Impossible to fully install LabVIEW 2010 on WinXP SP3

Hello

I tried many times today to install all OR Developer Suite 2010 helps install disks. I catalogged all items that not have installed. LV 2010 works but I don't know if everything works. Here are the elements and the order in which I wasn't able to install:

'Crucial questions when National instruments drivers using Microsoft Visual Studio.NET 2010 resolved by NOR-PAL 2.6.5' - I have successfully installed this but the message still comes up and gives me a message "Are you sure you want to move forward", when I'm trying to keep the installation

"NOR-USI 1.8.0" has not been installed. Error 1935

Error "Runtime-NOR-LabVIEW engine Interop 2010" 1935

"NEITHER AFW UI assembled" Error 1935

"OR Measurement Studio 8.6 company for VS2005 Runtime" Error 1935

"NEITHER AFW Channel Configuration Tool" Error 1935

"NEITHER AFW assembled custom user interface" Error 1935

"NI LabWindows/CVI 2009 Service Pack 1 Runtime Engine" - no error number

No idea if I need these applications run LV 2010?

Thank you.

It seems that there is something strange going on with your .NET framework, which is the origin of this conflict of driver.  Try uninstalling your current .NET framework as well as LabVIEW (from Add/Remove Programs) and re-setup of the Microsoft .NET Framework page followed by a new installation of LabVIEW.

A few other things to note:

Make sure you have all of your anti-virus software / firewall disabled while trying to install LabVIEW.  We have seen this before due Setup error.

Also, make sure that you install your drivers after installing LabVIEW.

Tags: NI Software

Similar Questions

  • Can't install Deskjet 3070 on WinXP SP3

    I can't install the software for a new Deskjet 3070 B611a printer on a Windows XP SP3 desktop.  The printer is connected to a home network wireless and works very well on a laptop Win7 and laptop WinVista.  They communicate wirelessly to the network.  The desktop machine has a wired connection to the wireless router.  I tried the troubleshooting tools, but nothing seems to tell me what is the real problem.

    It seemed to install OK on the office, the first time, but when I tried printing on the printer it says it couldn't communicate with him.  So I uninstalled the printer and am now in the process of re - install.  But now she even did not finish the installation process.  I tried to disable the firewall - no change.

    Thank you, but I seem to have found a way around it.  I downloaded the software from the HP site and used instead of the Conference on disarmament.  But more importantly (I think), I have set up as a USB printer connected first, and then he changed the network connection.  This seems to have worked.  Thanks for your replies.

  • Cannot install flash after uninstalling winxp sp3

    Current Firefox, IE8, Chrome current

    Flash would not be updated or uninstall correctly. Removal tool adobe used, to get him out.

    now will not install flash.

    You know what?  I got a deal on another forum (bleepingcomputer.com) due to an infection/rootkit. Last week, we have been dealing with and clean up steps. As recent as yesterday, Flash dropped to 50%.  I was recording a session to present today and this is! the installation worked.

    Maybe it's a good idea to suggest that this problem might have been caused by an infection.

    Otherwise, please close this ticket.

  • LabVIEW 2010 will not install on Win XP SP3

    I have made several attempts to install LabVIEW 2010 on Win XP SP3. I already have LabVIEW 2009 installed and working.

    On each attempt, I accept the default installation options and do not put in a serial number. The first attempt got stuck at 2% full and has not changed for 30 minutes. No error message. I canceled the installation and tried to install it again from setup.exe.

    The next two attempts to stall at 0% blinking forever. The 4th attempt made in 18% entered at a standstill for more than 30 minutes. The next two attempts is stagnating at 0% repeating and not cancel. I had to end it with the Task Manager.

    Why it not install LabVIEW 2010 without stalling until 30 minutes? Why it not spit an error instead of just stalling? How can I know why he moved?  How should I do?

    I finally got to LabVIEW 2010 to install.

    I didn't have a corrupted download. I didn't disable my antivirus. I didn't have a lot of processes running. I turned off my computer last night and I tried the setup.exe again this morning first thing. Maybe running LabVIEW 2009 yesterday before installation left something that the installation did not like. Who knows?

    How is the installation of LabVIEW 2010 would just stall for long periods (more than 30 minutes, maybe forever) without any error message or progress?

    LabVIEW has a Setup log that I could look into these situations to see where the installation is suspended up to and perhaps why?

  • error in the specification of the build in the Project Explorer (Labview 2010)

    Hello

    I'm having a problem with building my folder in the Project Explorer after installing Labview 2010. Error occur said that as an attachment. I already reinstall back the software especially devices or. still having the same problem.

    Hello

    The problem is solved after I installed Labview 2010 sp1 patches... Thank you responded and give an idea and opinion...

  • Extremely slow LabVIEW 2010 icon editor

    Working on a project of medium size in LabVIEW 2010.  Out of the blue icon editor is slowing down.  So slow that type in a character of text takes 20 seconds.  After closing, the editor he is about 3 to 5 second rule on everything that I do in LabVIEW.

    LabVIEW games restart things back to normal, until I open the icon editor.  No results of Subvi opening in this problem.  And this happens in any project or even if no project is open, and I'm trying to change the icon in a Subvi Untitled 1.

    Anyone else seen this behavior.  I really want to re - install LabVIEW 2010.

    Thank you

    I've not seen this behavior, and I really have no idea what could be the problem. As a solution, we can 'turn off' icon editor and force LabVIEW to use the old classic that is causing the problem to go, in my opinion. To do this, rename the following lv_icon.bak:

    [2010]\resource\plugins\lv_icon.vi LabVIEW

    This will completely ignore the code from the editor of icon and go directly to the editor of classic icons. You will lose a lot of the new functionality of the icon editor, but I'm guessing that this will make the downturn go away.

  • LabVIEW 2010 - applications and issue of RTE

    Hello

    I am currently using LabVIEW 2009 and my company is upgrading to 2010, and I had a few questions on creating applications and their execution on other computers to open the switch.

    (1) computers that don't have that installed LabVIEW 2010 runtime will be able to run applications developed with LabVIEW 2009 (and earlier versions)?

    1.1) in the contrary case, we will have to rebuild all of our current programs to use the RTE of 2010?

    (2) Conversely, exes, built in 2010 will be able to run on computers that have the installed 2009 RTE?

    (2.1) if not, is there an easy way to downconvert programs written in 2010 so that they run on RTE in 2009?

    (2.2) that we will be able to use the new features in 2010 (as the network streaming, export to excel graphs) if we downconvert for 2009?

    3. If rebuild us some applications that were originally written in 2009 us will it install the RTE of 2010 on the target computers, so that they can run the new version of our application?

    Thank you!

    -Nick

    Applications created in 2009 should the TENS of 2009.  Similarly, applications created in 2010 must RTE of 2010.

    You can install both engines to run on the PC at the same time.  Your .exe will use it is appropriate based on what version it was built in.

  • Language setting bad compile App with labview 2010 SP1

    Hello

    I got this when I create an application with LabVIEW 2010 SP1

    My OS is a Windows XP English with a regional setting to English (Canada)

    Y at - it a fix for this problem, that some were.

    After a repair of my SP1 installing LabVIEW 2010 I had the correct behavior

    I think something was wrong in the installation of runtime LabVIEW 2010

  • 9.30 NIDAQ drivers not install LabVIEW 2011 - example. Microsoft .com's in LabVIEW 2010 under vi.llb

    I just upgraded to LabVIEW 2011 without uninstalling LabVIEW 2010.  I downloaded the last set of drivers DAQmx 9.30.  I find that these drivers are installed in a DAQmx folder under the vi.llb of theLabVIEW 2010 and NOT in the vi.llb of LabVIEW 2011.  The DAQmx features do not appear on the menus and the existing instances are reported as 'cannot be compiled. How can I get the DAQmx functions to properly install LabVIEW 2011?

    You must DAQmx 9.4.

    9.4 DAQmx

  • Impossible update/security update (MSFT XML Core Services 4.0 SP2) or install Office 2010 (trial/beta) - message common all the way through; HRESULT: 0X800736FD

    Impossible update/security update (MSFT XML Core Services 4.0 SP2) or install Office 2010 (trial/beta) - message common all the way through; HRESULT: 0X800736FD.

    I just got this computer, it came with XP installed but Win7 Pro OA... I installed Win7 immediately. The CS XML 4 SP2 update/security updates do not have continually. Is this related as sharing the same code HRESULT? Moreover, trial version of Office 2007 have installed now. Cannot update with Office 2007 Service Pack 2.

    Would be very grateful for the help! ~ Joe

    I don't have any security/antivirus suite & have the firewall off the coast.

    I see.

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

    HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section of http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) and before using a player flash or SD card that is not brand new, or has not been freshly formattedotherwise:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Good luck!

  • Impossible to install labview 2012

    I try to install labview 2012 on my 64 bit Windows 7 system, but fails;

    Here are the symptoms:

    (1) I click setup.exe directly and it shows that:

    (2) if I run it with the administrator, it appears that:

    (3) I checked that I can execute another exe file...

    Thank you

    Hi Bestchun,

    It could be a damaged Setup file. Try to re - please download the installer of ni.com/downloads.

    I will follow this post, answer so if this does not work for you.

    N

  • Impossible to install office 2010

    When I try to install office 2010, the program said: it must be installed in the disc of Q, and Q disc should not be used.

    But, as we know, disk Q of the thinkpad is a recovery disk, how could he not be used!

    I completely think I might do, but still...

    Anyone have the solution for this?


  • I get the error indicating the niajel.dll missing for HSDIO in labVIEW 2010, can someone help how to solve this problem.

    I'm using LabVIEW 2010 and installed the drivers from device LV2010 and try to use the HSDIO functions, while setting the HSDIO function on the block diagram showing niajel.dll is missing, can someone help me fix this bug.

    I tried to uninstall and install not able to set several times.

    Hello. niajel.dll corresponds to the NOR-TClk, although NEITHER-HSDIO does not specifically use it. You use certain functions TClk?

    Also, what other PXI device driver are installed on the system? Could you give a report on the MAX system?

  • LabVIEW 2010 help control Source code...

    I'm trying to set up Tortoise SVN to work with LabVIEW 2010.  I was able to get lvmerge and lvcompare to work by adding them to the list of programs within the turtle, but leave in LabVIEW there is a section to configure the source control I have a problem with.  Under "Configure Source code control" there is a drop down to the name of the Source control provider.  There is only one option: < none=""> .  I looked into it a bit online and found that LabVIEW running in Windows searches the registry database for a list of the sources of control.  I don't know exactly what he's looking for in the registry, but maybe I could make an entry in the registry to get LabVIEW see Tortoise SVN.  Anyone had this problem or any experience with this?

    To use the NCC options provided by LabVIEW you will need from a provider. For subversion, it is possible with the PushOK SVN SCC plugin.

    If you install you can checkin/checkout directly from the LabVIEW project environment.

    If you really like TortoiseSVN discover the Tortoise SVN integration made by JKI-software.

    Tone

    PS there is nothing special about 2010 in the integration of the CSC.

  • Is the combo box drop-down "Targets" in LabVIEW 2010?

    Guy of OR,.

    In LabVIEW 2010, I installed the touch screen module but 'Touch Panel corresponding project' does not appear in the list of "Targets" of the "Getting Started" initial LV window. The Add/Remove dialog box confirms that the module is installed... Is - can be changed?

    Thanks in advance

    I think that the Touch Panel project should be added to the drop target when you install the Touch Panel Module.  As this isn't the case, I think it's a bug.  Thanks for pointing out that, and I will file a request for corrective measures to get changed for the next editions of LabVIEW.

    Kind regards

    Elizabeth K.

    National Instruments | Sales engineer | www.NI.com/support

Maybe you are looking for