Impossible to change the working directory
I'm trying to change the working of a computer virtual directory so that snapshots are stored in a different data store.
I used the following two articles for instruction:
"Create snapshots in a different virtual directory default location"
"Record or adding a virtual machine to inventory".
I recorded my VM. I added the following line to my .vmx:
workingDir = "/ vmfs/volumes/4cb6d8b0-45f1b122-3a3a-d48564535eca/vm-snapshots.
This has been copied directly from management. The only thing I changed was the part of the path that identifies my data store.
Note: I also tried to use 'vmsnapshots' to ensure that the hyphen was not my problem, but I got the same error message.
I recorded my VM. I have no problem adding the .vmx inventory. When I right click on my VM and go change the settings > Options, the workplace of VM looks OK. 4cb6d8b0-45f1b122-3a3a-d48564535eca translated correctly to the identifier for the data store (it looks like this: [DL360G7DS1] vm-snapshots /). I turned on my virtual computer. I get the following error message:
"This virtual machine cannot be turned on because its working directory is invalid. Use the configuration editor to define a valid working directory and then try again. »
I didn't know if the "vm-pictures" directory would be created automatically or if I have to create it, so I tried both ways. There is no space in my path name or a folder. I had not changed anything else in my .vmx and when I remove the line workingDir, VM powers on without problem.
There is a good chance I'm missing something simple here. The path seems to be accepted and pointing in the right direction. I don't know what I have to do to "vm-shots" to make it valid. The instructions didn't about the requirements for this directory.
Any advice would be greatly appreciated. Please let me know if I does not provide enough information or if the rest of my .vmx file should be displayed.
I would just put the hard in the home folder of the new virtual machine after I have it create?
From what I understand so far, there is not enough free disk space on the data store "2MB" to host the virtual machine! If there is enough free space on the disk so you can just migrate the virtual machine in this data store using vCenter Server. If there is not enough disk space, you can create a new virtual machine on the data store "2MB" and leave the virtual disks on the data store '1 MB' for now. Just make sure that you document it (for example in the annotations of the virtual machine) If you don't accidentally delete the old folder with the the.vmdk file.
André
Tags: VMware
Similar Questions
-
Hello
I want to automatically change the working directory of the node Mathscript in a VI in the working directory of the VI, while I don't have to specify every time where is my file ".m", as most likely, it will be in the same folder as the VI.
Thank you
Walid F. van
Hi Wade,
The following picture illustrates how to add the directory to your VI to MathScript search paths.
-
Please help; Impossible to change the position of my wallpaper!
I know this isn't a big problem; but I would like it's working properly anyway. I tried a new image for my wallpaper, and it showed as an image full screen. I didn't like it then, immediately, I went back to the original image, and it was too full screen. I went to the desktop background and the position is as I've had with a frame black (I also tried other colors) around the image, but it was not of themselves. I tried all the different positions and nothing will change. The image will change, but any image I try is full screen.
Hi Newsie,
You can try the following steps and check.
Method 1:
You can read the following article and try the methods provided except method 6 and see if it helps.
Impossible to change the background image in Windows 7
Note: This article also applies to Windows Vista.
Method 2:
You can also try to change the theme of Windows and check.
-
Impossible to change or add directory enteries on phones smart blackBerry bold 9000
Impossible to change or add directory enteries on 9000 "BOLD"
IF you have improved last week your MSN/Live, AIM, Gtalk or Yahoo Messenger application, remove applications for upgrading your device.
Your address book will not work. -
Impossible to change the themes
original title: My Windows 7 themes.
I work for several years in the themes of Windows 7 (PRO). Recently & I don't know exactly when, it is locked on a single page of a theme and I can't even change themes. It seems actually them is changing, but the image of the Office remains the same. I have read the forums on this and see that there has been a problem with other people but I don't see a solution.
Steve Hoffman
Hello
Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, the destop wallpaper is not get changed even after changing the theme. We will analyze and identify the cause of the problem.
1. you use any third-party program to change themes?
2. what happens when you try to change the wallpaper manually?
3. it worked before?
4. are you aware of changes to the computer before the show?
Method 1:
Method 2:
If the problem persists, I suggest you perform the steps described in the article:
Impossible to change the background image in Windows 7
http://support.Microsoft.com/kb/2504610
Hope this information helps. Please reply with the status so that we can help you.
-
I created the Package CC "exsample" series of license name and disabled the Office CC Implementation Committee and selected the option "specify directory for deployment" or 'Directory to specify' in the Advanced dialog configrations.
I started to deploy in the victory of the client PC with command line like below,
msiexec /i exsample.msi TARGETDIR = D:\test
or
msiexec /i INSTALLDIR = D:\test exsample.msi
Installation was completed though, apps had been installed in the defalt directory "C:\Program files".
In CC helps Packer said as the folliwings on the location of the Installation,
"The Application Manager offers you the following options for the deployment location:
Deploy in the default directory of the application: the player is by default the system unit; the default path is \Program Files in Windows/applications under Mac OS.
Specify the directory for the deployment: allows users to end to specify the installation path when the package is deployed. On Mac OS, users are invited on the user interface, while on Windows, it's a command-line only option.
' Specify the directory: enter the path to the location to a specific installation location.
Is - this explanation is wrong?
How can I change the installation directory in windows PC where to deploy the package to the series of licenses?
Any information would be appreciated.
Thanks in advance.
Kappa-maki
My friend told me that the correct command is as below,
MsiExec.exe /i example.msi ADOBEINSTALLDIR = "D:\test\" / quiet
It worked well!
-
Creating cloud - BUG change the installation directory for applications
I searched and could not find this similar post here
Who stated the issue I am experiencing. In the program office cloud creative preferences, I changed the D drive installation directory because I have my main hard drive partitioned and programs would take too much space on C. Whatever the change in preferences, applications were still installing on my C drive. I tried to restart and reinstall and nothing seemed to work.
Finally, I decided to reassign my D partition to C, I must still complete this because I'm waiting for all the data on D to be transferred to an external drive, so I can recombine it in C without losing any data (I don't know if this is necessary, I have not recombined partitions in the front operating system (, but just to be sure)
IN ANY CASE
As I am awaiting transfer (more 120gbs takes a while) I changed the installation directory in the preferences of creative cloud to C and went ahead and installed the program I wanted to before all this. Guess what? It is installed on my D drive!
This isn't a serious bug for me, just incredibly boring and causing a lot of extra work on my part just to install the program I wanted to. However for someone who requires a different install directory to and cannot reorganize their computer to take account of this bug, I could see that she is more serious. If anyone else has had this problem and found a solution? Thank you.
Adobe PS rock you, I hope that your other programs CC feel not hurried to immediate as does your Installer
Thanks for the update Julie. It is information that you have been able to install applications for the location on the D: drive. Shared resources and temporary installation files will continue to be on the C: drive. Please maintain enough disk space on your drive to allow installation of the necessary updates. In general, I'd recommend at least having double the amount of free space on your system drive, to the amount of physical RAM, you have installed on the computer.
You can find the system requirements for Adobe applications, and an indication of the disk space required for installation, system required. Creative cloud.
-
Impossible to change the nationality
Impossible to change the nationality of my Apple ID because I €0.04 on it. How can I move or delete?
See the next topic If you can't edit your iTunes Store country or region - Apple Support
You must spend your balance before you change stores.
If your credit is less than the cost of a single item on the iTunes Store, App Store and iBooks Store, you can Add a credit card on your account. When you purchase an item, you will use the remaining store credit and charge the rest of the purchase to your credit card.
If you do not have a credit card, contact the iTunes Store support.
-
Where can I change the default directory for file printing?
Currently, the file is placed in the Mozilla Firefox directory under program files directory. I want to change the default directory.
Hi Tai4firefox, you wrote:
This is not resolved because I do not know where to change the default directory.
You can't do that without changing the code of Firefox program. Then you should consider other options.
-
How can I change the target directory for NOR-DAQ 6.9.3?
I try to install NOR-DAQ 6.9.3 on a new laptop computer. I tried to change the target directory, but the installer does not allow me to change it. Is it possible to change the directory?
When you say that the installation program does not let you change the directory target, you receive an error? In my view, is it possible to change the target directory by selecting the feature in the feature tree, then by manually changing the target directory to the bottom of the installer. When this is done, a pop up will occur who says a new folder will be created to save the files to.
-
How to change the default directory names in Vista?
I want to change my default directory:
'C:\Documents and Settings\
\My Documents' to 'C:\Documents and Settings\ \My Documents. Hi kdukes1,
There is no way to change the default directory of the user account name you mentioned since it is the design.
-
How can I change the work plan
How can I change the work plan
Can you explain more? What is changing? You can use the move tool V to move the artboard, it is the tool of workplan under the move tool, which can change the size of the artboard. Move the tool will move back if you try to move a work plan or if you try to change its size.
-
Need to change the ORACLE_BASE directory
Hello
Network infrastructure (software only), I installed RHEL5 n 11.2.0.3.
When the installation is complete, I realized I didn't give the right directory for ORACLE_BASE.
In the directory that I gave to the installer, a directory named "checkpoints" appeared.
Can someone give me the process to change the ORACLE_BASE directory after installation (software only)?
For more information, I found references in the configuration file 3:
grep - r "ORACLE_BASE is < ORACLE_BASE >." / *
./bin/racgwrap:ORACLE_BASE= < ORACLE_BASE >
./CRS/install/crsconfig_params:ORACLE_BASE= < ORACLE_BASE >
./install/envVars.properties:ORACLE_BASE= < ORACLE_BASE >
Thank in advance for help you.Use the mv command and be sure to make the necessary changes in the .profile file so that when you open a session peak $ORACLE_BASE always to the new directory.
because the operating system is Linux, you can use softlink (similar as synonyms in the database), use, it solves half of your problem.
MV
-
Try to change the root directory in built-in Server
I run the server integrated into ColdFusion 9 to test a web site that I am building. My site is located in a subfolder of the folder wwwroot directory ColdFusion9 (C:\ColdFusion9\wwwroot\Everett\*). I try to use links relative to the root, but I would like that they refer to this directory, not the wwwroot directory. For example, I would like the link "/ index.cfm" to open the C:\ColdFusion9\wwwroot\Everett\index.cfm as opposed to C:\ColdFusion9\wwwroot\index.cfm. It is my understanding that this is possible through the virtual mapping.
I added this code in the jrun - Web.xml file in the WEB - INF directory:
<>virtual-mapping
> resource path < / * < / resource-path >
< path system - > C:/ColdFusion9/wwwroot/Everett / < / path system >
< / virtual mapping >
Then I moved folders CFIDE and cfdocs in the Everett subfolder.
Then I restarted the ColdFusion server.
Now I get the following error message:
404
java.io.FileNotFoundException
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:94)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:320)
to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:428)
to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
When I go to http://localhost:8500 / I can see all of the appropriate files and directories, so I can see that the root directory has been changed, I'm simply not view any document.
Any thoughts?
Jeremy
HA! I don't know why it works now, but it does. Alexander, I tried your method and it did not work, but then I moved the directory WEB - INF back to wwwroot and he's fine now. For those keeping score at home, here's what I've done with:
/* C:/Web_Sites/Everett2 /WEB-INF C:/ColdFusion9/wwwroot/WEB-INF /CFIDE C:/Web_Sites/Everett2/CFIDE As I said, I don't know why it didn't work the first couple attempts, but it works now and I guess that's all that matters. Thanks for all your help!
JAW
-
With the help of deployment plan to change the virtual directory mapping
Hi all
Have anyone tried this before?
I have a deployment plan to add the virtual directory to my descriptors of weblogic as follows:
Inside tag <>variable-definitions:
Then, to add the virtual directory to weblogic.xml in:<variable> <name>LocalPath</name> <value>C:/</value> </variable> <variable> <name>VirtualPath</name> <value>/Temp/*</value> </variable>
But I have this error:<module-descriptor external="false"> <root-element>weblogic-web-app</root-element> <uri>WEB-INF/weblogic.xml</uri> <variable-assignment> <name>LocalPath</name> <xpath>/weblogic-web-app/virtual-directory-mapping/local-path</xpath> </variable-assignment> <variable-assignment> <name>VirtualPath</name> <xpath>/weblogic-web-app/virtual-directory-mapping/url-pattern</xpath> <operation>add</operation> </variable-assignment> </module-descriptor>
"C:\Users\Napoleon\AppData\Roaming\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\upload\ReviewApp\app\planplan.xml:0 error VALIDATION PROBLEMS FOUND: problem: cvc-complex - type. 2.4 c: expected element" url-pattern @http://xmlns.oracle.com/weblogic/weblogic-web-app' before the end of the virtual-directory-mapping element content @http://xmlns.oracle.com/weblogic/weblogic-web-app:< C:\Users\Napoleon\AppData\Roaming\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\upload\ReviewApp\app\planplan.xml >
I also tried to use the XPath for model url as follows:
/WebLogic-Web-app/virtual-directory-mapping/[local-path="C:/"]/URL-pattern < xpath > < / xpath >
But I have the same error. The <>url-patter item is not added correctly to the virtual directory mapping tag.
It is supposed to work. Someone has done this before? or is this a bug of the deployment plan.
Thank you very much.
Concerning
K.Hello
It seems that in the new WLS10.3.2 weblogic.xml XSD order of * "url-pattern" * and * 'local-path' * is changed then the secuence of Xpath is changed... This means that now you must try with following... What has worked for me in WLS10.3.2:
MyVirtualDirEAR
LocalPath
C:\DELETE\MyImages
VirtualPath
/ Temp / *.
VirtualDirWebApp.war
war
WebLogic-web-app
WEB-INF/weblogic.xml
WeblogicWebApp_WorkManagers_12789279799714
WebLogic-Web-App/Work-Manager
firstNode
WebLogic-Web-App/Virtual-Directory-Mapping
Add
VirtualPath
/WebLogic-Web-app/virtual-directory-mapping/URL-pattern
Add
LocalPath
/WebLogic-Web-app/virtual-directory-mapping/[URL-pattern="/temp/*"]/local-path
Add
C:\VirtualDirectory_MappingApp
Maybe you are looking for
-
HP 27xi: schematics for HP 27xi monitor
Hello How should we do to get the schematics for HP 27xi monitor? Need to fix the three tables that have problems with backlight LED driver circuit. Please direct me to the correct room if this isn't it. Thank you!
-
I have a HP Clubhouse P6557c w / NVIDIA Ge Force 6150 SE integrated graphics. The PC system came with 1 single VGA connector. What do I need connect PC to HP2010i monitor and TV at the same time. My TV is a Toshiba 52 HM 95 and has two HDMI ports.
-
C5180 &; c6180 randomly left the impression at the beginning.
Hi, I have a problem with my HP printer. I have a 7520 which is fine and works fine all the time. I have 2 other a C5180 and a C6180 and they both have the same question. Ps5 printing every so often the printer/s will be leaving the impression at the
-
HP 5520: Account problem access Eprint
Hi all I am writing because I have a problem with the ePrintCenter website. I forgot my password for access to and when I start the recovery of password procedure, the site gives me this message "Server Error". How can I enter my ePrintCenter account
-
It makes my computer virtually unusable. Help! Disable windows update in Control Panel does not help