Impossible to get apps working on Dev Alpha WebWorks

Similar Questions

• dropdowns jQueryMobile freeze all browser/app on BB10 Dev Alpha

  Hello

  I tried to transfer my PB to BB10 application and has encountered a problem with dropdown lists jQueryMobile. When I clicked on one of them I could not do anything else in the application (web Inspector remote display any errors in the console).

  I thought it's something on my app, but the same behavior can be reproduced from browser Dev Alpha to http://jquerymobile.com/demos/1.1.1/docs/forms/forms-all.html - there are 3 drop-down menus down - the two first drop down menus freeze browser, only the last one works.

  Any ideas?

  PS. Yes, I want to move to bbUI, but this behavior is disturbing even when

  Dropdowns JQM work on more recent (10.0.9.388) operating system, so I am happy with the fence wire.

  Thanks for the support

• Problem running QtGui / app GraphicsView on Dev Alpha

  Hi guys,.

  I'm trying to port a Harmattan on BB10 app with little success. I obviously it changed so that "haptic" uses VibrationController and QMediaPlayer replaced by MediaPlayer. QAccelerometer I used as-is from QtMobility. Other than that, I generated a new project of Cascades in the NDK, copied the source files in the folder source (qml to assets) and followed these instructions: http://www.maemopeople.org/index.php/jaffa/2012/06/20/initial_success_in_porting_harmattan_sym

  My program is compiled, but never reaches int hand (...). This is the beginning of main.cpp:

  #include 
  #include 
  #include 
  #include "mygraphicsscene.h"
  Q_DECL_EXPORT int main(int argc, char **argv)
  {
      fprintf(stdout, "reached this\n");
      fflush(stdout);
      qDebug() << "testing debug\n";
  

  None of the above messages appears when you run the application on the Dev Alpha.

  Here is the .pro (my game using opengl in graphicsview), the Makefile and bardescriptor, if theyre all help:

  APP_NAME = testapp
  
  CONFIG += qt warn_on cascades10 mobility
  QT += core declarative opengl
  MOBILITY += sensors
  LIBS += -lbbsystem -lbbmultimedia -lbbdevice
  INCLUDEPATH += ../src ${QNX_TARGET}/usr/include/qt4/QtCore
  DEPENDPATH += ../src ${QNX_TARGET}/usr/include/qt4/QtCore
  
  include(config.pri)
  

  QMAKE_TARGET  = testapp
  PROJECT_DIR   := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST)))
  I18N_DIR      := $(PROJECT_DIR)/translations
  
  include mk/cs-base.mk
  

  
  http://www.qnx.com/schemas/application/1.0">
      com.example.testapp
      testapp
      1.0.0
      1
      The testapp application
      mja
      gYAAgAQEBXEMkIBptFYS5lLFGpY
      
          none
          false
      
      core.games
      
         armle-v7
         testapp
      
      
         Qnx/Cascades
         armle-v7
         testapp.so
      
      
         armle-v7
         testapp
      
      
         x86
         testapp
      
      
          icon.png
      
      icon.png
      assets
      
          
      
      run_native
      read_device_identifying_information
      access_shared
      
      
  
  

  I know it's hard to fix something like that, but maybe that someone has faced problems with graphicsview?

  Well, got running and have really no idea what I did. Let's see if I can fix the remaining bugs.

  Edit: once I got the correct libraries loaded, I think it's mistakes in qml who crashed the app.

• Impossible to get my work song go full screen. Worked well at the same time, and I click Ctrl

  I have windows 10 on a Lenovo laptop. I downloaded the images from the internet and using them as work for each song in iTunes. The use of ability "full screen" to work properly, but now it is (in gray), and I can't get the photos in full screen to come. The small images at the top still are appearing, but I no longer use (CTRL + left CK) to enlarge. Help, please.

  CTRL + click piece works here.

  Because you're running Vista what version of iTunes, you're running? You should be on 12.1.3.6.

  TT2

• Impossible to get multimedia work center Audio/concentrateur USB 5.1

  Hello

  I wonder if someone could help save my sanity...

  I used a laptop Toshiba Tecra A8 now for awhile with no problems. This forum works with Windows XP. I love it, its great, all except for one thing.

  I REALLY miss my Creative 5.1 speakers for listening to music in my room box when you work from home.
  They're just sort of stand there on the window sill, who yearns to be used...

  So, I thought, he MUST be an external USB card 5.1 sound I could buy in order to allow these speakers to be operational once more. Imagine my surprise when I found out that Toshiba is such a thing!

  In my simple way, I thought it must be the best solution, for the purchase of an accessory of the same manufacturer as the machine itself.
  It would be child's play and I would once more tuned to the end superior quality and punching bass... EVIL!

  Now, I have installed and uninstalled the software 3 times.
  The thing works pretty as a USB hub extra, not perfect, no probs at all, but try to get a single note of music of the thing? Forget it!!!

  I can get sound from Laptop speakers when the usb cable is not connected in.

  Whenever I do connect the multimedia center (?) to the laptop I get the wizard 'new hardware found' come & I'm too simple to be able to simply say this shit where files that are now necessary can be.

  So I ask, for all your powers to solve this problem before I charge the laptop, the speakers, the multimedia (?) in the car and go to the Toshiba headquarters at Addlestone to demand satisfaction.

  Thank you very much for everything that you can do to help me hear sound on these speakers.

  Soulster

  Nice story, but I can't find your poster a single word on this device.
  Can you please tell us the model?

• Impossible to get WebVPN working on chassis VPN 3030

  This v4.1.7P chassis works perfectly for our installation of the client vpn Cisco, no problem. We have decided to extend its usefulness by turning on and configuring WebVPN.

  I did it on a router IOS, Cisco 1841, works very well, so I'm following the same basic procedure to activate it on our vpn 3030.

  But when trying to connect to the vpn 3030 to the public interface of an internet ISP, I even don't get a login window, error, same no nothing. Finally the browser times out and stops.

  I did all the usual steps to enable WebVPN, yet nothing seems to work. I can't admin the box fine internally via https, so I know that work self-signed certificates.

  Any ideas where the attack of this of?

  Thanks, Jeff

  Hi Jeff,

  Try to upgrade to 4.7.x

  This generation of OS is fully operational with WebVPN.

  Check http://cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a008055641a.shtml

  You can ignore the Client SSL part and troubleshoot why didn't not now works for your environment.

  For a complete list of commands/options check:

  http://Cisco.com/en/us/products/HW/vpndevc/ps2284/products_configuration_guide_book09186a00801f1c6d.html

  Please rate if this helped.

  Kind regards

  Daniel

• Impossible to get to work recovery disks

  I'm not 100% sure which series is my laptop, but I thought that it wouldn't really matter much since it should have the same type of system recovery.

  I have 2 recovery discs. The instructions are to insert disk 1 and on the power of the laptop to hold key "C" to "Toshiba" appears on the screen. I've done it 3 - 4 times and I'm not getting the Recover menu.

  All I want to do is restore my laptop to its factory settings.

  If anyone can help it would be greatly appreciated.

  -Hydranis

  Hello

  Are you sure you are using the right drive?
  Usually the old procedure of recovery supports two modes; standard and expert mode.

  But first you need to boot from the disk right.
  Maybe you should try first with the second drive if the first disk does not start the lining check it out.

  If you want to boot from the CD/DVD drive and press F12 key immediately after cell ahs been powered. Then you could choose the ODD of the start menu.
  The CD must be inserted and then the procedure should star upward!

• App playBook on Dev Alpha Simulator - Exec format error

  I'm trying to run my application on the Simulator BB10 of Flash Builder. It seems to install with some success (creates an icon in the Simulator). But my application does not start and gives this error:

  Failed to create the application process: Exec format error

  Finally got it working by changing the NIC settings in VMware (change 'Share with my Mac' Ethernet). Restarted the Simulator and put the new IP address in the configuration of race of Flash Builder.

• My application is working on Dev Alpha C but crashing on Q10

  I had the following problem after my app has been reviewed by BlackBerry World:

  Perfect, thank you!

  I am not able to reproduce the failure. The application installs and runs on a Production of Q10.

  I went ahead and approved the application itself.

• Impossible to get to work when exporting to PDF page transitions

  Hi all

  I tried to apply page transitions to a document that I realized. I tried to apply the two side of the cover and push passes to each Board in the booklet but when I export to PDF does not work with either, I've seen full screen in Acrobat Reader DC, DC Acrobat and Foxit reader with no joy. With this in mind, I think it might be something to do with how I export as much research, that I've done was referenced InDesign CS6 was so different from what I look at in InDesign CC. Can anyone advise me as to what I can hurt?

  Thanks in advance

  You use file > export > Adobe PDF (Interactive) the Page Transitions defined from Document?

• Impossible to get Gallery working on the web server

  http://codadesign.NET/NewSite/design.html

  When you click the button on the design, the Gallery does not work. The thumbnails here, but when you click on it there is be a picture in full size at the top. Ideas?

  Your click audio file is not accessible.

  http://codadesign.NET/NewSite/sound/click.MP3

  It has not been uploaded to the web server or the file type is not allowed on the server.

• Impossible to get "rdcmndGotoSlide" work in CP4, but this market on the CP3, why is this?

  Hello!

  We have this project where we do some tutorial for this CMS with Adobe Captivate. I develop a videoplayer personalized to control the Captivate SWF files. I tried to make these buttons that the user can use to jump forward and backward between slides. All the tutorials are made with CP4. I tried to put the code rdcmndGotoSlide for buttons but it doenst work. I had a few tutorials CP3 earlier and tried to fight them with my drive and it worked fine! The thing is that the tutorials are ready but done under CP4 and I can't open the files with CP3 so that I could publish them with it and try if it will help. It's really annoys me because we have 2 weeks left and after that the project should be completed.

  You're welcome; (o)

  Good to hear, it worked. Be sure to mark your post as answered the other to take advantage of the solution as well.

  / Michael

• Impossible to get to work right tree

  I have written a sql to create a tree but I am now getting the error:
  ORA-20001: read_meta_data error: ORA-01436: CONNECT BY a loop in the user data
  
  Here is my sql

  select case when connect_by_isleaf = 1 then 0
              when level = 1             then 1
              else                           -1
         end as status, 
         level, 
         d as title, 
         null as icon, 
         r as value, 
         null as tooltip, 
         null as link 
  from (select 'Employee: ' || SUB_NAME d, SUB_NUM r, TASK_NUM parent from SUBTASK
         union all
        select 'Taskss: ' || TASK_NAME d, TASK_NUM r, PROJ_NUM parent from TASK 
         union all
        select 'DPI Projects: ' || PROJ_NAME d, PROJ_NUM r, null parent from PROJECTS)
  start with parent is null
  connect by prior r = parent
  order siblings by d

  Any help would be wonderful.
  Thank you
  
  Published by: KySarge1981 on August 17, 2010 14:32
  
  Published by: KySarge1981 on August 18, 2010 07:42

  You can try the NOCYCLE statement:

  select case when connect_by_isleaf = 1 then 0
              when level = 1             then 1
              else                           -1
         end as status,
         level,
         d as title,
         null as icon,
         r as value,
         null as tooltip,
         null as link
  from (select 'Employee: ' || SUB_NAME d, SUB_NUM r, TASK_NUM parent from SUBTASK
         union all
        select 'Taskss: ' || TASK_NAME d, TASK_NUM r, PROJ_NUM parent from TASK
         union all
        select 'DPI Projects: ' || PROJ_NAME d, PROJ_NUM r, null parent from PROJECTS)
  start with parent is null
  connect by
   NOCYCLE
   prior r = parent
  order siblings by d
  

  But first you have to find whence this loop.

  Kind regards
  Lev

• Impossible to get to work with HP Laserjet Pro CM1415fnw Airprint

  I recently bought the HP Laserjet Pro CM1415fnw and installed on my wireless network.  He appeared for updating the printer software, but none of my iPhones or iPad can find all printers on the network.  Help, please.

  The 1415, you download an application that runs on your computer and then installs the new firmware in the printer. You can find this program firmware here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=4089468&

  I hope this helps.

• BB10 Dev Alpha bezel Swipe

  I'm not able to get the action shot of bezel superior to register on the Dev Alpha for any of my applications.  I tried everything I found these tips and on github.

  I tried the sample project swipemenu.js WebWorks https://github.com/blackberry/WebWorks-Samples/tree/master/swipemenu. I packed up the sample application to the Alpha of Dev, and I can't get the hang of the bezel to work.  I can click on the button and trigger javascript code to display the menu, but this isn't really a shot of bezel.

  I added the BB10 the tag in my config file. I placed the following in my appssection (found here - https://developer.blackberry.com/html5/apis/blackberry.app.html#.event:swipedown).

  But I never see the alert, now how the shot of the upper bezel of importance.

  I also place the file javascript WebWorks (webworks - 1.0.2.9.js) in my application.

  I do not use the BBUI.js for this app because it causes too many conflicts at this time. Y at - it someone who has got the hang of the upper bezel to work in BB10 WebWorks app on a Dev Alpha device.

  OS version: 10.0.9.338

  10 BlackBerry WebWorks SDK 1.0.2.9

  you expect the event ready webworks and you enroll.

  https://developer.BlackBerry.com/HTML5/documentation/creating_a_bb10_app_2007539_11.html