Similar Questions

• Impossible to change the nationality

  Impossible to change the nationality of my Apple ID because I €0.04 on it. How can I move or delete?

  See the next topic If you can't edit your iTunes Store country or region - Apple Support

  You must spend your balance before you change stores.

  If your credit is less than the cost of a single item on the iTunes Store, App Store and iBooks Store, you can Add a credit card on your account. When you purchase an item, you will use the remaining store credit and charge the rest of the purchase to your credit card.

  If you do not have a credit card, contact the iTunes Store support.

• Please help; Impossible to change the position of my wallpaper!

  I know this isn't a big problem; but I would like it's working properly anyway.  I tried a new image for my wallpaper, and it showed as an image full screen.  I didn't like it then, immediately, I went back to the original image, and it was too full screen.  I went to the desktop background and the position is as I've had with a frame black (I also tried other colors) around the image, but it was not of themselves.  I tried all the different positions and nothing will change.  The image will change, but any image I try is full screen.

  Hi Newsie,

  You can try the following steps and check.

  Method 1:

  You can read the following article and try the methods provided except method 6 and see if it helps.

  Impossible to change the background image in Windows 7

  Note: This article also applies to Windows Vista.

  Method 2:

  You can also try to change the theme of Windows and check.

  Change desktop theme

• Can I change the root password in VoP Server Explorer?

  Hello

  I was encouraged to see VoP Server Explorer, but my network does not have any system to have a default root password. Can I change the root user password?

  Thank you!

  Jennifer Flanagan

  Altogether.  Just connect to the console as root and type 'passwd' to change the root password.  Be sure to keep track of what you set, because there is little recourse except in single-user mode if it goes astray.

• Cisco VCS: You can change the root within the TSH Admin password?

  I know you can reset password "admin" to root, by running the tsh, but you can change the 'root' password in the 'admin' tsh?

  Hi David,

  No you can not change it until and unless you follow the documented procedure to reset the password using console.

  However, you can go to t-root shell using the command 'tsh' and set up a new admin account, then log into the VCS GUI admin with new administrator and reset the password for the default Administrator account.

  Thank you

  Alok

• Impossible to change the themes

  original title: My Windows 7 themes.

  I work for several years in the themes of Windows 7 (PRO). Recently & I don't know exactly when, it is locked on a single page of a theme and I can't even change themes. It seems actually them is changing, but the image of the Office remains the same. I have read the forums on this and see that there has been a problem with other people but I don't see a solution.

  Steve Hoffman

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, the destop wallpaper is not get changed even after changing the theme. We will analyze and identify the cause of the problem.

  1. you use any third-party program to change themes?

  2. what happens when you try to change the wallpaper manually?

  3. it worked before?

  4. are you aware of changes to the computer before the show?

  Method 1:

  I suggest that you right-click a photo file and try to change the wallpaper.

  Method 2:

  If the problem persists, I suggest you perform the steps described in the article:

  Impossible to change the background image in Windows 7

  http://support.Microsoft.com/kb/2504610

  Hope this information helps. Please reply with the status so that we can help you.

• Change the root context of Service Web EJB

  Hello
  I can't change the default context for a Service of Web EJB Stateless root. I tried to use the @WLHTTPTransport but it says that it is not possible to use JAX - WS Web services. Also I tried to use the jwsc ant task, but it gives just a java.lang.UnsupportedOperationException with no other clues. I should change the root of the web service in production context without having to recompile the application, so I do not think that the Ant task will suffice. I would not find any similar funcion as the < context root > EJB ones web Modules. I am using Weblogic 11 GR 1 material (10.3.2.0). Any help will be greatly appretiated!
  Thank you!

  You can override the root of context using values in the weblogic EJB - webservices.xml. Here's a sample:

  
  
  
  SimpleEjbService
  JAXWS
  
  SimplePort
  
  jaxwsejb_contextPath
  / SimpleEjbService
  
  
  
  

  If you do not have an existing weblogic - webservices.xml to change, you can use jwsc to create one using the generateDescriptors = "true" attribute on the element.

  -Ryan

• change the root of the server to the external directory

  I'll put up our dev server. to imitate our production file system. To do this I need to change the root of the server at C:/sites Web/xxxxx /. How is this fact by using the webserver built into CF7? I don't know how to change the relative to the wwwroot folder root.
  
  

  Here is the real answer

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=tn_19400&sliceId=1

• Change the root password interactively

  Hello
  I want to change the password of root interactively using a configuration script, where I change many more parameters, without specifying the new root password in the configuration script.
  I would like the script to give me a chance to type the password to myself.
  Something like when you started a new cmd session in a .bat script using the cmd /c
  Thank you

  Take a look at this script and see if the way they work for you: http://communities.vmware.com/thread/412623

• Impossible to change the path for the shared virtual machines

  Hello

  as long as user root, in the Preferences menu, shared, VMs when I change the location and

  (1) push apply 1 time, the path is created in the right place on the hard drive but when I want to share a virtual machine and move toward this path, the default path is the default: / var/lib/vmware... not the one created by the menu setting.

  Cannot change the location for the shared virtual machines.

  (2) push apply several times: odd error menu

  

  OS: Linux mandriva 64

  Any ideas?  Is this a way to manually change the path in a config file?

  Best respect

  Out of work station - stop pass.
  Then edit datastores.xml - don't know where the files on Linux - I expect it be in/etc/vmware/hostd or something like that

• Change the root password

  Hello!

  I would like to change the password to root for our ESX 4.0 servers. Problems or advice?

  Unless you actually use the root connection in some application or script, and the saved password here - no problems.

  ---

  MCP, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Try to change the root directory in built-in Server

  I run the server integrated into ColdFusion 9 to test a web site that I am building. My site is located in a subfolder of the folder wwwroot directory ColdFusion9 (C:\ColdFusion9\wwwroot\Everett\*). I try to use links relative to the root, but I would like that they refer to this directory, not the wwwroot directory. For example, I would like the link "/ index.cfm" to open the C:\ColdFusion9\wwwroot\Everett\index.cfm as opposed to C:\ColdFusion9\wwwroot\index.cfm. It is my understanding that this is possible through the virtual mapping.

  I added this code in the jrun - Web.xml file in the WEB - INF directory:

  <>virtual-mapping

  > resource path < / * < / resource-path >

  < path system - > C:/ColdFusion9/wwwroot/Everett / < / path system >

  < / virtual mapping >

  Then I moved folders CFIDE and cfdocs in the Everett subfolder.

  Then I restarted the ColdFusion server.

  Now I get the following error message:

  404

  java.io.FileNotFoundException

  at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:94)

  at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)

  at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)

  at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)

  at jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)

  to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:320)

  to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:428)

  to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:266)

  at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

  When I go to http://localhost:8500 / I can see all of the appropriate files and directories, so I can see that the root directory has been changed, I'm simply not view any document.

  Any thoughts?

  Jeremy

  HA! I don't know why it works now, but it does. Alexander, I tried your method and it did not work, but then I moved the directory WEB - INF back to wwwroot and he's fine now. For those keeping score at home, here's what I've done with:

   

      /*

      C:/Web_Sites/Everett2

   

  


   

      /WEB-INF

      C:/ColdFusion9/wwwroot/WEB-INF

   

  


   

      /CFIDE

      C:/Web_Sites/Everett2/CFIDE

   

  As I said, I don't know why it didn't work the first couple attempts, but it works now and I guess that's all that matters. Thanks for all your help!

  JAW

• Impossible to change the title of the document when the browser is opened in mode of dialogue

  Hello experts,
  
  I'm working on a solution that is to open another .jspx dialog page. I need to change the title of the browser dialog window dynamically when the user performs a specific action on the page of the dialog box.
  
  Unfortunately, I can't get this to work. I tried to use JavaScript and not had much luck. I tested this technique on a dialogue page and it works fine. Help, please.
  
  Here's the markup code for the launch of the dialogue page:
  < af:activeCommandToolbarButton id = "actbPreview".
  Icon="/graphics/previewscreen_enabled.gif ';
  Text = "Preview".
  action = "dialogue: weCreate.
  useWindow = 'true '.
  windowHeight = "620".
  windowWidth = "1120".
  Disabled = ' #{empty links. " MapElemUnqId.inputValue}.
  launchListener = "#{backing_weQuery.launchPreviewerListener} '"
  Binding = "#{backing_weQuery.actbPreview} '"
  returnListener = "#{backing_weQuery.returnPreviewerListener} '"
  clientComponent = 'true '.
  windowModalityType = "applicationModal.
  windowEmbedStyle = 'window '.
  disabledIcon="/graphics/previewscreen_disabled.gif";/ >
  
  On the dialog page, here is the markup and javascript to set the title of the browser window:
  < af:commandButton text = "title" id = "cb10" >
  < af:clientListener = "setWindowTitle" method
  type = 'action' / >
  < / af:commandButton >
  
  function setWindowTitle (actionEvent)
  {
  actionEvent.cancel ();
  var doc = AdfPage.PAGE.findComponent ("d1");
  doc.setTitle ("TEST");
  Alert ("title =" + doc.getTitle ());
  }

  I could see a possibility, the document could be in an iframe, try to check the generated HTML structure. If so, try to go to the top of the DOM of the document root tree of the popup and set the title on that one instead.

  Kind regards

  ~ simon

• Impossible to change the password of COMMENTS

  Hello
  
  I'm trying to change GUEST password by editing the context file (s_guest_pass) and then running the autoconfiguration service.
  If automatic configuration is done correctly the log file has errors such as
  
  Impossible to update GUEST_USER_PWD in the database for the COMMENTS/NEWPASS - unable to access the ORACLE application password
  
  Cause: Object Library Application could not access your ORACLE password.
  
  Action: Contact your technical support representative.
  Impossible to update GUEST_USER_PWD in the database for the COMMENTS/NEWPASS - cannot access password ORACLE application.
  
  (Note: the above messages are generated when the autoconfig call adgendbc)
  
  Also both the sql ' select fnd_web_sec.validate_login ('GUEST', 'NEWPASS') from dual;
  
  "select fnd_web_sec.validate_login ('GUEST', 'ORACLE') from dual;
  
  returns N.
  
  Which means that the password of COMMENTS is not changed.
  
  I checked the dbc file and profile GUEST_USER_PWD option, two of them have the new password.
  
  If I go back the password (i.e. reset s_guest_pass to ORACLE), autoconfig succeeds with no message and the SQL ' select fnd_web_sec.validate_login ('GUEST', 'ORACLE') from dual; "returns"Y ".
  
  Can you please advice if Miss me something?
  
  Appreciate your help
  
  Thank you
  Nikhil

  Hello

  What is the version of the application?

  If you have followed the steps as stated (how to successfully Change The Guest password in E-Business Suite 11.5.10 and R12 [443353.1 ID])? If so, please see if these documents help.

  Cannot change password user comments in the Oracle 11.5.10 Applications [ID 316277.1]
  After upgrade to Atg_rup6, we are not able to change the password of user comments [ID 553083.1]

  Thank you
  Hussein

• Impossible to change the tempo of scrolling

  With the update, I can't change the speed of my trackpad srolling. I have a MacBook Pro 2013.

  This occurs is safe mode? Try safe mode if your Mac does not commissioning - Apple Support Do you receive an error by any chance?