Impossible to get 2008 Macbook at the start of the recovery of the Internet... help?

Similar Questions

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M

• Impossible to get a substring of the current s URL page

  Hello
  
  I have a very strange problem with the URL returned by GSF. I seem to be impossible to get a substring of the URL - the String.substring (int, int) method does not appear to return the expected results. It seems that other methods of strings (such as the indexOf (String)) seem to be operating on the chain of substring returns a part, rather than on the chain saw when the url is printed in its entirety. The corresponding code is less to:
  
  -----
  AssetApiWraCoreFieldDao wraDao = new AssetApiWraCoreFieldDao (ics);
  String wrapperCurrPage = ics. GetProperty ("com.fatwire.gst.foundation.url.wrapathassembler.dispatcher", ServletRequest.properties ", true);
  
  WebReferenceableAsset wraCurrPage = wraDao.getWra (pageId);
  String theLongUrl = new String ((new WraUriBuilder (wraCurrPage, wrapperCurrPage)) .toURI (ics));
  
  This displays the correct URL (http://www.example.com/page)
  out.println ("FULLURL:" + theLongUrl.toString ());
  
  This displays the first 25 characters of a string of unknown characters (satellitescheme://SSURI/?)
  out.println ("substring:" + theLongUrl.toString () .substring (0.25));
  -----
  
  All help to work out what happening would be appreciated – as far as we can tell GSF (or maybe WCS) are originally String to behave in a non-standard way.

  Hi 950972,

  There is little of the magic that is you fool. Basically, if you change out.println () System.out.println () you will see TWO URLS begin with satellitescheme: / /. What is happening, this is the URL which are produced by the ISU Sites still are built with a satellitescheme://...#satellitefragment. Then, what is Server RHN Satellite will process the result and replace the strange chain with one that fits your URL assembler (and in this case, you use the GSF assembler).

  In your code of substring, you are breaking the special chain and are cutting the encoded URL. RHN Satellite Server does not see the prefix and the suffix combined, so it does not have to make the substitution.

  That's why Your ' e see what see Your ' e.

  A big question is however, why you try to process the URL generated by the API. I guess that sort of substitution will happen, but that should not be done. What you trying to do? I'm sure we can find the right way to achieve your goals.

  Kind regards
  Tony

• Whenever I try to download a file, I get a message that the internet explore has encountered a problem and need to close. Can someone explain why this is?

  Whenever I try to download a file, I get a message that the internet explore has encountered a problem and need to close. Can someone explain why this is?

  What Service Pack for XP are you running?  You use Internet Explorer 7 or 8?   If so, you can try this article to see if it solves your problem:

  "How to reset Internet Explorer settings"
    <>http://support.Microsoft.com/kb/923737 >

  HTH,
  JW

• Unable to connect to the Internet. But on the troubleshooting that I get, "already connected to the internet.

  Original title:

  I have a Dell 1501 Vista operating system. For two weeks, I had problems connectng to internet via a wirelesss router connection. I have two other computers that work very well. When selecting to diagnose the problem, there seems to be nothing wrong, and when the selection to diagnose problems connecting under Tools, I get, 'already connected to the internet. Everything seems to work except the internet connection. Help, please!

  Hello

  1. are you having the same problem with other browsers?

  2. what error message do you get when you try to browse the Internet with Internet Explorer?

  3 did you changes to the computer, before the show?

  Method 1:

  Use the ping command to check if the packets are sent and received via the Internet.

  Ping

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/Ping.mspx?mfr=true

  Note: The link above also applies to Windows 7.

  Method 2:

  Consult the following link:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I have Lightroom 4 purchased in disc download format. I'm considering buying a MacBook Pro, but it's not a CDRom. Can I use the serial code for download on MacBook via the internet? I've only used once disks for my iMac.

  I have Lightroom 4 purchased in disc download format. I'm considering buying a MacBook Pro, but it's not a CDRom. Can I use the serial code for download on MacBook via the internet? I've only used once disks for my iMac.

  you need a serial number for mac lr.  the serial number for pc and mac are different.

  Lightroom serial number is unique because it is cross-platform: works on PC and Mac.

  Same serial number for both.

• I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  More information on this issue can be found here:

  https://forums.Adobe.com/thread/1672655

  A "quick" fix that worked for me was to uninstall Adobe... and download Adobe Reader 11.0 installation base.

  Then download each individual updates and run them sequentially.

  I installed back to the last update of security which is version 08 and were able to register under normal operations.

  You will need to disable the automatic updates to keep up with the 08 version, until Adobe fixes this problem in a future release.

  http://www.Adobe.com/support/downloads/product.jsp?product=10&platform=Windows

  Adobe Reader 11.0 - installer multilingual (MUI) AdbeRdr11000_mui_Std

  Adobe Reader 11.0.01 update - installer multilingual (MUI) AdbeRdrUpd11001_MUI.msp

  Adobe Reader 11.0.02 update - all languages AdbeRdrSecUpd11002.msp

  Adobe Reader 11.0.03 update - installer multilingual (MUI) AdbeRdrUpd11003_MUI.msp

  Adobe Reader 11.0.04 update - installer multilingual (MUI) AdbeRdrUpd11004_MUI.msp

  Adobe Reader 11.0.05 - all languages AdbeRdrSecUpd11005.msp security update

  Adobe Reader 11.0.06 update - installer multilingual (MUI) AdbeRdrUpd11006_MUI.msp

  Adobe Reader 11.0.07 update - installer multilingual (MUI) AdbeRdrUpd11007_MUI.msp

  Adobe Reader 11.0.08 - all languages AdbeRdrSecUpd11008.msp security update

• Is it possible to get an impression of the Firefox Help screens? How can I do?

  I'm not a geek and I am struggling to get my head around the use of Firefox with Windows 7. It might be easier if I could print the help screens to create a manual that I could follow in step by step mode.
  How would I do that?
  Thank you in advance.
  John Crawford.

  Select the text that you wan't to print.
  Then ctrl + c and open word or notpad, meadows
  and press ctrl + v, and then print it out.

• prevent programs to get in touch with the internet

  Dear readers,

  I also not if I can block a program to update, or to make contact with the Internet.

  Hello

  Thanks for the response back.

  Have you checked update history to see if the update installed successfully?

  Reference:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-in/Windows7/see-which-Windows-updates-are-installed

  We will perform the steps described in the article and check out them.

  http://support.Microsoft.com/kb/910339

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Hope this information helps.

• Impossible to listen to most of the internet radio stations.

  Hello!

  The sound on my PC works fine, I can listen to on CD, YouTube and some internet radio stations, such as Somafm, but most of the others are out, including all channels Digitally Imported, and many others like Bluemars/Cryosleep, MajorUrsa, Chromanova, etc...

  I have Windows 7 and IE9 64-bit. Windows Firewall, Windows Defender + (the paid version) Avast!

  Help, please.

  Thank you.

  Stéphane.

  Hello Stephanecollignon,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description provided, looks like you have problems while listening to Internet radio stations.

  1. what happens when you try to listen to other Internet radio stations?

  2. were there any changes (hardware or software) to the computer before the show?

  Click on the link below:

  Listen to the radio on the Internet with Windows Media Player

  Answer to us if you are experiencing problems with Internet Radio or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• I can print from my document file, my laptop on my wireless printer but I can't print off the Internet, help! Thank you!!

  I have a 6 month old Toshiba, laptop Windows 7 64 bit. The printer is a printer wireless Brother Multi-Function.

  Hi DeniseGarner,

  1. have you made changes on the computer recently?

  2. what happens when you try to print from the Internet?

  3. If you are using Internet Explorer, then what version of Internet Explorer is installed on the computer? To determine which version of Internet Explorer that you are currently using, start by opening a browser in Internet Explorer.   Then select 'Help' - > then 'about Internet Explorer '.   This will then show what version you use. http://support.Microsoft.com/kb/969393

  4. do you get any error code or message?

  If you use Internet Explorer, then proceed as follows.

  Method1.

  I suggest you try the steps in this article.

  You receive a script error and are unable to print from Internet Explorer 9: http://support.microsoft.com/kb/2652062

  Method 2.

  I can't print or preview before printing a Web page in Internet Explorer
  http://support.Microsoft.com/kb/973479

  I hope this helps.

• browser can not connect to the internet-help!

  Running A Dell 3000 desktop with XP.  After a reasonably stable relationship, my browser does not open an internet connection.  I tried IE and Firefox, neither of which work. When I try to open the browser, I get "connection to the 207.46.250.101 site." and then the browser tells me that it cannot open the web page. Operation of the fine to send and receive Outlook e-mail.

  The connection is through Motorola modem and router D-Link.  My office is connected to the router which is connected to the modem.  Other home computers (wired and wireless) continue to work well on the same modem-router, set up.  Comcast tech support was not able to help.  We went through recycling, ipconfig, ping, etc.  I bypassed the router by attempting a direct connection to the modem - same result.  It seems that the router and modem are in order and the problem seems to be with the office or the software.

  I tried to restore the system to an earlier time when the problem started, which did not help.  I have no restore points more early to get to the system restore.

  I got the following message with attemtps have failed to get on the internet: "Windows cannot connect to the internet using HTTP, HTTPS or FTP.  This is probably caused by the settings of firewall on this computer.  Check the settings of the firewall for the HTTP port (80), HTTPS port (431) and FTP port (21). »

  I have disabled the Windows Firewall.

  Previously, I used zone alarm and uninstalled it, although it seems always on the list Add/Remove programs in Control Panel.  Nothing opens when I double click to open the program.  When I try to remove zonealarm, I get the following message: TrueVector Internet monitor has not been uninstalled.  Uninstall wasn't able to stop the True Vector software services, this will happen if other software uses the true vector engine.  to uninstall zonealarm mare that all other true vector programs have been closed. "I don't know what another program uses TrueVector, or if it has nothing to do with the problem.

  Sorry to be verbose, but it took a lot of time and I wanted to give as much information as possible about the problem.

  any suggestions?  Thank you!

  
  

• Impossible to get a new SSD to start

  My iMac 2009 HD is dead, but I had a Time Machine backup. I replaced with a new 1 TB SSD HD death and thought I just plug the TM backup and start over. Well... I guess it doesn't work like that. I tried searching the net and found instructions to supposedly solve my problem, but they have not worked. I tried to start up taking Cmnd R, but that has not worked. I'm sure I have no CD from when I bought the iMac to my boss, while the option is out. I have an old iMac (predecessor of it) that I used as a system until I could get it fixed. I "think" I inferred that I can copy somehow the OSX from the old machine, I used it on my external hard drive which has my TM backup on it. So I think I somehow transfer that to the new SSD. Is that guess correct? If so, how can I get the operating system on the external hard drive (shouldn't it already be there as part of the TM backup?). So, how do this OS on the new SSD?

  Thank you

  You formatait the new SSD?

• "Impossible to get hardware information for the selected computer." OV V2V conversion error

  Hello

  I'm trying to convert Windows 2008 32 bit VM of VServer to ESXi 5.1 s. He always of errors with the message above. I tried to use VmWare Converter 5.1, 5.01 and 4.3.  4.3 using I get another (I get a "a general error has occurred: failure" when I click on the Finish button.)  I got the converter 5.1 work with s 2003 32-bit OS I had.

  Some things I've tried:

  -Changed type VM from 2008 to 2003

  -Powered the machine up, then shut down cleanly

  -Do of course, there is nothing wrong with configuration that could hang up the conversion as the map NETWORK configurations, etc.

  I have really no idea what to do at this point.  I tried all the solutions and workaround that I found through Google and nothing seems to work. Not really sure where to go from here.  Anyone out there have anything that has worked for them?

  Thank you

  Adam

  The error is:

  2013 06-13 T 21: 00:17.676 - 04:00 [02940 info "Default"] analysis \\stam-vm01\Virtual Machines\stam-wsus03.janus\Windows Server 2008 Enterprise.vmx

  2013 06-13 T 21: 00:19.348 - 04:00 [02940 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with "the specified virtual disk must be repaired" (error code: 14)

  2013 06-13 T 21: 00:19.348 - 04:00 [02940 info "Default"] error 14 opening disk \\stam-vm01\Virtual Machines\stam-wsus03.janus\Windows Server 2008 Enterprise.vmdk.

  As I recall there is a problem with Server2 with clean shutdown. As you say that you did a clean shutdown, try to delete additional files (lock) from the folder of the virtual computer.

  The VDDK tools or download invoke vmware - vdiskmanager.exe with the - R option.

  HTH

• Impossible to get a glimpse of the rtf files in any format

  Hello

  I created an rtf file, and I also have the XML for the same thing. I loaded the XML with rtf successfully.but when I am trying to see the preview, then I get the error message. Here is the error:

  "Conffile": C:\Users\sye59968\AppData\Local\Oracle\BIPublisher\TemplateBuilderforWord\config\xdo.cfg

  Real fonts: C:\Program Files (x 86) \Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts

  File: C:\Users\sye59968\AppData\Local\Oracle\BIPublisher\TemplateBuilderforWord\tmp\tmp\151380515796672out.pdf

  Run Start OPE

  Model: C:\Users\sye59968\AppData\Local\Oracle\BIPublisher\TemplateBuilderforWord\tmp\tmp\tmp.rtf

  SetLocale RTFProcessor: en - us

  SetData FOProcessor: C:\Users\sye59968\Desktop\rex files\test.xml

  SetLocale FOProcessor: en - us

  oracle.xdo.XDOException: java.lang.reflect.InvocationTargetException

  at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1207)

  at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:278)

  at oracle.xdo.template.FOProcessor.createFO(FOProcessor.java:2007)

  at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1142)

  at RTF2PDF2.runRTFto (RTF2PDF2.java:473)

  at RTF2PDF2.runXDO (RTF2PDF2.java:337)

  at RTF2PDF2.main (RTF2PDF2.java:230)

  Caused by: java.lang.reflect.InvocationTargetException

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  at java.lang.reflect.Method.invoke (unknown Source)

  at oracle.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:835)

  at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:572)

  at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:327)

  at oracle.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:187)

  at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1183)

  ... 6 more

  Caused by: java.util.EmptyStackException

  at oracle.xdo11g.xslt.XSLProcessor.reportException(XSLProcessor.java:965)

  at oracle.xdo11g.xslt.XSLProcessor.newXSLStylesheet(XSLProcessor.java:725)

  at oracle.xdo11g.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:391)

  ... 15 more

  Please suggest me how to solve and root cause for the same

  What is in the rtf model?

  Looks like you got some errors in rtf / incorrect using sth

  try to remove everything in rtf and add the code by code or domain by domain