I can help you. Thank you.

  • Impossible to activate the Agent FTR

    Dear all,

    I tried to activate the FTR agent but, impossible to activate it. When I checked the logs, I could see the following errors.

    "14/09/30 10:28:03.564 ECHO FATAL [Thread-40] com.quest.ftr.agent.ComMonitorThread - ComMonitorThread taken NoClassDefFoundError. Check the installation and the path of JAR files. Could not initialize class com.jacob.com.ComThread

    java.lang.NoClassDefFoundError: has not been initialized class com.jacob.com.ComThread
    at com.quest.ftr.agent.ComMonitorThread.run(ComMonitorThread.java:246)

    2014-09-30 10:28:03.564 ECHO INFO [Thread-40] com.quest.glue.core.services.AgentStatusServiceImpl - failure reported Agent
    2014 09-30 10:28:03.564 ECHO VERBOSE [Thread-40] com.quest.ftr.agent.ComMonitorThread - bridge COM out restart = false
    2014-09-30 10:28:03.564 ECHO com.quest.ftr.agent.ComMonitorThread WARN [Thread-40] - Caught throwable son freeing com could not initialize class com.jacob.com.ComThread
    2014-09-30 10:28:03.564 ECHO INFO [Thread-40] com.quest.ftr.agent.ComMonitorThread - COM monitor thread exit
    2014-09-30 10:28:03.564 ECHO VERBOSE [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - data collection to stop
    2014-09-30 10:28:03.564 ECHO INFO [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - data collection stopped
    2014-09-30 10:28:03.564 ECHO INFO [FTR AgentStatusService] com.quest.ftr.agent.FTRAgent - Agent stops collection
    2014-09-30 10:28:03.579 ECHO VERBOSE [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - agent of destruction
    2014-09-30 10:28:03.579 ECHO INFO [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance agent - destroyed"

    Could someone check and help me on this.

    Thanks in advance. :)

    Hi Renon,

    The first thing to check is that you have a 32-bit Foglight Manager Agent to run the agent FTR (even if it is on OS 64 - bit). This is a common reason for the agent to fail to start.

    From the release notes: The Foglight Transaction recorder and player are supported on 32-bit and 64-bit systems. Transaction Foglight player works on 64 bit systems only if the 32-bit version of Foglight Manager Agent is installed.

    Kind regards

    Darren

  • Impossible to activate the laptop on Windows 7 computer wireless network connection

    I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

    * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

    Hi djmoore20,

    See the following article with information and troubleshooting on your question:

    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

    Hello

    I use Oracle Database 11.2.0.4.

    After reading the documentation on how to prevent unwanted table DDL statement.

    I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

    Turn it off doesn't work, however I can not re - activate.

    The error message is:

    ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

    I want to activate the lock, because I need to add new columns to this table.

    I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

    Impossible to activate the table lock after disablng it

    ALTER table enable table lock blocking

    However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

    'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »


    By the way:

    1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

    2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.


    It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

    The table itself is located on the stops and never schema of production on which transactions take place continuously.


    Is it true that Oracle expects all execute transactions? Is it known bug?

    Why would Oracle wait as all transactions which has nothing to do with the underlying table?

    Is there no workaround solution to solve this?


    Note:

    I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.


    Kind regards


    Buntoro

    Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

    Quiesce

    --

    John Watson

    Oracle Certified Master s/n

  • I downloaded lightroom 5 for mac and it is impossible to activate a lightroom3 update

    I downloaded lightroom 5 for mac and it is impossible to activate a lightroom3 update

    The only way you would be able to improve Lightroom 3 Lightroom 5 is if you can find a version upgrade to purchase from a third-party vendor. 5 Lightroom is no longer sold by Adobe. The path to upgrade for you would be to 6 Lightroom Lightroom 3. This upgrade is available for $79 in the United States.

  • Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

    Hello

    I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

    Could you please help me, where is the problem?

    I bought licenses for the view with the composer.

    My environment are:

    2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

    4 x 4 ESX u2 (2xESX by vCenter server)

    2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

    Thank you

    You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

    You have 4 options:

    Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

    Option 2: Use SYSPREP instead of QuickPrep

    Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

    Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

    HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

    Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

    The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

    Larry

  • Impossible to activate Photoshop CS2 despite good numbers and drive

    Impossible to activate Photoshop CS2 despite the disc and the right numbers

    Please uninstall the current version of CS2 you have installed. http://helpx.Adobe.com/Creative-Suite/KB/uninstall-Creative-Suite-CS5-CS5.html

    Then go to this link and follow the instructions to download a new version of CS2 and a new series to use:

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  • Problem of gyroscope with iPhone/iPod Touch 4th generation with iOS 6

    We have built an application using AIR SDK 3.4 and are faced with questions only with this device configuration - iPhone/iPod Touch 4th generation with iOS 6

    Anyone has had similar problems. For the Gyroscope data, we use this native extension - http://www.ketzler.de/2011/11/adobe-air-gyroscope-native-extension-with-euler-angles-roll-pitch-lacet-pour-ios /

    Any help is appreciated.

    Thank you.

    Yes, the problem is that the Gyroscope consumes lots of CPU, if the update interval is set to a low value.

    We managed to solve this problem recently by using the extension of Gyroscope by Distriqt - http://distriqt.com/native-extensions#gyroscope and by setting the interval to update to SENSOR_DELAY_NORMAL (http://extensions.distriqt.com/docs/gyroscope/docs/com/distriqt/extension/gyroscope/Gyrosc ope.html #SENSOR_DELAY_NORMAL).

Maybe you are looking for

  • How to start firefox Android aurora in safe mode?

    A plugin is causing ff show a blank white page even on the settings pages. So I uninstall the plugin. How to start in safe mode and or reset ff?

  • Problems using BufferApp with Mozilla

    I try to save content I find on the internet using the mozilla browser. I have a BufferApp account, but with content buffering problems. My website http://www.5v5flag.com is a newer site, but this should not create any problems with get content for m

  • Re: Satellite L675 - restore factory settings?

    I was doing the initial installation, when we had a power cut (Finally, UPS has failed the self-test) - installation does not seem if completed correctly, so I tried to repair/installation. However, all my googling etc only led me to notice: power on

  • Tecra M7: Unable to set the screen resolution to 1680 x 1050 on external screen

    I have a M7 and a 1680 x 1050 VX2025 viewsonic monitor.I can't set the resolution for external display in clone mode or dual mode.Infact I can not get any resolution of the screen to exit the M7. I tried this in Windows XP and Vista with drivers from

  • To open a Pdf file on the second monitor

    Original title: two monitors and open filesHello!! I have now two monitors on my desktop and I want to know how I can open a PDF on the second monitor, and keep all my PDFs on the first monitor? I want to simply click in the file - on the first monit