Impossible to connect to the display of admin of Arcadyan ARV75 wireless modem

Similar Questions

• 'Impossible to connect with the activation server' while trying to activate Windows 7

  Stater of the i run windows 7 on a laptop dell inspiron N5050 32-bit, windows asks me to re-enter my product key each tome I get it it displays after loading: impossible to connect with the activation server, see other ways to activate windows, pls make serious saying my trial period has expired why it cannot connect to the server to check the product key? Help, please

  Original title: activate windows

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Should I connect to the display, the vga cable and dvi cable at the same time. HP 1110 FP7

  Should I connect to the display, the vga cable and Dvi cable at the same time. I have a FP7 1110

  UNUSED - a connection only (from the source of the same cylinder head box) - always!
  DVI has better quality.

  C.

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• Driver NVIDIA OpenGL lost the connection with the display driver

  Laptop Alienware M14x

  Windows 7 pre 64-bit

  8 GB ram

  3 GB of video: NVIDIA GeForce GT 555 M

  Intel i7 2760QM

  AE CS4

  Æ keeps crashing. I get the following message while doing something as simple as scrubbing through the timeline, or change the opacity of a layer. 1080 p, I have a layer of the image, a solid, color corrections, and that's all. I just got this new computer, and I've never had this problem on my old computer.

  This message is displayed after AE blocks. "The driver NVIDIA OpenGL lost the connection with the display driver and can not continue. The application must close. »

  This message is displayed in the taskbar: "display driver stopped responding and has recovered. Display driver NVIDIA Windows kernel Mode Driver, Version 267.21 stopped responding and has successfully recovered"

  any ideas on how to stop EI do not cause my display driver to stop working?

  Thanks, Ramzi Rebeiz

  Turn off OpenGL in the AE preferences.

  Mylenium

• Unable to connect to the internet due to lack of radio wireless button

  I'm using a Thinkpad Edge 11 and I just updated the BIOS utility (don't know even why I did it in the first place) using this link: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014926#version

  I checked the BIOs version and it corresponds to my laptop (86ET31WW (1.15))

  But now I can't connect to the internet. I tried troubleshooting my wireless connections and he told me to go on my "wireless capability" on my laptop. I guess that it is a switch that can turn my wireless on and outside, but the model of laptop I don't have all this button.

  I installed the program of dial-up connections, but it also tells me to go on a button on my laptop.

  I already checked my BIOS Setup and the Wireless Watch activated it.

  I feel like I could have downloaded the wrong BIOS update, but I don't know how to uninstall or cancel it. Could anyone refer me to another update of the BIOS I should use please? or any other method, so I can turn on my internet connection? I am very inexperienced with computers... any help would be appreciated.

  Here is some additional information that might help on my laptop:

  Windows 7 Professional 64 bit

  Intel WiFi Link 1000 BGN

  Thanks in advance.

  Hello and welcome,

  What happens when you press F9 (with windows running)?

  Z.

• Impossible to connect to the service from the Jetty/Admin at distance

  I threw installed on our local CF dev server so I can enjoy the stop & start CF in my box of dev (on the same local network as the CF dev server). CF 10 in a box of Win7 Pro 64-bit.

  I can connect to the Pier from the dev server via http://localhost:8985 .

  I've added exceptions to firewall so that it (tried two specific ports and allowing jetty.exe through).

  But I can't just login from any machine other than the one where thrown - it expires as if the port is blocked. I looked on the Director Pier to the connector (which I am certainly not too familiar with) but I don't see anything here any "localhost only" especially as a whole is able to access the remote service.

  Am I missing something? I get not wanting to expose the product to the wild, but our external firewall handles that. Should I mess with the internal tomcat configuration to make it work?

  Interesting...

  (1) open C:\ColdFusion10\cfusion\jetty\etc\jetty.xml

  (2) search for '127.0.0.1'.

  (3) replace 127.0.0.1 w / IP of the CF Server (the same as the host name field on the 1st page of the remote server configuration wizard)

  (4) restart the "Server ColdFusion Pier 10" service

  (5) attempt to stop or restart via CFB

  (6) see the watch BFC servers display the status of the server has changed since the 'market' to 'Stop'

  (7) see no error logged to the Console of the BFC view

  HOWEVER: The remote server in CF never really stops or restarts.   And the State, to the BFC servers, hangs on "stop".

  Then.  has obtained further... but still no solution = P (and of course thrown is now available in the browser via the IP Address of the server, but no longer via localhost)

  Thank you

  -Aaron

• Cannot load sites http but https are ok - as impossible to connect to the App store

  Hi people, for the first time I have a serious problem with my Mac and 10.8.5 and I hope to find some help here.

  The problem:

  All of a sudden (no idea of what happened, why it happened) I can not open Web sites beginning with http, for example http://www.advrider.com

  The error message is: unable to connect

  However websites like Facebook, this forum etc i.e. all sites beginning with https://... properly.

  This is valid for Firefox and Safari.

  Thunderbird works fine but the I can't connect to the App store.

  The problem is that I don't know yet where to look to find the problem.

  I did some fishing (without a solution)

  -verification of DNS settings (use 8.8.8.8 and 8.8.4.4)

  -Clear cache

  -Re-install point AP

  -switch to another Wifi network (currently in a hotel and there are supposed to be two totally independent networks)

  -turned off the firewall

  n ' use a proxy

  My wife with El Capitan Mac works fine on the same network, but because I don't know what to look for, it makes it almost impossible to compare the settings one by one.

  No idea what to do?

  Post edited by: Kuhjunge - another mac works fine on the same network.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• HP Officejet 6500 a more impossible to connect to the server

  My HP Officejet 6500 a more printer was connected to my wireless network and was attached to the ePrint service; and I had an email address to send prints to my printer. But today, when I go to the ePrint, it shows that my printer is NOT connected to the SERVER!

  He invites me to go to the Setup menu option / Services Web Setup / email address Panel on the printer display. And, when I do that, it shows me: "you can connect the printer to the itenrnet through a proxy server and touch the ENTER PROXY button! I do not know what Proxy Server, he is asked? And when I get soemthing, it then asks a PORT number! Still, I don't know what is the Port! My printer is still connected to my home wireless network.

  Then I went back to HP ePrintCenter page and REMOVED my printer and then tried to ADD a printer, but, now, he asks me to "enter the printing Code.

  When I tried to enter the print code I had on the file, it says that the code was not valid; the codes are ONLY good for 24 hours, and I have to get a new printing code to return to the configuration of the printer menu steps described above!

  Looks like I'm stuck in a vicious circle.

  I would appreciate your help. Thank you.

  To correct the unable to connect to a web server error. I'd start by power cycling the router and the printer. If still we get the error that I will then try to put a static DNS server built-in web printer (EWS).

  To power cycle the router:

  1. unplug the router (most do not have a power button) and then put
  the printer off using the power button
  2. wait 30 seconds
  3 plug in the router, wait until it is completely upward and the operation.
  4 turn on printer
  5. after the printer is completely top and operational reattempt to connect to web services

  If after that, you still get the error message, I had put the static DNS. To do this:
  1 get the IP address of the printer, and then make a browser (IE, Chrome, any browser you want) and enter
  IP address of the printer in the address bar. This will bring up the SEWS
  2. search for the network titled tab and click on it
  3. then click on IPv4 in the left column, wired / wireless depend on the connection, if connected by Ethernet
  Choose wired, wireless select wireless
  4. when loading this page watch the second part entitled 'Configuration of the DNS addresses' change this radio
  Manual button and change the DNS preferred manual to 8.8.8.8 and manual to auxiliary DNS
  8.8.4.4 and then click on apply.
  5. pay particular attention the following screen which appears this message usually is a way to undo changes only
  made by clicking on the OK"" button. Avoid this by clicking another tab
  or just leave it until you close it.
  6 turn the printer of the cycle and then turn it back on
  7. once the printer is back on and retry operation, activate web
  services and reprint information page so that you can get a new code and add your printer back to ePrint Center. You will need to create a new e-mail address for the printer.

• Impossible to connect an external display

  Hello

  I have a MacBook pro 13 "with the latest software and updates to the OS. I tried unsuccessfully to connect my laptop to an external display, a Dell P2414H.

  Unfortunately, this screen has a hdmi connector. I used the VGA cable with a VGA adapter / HDMI to connect to my Mac. I chose the VGA output on the screen, but the MacBook has not detected the screen. I can connect the external display with the laptop of a colleague who is on the 8.1 Windows / Ubuntu LTS 14.04 (dual boot). Thus, the HDMI, VGA cable adapter and the screen are ok because they work on other computers.

  I also tried to plug in my MacBook at home with my external screen Asus (hdmi connection) and my Sony TV (hdmi connection). Everything worked well.

  How can I solve the problem of connection with external display Dell?

  Thank you

  Hello Swissteam,

  Thank you for using communities of Apple Support.

  I see that you are not able to connect your Dell screen to your MacBook Pro. Here are a few articles to take a look at the problem.

  Get help with graphical problems on external displays connected to your Mac.

  Use 4 K and Ultra HD TVs with your Mac screens

  If they do not resolve the problem for you, please let us know more details on the specific symptoms you see.

  Concerning

• Impossible to connect to the internet in Internet Explorer or connect to iTunes

  initial connection problem title: Internet. I can't connect to the internet by something other than aol. which works very well. Internet Explore cannot display the Web page. ITunes can't connect any.

  As I know, no recent changes have been made
  I have trend micro internet security, I ran several times recently, and no major problems have been found
  I emptied the dns already

  Help!

  Just disable your internet security software and try

  Thank you
  Renjith

• vCAC 6.0 adding an identity store "impossible to connect to the directory store.

  I am trying to add my first store identity vCAC 6.0 and when I try to test the connection of the above error is displayed. I think I have my settings correct Active Directory, I used ad Explorer to check that my user DN access was correct. I'm not an expert of the active directory, then maybe I'm missing something simple enough.

  Here are the settings I've specified in the window:

  Name: Hadoop

  Type: Active Directory

  URL: ldap://WIN-0ECVBF10RD1.hadoop-ad.ut1.omniture.com:389

  Domain: hadoop - ad.ut1.omniture.com

  User of the connection DN: CN = VMware vCAC, CN = Users, DN = hadoop-ad, DN = ut1, DN = omniture, DN = com

  Password: [password]

  DN research group: DN = hadoop-ad, DN = ut1, DN = omniture, DN = com

  I checked the port and this should be the default port TCP AD. The host name corresponds to the record DNS solve the local machine. I understand that vCAC is _very_ depends on all the corresponding to the top DNS records. All the ideas around what to do in order to add this store to identity?

  Thank you in advance.

  --

  Chris.

  Hi Chris,

  Your DN should be of form,

  CN = VMware vCAC, CN = Users, DC = DC = ut1, omniture, DC = com.

  Better to use AD Explorer to connect to your ad, and it will give you the domain name correct for the user you are trying to integrate the ad with.

• Impossible to connect to the console of IntegratedWebLogicServer after the upgrade to JD11.

  Hi all
  
  After the JDev upgrade to version 11.1.2.1.0, I can not connect to the console of IntegratedWebLogicServer.
  
  I've tried combinations both weblogic/weblogic and weblogic/weblogic1 according to the findings of the discussions of the previous forum with no luck.
  
  Any ideas?
  
  Thanks in advance,
  
  J. -.
  
  Published by: jpolanco on February 21, 2012 08:49

  The first time that start you WebLogic in 11.1.2. * JDeveloper, you will be asked to set a user/pass for the weblogic admin.
  If you do not remember what you have set - remove the defaultDomain under system11.1.2 of the user directory... directory.

• HP Officejet 6500 has plus: HP Officejet 6500 a more impossible to connect to the server

  My printer can detect my wireless network, but does not connect to it. Problem started with my MAC a few months ago, but he persists even with my new HP laptop.

  I thought I could have network problems, so upgrade my router (Linkys at Linkys))... still problem. Comcast upgraded my router (Linkys multifunction ARRIS) again and the problem persists.

  I tried cycling power offshore for the router and the printer.

  Even my scanner picks up signals from the printer. I don't know where's the disconnect?

  Help, please

  @mikkiglanvill

  Printer:

  HP Officejet 6500 a Plus e-All-in-One - E710n

  A few ideas

  If you have not done for awhile, you may download and install a new copy of the software full functionality.  Reference: install the full features software - printer

  If the printer is located where you can do so, you could try a wired connection to the router.

  You could try the printer of the assign a static IP address.

  Make sure that there is at least 1 meter / 3 feet between the printer and all wireless devices you want to connect.  Too much is as bad as too far away...

  Paw through all ideas / suggestions / information in the exceptional User Guide of this printer - network setup Section starting on Page 222.

  Try to use as not only a static IP address, but also a hard to connect to your ISP DNS information.

  Mount the power wireless on your receiving devices (PC)

  Help:

  Printer keeps no connection Wi - Fi

  Set the SSID printer

  Parameters to improve wireless connectivity

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

  I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

  However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
  How can I create a network bridge and get the wireless internet to connect please?

  Any help to fix this would be appreciated,
  P

  This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

  If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
  Most Microsoft Valuable Professional