Impossible to connect a network drive by name of host but able to match with the ip address

Similar Questions

• Where can I reallocate the letter of a mapped network drive? In addition, where to see a list of the letters in use by mapped network drives?

  Change the mapped network drive letter

  Letter h: is not available to map a network drive.  Also, it is not listed in the disk management window.  None of my other mapped network drives are no more.   Where can I reallocate the letter of a mapped network drive? In addition, where to see a list of the letters in use by mapped network drives?

  Tips on how to assign a drive letter:

  http://TechNet.Microsoft.com/en-us/library/cc757491 (WS.10) .aspx

  See also:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/can-not-change-drive-letter-Windows-7/37a22203-6add-46e4-8f1d-997b130db362

• Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall

  Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall, waiting for quick reply

  Hi cmscan,

  Thank you for using communities of Apple Support.

  I see that you add a VPN connection using IKEv2, but you do not have the remote ID. I know it's important to be able to set up a virtual private network, you can connect using your iPhone. I'm happy to help you with this.

  You must contact your system administrator to ensure that the settings that you must configure the VPN connection. Please see the iPhone user Guide for more information.

  Have a great day!

• of the Assembly's strong name validation failed "c:\windows\home\ehshell.exe". the file may have been tampered with or it was partially signed but not fully signed with the private key, what should I do?

  After I update to Windows XP SP 3 my media center has completely stopped working and it gives me following e: validation failure of strong name for the assembly 'c:\windows\home\ehshell.exe '. the file may have been tampered with or it was partially signed but not fully signed with the private key.

  What I would do.  I was grinding a lot and nothing has worked so far.

  Stone

  Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years?

• I upgraded from Dreamweaver CS4 to CS6. but now "a Technical error occurred - cannot connect to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else se

  I upgraded from Dreamweaver CS4 to CS6. but now when I want to download, I "MFP error - cannot establish a connection to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else seen this problem?

  Mac OS 10.8.5

  
  None of these issues are causing the error in DW CS6. We double-checked all of them and we did everything right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Might need to factor 6 which did not exist in the 4? Something that is not in the SiteSetup but in a hidden dialog box?

  I can also download my host using Fetch, a third party FTP. And like I said that DW CS4 works very well. So the problem is not with my host, sound with DW CS6 in particular.

  You are most likely missing something fairly simple (some goofy box cache you in some menus random). The best way to solve this problem, without playing 20 questions...

  1 open the site in DWCS4 and go to Site > Manage Sites > export to create a your site settings .ste file.

  2. close DWCS4 and open DWCS6

  3. go to the Site > Manage Sites > Import to import the .ste file to create a new site at DWCS6

  This will create an exact copy of your CS4 settings in CS6. If it still does not work, let know us and someone should have another idea for you.

• connect a network drive on netowork with 7 & xp?

  I am running Windows XP home sp3 on my laptop and my desktop was win7 there is an external hard drive that I want to be able to access from XP just as easy with 2 PC win7?

  Hi paul3200,

  You can follow the procedure below the link that has the steps of how to connect it and disconnect a network drive in Windows XP: http://support.microsoft.com/kb/308582

  You can also check out the link below: create a shortcut to (map) a network drive:http://windows.microsoft.com/en-US/windows7/Create-a-shortcut-to-map-a-network-drive

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Home premium unable to connect a network drive or find the storage network

  I have a hard drive attached to the network.  I've never been able to get my Vista machine to map to it.  Network discovery is on.  In the centre network and sharing, if I click on "View full map", Vista tells me 'Windows cannot create a map for the type of network connection', but on that same network card screen if I click on "view computers and devices", I can see the device that I want to connect.  When I try to get the camera when you try to map my network drive, Windows can not see it.  I can ping IP of the device, and I can't open the device html interface in my browser.  My XP and 7 machines see the end reader.

  Try the steps in belo

  http://www.RealGeek.com/forums/my-Vista-wont-draw-me-a-network-map-64463.html

• connect a network drive

  I bought a Surface Pro yesterday. I have the joint to my wireless network.

  I've mapped to a network against a NAS drive.

  I traced a network drive on my desktop running Windows 7 computer.

  I have also two servers to Windows Server 2008 R2 and Windows Server 2012 files. These are displayed under 'Network' so the Surface Pro

  see them but when I try MP, a network against them, I get an error 80070035.

  What setting do I change (on my Surface Pro or my servers for mapping work?

  The Surface Pro is the only computer running Windows 8.

  Hi Jørgen,
   
  I ask you to post this thread in the TechNet forums, because they are better equipped to help you.
   
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking
   

  If you have any other questions about Windows operating systems, please get back to us.

   

• Impossible to copy .vmware bundle on network drive (super slow).  Do not have this problem with other files.

  I'm just copying my pack of Windows 7 .vmware to a network drive so that it is saved.  It's only about 7 GB (expanding) and is divided into segments of 2 GB hard drive (the default installation option).

  When I try to copy the file via the Finder, he said something ridiculous like 9 hours left!  I have a GB 30 Parallels VM I created (fixed size disk and do not divide into 2GB pieces) in the evaluation of Parallels and I can copy this whole file back on the network in one hour.

  What gives?  Anyone have any ideas why I can't copy this particular file in a reasonable amount of time?  The virtual machine has been stopped (except some services run in the background on the start of OS X) and the host has restarted several times without success.

  Thoughts?

  Thank you!

  1 stop, suspend, not from inside Windows Virtual Machine target.

  2. on the Virtual Machine library Windows ctrl + click on the target of the Virtual Machine and select Show in Finder, and then close merger.

  3. in the Finder, ctrl - click on the target Virtual Machine package and select to display the contents of the package.

  4. in the Finder, delete the Applications folder from the target virtual machine package and then empty the trash.  (To be noted that the Applications folder within the target virtual machine package will be recreated as necessary).

  5. now try to copy the target Virtual Machine package.

• I can not connect a network drive in Windows 10 home

  I have a readyNAS duo I cannot map in windows 10, limit the functionality of drag and drop files. I can FTP in the NAS from the computer. File Windows Explorer sees the player in the network, but clicking on it opens the web page administration for the ReadyNAS.

  I tried to add the LSA compatibility in the registry and stopped using a PIN for password to windows.

  It's really annoying.

  Hi erimol,

  You have another computer to test if the CIFS protocol or service works well? Also check if the deactivation and reactivation of CIFS protocol in the admin page would help.

  Forward to your response.

  Kind regards

  BrianL
  NETGEAR community team

• I'm trying to set up a wireless network and it is said that something does not work with the driver.

  Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.

  Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.
  Thank you
  original title: I hope someone can help technophobe

  It is said that there is something not working only not with the driver

  You probably need to install some network drivers for your wireless card.

  Download drivers

  Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Establishment of a network domestic:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  For more information network:

  Start here to set up a home network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  What do I need to connect to Internet:

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

  Adding a wireless computer

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.

  1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.

  2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  Manually add a wireless computer

  1. sign the computer.

  2 open the connect to a network by clicking the network icon in the notification area.

  3. choose the network wireless from the list that appears and then click on connect.

  4. type the network security key or password if you are prompted to do so, and then click OK.

  -You will see a confirmation message when you are connected to the network.

  5. to confirm that you have added to the computer, follow these steps:

  -Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.

• ESX uses network adapter with the mac address that is different than virtual connect reports

  Hi all

  Our ESX environment consists of HP C7000 enclosure, virtual connect 1 gb ethernet with a mixture of BL480c and BL460c. We just bought some new BL460c G7 with NIC NC553i to replace some of the oldest BL480c. We have configured Virtual Connect to assign mac addresses. In vc management consoleI see the addresses assigned to the server, but when I start the server displays a different mac address for nic #2 that vc does. NIC #1 has the same mac address of console management vc and in the server BIOS. When I install ESX also sees the 'wrong' for #2 nic mac address. According to vmware nic #2 has not any network connected to what should be if it was really nic #2 (according to the vc management console).

  When I look at the mac addresses in the BIOS none of the network interface card have the mac address assigned by vc. VC firmware is 3.01. I have attached the photos I see information in the management of VC and BIOS console. Someone at - it for clues to what is happening and how can I solve it? Thanks in advance.

  Kind regards

  GB

  Please refer to:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1001167

  Note:   The ESX host uses following addresses starting with 00:50:56 (as opposed to the address embedded in the interface itself).

  To determine the MAC address of the interface Board of the ESX host, run the command:

  # ifconfig | grep-i hw

  The output looks like:

  vswif0 Link encap HWaddr 00:50:56:41:5 A: 59

  The MAC address is in the first line after HWaddr.  In this example, the MAC address is 00:50:56:41:5 has: 59.

  Note:   The ESX host uses following addresses starting with 00:50:56 (as opposed to the address embedded in the interface itself).

  You can also review the output information and the esxcfg-NICS - l order MAC addresses.

• Very slow internet connection on Win 7 on SSD, but works very well with the OS on the HARD disk and the mode safe on SSD

  Original title: network very slow connection on the current installation of Windows?

  So my situation is that I have two disks (SSD and HDD) who both have a Windows installation.

  Because this SSD is an I got free and is in used condition, I left my copy of Windows 7 intact on my mechanical failure of the SSD drive.

  Now the question is, my internet connection is very, very poor, unless I run in safe mode, or the installation on my mechanical drive.

  I use a wired connection, and our connection at home is limited to 120/10 mbit/s, while I have 5/10 at the most.

  I tried to replace the LAN drivers of my motherboard (MSI FM2-A85XA-G43) using both the driver disc that was bundled with my motherboard, Device Manager and the official site of MSI, I also checked my entire system using Malwarebytes, which detected 7 threats and were abducted, nothing helps.

  I also tried the DNS which did nothing either of hot flashes. Now notice what computer of my brother is also connected and works well.

  Now as I type this, I discovered that my speed has suddenly got stable again out of the blue, but I'm skeptical it will remain, so I still want to ask what is / was going on here.

  Thank you for your time.

  Sorry for the late response here, I've been very busy with the developments in the last days and completely focused on it.

  More than a week has passed since the problem disappeared as if by magic, and so far I don't see the signs of what is going on again.

  I think that the problem has passed away now, but if it arises again I will probably update this.

  Thanks for all the suggestions and your time in this issue.

• "Network not found" when installing software, but I'm already on the internet!

  I have problems installing the software. Downloads fine, connection to the Internet is wonderful, but when I try to install anything, I get these messages - "network not found. Connect to the internet and try installation again. ' or 'no internet connection. "Connect to the internet, and then restart the installation. I have tried everything I know reset IE8, uninstall programs that I tried to install, checked and rechecked my connection (have an excellent connection every time I get this message). I tried to access my Windows Installer Clean Up, but it acts like it's the download then stops. I thought I had installed earlier, but now it seems to need to be installed as well. I don't know what to try. Would it have happened when I uninstalled Microsoft Office?

  PLEASE, PLEASE HELP!

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Creation of names of users and storage space began with the numbers or _ $#.

  Hi all
  
  Could you please explain to me
  
  If the creation of users and storage names began with numbers or _ $# is fine. Are there any constraints or slandered oracle. ?
  
  
  Thanks in advance.
  Dev

  After watching a few google links, I want to sum-up rule for the design of Tablespace:

  1. always create tablespace locally managed (management of the measure).

  2. never create tablespace with hundreds of small data files to avoid a slower recovery.

  3. the types of segments that are used in the same way must be stored together.

  4. the system must be designed for the most common usage.

  5. the regions should be exceptions.

  6 feud among storage space should be kept to a minimum.

  7. the data dictionary must be isolated.

  8. always give a name to the tablespace; so it may be easy to know what contains this tablespace.

  9 http://webhelp.esri.com/arcgisdesktop/9.2/index.cfm?TopicName=Recommendations_to_minimize_disk_I/O_contention&anchor=iooracle

  10. never use quotation marks double tablespace name.

  11 create the tablespaces explicitly using CREATE TABLESPACE rather than implicitly by creating a table without specifying a tablespace name.

  12. create an a tablespace less as temporary for user types.

  13 specify the suffix ".dbf" for names of applications datafile, '.log' for log data file names.

  14. set the default storage parameters to take into account the size of the typical object.

  15 specify PCTINCREASE 0. Exceptions can only be made with the approval of the Central s/n.

  16 AUTOEXTEND must be enabled.

  17 MAXSIZE must be set.

  After posting the links to doc, I want to sum-up rule for the creation of the user:

  1. always follow "Requirements Minimum for passwords"
  http://docs.Oracle.com/CD/B28359_01/network.111/B28531/authentication.htm#CHDFDHAJ

  2. never use double quotes with username and passwords.

  3 assign a default Tablespace for the user.

  4 assign a Tablespace Quota for the user.

  5 avoid giving the ability for users to create objects in a table space, because the schema is the logical database for the user.

  6 enable auditing for many reasons.

  7 assign a temporary Tablespace for the user.

  8 identify the appropriate profile and role to the user.

  9. only letters, numbers and the underscore character are allowed in names. Although Oracle allows for $ and the #, they are not needed and may cause unexpected problems.

  10. all names are uppercase. Or at least unimportant in which case. Ignoring this rule usually leads to making reference to the tables and the columns very clumsy because all names must be in double quotes.

  11. the first character of the name must be a letter.

  12. keep meaningful names, but at the same time, do not use long_names_describing_every_single_detail_of_particular_object.

  Sources: https://www.cms.gov/DBAdmin/downloads/OracleStandardsandGuidelines.pdf
  http://www.gplivna.EU/papers/naming_conventions.htm
  http://www.Oracle-base.com/articles/Misc/NamingConventions.php
  http://SS64.com/ora/syntax-naming.html

  Concerning
  Girish Sharma

  Published by: Girish Sharma on March 2, 2012 15:09

  Published by: Girish Sharma on March 2, 2012 15:12