Impossible to add RAM, Pavilion low g4-1117dx two cover screws of the Panel unscrew a point then pop.

Similar Questions

• Add RAM - Pavilion 15-p047nl

  Hello
  I'll add RAM on my laptop HP Pavilion 15-p047nl? It is not a small backdoor my last laptop has. When I buy, I asked the saleswoman if I could add ram and he replied in the affirmative.
  So, can I do it by myself without void the warranty?

  Hello:

  I also want to add that installation of memory by yourself the warranty, as the installation of memory is a procedure that can be done only by an authorized HP service center.

• Can I add ram from 1 computer to another identical to increase the ram

  can I add ram to a spare identical to another computer to double the RAM

  Hi André,.

  Yes, you can add RAM to another pc Modules to existing pc provided:

  1 RAM capacity is within the limit supported system (see your hardware / manual of the motherboard).

  2 must be of the same type and clock speed.

  I hope this helps.

• Pavilion G6-2230US: Add RAM on HP G6-2230US

  Hi all

  I have a laptop HP G6-2230US, currently with 4 GB of RAM. We know not if I add RAM to improve performance, who can say?

  Thank you

  @debutant95

  Supports the following configurations up to 8 GB:

  ● 8192 MB total memory (4096 × 2) (no support for 32 bit OS)

  ● 6144 MB total memory (4096 × 1 + 2 048 × 1) (no support for 32 bit OS)

  ● 4096 MB total memory (4096 × 2 048 or 1 × 2)

  Total system memory of ● 2048 MB (2 048 × 1).

  Maintenance and Service Guide here.

  http://h10032.www1.HP.com/CTG/manual/c03593041

  REO

• HP Pavilion 17-e071sr (F2U30EA): add RAM 8 GB laptop HP Pavilion 17-e071sr (F2U30EA)

  Hello.

  I have a laptop - HP Pavilion 17-e071sr (F2U30EA).

  It has 4 GB of RAM on Board (SO DIMM DDR3L Samsung M471B5173QH0-YK0).

  It has a free location for additional stick of RAM installation.

  Is it possible to install the additional stick of RAM with 8 GB? For example as Kingston SODIMM DDR3L-1600 8192 MB PC3L-12800 (KVR16LS11/8).

  Thanks for the reply.

  The scanner runs possibly crucial:
  
  http://www.crucial.com/USA/en/systemscanner

  The manual (page 6) refers is that you can install up to 12 GB of RAM (8 + 4), which is also alive 8GB (1x8GB).

  http://h10032.www1.HP.com/CTG/manual/c04069163

  Support up to 12288 MB RAM in the following configurations:
  ● 12288 MB (8192 MB x 1 + 4096 MB x 1), not taken in charge for use on computer models equipped with a 32 bit OS
  ● 8192 MB (8192 MB × 1, 4096 MB × 2), not taken in charge for use on computer models equipped with a 32 bit OS
  ● 6144 MB (4096 + 2048 MB), not taken in charge for use on computer models equipped with a 32 bit OS
  ● 4096 MB (4096 MB × 1)

  Following this specification and taking the original module HP 8 GB are possible to establish the equivalent of Kingston:
  
  8 GB (PC3L, 12800, 1600 MHz) 693374-00

  http://www.Kingston.com/us/memory/search/PartNumber/default.aspx?partid=693374-001

  Concerning

• Add ram touchsmart 10 10-e010nr for laptop / PC

  How can I make my TOUCHSMART from HP Pavilion 10 10-e010nr computer run faster. I have 2 GB of ram, 320 GB hard drive. I can addmore ram.

  Hi @germfree,

  Welcome to the HP Forums!

  I understand you're wondering if you can add ram to your computer laptop 10-e010nr of HP Pavilion TOUCHSMART from 10. I am pleased to see that for you!

  I recommend you to go through this guide, the computer is slow (10 of Windows). To check the amount of memory currently installed and determines the amount of memory can be added, while your computer is turned on, follow one of the sets of steps below:

  In Windows 10:

  1. In Windows, find and open HP Support Assistant.

  2. HP Support Assistant, under Learn click on product information.

     Figure: Support Assistant

     

  3. See the section of system memory specifications for details on memory that is currently installed.

     Figure: The system memory information

     

  4. To find the total amount of memory that can be added, subtract the amount of memory currently in the computer of the maximum amount of memory that the computer can hold. To see the maximum memory the computer can take, see the finding information on memory for your computer model.

  5. For the amount of memory per slot, divide the maximum amount of memory that the computer can hold by the number of memory locations of the motherboard. Usually, this is the maximum amount for each type of memory. For example, if the computer is able to contain a maximum of 4096 MB (4 GB) memory and the motherboard has four memory slots, install 1 GB (or less) per slot.

  Source: upgrade (RAM RAM).

  Also, you can take a look at this guide, Guide to Service and Maintenance.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Hope that answers your questions and have a nice day!

• Help! Can you help me solve a slow computer? Add RAM?

  I know I asked something about this before, but it has not resolved. Let me give some details of my PC a few months ago I put in my profile on this site:

  MotionLE1600tablet, Windows XP has been installed own Sept 2010, Office 2003, IE 8, update drivers & programs, Security Essentials, SyncBack SE sync my Docs with my DELL 915 - desktop PC, on my shelf programs include: Seagate Mgr BU, cCleaner, Defraggler, AdvdX Video Converter, routed Brother 7820 w / Paperport & 2700 color laser printer, the active Agent for Outlook, MS ActiveSync, Format Factory Bluetooth, REVO Uninstaller, Paint Shop Pro, Adobe Acrobat, Acronis True Image home, Advanced X Video Convert,
  From AoA Audio, ISO, Time Warner cable high speed internet, MalwareBytes AM

  So my question: this Tablet PC seems to sometimes just stop responding while using IE and trying to enter text or something else. When that happens, I can't even start with a Ctrl-Alt-Del Task Manager. It seems to ignore this and cannot do anything. I can't click on start or anything like that. So, I just finally quit and force a reboot in now the switch for a few seconds.

  Other signs of a problem are that sometimes this PC will take up VERY much time to start, but sometimes it starts very well.

  I tried to note or to explore if there could be some activity going on in the background that uses up all of the RAM (or anything... I don't know that a lot of this stuff) and I don't think that's the problem. But I'm ready to explore that if anyone could tell me how the Explorer!

  I have a few processes requiring low RAM they are running in the background for backup and changes to my Docs and they are saved on my hard drive MAXTOR One Touch USB. I also have a program called SyncBack SE that synchronizes the my Docs about this Tablet PC with those on my Dell 9150 desktop PC. All this is at home, and my tablet is never off the hook or taken anywhere. I probably just another desktop PC, since this is how it is used. I have always just sitting it here on its charging base with an external monitor, keyboard, mouse, Iomega CD/DVD-RW and MAXTOR backup hard drive hooked up to it. And it is connected to my range of colour laser printers and also my all-in-one scanner/printer/fax/copier running Paperport for scanning.

  In addition, I have add the maximum RAM in this PC recently to try to help him with this problem, but it did not disappear. He of course helped it work better. I had max RAM to www.memoryx.net/mocolectapcm.html and if you look at this page, you will see that I now have 1.5 GB which was not recognized automatically, as I thought it would be, so someone on this site taught me to solve this problem.

  So, my thought was that there is an intermittent failure was. But of course, I don't have any extra of $ just to send my tablet PC manufacturer that I bought NEW a few years ago. Mine is a LE1600 and now they show their new LE1700 to http://www.motioncomputing.com/support/support_le1700.asp. I had a serious accident a few years ago on someone's motorcycle MX and became disabled for life, and the franchise of real estate brokerage of Exit Realty I had built just after buying a franchise had to be closed. That put me off all hope for an income and he gave me $0 back on the $300,000 + that I had spent my mortgage to help put in place. And all this after I study my butt off and passed the test to win my own our Department of California real estate broker's license...         BOO HOO

  Hi Jeff has Davis,

  Method 1

  Check if the problem persists in mode safe mode with networking mode and also check the event log for errors related to the issuance and publication.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  Method 2

  If the problem does not persist in mode safe mode with networking mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the above step failure may see the items below and try the steps mentioned, check if it helps.

  How to set performance options in Windows XP

  http://support.Microsoft.com/kb/308417

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• How to add RAM to Envy 17 laptop

  How can I add RAM on my laptop 17 envy?

  It's a flag 17 t

  Serial number [personal information deleted]

  Product LW900AAR

  Windows 7 64 bit

  I t has currently 6.00 GB installed memory.

  What is the chip number?

  How can I add?

  THANKS IN ADVANCE!

  Hello

  From everything I read it seems that you have a max of 16 GB for your specific unit and if I'm not mistaken, you should have an open memory slot to expand. Here is a link to a third HP recommends for buying memory, I pulled up information for your exact unit:

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/envy-17t-3000-CTO

  Good luck

• I want to improve memory on iMac 27 in. 3.3 GHz, 5K retina. He now has two 4G of Ram. I want to add two 8 G of ram. Should I remove two 4 G, or simply add 8G in two empty slots? Going to have a mixed match (2 of 4 and 8 s 2) in trouble?

  I want to improve memory on iMac 27 in. 3.3 GHz, 5K retina. There are now two 4 G of Ram. I want to add two 8 G of ram. Should I remove two 4 G, or simply add 8G in two empty slots? There are 4 slots for RAM.  Going to have a mixed match (two 4 and two 8) in trouble? Or will it improve my speed giving me 24G of RAM?

  It will be fine as long as they are installed in pairs (and, as long as your model can handle 8 GB modules). Just install them in the empty slots. Working with word documents or online will be not much faster - you will notice the difference in speed apps to respond, with graphic design and video editing, etc or game play. The new OS versions like more RAM, so you can not go wrong there.

  FYI, you do not run iOS on an iMac - Please edit your profile to show what OS version you are using. It helps the helpers.

• Upgrade RAM Pavilion p6-2030

  Hello Forums,

  I think to upgrade my Ram on my current computer Pavilion P6-2030.

  I think with the purchase of the fury of Kingston HyperX 4 GB 1333 MHz DDr3 CL9 Dimm. (HX313C9FB/4). This will be compatible with the RAM that is already installed and it will work.

  Thank you

  You are welcome.

  Yes, that is recommended by Crucial memory should work in your motherboard.  Buy a pair will give you much better performance that I said.  If it was me, I contact their Technical Support and ask them to recommend you the best memory of what you want to do.  These guys are the experts on their memory.  I contact Technical Support for most of the components that I buy.  The components change so quickly OEMs like HP can't stay with her.  As a result, many of the newer components sold won't work even in a two year old computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pavilion p6240f: upgrade RAM, Pavilion p6240f works not

  Greetings HP community.

  Today, I'm working on a HP Pavilion p6240f. I am trying to install (2) 8 GB DDR3 1600 chips.  When I turn on the computer I hear 1 short beep and 1 long beep, which results in an error of memory.  Bought the wrong RAM?  Can I make it work?  I checked the BIOS and it seems that I have the version 5.11 of 29/09/2009 and no other version is available on the product Web page.

  Please help, thanks

  A

  Hello

  The motherboard in the p6240f is only spec'd to use 2 GB DIMM modules.

  Your first consideration should be Support HP or HP sales during the consideration of upgrades or replacement of memory. If you want to consider other manufacturers of the best way to avoid memory problems is to contact one of the leading manufacturers of memory. I would recommend that you try the tools of these manufacturers: Corsair, Kingston and Crucial. Once you have determined the DIMMs that you need, then contact commercial or technical support to check that you have selected the correct DIMMS. If you buy directly from manufacturers, then they will stand behind their products.

• "ADD RAM - ACER Aspire V3 - 112 p 11.6"

  Hello, I recently bought ACER Aspire V3 - 112 p 11.6 "(pink version). It has 2 GB of DDR3 memory, and it was written that there are 8 GB maximum installable RAM.

  I have two questions if you don't mind:

  (1) what exatcly RAM model buy to install extra RAM? Can we for example this one: INTEGRAL PC3 - 10600 DDR3 memory - 4 GB SODIMM RAM Laptop?

  (2) can I buy 4 GB and add to what I have already (2 GB) to have 6 GB of ram? Or I can purchase only 1 x 2 GB (4 GB) or 2 x 4 GB (for 8 GB)?

  (3) is there any video or description or a video of a model similar to see how to install additional ram memory in this laptop?

  Thank you for your help. Any information would be appreciated!

  Your laptop is this one and it supports up to 8 GB - DDR3L - 1600 MHz.

  The original memory sticks:

• Pavilion 15 PC laptop 15-n004TX. Ubuntu "the system is running in mode low grphics.

  HP Pavilion 15 PC laptop 15-n004TX. It came with ubuntu. 1 GB Radeon grphics card.

  I reinstalled ubuntu 14.04 completely formatted drive. After installation, on reboot, it gives the error:

  "The system is running in low graphics mode.

  Your screen, the grphics card and the parameters of the input device could not be detected properly. You must configure these yourself. »

  And then runs in the user interface of characher does not detect the usb, so I can't install the drivers.

  I tried to install ubuntu 12.04 also.

  I tried to install it in legacy mode.

  I tried using the OEM manufacturer.

  In any case the same thing happens.

  Help, please.

  I want to use my computer.

  MKM-ubuntu-req wrote:

  HP Pavilion 15 PC laptop 15-n004TX. It came with ubuntu. 1 GB Radeon grphics card.

  I reinstalled ubuntu 14.04 completely formatted drive. After installation, on reboot, it gives the error:

  "The system is running in low graphics mode.

  Your screen, the grphics card and the parameters of the input device could not be detected properly. You must configure these yourself. »

  And then runs in the user interface of characher does not detect the usb, so I can't install the drivers.

  I tried to install ubuntu 12.04 also.

  I tried to install it in legacy mode.

  I tried using the OEM manufacturer.

  In any case the same thing happens.

  Help, please.

  I want to use my computer.

  Hello

  Install Intel first, then ATI drivers...

  http://www.omgubuntu.co.UK/2013/04/Intel-release-graphical-installer-for-their-Linux-drivers

  http://www.securethelock.com/2014/04/20/installing-configuring-amdati-drivers-Ubuntu-14-04-trusty-tahr/

  BTW: as a linux user, I highly recommend to create a backup, the recovery discs before you do something like that.

• I seem to be impossible to add network and volume icons in the notification area. Both are "grayed out" in the Properties tab.

  I seem to be impossible to add network and volume icons in the notification area.  Both are "grayed out" in the Properties tab.

  Hello

  1 Please reboot nothing so interfere with this process.

  Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
  Then, use this link. Network is the same.

  How to enable or disable the system tray in Vista icons (there are several methods
  and you can to use them all).
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  If necessary: a Mr Fixit

  System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
  Restart the computer
  http://support.Microsoft.com/default.aspx/KB/945011

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• can I extend the ram up to 2 x 8 = 16 GB in the pavilion dv6-3050tx?

  can I extend the ram up to 2 x 8 = 16 GB in the pavilion dv6-3050tx?

  Hello

  The following link shows its specifications:

  http://support.HP.com/us-en/document/c02621602

  Max is 8 GB.

  Kind regards.