Impossible to apply the resource DRS settings on host.the of object has already been completely created this can drastically reduce the effectiveness of the DRS

Impossible to apply the resource DRS settings on host.the of object has already been completely created this can drastically reduce the effectiveness of the DRS

host is having above mess on summer please help on this

I found the correct solution

ESXi 5.1 U3 is the permanent fix for this issue

U3 is fix

Tags: VMware

Similar Questions

  • Impossible to apply settings of resource of DRS on host (reason: a general error occurred: failure). This can drastically reduce the effectiveness of the DRS

    We have a group of 10 hosts working ok for months. Last week, we get the error

    Impossible to apply settings of resource of DRS on host (reason: a general error occurred: failure). This can drastically reduce the effectiveness of the DRS

    on one of the hosts.

    looking to restart the hosts but not sure this could cure the problem.

    Have you tried the steps in this KB?

    Application of parameters of DRS to an ESX host generates an error (1004667)

  • I have my serial number and that you wish to register online, but the message he has already been saved. How can I solve this? We just installed Adobe Acrobat Professional on my PC

    I have my serial number and that you wish to register online, but the message he has already been saved. How can I solve this?

    This version has been installed on a server that crashed last week. We just installed Adobe Acrobat professional on my PC and it says I have 30 days to activate it.

    Hi danneels,.

    Allows you to check with the guest would ask where its giving you information 30 days. on the right corner of this window, you will see the option "software license".

    Click this option, and then it will give you register in the window, use your credentials Adobe ID then check if it works or not.

    And for the State of serial number request would ask you to go ' adobe.com/getsupport' & it launch a chat session using 'still need help contact us' after following the instructions on the screen. The representative of cat will help you with this using tools

    .

    Kind regards

    Christian

  • I have a number of VIP to order my software. The licency has already been paid. How can I download and install the software.

    I have a number of VIP to order my software. The licency has already been paid. How can I download and install the software?

    Download/install the desktop application, connect and install applications subscription.
    https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

    Creative cloud to desktop
    https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

    Sign out, sign in | Creative office cloud app
    http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

    Help of activation & deactivation
    https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

    Install, update, or uninstall applications
    http://helpx.Adobe.com/creative-cloud/help/install-apps.html

    Install creative Cloud applications
    http://TV.Adobe.com/watch/CS6-creative-cloud-feature-tour-for-video/installing-desktop-app s-of-creative-cloud.

  • When you try to activate creative cloud, I get "this code has already been used. How can I proceed with the download and installation?

    When you try to activate creative cloud, I get "this code has already been used. How can I proceed with the download and installation?

    Thanks for the Email, the problem is solved now. Please do not hesitate to contact in the future.

    Concerning

    Baudier

  • FindByIP fails with «the object has already been deleteted...» »

    I use axis2c to access VM web services. I can successfully recover a ServiceInstance a Login.

    I then try to find a virtual machine by sending the following text:

    " & lt; soapenv:Envelope xmlns:soapenv = ' http://schemas.xmlsoap.org/SOAP/envelope/ "& gt;" & lt; soapenv:body & gt; & lt; n: FindByIp xmlns:n = "urn: vim25" & gt; & lt; n: _this type = "Indexderecherche" & gt; FindByIp & lt; / n: _this & gt; & lt; n: ip & gt; 10.177.8.157 & lt; / n: ip & gt; & lt; n: vmSearch & gt; true & lt; / n: vmSearch & gt; & lt; / n: FindByIp & gt; & lt; / soapenv:Body & gt; & lt; / soapenv:Envelope & gt;

    I always get the error:

    & lt;? XML version = "1.0" encoding = "UTF-8"? & gt;

    " & lt; soapenv:Envelope xmlns:soapenc = ' http://schemas.xmlsoap.org/SOAP/encoding/ "

    ' xmlns:soapenv = ' http://schemas.xmlsoap.org/SOAP/envelope/ "

    " container = ' http://www.w3.org/2001/XMLSchema "

    " xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "& gt; .

    & lt; soapenv:body & gt;

    & lt; soapenv:fault & gt; & lt; faultcode & gt; ServerFaultCode & lt; / faultcode & gt; & lt; faultstring & gt; The object has already been disposed or was not completely created & lt; / faultstring & gt; & lt; retail & gt; & lt; ManagedObjectNotFoundFault xmlns = "urn: vim25" xsi: type = "ManagedObjectNotFound" & gt; & lt; type obj = "Indexderecherche" & gt; FindByIp & lt; / obj & gt; & lt; / ManagedObjectNotFoundFault & gt; & lt; / detail & gt; & lt; / soapenv:Fault & gt;

    & lt; / soapenv:Body & gt;

    & lt; / soapenv:Envelope & gt;

    Note that I can use the browser MOB with IP address successfully, as shown below.

    Managed object type: ManagedObjectReference:SearchIndex

    ID of the object managed: Indexderecherche

    Method: FindByIp

    ManagedObjectReference:ManagedEntity FindByIp

    Parameters

    Name

    Type

    Value

    Data center (optional)

    ManagedObjectReference:Datacenter

    ip (required)

    string

    vmSearch (required)

    Boolean

    Result of Invocation of method: ManagedObjectReference

    Name

    Type

    Value

    name

    string

    'Return value '.

    Val

    ManagedObjectReference:VirtualMachine

    VM-966\

    Any help is appreciated!

    Petwe

    Something wrong in your SOAP request. The 'object' mentioned in the fault Declaration does NOT mean the subject of the virtual machine that you are trying to perform a search by IP, but the object of the SerachIndex with which the FindByIp() method is defined.

    < n: _this type = "Indexderecherche" > FindByIp < / n: _this >

    should be

    < n: _this type = "Indexderecherche" > Indexderecherche < / n: _this >

    I'm not very sure if the value of the second Indexderecherche, maybe it's 'Indexderecherche', but you can check with the CROWD.

    The "FindByIp" must be earlier to < n: _this.

    In addition, I don't have a "n" before namespace. How do you have it?

    Steve JIN

    Author of VMware VI and vSphere SDK (Prentice Hall)

    Creator of open source (VI) vSphere Java API(tutorial, testimonials, download, samples)

    Blog: DoubleCloud.ORG ( Top 10 best practices, [common mistakes | http://www.doublecloud.org/2010/01/31/Common-Mistakes-using-VMware-VI-and-vSphere-SDK/], Tiny REST API)

    http://www.Twitter.com/sjin2008

  • Impossible to apply the resource of DRS

    The VI interface I have a yellow box on this node within a message saying:

    Impossible to apply settings of resource of DRS on the host 'XXXXX' (reason: a general error occurred: failure). This can drastically reduce the effectiveness of th DRS

    Here are my logs to vmkwarning (the end of the file):

    31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.482 cpu4:1041) WARNING: ScsiDevice: 3731: ABILITY to READ on device "vml.02000b000060060e8005488c000000488c0000074e4f50454e2d56" Plugin "legacyMP" failed. Not supported

    31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.483 cpu4:1041) WARNING: ScsiDevice: 3362: failed to vml.02000b000060060e8005488c000000488c0000074e4f50454e2d56: unsupported

    31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.483 cpu4:1041) WARNING: ScsiDevice: 3731: ABILITY to READ on device "vml.02000b000060060e8005488c000000488c0000074e4f50454e2d56" Plugin "legacyMP" failed. Not supported

    31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.484 cpu4:1041) WARNING: ScsiDevice: 3362: failed to vml.020009000060060e8005488c000000488c000007284f50454e2d56: unsupported

    31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.484 cpu4:1041) WARNING: ScsiDevice: 3731: ABILITY to READ on device "vml.020009000060060e8005488c000000488c000007284f50454e2d56" Plugin "legacyMP" failed. Not supported

    31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.484 cpu4:1041) WARNING: ScsiDevice: 3362: failed to vml.020009000060060e8005488c000000488c000007284f50454e2d56: unsupported

    31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.484 cpu4:1041) WARNING: ScsiDevice: 3731: ABILITY to READ on device "vml.020009000060060e8005488c000000488c000007284f50454e2d56" Plugin "legacyMP" failed. Not supported

    31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.485 cpu4:1041) WARNING: ScsiDevice: 3362: failed to vml.020009000060060e8005488c000000488c000007284f50454e2d56: unsupported

    31 Mai 15:06: 20 GQV00500 vmkernel: 82:05:12:21.485 cpu4:1041) WARNING: ScsiDevice: 3731: ABILITY to READ on device "vml.020009000060060e8005488c000000488c000007284f50454e2d56" Plugin "legacyMP" failed. Not supported

    2 Jun 03:01:29 GQV00500 vmkernel: 83:17:07:32.631 cpu2:1036) WARNING: FS3: 3495: status bad003f cleaning HB

    Did you try this KB

    vcbMC - 1.0.6 Beta

    Lite vcbMC - 1.0.7

    http://www.no-x.org

  • How to apply a character Style that has already been made in a document model?

    First of all, I would like to thank everyone who helps. I am a complete newbie to the script and appreciate your help.

    I mainly use GREP expressions to search for patterns in a document and apply a character Style that has already been done. This character style did not help script, but just in InDesign when the production and implementation of the model.

    var myDoc = app.activeDocument;
    
    
    //Clear the find/change grep preferences.
    app.findGrepPreferences = NothingEnum.nothing;
    app.changeGrepPreferences = NothingEnum.nothing;
    
    //Set the find options.
    app.findChangeGrepOptions.includeFootnotes = false;
    app.findChangeGrepOptions.includeHiddenLayers = false;
    app.findChangeGrepOptions.includeLockedLayersForFind = false;
    app.findChangeGrepOptions.includeLockedStoriesForFind = false;
    app.findChangeGrepOptions.includeMasterPages = false;
    
    //GREP Expression for finding all HEADERS
    app.findGrepPreferences.findWhat = ".+\n";
    
    //Applying formatting changes to put into All Caps, Bold and changing the font size to 12 pt.
    app.changeGrepPreferences.capitalization = Capitalization.allCaps;
    app.changeGrepPreferences.fontStyle = "Bold";
    app.changeGrepPreferences.pointSize = "12";
    myDoc.changeGrep();
    
    //Clear the find/change preferences after the search.
    app.findGrepPreferences = NothingEnum.nothing;
    app.changeGrepPreferences = NothingEnum.nothing;
    

    This is how I currently. I will manually define the changes made to the text. The problem is, each model uses a different set of fonts and not all use them "BOLD", for example Sabon can use THIS "BOLD".

    I would like to know how to apply a character Style and tried to look, but nothing seems to work.

    Any help would be appreciated.

    Thank you.

    app.changeGrepPreferences.appliedCharacterStyle = "A";

  • Impossible to apply the update

    Automatic updates of Windows using these 4 security updates continually fails when you try to update - KB973705 KB974554, KB972580 KB974771.
    I used the automatic Windows update successfully for years.

    I was directed DIRECTLY download each update security - individually.
    I went to-http://www.microsoft.com/downloads/en/results.aspx?displaylang=en&freetext=security%20update
    and KB973705 KB974554, KB972580 KB974771 added one at a time
    in the search engine, then downloaded successfully on my desktop.

    I tried to use each installation file, and had all the programs are closed including antivirus programs.

    Every time that crosses the entire patch update process, and then at the end, I get this error message.

    IMPOSSIBLE TO APPLY THE UPDATE

    I try next?

    Hello

    Welcome to Microsoft Windows 7 answers Forum!

    You can try the steps below and check if the problem is resolved.

    This problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and find the number.

    You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

    How to reset the Windows Update components?

    http://support.Microsoft.com/default.aspx/KB/971058

    Also, visit the following link for more reference.

    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

    http://support.Microsoft.com/kb/910339/

    Hope this information is useful.

    Thank you, and in what concerns:

    Suresh Kumar-Microsoft Support.

    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

  • the settings does not appear on my iphone 5, it has already been

    Settings does not appear on my phone, it has already been

    Hello

    The application of parameters cannot be deleted or hidden.

    You may have moved to an another home screen or in a folder.

    To search for the settings app, when you view the home screen on your iPhone:

    -Drag down on the center of the screen > in the search at the top of the screen box, type 'settings' > will display the application icon (you can open it from there) with any folder name, shown to the right of the icon.

  • My ipod 5th generation is stuck by resetting the settings and I tried holding the power and the "home" button but has just the same. Also, I tried to sync it upward, so I tunes but it has not been recognized and I can't answer on my ipod. Help, please!

    My iPod 5th generation is stuck by resetting the settings and I tried holding the power and the "home" button but has just the same. Also, I tried to sync it upward, so I tunes but it has not been recognized and I can't answer on my iPod. Help, please!

    Try the remaining shares of:

    - iOS: do not respond or does not light

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    Shop Apple Store - Genius Bar

  • receiving exception "resource requested by this task has already been used by another task' for unknown reason

    Hi people.

    I am running in a bazaar error I'm not around.  I have a series of cDAQ chassis (9188) with a number of NOR 9208 each.  Everything I'm doing is the simplest of the simple acquisition of VI to extract data from each of the 16 channels of each 9208 and push values for the configuration UI.

    NOTE: the material is SIMULATED in MAX.

    I'm trying to create a task for each 9208, but DAQmx start Task.vi bombs out after the code creates the first few tasks successfully.  The exception:

    "Error occurred 200022 DAQmx = begin Task.vi; "Possible reasons: resource requested by this task has already been reserved by another task."

    Please see the attached screenshot.  I have provided two tables of physical constants Channel. Bombs currently wired table on 'AI_Module_07 '.  The unwired table bombs on the last "AI_Module_08".  It seems that I can move these constants in the table, so there is little or no motive behind the order.

    There are also segments of screenshot of MAX and the exception in the block diagram.

    Thanks to a bouquet.

    -Chris

    Hello Chris,

    Based on the screenshot you provided, it looks like you use too many independent tasks in a single chassis - I think that the timing engine can handle three (four memory), but based on this knowledge basethree simultaneous HAVE tasks - you can certainly use all eight locations to HAVE, but they will need to be divided into synchronized subsets.

    That said, if it is in fact the problem is that I feel, a more specific error would appropriate the "resource" referred in the present case is ostensibly the timing engine, but further clarification would be useful.

    Best regards

  • Creation of the debugging token error: file has already been signed

    I nuked my PC and could not save my symbolic debugging Moose registration and got a new. I am registered with flash builder 4.6 but failed to create a new debugging token. Whenever I try (FB or from the command line) it gives me the error that the file has already been signed, regardless of what name I try to save it as. Someone has an idea what could be the cause?

    I was able to get the problem solved. Was I was using an older version of the SDK commands and again by specifying the location of the key store and let the necessary detection automatic settings worked.

  • relocation of cs5 or cs3 both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5 but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my

    My computer crashed and I tried to reinstall cs5 or cs3, both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5, but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my copy of CS3 same results. Then I tried CS2 it installs and works, but cannot activate online and the phone activation is no longer available it tells me to check the forums?

    First of all, that the software is old enough so that it does not at all with Windows 10... but

    An idea that MAY work to install or run some programs in Windows old 10

    -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

    CS2 (or earlier version) software activation server replacement

    NOTE that CS2 will not install on a Mac "modern."

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  • Add-PSSnapin: an element with the same key has already been added

    When you run Add-PSSnapin, I get the above error. This seems to happen if I try to add the snap a second time, but when this happens, none of the power CLI commands are then available up to what the server is restarted.

    Add-PSSnapin: an element with the same key has already been added.

    At C:\Windows\system32\WindowsPowerShell\v1.0\Modules\

    + Add-PSSnapin $SnapinName;

    +     ~~~~~~~~~~~~~~~~~~~~~~~~

    + CategoryInfo: NotSpecified: (:)) [Add-PSSnapin], ArgumentExcept)

    ion

    + FullyQualifiedErrorId: System.ArgumentException, Microsoft.PowerShell.Co

    mmands. AddPSSnapinCommand

    Failure of the attempts to remove the snap-in at this point with:

    Remove-PSSnapin: no Windows PowerShell snap-ins for the model

    "VmWare.VimAutomation.Core" were found. Check the pattern and then try the

    command again.

    At C:\Windows\system32\WindowsPowerShell\v1.0\Modules\

    + Remove-PSSnapin $SnapinName;

    +     ~~~~~~~~~~~~~~~~~~~~~~~~~~~

    + CategoryInfo: InvalidArgument: (VmWare.VimAutomation.Core:Stri

    NG) [Remove-PSSnapin], PSArgumentException

    + FullyQualifiedErrorId: NoPSSnapInsFound, Microsoft.PowerShell.Commands.R

    emovePSSnapinCommand

    I already tried to uninstall the dll and put it back, that makes no difference

    $dllpath = "C:\Program Files (x 86) \Vmware\Infrastructure\vSphere PowerCLI\VMWare.VimAutomation.VICore.Cmdlets.dll.

    $SnapinName = "VmWare.VimAutomation.Core".

    #get the path to instalutil

    $path = [System.Runtime.InteropServices.RuntimeEnvironment]::GetRuntimeDirectory();

    #create an alise for installtuil

    set-alias installutil (resolve-path (join-path $path 'installutil.exe'));

    #uninstall snap

    InstallUtil /u $dllpath;

    InstallUtil $dllpath;

    I tried appdomain unloading, then adding the snap-in with the same result:

    $appdomain = [AppDomain]: CurrentDomain

    $appdomain. # Of unloading | Out-Null

    Add-PSSnapin "VMware.VimAutomation.Core".

    $appdomain. Load

    Everything simply jump beyond the error is not good because it is impossible to find the following commands:

    Add-PSSnapin "VMware.VimAutomation.Core" - ErrorAction SilentlyContinue

    Get - VM $VirtualMachine

    The term 'Get - VM' is not recognized as the name of a cmdlet, function, script file, or an executable program. Check the spelling of the name, or if a path has been included, make sure the path is correct, and then try again.

    Any help to fix this would be greatly appreciated.

    Thank you

    OK, I was kind of what went wrong here.

    The snap has been loaded from a powershell module. When the module is removed and added again, the snap ceases to function, but also can not be added again.

    If the snap is loaded first outside the module everything works fine until you try never to remove or add snap-in module.

Maybe you are looking for

  • Why my iphone 4s are on the voice-over in itself?

    The first time it happened to my iphone 4s, I made an APPT at the Genius Bar because my screen would fade to black as soon as he came. They fixed, said that had been "Voice Over" in the settings. I had recently been in settings but didn't even know w

  • How to make a link inside an application

    Hello Under the default browser and chrome, you can link directly within an application using URLS special intention. For example: < a href = "myapp: / / / some / data" > open this page in my application < /a > This does not work on Firefox. Just Fir

  • Updated graphics on MacBook Pro which has the iris intel pro 1536 and the card nvidia geforce GT 750 M

    Hello world I was wondering if it would be possible to update the graphics card from nvidia, which is in my macbook pro 15-inch. Im not too tech savvy so I figure that I would like to ask the community. This laptop has the iris intel pro as well a nv

  • Re: Replace the LCD Satellite A505-S6960

    Hello I bought a replacement LCD screen for my satellite a505-s6960.I can't pull the old a.I unscrewed several screws on the bezel.However, I can't get out of the bezel. Any ideas?

  • Problems with Maxx Audio after Windows 10 'upgrade '.

    It seems I'm not the only one with this problem. I use a laptop computer Inspiron 17R 5737 provided with Windows 8.1. After upgrading to Windows 10, I noticed two things: 1. audio Dell, my Waves Maxx Audio 4 works, but miss me all my presets in the Q