Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

Similar Questions

• Get ESXI, up and running, but I have changed the NETWORK card settings, how do I fix? Help please!

  ESXi perfect on my server but stupid ass me were running so I

  play with the card NETWORK card and I changed to 1000 end, and it was

  100 MB and I forgot I was on a 10/100 switch,.

  in any case now I

  cannot ping or you connect the box to esxi...

  What should I do?

  The

  Server is a dual nic, should I connect the other cable network and

  Configure the which? will it work?

  I changed it using vSphere client...

  Connect a monitor, keyboard and mouse to the host (as when you installed and initially configured ESXi)... Connect to the host interface and select the option "configure management network". Clear the existing NETWORK card, and then select the second network card. You will have to regularize, save the configuration when prompted and let it restart the management network. You should be able to manage the host by connecting the client vSphere again. Then, you change the network configuration to match the new settings, or difficulty of the NETWORK card that you have initially activated to use.

  Is the host within a data center/server room? Why is the selector located only 100 MB? If the switch is able to go in the UK, ask that the host port ESXi will use either door to Go, full-duplex. Otherwise, you create a bottleneck, where it can be easily avoided.

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• How can Lexmark Z35, I get my printer to work with Windows 7?

  How can I get my printer to work with Windows 7?

  By looking at a site help on the lexmark, however this not is not supported under win7

• Try to download 14 items for a few days now and I get a message that says that I am not connected to the internet whenever I try. I tried all the troubleshooting solutions I can think. Any help please?

  Try to download 14 items for a few days now and I get a message that says that I am not connected to the internet whenever I try. I tried all the troubleshooting solutions I can think. Any help please?

  Suggest you contact Adobe

  Contact the customer service

• A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

  A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

  Means generally that you're trying to work on a layer locked.

• Impossible to get Pogo games to run

  I am running XP SP3 and MSE, now I can't launch Pogo games requiring Java (get an error saying that can not load images) that they suggest that I check the settings for the firewall (Windows) and security (MSE) antivirus settings. Don't know what to change to make me run these games.

  I was able to play these games before I made the mistake of installation of Registry Booster and speed up my PC of Uniblue and messed up my system. After uninstalling these two, I can't get the games to run.

  This probably isn't a MSE question and probably not a problem of Windows Firewall.

  And you have probably understood your problem, but it will be difficult for you to determine the changes made by the Registry Booster and "Speed Up My PC."

  Have you disabled temporarily MSE to see if the program will then work? Open MSE, settings tab, select real-time protection, and uncheck 'enable real-time protection '.  Make sure that you reenable the MSE.

  Have you disabled the Windows FW to see if the program will then work?

  Have you thought about a system restore to the day before where you installed these products the registry change.

• Impossible to install Brother printer (even with the latest drivers for windows 7). I suspect it's other print network drivers. During installation, the Brother software reports "the operation cannot be completed (error 0 x 00000706).» The print processor

  I upgraded from Vista to Windows 7
  When I try to add the printer manually, I can't select all ports.

  Plug the printer causes Windows to try to install a driver, but it fails.

  I suspect it was due to my University Pharos printing system. (It worked when I updated from Vista). After that I installed Win7 and started having all these problems, I was unable to uninstall due to errors of RPC ports. So I deleted manually and deleted all the registry entries.

  Installation of a Brother printer still does not work.

  Is anyway to reset all the settings of the printer? Wipe the slate clean? To restore all network ports?
  Thank you!

  ===
  Edit: I read other entries... My Printer Spooler kept crashing before and I had to restart via services.msc
  Also ran sfc/scannow without error
  Edit: I have since deleted all other printers listed in the management of printing, restarted, but still there is no listed ports.

  OK, I found the solution. It turned out that all my print processors and ports have been replaced by the Pharos system (used by my University to charge for printing) DLLS. After the upgrade from Vista to Windows 7, it did not work.

  They have become like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint]
  «Pilot '=' "PSS08B07."» DLL.
  "PSDriverLink"="winprint.dll".
  «C:\\Windows\\system32\\spool\\PRTPROCS\\W32X86\\PSS08B07 "=" PSDriverPath "."» DLL.

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\USB Monitor]
  «Pilot '=' "C:\\Windows\\system32\\PSS08B05."» DLL.
  "PSDriverLink"="usbmon.dll".
  «C:\\Windows\\system32\\PSS08B05 "=" PSDriverPath "."» DLL.

  etc...

  ============

  Manually, I changed ALL the print processors, drivers and ports in CurrentControlSet, CurrentControlSet1, CurrentControlSet2 to their original values and deleted the Pharos irritating ones.
  i.e.
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint]
  "Driver"="winprint.dll".

  etc...

  restarted and it worked!
  Too bad, the troubleshooting of Microsoft tool could not detect it.

  See you soon!

• Impossible to get Fallout 3 to run Windows 7. Tried everything, please help!

  So I literally disappeared EVERYWHERE and tried EVERYTHING and still not get my FO3 work :/

  I did the d3d9, tried every compatibility, fixed parts of the .ini I was supposed to and even tried the affinity. NOTHING WORKS. It still crashes very quickly once I have created a new game.

  If you have any other suggestions please let me know. I'd really like to play my FO3 :/

  Here is my card if they help:

  OS: Win 7 Home Premium 64-bit
  Model: Dell Inspiron N4110 (laptop)
  Processor: Intel (r) Core i3 - 2310 M CPU @ 2.10 GHz, 2 100 Mhz, 2 Lossnay, 4 logical processors
  RAM: 4 GB
  Graphics card: Intel HD integrated Graphics

  I know, that he should not have to do with my graphics card, because I know people who also have the game works very well with an integrated graphics card. Thanks in advance! ^_^

  
  And please no mods who just copy and paste the same answer to every question... I want to help legitimate working :/

  "I know that he should not have to do with my graphics card, because I know people who also have the game works very well with an integrated graphics card. Thanks in advance! ^_^"

  Just to unravel the terminology. There is no 'card' with integrated graphics. There are
  chips on the motherboard for some, but the graphics card Intel are part of the cpu.
  As with graphics cards, Intel HD graphics card not all are created equal, so if your machine doesn't have the same processor as the 'other' it doesn't have the same onboard graphics.
  You cpu has HD3000 graphics that should be enough run the game, but you have
  starting with some settings and resolution and work your way to the top if the game runs OK.
  In addition, the different laptop models have a different amount of VRAM dedicated, then
  If your model has only 64 MB of VRAM, it is less likely to work the game.
  If your machine is not the same brand and model and does not have the same software
  configuration settings and system as the 'other' it can not be compared accurately.
  Many small things add up to a big difference.

  Describe the crash - lock-up, black screen?
  Screen black accidents are common with FO3, and anything that can be done is to try and
  minimize them. camera comes with the question of four cores, or by using the settings too high.
  It can also be your anti-virus. Try disabling that before launching the game.

  "And please no mods who just copy and paste the same answer to every question...". I want legitimate help that works :/ »
  This is done especially in the absence of details ("my game not start what to do?)
  in the original post.
  You have to start somewhere and the cut and paste is generally these steps which must always be taken. There are no shortcuts to troubleshooting, and assuming that "which can not be she" can lead to more frustration, especially after several hours of stuffing about to find that's all (* headbang *).
  It said that some of the answers cut and paste are not yet on the subject, but it is a
  Forum of the community of civilians, would be nice.

  Ok then.
  -You tried the 'quad cord fix? You don't need with a dual core cpu and use
  may be counterproductive. Like the game runs better on two hearts he can also help
  to disable hyperthreading on the cpu, that two "virtual" cores more equals four.
  -That you have installed the game using Vista sp1 compatibility mode. (Note I said installed)-
  -You have installed the Windows 7 codec pack to solve the problem of ffdshow, or used another
  method.
  -You have installed all Windows updates
  -The game has been patched and you have not yet installed mods.
  -You do not use Anti-aliasing, Bloom, HDR or V-sysnc (which use too many resources for your HD graphics card).
  -Do you have a pagefile (virtual memory) enabled?
  -What parts of the .ini correct you?

  Clean boot is a viable option for troubleshooting software conflicts are always a potential-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Review the programs that you can run after you start in Windows as a potential
  Thus the conflicts. With minimum specifications, you need minimum stuff running while
  play the game. None of the browsers open, etc.
  Time to clean boot (or just by running msconfig) and clearing the check box next to
  any program in the Startup tab that you don't need to run in the background when loading Windows you can reduce the amount of resources used during the game.
  It may be a permanent framework. There are a lot of software that thinks it's important enough
  to start with Windows, do not...

  For more ideas try the forums Nexus-clicky and list in detail what you have tried,
  or risk all reread the same suggestions.

  You can also find something useful in the Guide to Tweak FO3 - TweakGuides.com
  .

• No printer Listed Port - can't get any printer to install on Windows Vista Home Premium - Please HELP!

  I was able to print to a Hp Officejet 4215 with no problems and a brother and then printer started to save as offline and would not print. Uninstalled all printers and tried to install a new HP Officejet 6310 printer. Ran the install disc included, but would get the message error, is went to the HP site and downloaded the driver, still received the error msg - Windows found a driver software for your device but encountered an error trying to install it. The specified port is unknown. and installation of the device software has no error. I went into control panel / Device Manager / USB controller group / and tried to uninstall - restarted the pc and still no luck. When I go to the control panel and try to install a printer, there is no port printer not listed and I can't add a new port.  I have connected the printer to another laptop running Windows Vista and recognized the new printer and installed the drivers and the impressions very well, but this laptop will not load the drivers. Help, please... Im a university student and desperately need to print!

  Hello

  All ports are used, and this is the reason why the installation goes through. We can uninstall these devices that are not in use and then try to reinstall the printer. Here's how:
  a. start, point to all programs, point to Accessories, and then click command prompt.
  b. at a command prompt, type the following command and press ENTER:
  Set devmgr_show_nonpresent_devices = 1
  c. type the following command a command prompt and press ENTER:
  Start devmgmt.msc
  d. troubleshoot the devices and drivers in Device Manager.
  NOTE: Click Show hidden devices on the view menu in device managers before you can see devices that are not connected to the computer.
  e. now navigate in imaging devices and then Device Manager expand it. Check if there are any devices that are not highlighted or blurred. Right-click on these devices and choose uninstall.
  f. repeat the same Universal Serial Bus controllers also.
  g. now try to install the printer.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Laserjet Pro M251nw color: How can I get my printer to work with Windows 10

  I can't get my printer to work, it is installed, I have updated the drivers, I get a message that it is not connected - I did it is certain

  Hi @jotsol,

  I see you are having problems printing from Windows 10. I'd love to help you.

  I wasn't sure if you meant that you run Windows Update to update the drivers or downloaded the last.

  I would say to uninstall all old software of the printer, if you updated to Windows 10. Then, download and install the latest drivers from HP. color HP LaserJet Pro 200 M251 series full feature software and drivers.

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  How is the printer connected? (USB, Ethernet, WiFi)

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• Impossible to get Pogo games to play with Windows 7

  Downloaded Windows 7 RC.  Unable to get Pogo games to run.  Any ideas?

  Hi christophe13500,

  Thanks for posting "Preparation for Windows 7" community forum.

  Are there codes error or information that you receive when you try to play Pogo games that you can include in the post on the forum?  In my Windows 7 Desktop, I am able to connect and choose and was able to launch a game, so it is specific to the configuration that is currently being used on the system.

  Have you tried to disable the modules for IE and then start the games.

  You can do this by clicking on start ORB / all programs / Accessories / System Tools / Internet Explorer - no add-on.

  Try IE running in this mode, then run again a game from POGO.COM.
  If in this state it does not save the error that you receive, or how the system reacts by trying to run the game.

  If you do not receive an error after disabling add ons, add the addons about half at a later time then try to launch POGO games again.  If the error occurs again disable some of the Add-ons that you enabled and try to see if you can identify which modules can cause the problem.

  Here's how;

  click on tools in Internet Explorer - select Manage Add-ons -there are about FOUR categories listed modules in, toolbars and extensions, search providers, accelerators, InPrivate filtering.  Click on each section and Add-ons for these items will be listed in the right pane.  Right-click on the status of each item individually, and then select Activate to get the module additional operational return.

  In summary, here are the steps that you want to fill;

  1. disable all add-ons
  2. launch Pogo - if it works
  3. turn them modules-about half of them on
  4 restart Pogo.  If it does not deselect some of the Add-ons that has been activated and launch the app until the offending service is identified.

  After completing all the steps of troubleshooting please re - enable all add-ons so IE will be back in a normal operating state.

  After you determine what addon can be the cause of the issue, you can reinstall this addon.

  Please keep us informed by referring to this issue.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Success Story with get switchable graphics to run on Windows 10 with one to Inspiron 15r / Inspiron 7520

  For background, some Dell laptops have a function where they use a low-power intel graphics card when running undemanding applications, but they spend a graphics card with high power, high power (series AMD Radeon) when demanding games is running. With the AMD/Intel version, it's a very fragile Setup and you can not download an older version of the drivers and expect to work. Dell engineers specifically design a version of intell driver installers that is compatible with this configuration.

  Pilot automatic/windows updates and changes to the OS can overwrite on this delicate configuration and you are at the mercy of the people of Dell support on when you will get an updated driver. If you use just the vanilla Intel video drivers, they don't respect the will AMD to take the chart control and the AMD video card will sit unused in your laptop.

  There are three parts to get Windows to use your preferred hardware driver, remove all installed software that provides drivers. This is done by uninstalling all the software that puts drivers on the hard drive. The second step is to remove all windows drivers is pegged against because Windows will not allow pilots used to be completely uninstalled. To do this put Windows in "safe mode" where it does not use most of the drivers and then uninstall and delete the driver files themselves. step final is to install your favorite drivers, the AMD and Intel video drivers in this case.

  Here's how I got AMD/Intel switchable graphics to work in Windows 10:

  1. I went on the site of dell drivers with Internet Explorer (not Microsoft Edge/Google Chrome/etc) and used the detection system to recognize my laptop. Then, I downloaded the video drivers Intel and AMD for 64-bit Windows 10
  2. I uninstalled all of the AMD and Intel video drivers via the Add/Remove Programs application in Control Panel.
     1. You can search for "Remove programs" in the search box in the windows bar to get the applet in Windows 10.
     2. There are a lot of Intel drivers for things like network cards, be sure to uninstall the drivers for video cards only.
  3. I started in SafeMode Windows 10. Search for instructions on internet to find out how to enter safe mode.
  4. I opened the control panel and went to the Device Manager to remove the video drivers left on the system.
     1. I think that currently used driver files are not completely uninstalled when you uninstall the software of the driver in the usual way, we must do more.
     2. Open Device Manager (a passerby is windows key + 'x')
     3. Open graphics cards, there should be one for intel and amd.
     4. Right-click on each graphics card and choose uninstall. Then click on the option button driver remove and remove drivers
     5. reset
  5. After the reboot, check that the graphics cards in Device Manager are very generic, they say probably intel or amd.
  6. Install the device driver software intel you downloaded from dell
  7. reset
  8. Install the amd you device driver software downloaded from dell
  9. reset
  10. You should now see the option "Configure switchable graphics" If you right click on the desktop.
  11. Try to run a game that requires a bit of graphics card
  12. Open the app "Configure switchable graphics" and check that it has considered the game that you just ran and that he put it to 'high performance '.
  13. fact

  Probably, you should be on a/c during all this power. I think that I heard that the switchable graphics may change if it is on battery power, not sure.

  Skyrim has worked after that, as well as the intros of l4d2 ran very slowly (they are incredibly unstable when they are executed on the graphics of intel), but the application itself crashed without warning on the desk, just as he finished a solo campaign of loading for me. I suspect that it's probably more a thing of windows 10 a graphical thing and hopefully reinstall the game will fix it.

  Well, my case is very simple. I just install the driver the newest Intel.com and amd.com, and everything works. I wish just that Dell can update driver Audio Conexant Audio Device.

  

• How can I get my printer to work with Windows 7?

  I can't get my printer Epson Stylus NX415 installed with Windows 7 Professional, I had recently installed on my computer.  I used to have Vista Home Premium.   and it worked fine.  I get the message, "Cannot be installed on this system of the window."  When I try to find the compatibility for this.

  How can I make my printer is compatible with Windows 7 so I can install it?
  Marsha

  Go to the Epson website and download and install the Windows 7 drivers

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=128287&infoType=downloads&platform=OSF_W_7-64

  It is best to ask in one place.

• try to get back program to run in windows 7

  Try to get a program back in to run in windows 7

  If she is 16 bits, then you have no chance except by creating a Virtual Machine and install an operating system in BACK... If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• Impossible to get 13 elements to operate on Windows 10. get a notice of default, announcing that a reboot of the machine may be pending

  Hello. I am running windows 10. I bought elements 13 and cannot enforce. I receive a notice of default, announcing that a reboot of the machine may be waiting. It is recommended that you exit Setup, restart your machine and try new installation ' I did several times but can't seem to download. I pressed the "ignore" button, but it will not install. Help, please. Thanks in advance. David

  You get any installation message that failed after having clicked on "ignore"? Please check: troubleshooting installation | Adobe Photoshop elements & Adobe Premiere elements for Windows & troubleshooting installation problems with the log files. CS5, CS5.5, CS6.