Impossible to connect to the server (could not find library Shell of spring)

Similar Questions

• Test the connection to the database failed: connection to the server could not

  I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

  /var/opt/OV/log/NNM/public/nmsdbmgr.log

  06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
  The server running on host "127.0.0.1" and accept
  TCP/IP connections on port 5432?

  /var/opt/OV/log/NNM/public/postgres.log

  2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

  2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

  2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

  I have checked/etc/hosts and found the following entry:

  #; Local
  #;
  127.0.0.1 localhost

  The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

  Turns out be the permissions on the file/etc/hosts.

• The connection to the server could not be

  probably an old question, but I have a coldfusion server on my LAN and I have ColdFusion Builder on my machine, well I can't seem to connect to my ColdFusion server at all. I am receieving... impossible to establish the connection to the server. I've already uncommented the RDS of the web.xml file part and uses IIS 6 on windows server 2003. Any help would be great. Thank you.

  solved

• connection to the server is not available error when downloading the journel

  Dear experts,
  
  When downloading the journels to R12 using ADI we face below error
  "connection to the server is not available, please contact your technical support representative.
  
  our environment is apps: 12.0.6 and database 10.1.0.5, linux redhat 5
  
  Please suggest on this issue, there is no error in appl_top/bne/12.0.0/log (infact nothing in this directory)
  
  
  Concerning
  Francis K.
  
  Published by: 918055 on July 3, 2012 06:54

  918055 wrote:
  Hello Hussain,

  Problem has been solved, raised the issue because of the Excel settings, we enabled the option "enabled all macros" and then it worked fine.
  Thanks for your advice on this matter

  Kind regards
  Francis K.

  Thanks for the update and for sharing the solution!

  Hussein

• See connection to the server does not see any source

  Hello

  I have a very big problem, my opinion-connection to the server does not see any computer desk-source. I had seen some sources but not all a few hours ago. At this point, I did not see the sources I so did many trys to see this source. Overall I don't have luck, and now I see no source.

  The problems started with a VM Windows Server 2003 EE SP2, I need training to be deployed with a view. I have not seen this virtual machine, either I chosse linked clones or not.

  The journal of the events of this virtual machine show, auto login TP Server service not started right.

  I hope to have some ideas that will help me to solve this problem.

  Greetings

  You can use a server OS in a pool of Terminal Server services.  If you want to set up a desktop computer, you will need to use a desktop supported OS.   You can find operating systems supported in the Administrator's guide, http://www.vmware.com/pdf/view31_manual.pdf.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• A connection to the host could not be established

  I am running windows xp on an ubuntu host and it was working fine until I tried to start my desktop shortcut xp today.  I get the error message "a connection to the host could not be established."  I don't think I changed anything since the last time it worked correctly.

  Also, I can't access web page.  Firefox "unable to establish a connection."

  Someone has an idea?

  Hello

  See vmware running services. No doubt vmware - pass does not work.

  Try to start /etc/init.d/vmware-mgmt

  J.

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• The system could not find the environment option that was entered.

  I have Vista Home Premium. I must have met a significant corruption or a virus. Here's what the system won't let me do.

  System restore
  Launch any program exe
  run cmd as administrator
  launch msconfig
  Basically, everything I download don't throw (including several ladies virus recommended this forum and others)
  If it's a virus, he got by AVG free edition
  Safe mode does not enable all the options I get always "the system could not find the environment option that was entered."
  It of almost as if someone really took time to reflect on how to thwart an attack and then implemented in the opposite direction.

  Is blowing the entire disk and back at my only option?

  Help!; 0

  Zitouni,

  Thanks for your reply, good point on the File Checker, I didn't know that. Unforuneatly I have not see your reply until I decided it was time to re - install the system. One thing to note, I couldn't do a 'run as administrator' anyway possible. This system was really corrupt which leads me to believe that he may have been a NTFS/Fat 32 Co-mingling question. Just a guess, but I really don't see how it could have happened otherwise.

  Another thing to note, if you have a Dell Inspiron 1720 with a 250Gig HD-make sure that you format the partition, you then load the SATA drivers! Also, make sure that the restore partition does not primary. Make sure that you format (assuming that you have backed up your data before!). Otherwise, it hangs on Setup to complete the installation. Who took me ahwhile to understand.

  Everything is cool now (reinstalled Vista), just thank ful there is a site like this to run things by! ;)

  Concerning

  Jeff

• At startup, getting the error - the system could not find the environment that was entered

  I have Windows Vista Home Premium and I have the OS on my hard drive with no CD. I get the following error message when I start my laptop on the desk. The system could not find the environment that was entered. What can I do to fix this?

  The only answer I found in Google:
  http://UK.answers.Yahoo.com/question/index?QID=20100411034348AAALd89

  Your laptop you happens to be a Sony Vaio? What model?

• Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Ould does not start on local print spooler service. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• "I received a message to activate the firewall of windows as important, but when I try to turn it on it gives me" the systerm could not find the environment option.

  #corrected "tehe systerm could not find the environment option" in the title

  "the system could not find the environment option"

  Hi nickzino,

  (1) what is the complete error message you receive?

  (2) since when are you facing this problem?

  (3) remember you to make changes to the computer before this problem?

  Method 1: Let flow the fixit available in the link below and then check

  Security Warning: the Windows Firewall is disabled

  http://support.Microsoft.com/kb/2288085

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• __why my computor still says the system could not find the environment option that was entered when I trey to change settings or load a new program

  the system could not find the environment option that was entered

  Hi Yasish.P,

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O when you get this error message?

  Meanwhile, analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  You can see the link below for more information.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/aa301b37-e6b9-4f8c-B812-3ba2c58e1442

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• WebWorks & ripple: package & sign: cannot sign the application - could not find signature keys

  Hello

  I am developing a prototype for my company using ripple and Webworks.

  If I package it without signing my BB returns an error "must sign this."

  If I try to sign, I get an error "cannot sign the application - could not find signature keys.

  Somewhere on the net, I realized that I am required to buy RIM signing keys, is this true?

  Is it possible to have temporary keys for testing purposes?

  Thank you

  Roberto.

  Signing keys are free and available here

  https://www.BlackBerry.com/SignedKeys/Codesigning.html

• The system could not find the environment that has been entered - option Windows 7

  I don't know what I was doing at the computer before this problem started. However, I first noticed that something was wrong when I tried to open the photo viewer and was faced with the problem of the impossibility to find the module specified for this program. In an attempt to solve this problem, I tried to download and install the Photo Gallery in Windows Live and this is when I first discovered that my system has this problem.

  
  

  I went online to search for solutions to these problems, but none of the solutions worked. Here are the steps that I tried in vain that the system could not find the environment option that was entered.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  I tried open CMD with administrator privileges but am unable to do so. Once more, the next step on the start-up of the Installation DVD of Win 7 to use the Startup Repair tool doesn't have that the system was unable to find the environment option that was entered. I proceeded to try to use the system restore, but is facing the same problem too.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  This is the report on my existing variables according to the steps there. But unfortunately, this thread has shown no solution, that I could undertake, given that I can't open Regedit too.

  
  

  
  

  %ALLUSERSPROFILE%

  APPDATA

  ASL.log

  CLASSPATH

  COMPUTERNAME

  ComSpec

  FP_NO_HOST_CHECK

  HOMEDRIVE

  HOMEPATH

  LOCALAPPDATA

  LOGONSERVER

  NUMBER_OF_PROCESSORS

  OPERATING SYSTEM

  Path

  PATHEXT

  PROCESSOR_ARCHITECTURE

  PROCESSOR_IDENTIFIER

  PROCESSOR_LEVEL

  PROCESSOR_REVISION

  ProgramData

  GUEST

  PSModulePath

  PUBLIC

  QTJAVA

  NOMSESSION

  SystemDrive

  SystemRoot

  TEMP

  TMP

  USERDOMAIN

  USERNAME

  USERPROFILE

  WINDIR

  
  
  Can someone help me please? I think to reformat my computer if this continues (think of how to do it now I can't run the Windows 7 Installation disc either).
  
  
  Thank you very much.
  
  
  Nicholas C

  You can probably fix your problem by using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Enter the administrator password when you are prompted. It is often empty.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• EPMHFM-66054: the system could not find the process of the application ADNIPHFM data source

  Hi all

  When you open the HFM application below the error is thrown.

  EPMHFM-66054: the system could not find the process of the application ADNIPHFM data source

  
  

  Another application is created as Test HFM, is the opening perfectly.
  

  Please help me on this issue, very urgent.

  Thanks in advance

  Concerning

  Satheesh.S

  Thanks to all of you question has been resolved by re set up again for the configuration database and upgrade from previous version.

  Concerning

  Satheesh.S

• HP Officejet 6500 a more impossible to connect to the server

  My HP Officejet 6500 a more printer was connected to my wireless network and was attached to the ePrint service; and I had an email address to send prints to my printer. But today, when I go to the ePrint, it shows that my printer is NOT connected to the SERVER!

  He invites me to go to the Setup menu option / Services Web Setup / email address Panel on the printer display. And, when I do that, it shows me: "you can connect the printer to the itenrnet through a proxy server and touch the ENTER PROXY button! I do not know what Proxy Server, he is asked? And when I get soemthing, it then asks a PORT number! Still, I don't know what is the Port! My printer is still connected to my home wireless network.

  Then I went back to HP ePrintCenter page and REMOVED my printer and then tried to ADD a printer, but, now, he asks me to "enter the printing Code.

  When I tried to enter the print code I had on the file, it says that the code was not valid; the codes are ONLY good for 24 hours, and I have to get a new printing code to return to the configuration of the printer menu steps described above!

  Looks like I'm stuck in a vicious circle.

  I would appreciate your help. Thank you.

  To correct the unable to connect to a web server error. I'd start by power cycling the router and the printer. If still we get the error that I will then try to put a static DNS server built-in web printer (EWS).

  To power cycle the router:

  1. unplug the router (most do not have a power button) and then put
  the printer off using the power button
  2. wait 30 seconds
  3 plug in the router, wait until it is completely upward and the operation.
  4 turn on printer
  5. after the printer is completely top and operational reattempt to connect to web services

  If after that, you still get the error message, I had put the static DNS. To do this:
  1 get the IP address of the printer, and then make a browser (IE, Chrome, any browser you want) and enter
  IP address of the printer in the address bar. This will bring up the SEWS
  2. search for the network titled tab and click on it
  3. then click on IPv4 in the left column, wired / wireless depend on the connection, if connected by Ethernet
  Choose wired, wireless select wireless
  4. when loading this page watch the second part entitled 'Configuration of the DNS addresses' change this radio
  Manual button and change the DNS preferred manual to 8.8.8.8 and manual to auxiliary DNS
  8.8.4.4 and then click on apply.
  5. pay particular attention the following screen which appears this message usually is a way to undo changes only
  made by clicking on the OK"" button. Avoid this by clicking another tab
  or just leave it until you close it.
  6 turn the printer of the cycle and then turn it back on
  7. once the printer is back on and retry operation, activate web
  services and reprint information page so that you can get a new code and add your printer back to ePrint Center. You will need to create a new e-mail address for the printer.