Impossible to compile for different JRE versions

Similar Questions

• Cod app and library can be for different platform versions?

  I am writing an application that must run on a wide range of versions of the device. Some of the application contains code depending on the version, but a little is independent of the version. Are there problems or special considerations for structuring an application as a main .cod file compiled for a specific platform version and a .cod of library which contains functions of "lowest common denominator" compiled for, say, 4.2.1?

  What you propose works OK for us.

  The library is developed in a different project and workspace, the "interface" between the use of the application and the library is the jar file, which is imported into dependent projects.  This means that the two become completely independent, and it is possible to exchange the library for a later version on the device, without changing the main cod.

  The biggest problem is multiple applications with the same shared library requiring different versions of this library.  This section of the shared library has been discussed widely in the DevCon, so I hope that Rim will contribute to this requirement in some way in the future.

• Firewall settings universal for different application versions?

  Hello

  I am release different versions of my application often enough and because the version number is the part of the name of actual exe all versions trigger the Firewall dialog box when the version of give is executed the first time. It is quite annoying and confuses the operators.

  The names of files that I use are as:

  -myAppV1.0.0.exe

  -myAppV1.0.1.exe

  -myAppV1.2.1.exe

  etc etc.

  Is there a disable the firewall for each application that has a filename like "myAppV*.exe"? Or maybe another way to get rid of this popup? (Using the same file name for the different versions, or completely turning the firewall is not an option)

  Thank you!

  .. .and stop including the version number in the name of the executable file. The application builder will track the version numbers and same autoincrement for you, while signatures allow Windows to keep track of different versions of the same application.

  The way you are is inherently unreliable, errors and insecurity.

  Mike...

• I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application also does not work for my site

  I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application does not also work for my site.

  Settings > privacy > location Services > confirm you always give permission to these applications to use your location.

  If not, try these standard troubleshooting steps.

  -Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

  -Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• Two build for two different OS version

  Hello

  I have two different construction for two different OS version of the same application.

  It's a build for v5.0 and one for version 6.0.

  So how can I download this two builds on appworld

  can I download two builds?

  How appworld process works for different os?

  -David

  When you set your release simply add two bundles, for example MyApp50 and MyApp60. Download the file of cod for OS5.0 and speify minimum supported OS version 5.0. After that, download the 6.0 bundle and specify minimum supported OS version 6.0. And select all of the possible devices for two cod.

  App World will do the rest is the latest version that is possible for a given user, so users with 6.0 and above will receive 6.0 cod, while users with OS5.0 will receive the 5.0 file cod.

• Eclipse Plugin config changes for different versions of the target operating system.

  Nobody knows what changes should I make for my config Eclipse generate a cod for different target operating system versions?

  Thank you

  Glenn

  You can configure it by clicking in the window menu, selecting Preferences, expand BlackBerry JDE, selecting installed components and choose the appropriate BlackBerry JDE or BlackBerry JDE component Package.

• Adobe AIR 22 beta (April 6, 2016), 'Download AIR SDK & compile for Windows' file does not? After I download and visualize the 'air - SDK - description.xml', the version is 21?

  Adobe AIR 22 beta (April 6, 2016), 'Download AIR SDK & compile for Windows' file does not? After that I have download and view the 'air - SDK - description.xml',

  < name > AIR 21.0.0 < / name >

  < version > 21.0.0 < / version >

  Hello

  We have fixed this problem. Please download a second time to get 22 AIR beta build.

  Thank you

  Krati

  Adobe AIR Team

• Hello! I have PC/Windows 8.1. I tried the SWEDISH of InDesign version, trial period, now expired time. I want to pay now. Impossible, I wonder for a serial number that I NEVER received. Please help me. Just a Web site where I can pay. Thank you

  Hello! I have PC/Windows 8.1. I tried the SWEDISH of InDesign version, trial period, now expired time. I want to pay now. Impossible, I wonder for a serial number that I NEVER received. Please help me. Just a Web site where I can pay. Thank you

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• Impossible to compile the module vmnet only for VMware Player 4.0.3 build-703057 on Fedora x86_64 16

  During the update to VMware Player 4.0.3 I get this error for vmnet-only compilation. I found a patch for 4.0.2 and a similar compilation for the last error update 4.0.2 but not for version 4.0.3. Any tips?

  JOURNAL

  / usr/bin/make-j - C/tmp/vmware-root/modules/vmnet-only self-build SUPPORT_SMP = 1 HEADER_DIR=/lib/modules/3.3.2-6.fc16.x86_64/build/include CC = / usr/lib64/ccache/CCG GREP = / usr/bin/make IS_GCC_3 = no VMCCVER = 4.6.3 Using 2.6.x kernel build system. make: entering directory ' / tmp/vmware-root/modules/vmnet-only» do /lib/modules/3.3.2-6.fc16.x86_64/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. \ MODULEBUILDDIR = modules make [1]: Entering directory ' / usr/src/kernels/3.3.2-6.fc16.x86_64' CC [M] /tmp/vmware-root/modules/vmnet-only/userif.o CC [M] /tmp/vmware-root/modules/vmnet-only/netif.o CC [M] /tmp/vmware-root/modules/vmnet-only/filter.o ' / tmp/vmware-root/modules/vmnet-only/userif.c: in function ' VNetCsumCopyDatagram ': '. «/ tmp/vmware-root/modules/vmnet-only/userif.c:520:3: Fehler: Inkompatibler Typ as 1 Argument von "kmap «» «include/linux/highmem.h:48:61: Anmerkung: ' struct page * 'works, aber hat type Argument' const struct < anonymous > «» «/ tmp/vmware-root/modules/vmnet-only/userif.c:523:3: Fehler: Inkompatibler Typ as 1 Argument von "kunmap «» «include/linux/highmem.h:54:60: Anmerkung: ' struct page * 'works, aber hat type Argument' const struct < anonymous > «» make [2]: * [/ tmp/vmware-root/modules/vmnet-only/userif.o] Fehler 1 make [2]: * Warte auf noch nicht processes going... ' / tmp/vmware-root/modules/vmnet-only/filter.c:60:16: Fehler: "THIS_MODULE" ist yesterday nicht deklariert (nicht in einer Funktion). make [2]: * [/ tmp/vmware-root/modules/vmnet-only/filter.o] Fehler 1 ' / tmp/vmware-root/modules/vmnet-only/netif.c: in function ' VNetNetIfSetup ': '. ' / tmp/vmware-root/modules/vmnet-only/netif.c:134:7: Fehler: unbekanntes Feld "ndo_set_multicast_list"in the Initialisierung angegeben. /tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: Warnung: Initialisierung von inkompatiblem Zeigertyp [standardmassig aktiviert] /tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: Warnung: (nahe der Initialisierung as"vnetNetifOps.ndo_validate_addr '") [standardmassig aktiviert] make [2]: * [/ tmp/vmware-root/modules/vmnet-only/netif.o] Fehler 1 make [1]: * [_module_/tmp/vmware-root/modules/vmnet-only] error 2 make [1]: leaving directory ' / usr/src/kernels/3.3.2-6.fc16.x86_64' make: * [vmnet.ko] Fehler 2 make: leaving directory ' / tmp/vmware-root/modules/vmnet-only.

  1. Download this archive: http://weltall.heliohost.org/wordpress/wp-content/uploads/2012/01/vmware802fixlinux320.tar.gz
  2. Extract archive
  3. Edit the file patch - modules_3.2.0.sh.  Look for the line plreqver=4.0.2 and to takeplreqver=4.0.3
  4. Save the file, and then run it.sudo ./patch-modules_3.2.0.sh

  I have this picked up on the Internet and it worked for me, as I had the same problem after upgraging my Linux Distro.

  Caveat Emptor

  Thank you

  Sky

• Java jdk and jre version 1.7 taken in charge for the instant client

  What jdk and jre are required for the current version and has oracle tested against 1.7 yet?

  The sayteh documentation:

  "Under Linux x 86, and Linux x 86-64, use JDK 6 (1.6.0_21 Java SE Development Kit) or JDK 5 (1.5.0_24) with the JNDI extension
  with the drivers Oracle Java Database Connectivity and Oracle Call Interface.
  However, these are not required for installation of the database.
  Note that JDK 1.5 is installed with this version. »

  (http://docs.oracle.com/cd/E11882_01/install.112/e24322/pre_install.htm#CHDIDIGF)

  So what is supported.
  There is no additional certification on Metalink information.

  Yours,
  Laurenz Albe

• Impossible to compile the Python bindings for dbxml - 2.5.13 with python 2.4

  Hello world
  I am trying to build the Python bindings for dbxml - 2.5.13 with python 2.4.
  Everything else has compiled just fine, but I get the following error for this:
  
  construction running
  running build_py
  running build_ext
  "_dbxml" extension of construction
  GCC - pthread - fno-strict-aliasing - DNDEBUG - g-O3-wall - Wstrict-prototypes - fpic - i/usr/local/xmldb/include--i/usr/local/xmldb/include-I/usr/local/py2.4.4/include/python2.4 - c dbxml_python_wrap.cpp-o build/temp.linux-i686-2.4/dbxml_python_wrap.o
  cc1plus: WARNING: command line option ' - Wstrict - prototypes "are valid for Ada/C/ObjC but not for C++
  dbxml_python_wrap.cpp: "Sub makeXmlException(const DbXml::XmlException&)" function:
  dbxml_python_wrap.cpp:3393: warning: deprecated the conversion of the string constant in "tank."
  dbxml_python_wrap.cpp:3403: error: invalid conversion from ' const char * ' to ' tank. "
  dbxml_python_wrap.cpp:3403: error: initialization argument 2 of ' pyobjet * PyObject_GetAttrString(PyObject*, char*)»
  dbxml_python_wrap.cpp:3412: warning: deprecated the conversion of the string constant in "tank."
  dbxml_python_wrap.cpp:3415: warning: deprecated the conversion of the string constant in "tank."
  dbxml_python_wrap.cpp:3417: warning: deprecated the conversion of the string constant in "tank."
  error: command 'gcc' failed with exit status 1
  
  I saw a similar post for an older version, but the solution does not seem to adapt to this particular case. Any suggestions on getting it to compile?
  
  Thank you
  Good looking
  
  Published by: beauSD on September 28, 2009 15:43

  Good looking

  You should just be able to cast ename to (char *) ename in the offending call. I would like to know if it works. Some conditional code could probably be added to manage older Python releases if really necessary.

  Kind regards
  George

• Error of JAVA virtual machine when compiling for ios

  I ve created a large project on the implementation of a book.

  Applications consist of a main container (book), that loads external swf (pages).

  Each page can contain some choice of e.g.multiple activities and drag and drop exercises.

  The problem is that everything was fine with the swf external loading until the number of swf is come to a point where this error pops up.

  When I RANDOMLY remove some swf then the project compiles very well even with the AppStore deployment type.

  I tried to change the jvm.ini with higher values for the java heap memory (ex: Xmx4096m) but nothing happened.

  I even used several orders of jvm to disable garbage collection (p. ex. - XX: + DisableExplicitGC) but still the error message.

  The main swf file is 500 KB, and the current number of swf external is 130, and their total area is 50 MB is almost 400 KB each.

  I tested on different machines with 4 GB of ram and a processor i3 and the other with 6 GB of ram and a processor i7.

  I reinstalled flash and used the latest updates as well as the air 4 sdk.

  Could someone help me with this?

  Is there another way to publish the ipa file?

  Thank you.

  

  Sinious thanks for your reply.

  I tried to compile ADT and it worked using this script from the command line.

  @set java_cmd = "C:\Program Files\Common Files\Adobe\Adobe Flash CC\jre\bin\java.exe"

  @set =-Xmx8192m-jar java_param

  @

  @set adt_cmd = "C:\Program Files\Adobe\Adobe Flash CC\AIR4.0\lib\adt.jar"

  @set target = ipa-test

  @

  @set cert = samples.p12

  @set cert_pass = 12345

  @set = samples.mobileprovision provisioning

  @

  @set build_file = Testing.ipa

  @set desc_files = test - app.xml

  @set files = Testing.swf assets externalSWF

  @

  java_cmd %%d java_param % % adt_cmd %-package-target % target %-stores pkcs12-keystore % cert %-storepass % cert_pass %-supply - profile %%%d build_file %%d desc_files %%d Files% provisioning

  @

  pause

  However, there is now a different problem.

  When you try to compile more than a certain number of external SWFs (eg. 350) while the process never ends. The java.exe process consumes all of my memory, and it's just stuck there for hours (I waited so he can compile for nearly 10 hours before I killed the process java.exe). When I remove randomly some SWFs then everything is fine, and the process ends after nearly half an hour or so.

  The pc I use has a processor i7 with 16 GB of ram and the java process consumes everything, even if I set myself a limit using the - Xmx8192m command.

  Is there a problem with the xmx command?

  Do I need still more ram to compile as many sovereign wealth funds.

  Is there a way to monitor the java process in order to intercept errors that occur or may use any other java params to control ram usage limits?

  Thank you for your help.

• Why have I not been able to update icloud for windows since version 3.1

  I was not able to update icloud for windows since version 3.1. Whenever it fails and rolls back to the previous version that I have

  Have you tried to remove the old version first?

  Earlier, I encountered a similar problem: Impossible to iCloud update for Windows.

• Two different language versions of Firefox at the same time?

  I am running Windows 7 Home Premium. I have two accounts, one for me and one for my wife. She uses Firefox (Japanese), and I've been using another browser. But I would like to firstly using Firefox (in English).

  Is it possible to run two different language versions of Firefox on the same computer? I want to be able to run both at the same time... (So if I navigate and she wants to check an auction quickly it can without my duty close my browser).

  Can be done with relative ease?

  Make sure that each of you has their own Firefox profile folder.

  See:

  • http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
  • http://KB.mozillazine.org/Shortcut_to_a_specific_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• ERROR: iTunes 12.4 show compilations for the album

  All albums self-assembled who put the tick 'part of a compilation' are not visible on mac album mode. They are visible to remote.app on an iPad, but in iTunes on Mac you can see gender if you have assigned a specific to your compilation album genre. Also, if you have added a track recently you will see the album in the "most recent" view The phenomena described is valid only if the content files are from different sources to download as well as if the single are downloads from the itunes store that are packed together in one album to avoid having the 20 albums on screen with a single track in it. If you are using the album are, looking for a title like a hidden compilations album you'll actually see its cover in the list of results, but when you select the hit, iTunes will not pass to the album, but whether it is sufficient to close the search window. Please correct.

  I also have this issue.

  And the current iOS music player is not also display compilation for the album. That really *...