Impossible to change the network name to an existing network

During a recent upgrade of windows 7 to 10 the procedure at about 80% and froze with the error 8007002C - 4000D. Windows 10 not able to complete its update, the system proceeded to reinstall windows 7. Once this is finished, I found that he had lost access to internet, ipconfig address had been changed and a new unidentified network had been set up, which I'm unable to edit or delete. After spending 2 days trying to get this PC to normal with 7. I tried the 10 upgrade again, but with the same result. I can't figure out how to get my PC to Windows 7 because I don't know how I've changed the name of the network in the first problem.

To explain my network configuration of the PC with the problem Desktop which is Ethernet is connected to a router with 3 laptops wireless and a wireless printer. Laptop computer and printer seem to work fine, and the Office can see these devices but cannot connect to the internet or a network.

I fixed the IP address of the desktop computer and tried everything I can think but cannot add this PC to your existing network.

Why Windows 10 cause this problem that I'm not sure, but my main concern right now is to get this PC to its previous state.

You would be extremely grateful if anyone could offer some advice.

Thank you

Fortunately, I managed to solve the above problem.

After contacting my antivirus software company to find out if one of their customers had the same problem and the reception not good answers. I found another forum that advised people to uninstall the antivirus software and disconnect all external devices such as hard drives external, printers etc.

After following these tips Windows 10 downloaded and installed without any problems.

Hope this helps other people with the same problems.

Thank you

Tags: Windows

Similar Questions

  • LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf

    Hi everyone;

    I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).

    I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.

    I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)

    So yes, here it is...

    Anyone have any ideas on the issue?

    See you soon,.

    Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip.  On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.

  • Impossible to change the network location of the public in the network and sharing Center.

    I'm unable to change the network location of the public to the private sector or at home. In network and sharing Center, he is listed as unidentified network, and under "Public network" is written in black and is not clickable.

    I have a connection high speed (USB connected) also listed above under "Home network", it is written in blue and is clickable.

    The affected connection is an XBOX 360 connected via a network cable. I wish to connect the XBOX to the Internet via ICS, but cannot do so until this connection is either private or at home.

    Things I've tried so far;

    Reinstall the drivers,

    disconnect and reconnect, turning on all the elements concerned.

    All ideas,

    Tourist shifty.

    Enable ICS on the connection Strip and not on the XBOX 360 connection.  When you do this, the connection of the XBOX 360 will still be confused with a public network, but everything should work. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Impossible to change the network name/icon

    My PC has three available networks. One is the network of the company, the other is a network of Connectify and the third is my guest network only Virtualbox.

    The corporate network and Connectify can I change the names of by clicking on their icons in the network and sharing Center. No problem. But for the network Virtualbox Host-only, I can click on the icon, but I can't type a different name, do not choose a different icon. The text box for the name is read-only, and there is no button 'choose icon '.

    Why?

    Virtualbox Host-only networking is currently showing as 'Unidentified network - Public network' with a bench icon. I don't want that, because it is incorrect. It's actually a * very * private network, nothing public about it, so I wanted to change his name at least.

    Why inappropriate?

    How can I qualify?

    Thank you!

    Hello

    The question you posted would be better suited to Windows 7 IT pro community.
    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  • Impossible to change the display name - Bug?

    For the last few weeks, I was able to change my display name. I currently have an invisible name. When I try to click where my name would be to change it, there is nothing there to click. It's for Skype Desktop, I tried on the Skype web and mobile application to change my name, but nothing works.

    Any help is appreciated.

    See you soon

    HS

    Hello

    You can modify you profile - first name and last name that make up your display name in the customers - in my account. Simply log in with your credentials of Skype and go to "Edit profile." Here's a guide: https://support.skype.com/en/faq/FA12314/how-do-i-update-my-skype-profile-information

  • Impossible to change the network of public

    original title: fixit 50725 stuck in public mode... DOES NOT WORK

    Updated my vista dell desktop computer to 7.  have been ethernet lan network wireless work, well, I have created will only display in public mode and is immutable.  have run the fixit 50725 automatically and manually... makes no difference.

    Network and sharing Center shows both my local network and my network 'public' as having access to the internet.  my hp laptop (also 7) shows connected to the 'home' network, but without access to the internet.

    How can I fix it?  is there a fixit more better?

    Thank you

    MEW

    Hello

    After my exhaustive research and comprehensive help... patches did not work.  What? ... I went out and bought a cheap router... plugged into the LAN and I'm in business.

    In retrospect, being a great master says: "If the Microsoft software you went down... rely on third party material to solve the problem."

    Thank you all.

  • Change the computer name in the network discovery, view old and new names and get error code 0 x 80070035

    I changed the computer names of computers each with windows 7 and a home network sharing. Network discovered each poster now the old and new names. I also have an error code 0 x 80070035.

    How can I get rid of the old names?

    Hello

    Are you able to access computers using the names?

    Step 1: Check out the link to learn how to delete the old name and create a new name:

    Change the name of your computer:

    http://Windows.Microsoft.com/en-us/Windows7/change-your-computer-name

    Step 2: Refer to the section below for more information to correct the error 0 x 80070035 and steps.

    Open the homegroup troubleshooting utility

    http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

    Error 0 x 80070035 appears if you are not able to access the network computer. Follow the instructions in the thread below if you are faced with a similar question:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-error-0x80070035-when-trying-to-share/d8168c72-D51C-41C3-8B8F-3b6bb7f65f43

    It will be useful.

  • Impossible to change the name of the Table in figures

    I'm unable to change the title of a table, when I change the title name and press on enter it reverts to the original title. I tried to click away and save the document, but both go back to the original title. The only way to work is, it seems if the option a table a few times then start trying a new title.

    This can happen when you have a table with the same name on the same sheet.  Numbers of refuses to accept the name "double".  Check the names of the tables on the al sheet again.  One way to do that is to click the right part of the tab "" at the top with the sheet and inspect the table names in the drop-down menu that appears.

    SG

  • stop the warning to change the host name

    I continue to be careful:

    Your computer name is already in use on this network. the name has been changed...

    I click ok and keeps coming back with many more and will not stop!

    Thank you

    This is the share name that is duplicated on another device on the network, or the name of VICTORIES under the Ethernet settings. Both are in system preferences.

    Under network, click the network connection you are using (wired or wireless). Click the Advanced button, then the WINS tab change the NetBIOS name to something else. Click OK. If it is active, click on the button apply.

    If that doesn't help, click on the share icon. Change the computer name to something else. This is necessary, or even do anything if at least one of the options of sharing is checked.

  • Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

    Original title: network path was not found

    HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

    Hi gauravadavadkar,

    Thanks for posting your query in Microsoft Communities. Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         What is the full error message?

    ·         Work on a domain?

    Follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with networkand check if the problem persists.

    S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Startand then click run.

    (b) type msconfigand click OK.
    The System Configuration utility dialog box appears.

    (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

    (d) when you are prompted, click restart to restart the computer.

    Method 3: Follow the steps in the article.

    How to troubleshoot a network home in Windows XP

    In Windows network connection issues

    You can read this article for more information:

    Windows wireless and wired network connection problems

    I hope this helps. Let us know if you need more assistance.

    Thank you.

  • How to change the SSID name of the computer to be Compatible with the new name SSID router

    Need to change the default name of the SSID router and then reconfigure adapters wireless in each PC to be compatible with the new router SSID.  A PC has Windows XP Home Edition Version 2002 Service Pack 3 and the other Vista Home Premium.  What are the steps to change the SSID on each PC?  Your response will help complete a home network wireless system.  Thanks in advance.

    Hello

    Your computers use the SSID of your router - sound essentially its name.

    Check this box:
     
    Setting up a wireless router with Vista
    http://www.ehow.com/how-does_4899098_setting-up-wireless-router-Vista.html

    If necessary:

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    Setting up a wireless router with Vista
    http://www.ehow.com/how-does_4899098_setting-up-wireless-router-Vista.html

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • To change the host name of the device WAE

    If I want to change the host name of one of the WAE machine in my network, can I just rename it through Central Manager GUI? It is possible through CLI as well? Would the database of this device kept in CM by the change of host name?

    Thank you!

    Joe

    Hey Joe,

    You should be able to change it without any impact. In her change CM. the WAE you want to change. In activation select left pane and change the name to what you want it to be and click on submit. I would like to know if this is the information you were looking for? In her change CM. the WAE you want to change. In activation select left pane and change the name to what you want it to be and click on submit.

    Kind regards

    Kanwal

  • How can I change the user name and password

    I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

    However I don't know how to change the user name and password.

    I would also like to know how it works?

    We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

    If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

    The default user name and password so that the robot is root/vmware"."

  • TB change the sender name to my name to email classic. Fritz! Box send a pushmail with the name "Fritz!" Box '. In the Inbox of my ISP of this name is present. ...

    TB change the sender name to my name to email classic.
    Fritz! Box send a pushmail with the name of the sender "Fritz!" Box' to my standard email address.
    In the Inbox of my ISP of this name is present. Get this mail with TB the name "Fritz!" Box"is changed in lastname, firstname. This is the full name of my standard email address as I stated in my address book.

    In the toolbar > Options > view > advanced and turn off "see the show only the names of the people in my address book."

  • Impossible to change the nationality

    Impossible to change the nationality of my Apple ID because I €0.04 on it. How can I move or delete?

    See the next topic If you can't edit your iTunes Store country or region - Apple Support

    You must spend your balance before you change stores.

    If your credit is less than the cost of a single item on the iTunes Store, App Store and iBooks Store, you can Add a credit card on your account. When you purchase an item, you will use the remaining store credit and charge the rest of the purchase to your credit card.

    If you do not have a credit card, contact the iTunes Store support.

Maybe you are looking for

  • Satellite L300: How to use a partition of data for my documents

    Hello the Sat L300 160 GB hard drive is partitioned into vista and data.I want to save a large number of photos in my documents, which is on the part of vista.This example uses only half of the road. How to use the data for my documents component? TI

  • IdeaPad Z470 Wifi Fn key no longer works after upgrade to Windows 8

    Hi all, I recently upgraded my ideapad Z470 to Windows 8, however, after the upgrade, seems the function key to not activate the wifi/bluetooth no long work, when I press the function (Fn + F5) key, it just would not bring up the software switch let

  • H8-1214 graphics card upgrade problem

    I have Pavilion h8-1214 and problems for the upgrade of the GPU.  I first tried an EVGA 750-ti, who could start on the HP splash screen, and then go no black and go further.  After a bios update and communicating with EVGA, said that the card would n

  • How to use NI 9871 in scan mode?

    I have a controller OR cRIO-9024 and a module NI 9871. I have set it up as the following link. http://digital.NI.com/public.nsf/allkb/16989C708E5AF2C1862578A90067D9DC Can I use the VISA Write.Function, Read VISA service to communicate with the device

  • There was an internal error and Internet Explorer is unable to print this document

    Original title: printing problem: I have a Dell AIO 810 and HP computer with windows 7. I have a Dell AIO 810 and HP computer with windows 7. I installed the driver from Dell, but get the following message when you try to print. "There was an interna