Impossible to change the IP address with the local/system tool is taken automatically configured IP who has not had before

Hello

Today, I have the different situation:

Sequence:

We have 25 systems in the field with 2 links from different suppliers and working with BIO metric access. Suddenly admin changed the router's IP and network IPs to switch different range when he requested the change IPs newly given according to IP configured in router and switch. 5 systems I changed the static IP in all systems through the local administrator and tried to connect by using access biometric .i found only 10 systems took the static IP and the rest of the systems did not the. I tried thanks to rinse / renew / other commands and methods varied, but he was not taken at last I checked ipconfig and found that the ststus autoconfiguration IP service: 192.164.152.58 such as that not given earlier. After changing in ok and properties ipv4. So again see properties ipv4 value if you change the different value, but ipconfig shows that I never gave other PIS .NO updates are installed in the system. I know is questions.

Note *: when using images of backup IP address is accepted and works fine

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

If you give us a link to the new thread we can point to some resources it

Tags: Windows

Similar Questions

  • I can't change the questions to reset password also helps. In almost did not receive a letter with instructions

    I can't change the questions to reset password also helps. In almost did not receive a letter with instructions

    For a long time I don't remember creating answers to the questions that they tried to lose on the email I wrote not just the 2nd day.

    help solve the problem. I live in Ukraine. And there is no way to contact support.

    Hello! It is quite difficult to understand you.

    To reset the security questions, follow these steps:

    If you forgot the answers to your questions of security of Apple ID - Apple Support

    To have access to your forgotten Apple ID, follow these steps:

    If you have forgotten your Apple - Apple Support ID

    If you forgot your Apple ID - Apple Support password

    https://iforgot.Apple.com/appleid

    Also, take a look at this:

    On your Apple ID email addresses - Apple Support

  • Please help; Impossible to change the position of my wallpaper!

    I know this isn't a big problem; but I would like it's working properly anyway.  I tried a new image for my wallpaper, and it showed as an image full screen.  I didn't like it then, immediately, I went back to the original image, and it was too full screen.  I went to the desktop background and the position is as I've had with a frame black (I also tried other colors) around the image, but it was not of themselves.  I tried all the different positions and nothing will change.  The image will change, but any image I try is full screen.

    Hi Newsie,

    You can try the following steps and check.

    Method 1:

    You can read the following article and try the methods provided except method 6 and see if it helps.

    Impossible to change the background image in Windows 7

    Note: This article also applies to Windows Vista.

    Method 2:

    You can also try to change the theme of Windows and check.

    Change desktop theme

  • Impossible to change the themes

    original title: My Windows 7 themes.

    I work for several years in the themes of Windows 7 (PRO). Recently & I don't know exactly when, it is locked on a single page of a theme and I can't even change themes. It seems actually them is changing, but the image of the Office remains the same. I have read the forums on this and see that there has been a problem with other people but I don't see a solution.

    Steve Hoffman

    Hello

    Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, the destop wallpaper is not get changed even after changing the theme. We will analyze and identify the cause of the problem.

    1. you use any third-party program to change themes?

    2. what happens when you try to change the wallpaper manually?

    3. it worked before?

    4. are you aware of changes to the computer before the show?

    Method 1:

    I suggest that you right-click a photo file and try to change the wallpaper.

    Method 2:

    If the problem persists, I suggest you perform the steps described in the article:

    Impossible to change the background image in Windows 7

    http://support.Microsoft.com/kb/2504610

    Hope this information helps. Please reply with the status so that we can help you.

  • Impossible to change the nationality

    Impossible to change the nationality of my Apple ID because I €0.04 on it. How can I move or delete?

    See the next topic If you can't edit your iTunes Store country or region - Apple Support

    You must spend your balance before you change stores.

    If your credit is less than the cost of a single item on the iTunes Store, App Store and iBooks Store, you can Add a credit card on your account. When you purchase an item, you will use the remaining store credit and charge the rest of the purchase to your credit card.

    If you do not have a credit card, contact the iTunes Store support.

  • How to stop an application to change the time system?

    Hello

    I have an application that is affecting my time GMT system, but not the time zone.

    How to stop applications to change the time system.
    I run gpedit.msc and changed the policy of "change the time system" in person, and the request is received to change the system time.

    Help.

    Concerning
    TANIEL

    "TanielB" wrote in the new message: * e-mail address is removed from the privacy... *

    Hello

    I have an application that is affecting my time GMT system, but not the time zone.

    How to stop applications to change the time system.
    I run gpedit.msc and changed the policy of "change the time system" in person, and the request is received to change the system time.

    Help.

    Concerning
    TANIEL

    Are you sure that it is an application that is causing the problem?

    When you are connected to the Internet, Win XP will periodically synchronize with a time server.  If you have Win XP on the wrong time zone, your computer displays the local time 'bad '.

    Double click on the time (lower RH of your screen) and select the time zone tab.  Select the correct time zone for your location and check the DST box.  If necessary, change the time manually to your local time and save your changes.

    Then select the time tab Internet - and make sure that you have a server in the server field.  I use the time - a.nist.gov.  There are many alternative servers, including time.nist.gov and time.windows.com.  Click 'Update now'.

  • Response of local folders looks like the answer to the discussion group. No signature or formatting options. How can I change the local folders meets regularly?

    Please see image attached. Responses from the eyes of local folders as responses to the discussion groups. No signature or formatting options. How can I change the local folders meets regularly, as they are in the Inbox?

    I don't think that the format of replies to the messages in the local folders are linked with focus groups or to individual account settings. As local folders can contain messages between several accounts or identities, it is more likely that formatting uses the setting of the account or identity appearing in the: field when you reply.

    This is how I think it should work. How this works in practice may be different.

  • Cannot connect online after you change the settings system locale

    Hello

    Right now I have my locale Japanese system, it was originally English (United States). I can connect to the internet just fine until I have change the local back to English. Once I've got change for English I can't seem to connect online. I tried all the steps to fix the internet connection, but nothing helped.  However, if I set the locale Japanese system once again, my connection works fine as if there was nothing wrong with it in the first place.

    I must be able to connect with the English locale, so if anyone has any suggestions, I'd be very happy.

    Hello

    If connection involved any kind of ID / password etc you have to type in (or it is saved in the cache/shape) you will have to redo, or clear the cache.

    Language change can alter the charchters game and produce grabled id/pw and other identification information.

    Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

  • Change the operating system?

    Change the operating system?

    Hello

    I have few Wyse S30 thin clients with WinCE on them. Is it possible to reflash them with Linux instead? I want to be able to use them to access a Server Windows 2012, without upgrading the memory that is already on them. they have 64 MB of RAM.

    SMKEATING,

    The S30 has either 32, 64 or 128 MB of flash, so installing Linux cannot be an option because of space constraints.

  • See the other languages on win 7 without changing the settings system locale

    need to download a program in Chinese as part of my research. my system is unable to read the characters that it comes out in symbols. many have suggested to change system locale and restarting the issue. But this isn't a viable option, because the Chinese program is used as a reference point. tried to download the applocale utility, but my laptop it won't install. are there other solutions? Thank you

    Hello JKreiner,

    Thanks for posting your question on the Microsoft community.

    Thank you for your query details.

    I also appreciate the fact that you do not want to change the locale of the system.

    The "AppLocale" utility can be used to solve this problem. It is a launcher application that allows you to run applications No-Unicode(code page-based) in the regional settings of the user's choice.

    As you mentioned the "AppLocale" utility has not been installed, in order to install properly, please refer to the suggestions of Kiran Jayakumar responded on May 27, 2011.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/why-i-can-not-install-Microsoft-AppLocale-in-my/0e4b06fb-5afc-4E7F-B682-535e2d124c35

    You can download the "AppLocale" utility from this link:
    Microsoft AppLocale utility
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=13209
    (It is also compatible with Windows 7)

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Windows Anytime Upgrade, you may need to change the locale

    I'm trying to upgrade Windows 7 Home Premium to Windows 7 Professional.

    I type "Windows Anytime Upgrade" in the search field and go to the Express upgrade window.  I click "go online to choose the best product...". "and then it shows a window saying that I"might need to change the locale.  The computer is in the United States, whose English is the default location.  It will not progress beyond this screen.

    Windows Anytime Upgrade is no longer functional as it is a product of the retail, Microsoft sells more retail licenses.

    Your best option is to an Express Upgrade card for any inventory or Professional upgrade Windows 7 use the retail purchase with Anytime Upgrade from Windows 7 Home Premium product key.

    Where can I still get Windows 7?

    Version upgrade - Microsoft Windows 7 Professional Upgrade

    Microsoft Windows 7 Anytime Upgrade (Home Premium to Professional) [Code online]

    If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  • Change the local administrator passwd in a technical object of personalization

    Hello

    I would like to enter an existing CustomizationSpec and change the local administrator password before deploying a clone, but I don't want to change the stored specification or create a new.

    I tried:

    $spec = get-OSCustomizationSpec MySpecName

    $spec. ExtensionData.spec.Identity.GuiUnattended.Password.plainText = $true
    $spec. ExtensionData.spec.Identity.GuiUnattended.Password.value = 'newpass '.

    Then, I deployed a clone using $spec, but I can not connect to the clone with the new password or the original source VMs (blank) password.

    Can it be done without the help of the New-OSCustomizationSpec cmdlet?  -I'm not really a real spec created in the database that I have to delete it later, in large part because I would have to enter new credentials in the script domain user, or pull of an existing spec (don't know if it works well)

    I used PowerCLI 4.1 build 332441 U1

    See you soon

    Mark

    You will need to provide a VirtualMachineCloneSpec to the CloneVM_Task method.

    Here you can to place the CustomizationSpec, which is part of the CustomizationSpecItem.

    The following script is what you asked for.

    $vmName = "SourceVM" $vmNewName = "NewVM" $baseOSCustomizationName = "test" $newAdminPswd = "newpassword"
    
    $vm = Get-VM -Name $vmName $folder = Get-Folder -Name vm -Location (Get-Datacenter -VM $vm)
    
    $cust = Get-OSCustomizationSpec -Name $baseOSCustomizationName$spec = New-Object VMware.Vim.CustomizationSpecItem$spec.Spec = $cust.ExtensionData.Spec
    
    $spec.spec.Identity.GuiUnattended.Password = New-Object VMware.Vim.CustomizationPassword $spec.spec.Identity.GuiUnattended.Password.plainText = $true $spec.spec.Identity.GuiUnattended.Password.value = $newAdminPswd$cloneSpec = New-Object VMware.Vim.VirtualMachineCloneSpec $cloneSpec.customization = $spec.Spec$cloneSpec.poweron = $true$cloneSpec.template = $false$cloneSpec.Location = New-Object VMware.Vim.VirtualMachineRelocateSpec$vm.ExtensionData.CloneVM($folder.Extensiondata.MoRef,$vmNewName,$cloneSpec)
    

    Note that the new virtual machine is placed at the root of the data center.

  • NB200 - can I change the operating system?

    Hello.

    I have a Toshiba NB200 and Windows 7 starter.

    I would like to change the operating system, and he wanted to know who I can install in this mini portatil. Also if after changing the operating system, the warranty is lost.

    Thank you for all!

    Hey Buddy,

    Why you want to change the operating system?
    In my opinion, Windows 7 Starter is ideal for this netbook. Windows 7 is the newest operating system and the Starter Edition is designed for netbooks.

    Of course, you can install what you want and you won't lose the warranty if you install another, but Windows 7 is really good!

  • Qosmio G20: I want to change the operating system, but cannot do

    Qosmio G20: I want to change the operating system, but I can't do it.

    Please help me and I will be grateful

    Hello

    Of course, you can change the operating system and install another I wonder what OS you prefer?  :|

    I think that you can not install the new OS because the HARD drive is not visible. Am I wrong?
    Fact is that the G20 series supports RAID functionality. You must install the RAID driver before you continue the OS installation procedure

    The RAID driver can be downloaded from the European pilot of Toshiba page and should be included in the operating system using an external USB FDD drive.

    Greetings

  • I get a message saying that I don't have privileges to change the time system.

    I use Windows XP Professional as an administrator. The message is that I have enough privileges to change the time system?

    original title: time system

    As you probably understand, setting is translucent because your IT Department at work has controlled this configuration in the field (which is why I have inserted the caveat "unless the domain policy changed that").  When you exit your laptop from work to home, the domain policies remain in place.  If you do not have the administrative rights on the computer, you should always be able to change the policy by using KB266280 of my previous post... but as soon as plug you it into the network of your domain to work, the policy will return.

    HTH,
    JW

Maybe you are looking for