Impossible to get my work song go full screen. Worked well at the same time, and I click Ctrl

Similar Questions

• I can't get my game to play full screen on my computer. the same gamesiwantto in full screen on this computer game full screen on my othercomputers. Help

  that need to be addressed to get my gamesin mode full screen

  Hello
   
  (1) what version of operating system do you use?
  (2) game that you are trying to read?
  (3) what happens when you try to play the game in full screen?
  (4) that you get an error message or error code?

  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the assword or provide confirmation.
  2. in Device Manager, locate the device, and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you, and in what concerns:
  Suresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Two s flv on the swf page, button full screen on every fact the same full-screen go video

  OK, so I use CS3 to try to put two videos on the same page of .swf .flv, BUT only go full screen any button of the video for skin to go full screen I press, and all the rest of the buttons on the skin works for the appropriate video. I remember in Actionscript 2.0, in component for video settings, you can change the name of the field in the schema to play multiple videos in a .swf file, wondering if AS3 had a similar setting to the full screen.

  You are welcome.

  p.s. Please mark this thread as answered, if you can.

• How to get firefox 4 to allow two separate processes run at the same time.

  I'm used to be able to run two separate processes of firefox and so also run two separate user profiles at the same time as well. But I recently moved to firefox 4 and windows 7 and the other, or these two prevents the old method, I used to work. Basically I was running firefox (via 'run' or via an edited shortcut) with the following executable:
  p - profilename - noremote

  And it would launch a separate process that runs under the profile name. Is it possible to do this with firefox 4 and win7?
  I am a developer (web and desktop applications) and it is highly preferable to do so. One of the reasons is that, if one of the processes one falls, the other is fine. Another is to have separate profiles so that addons with leaks of memory, like firebug, can be run in its own process and I can restart when I have to without affecting other processes. I sometimes also need to set the processor affinity so that a process of firefox is not a big eater.
  Any help would be appreciated.

  The correct format for this command is -no-remote

• Bring item full screen after use of the 3D camera and changing point position/orientation

  Hello.  I am a new user of After Effects.

  After you apply the 3D camera and make adjustments and also make adjustments to a position of individual items and the orientation in 3D space.

  is there a way to get one full screen (and directly to the camera) once again, other than doing 'eye '?  Is there a feature or mathematics that will get the item mode full screen

  as if you do not apply 3D or or changes of position?

  Said another way, if I have several parts of the video on screen, turned them all 3D, changed that position and orientation, then applied a 3D camera and adjusted that

  so no items are full-screen one, then you want one of them to return to full screen mode, can add you values of parameters of the element and the camera may be a value

  which translates into a single element to a full screen/straight on angle (as if the 2D and not affected)?

  Thanks in advance for any direction.

  Hey brvid

  The easiest way is to:

  -Start with your image full screen

  -Click on the box for this layer 3D

  -Add a camera (which uses the current view for its zoom/position)

  -Add a null value, click on the 3D box so that the null value

  -parent the camera as NULL. That the null value has the same ISP values as image

  Now, you can duplicate this image and place around the scene in any position and rotation.

  - Then you can copy values ESP of other images as the key your null and the camera images will move to this image and it will be full screen

  Hope this helps,

  Steve

• every 20 minutes or so, the window disappears and firefox hangs for more than a minute. never happened before the last update; IE works fine at the same time

  Not much more to report - sometimes I can not switch to other applications.

  gel at regular intervals: see

  http://blog.bonardo.NET/2011/09/30/is-your-firefor-freezing-at-regular-intervals

  I installed the extension, it seems that there are several options to solve the problems with the places.sqlite file, I ran each option one at a time. I think that it may have helped a little, kind of hard to say. But the symptoms you report seems closely related to what is seen in the blog.

  As noted in the blog, uninstalled later expansion.

  Also, I try to restart Firefox when the CPU get more than 1 hour because things really slow down when the firefox.exe gets nearly 2 hours. For that I use "Restartless Restart" (for Firefox 4.0 and more)
  https://addons.Mozilla.org/firefox/addon/Restartless-restart/

  and I clear the cache in Firefox is restarted:

  • http://img232.imageshack.us/img232/4928/clearcachew.PNG

• Start menu Windows 7 lack of dialog box run; At the same time Star right Click of the mouse symbol does not work; more...

  This will provide some background: for several months, I had problems with Windows 7 (could not start normally, had to use the Safe Mode Networking - finally adjusted msconfig/services and began to access Windows normally - time during Safe Mode, I've resorted to the restoration of the system, tried twice, failed.) However, just 'try' restore, discovered many files, including the .dll was corrupt Restore execution.

  Currently cannot run Flash Player (current) v16.0.0.235. Exactly, I uninstalled and reinstalled several times, all to nothing done. Script errors are no longer constant, in order to be in line continues to be a nightmare. Menus in the program are not normal, just as text lists with no toolbar;  Half of my desktop program icons have the orange planet Firefox, not with the program icon or custom icon which they are responsible; the Start Menu appears now abbreviated, for example, that run the box is suddenly absent (access very important to me).

  Incidentally, I also have problems with Firefox and, above all, bookmarks in Gmail. As for the latter, I don't know if this is an integral part of I'm having problems with Windows, or as a result of the fiasco of ShockWave (Flash Player).

  Any help would be wonderful! Whether extensive or complex, step by step would be appreciated.

  Thanks in advance...

  LadyRJB

  Hi lady,.

  Welcome to the Microsoft Community Forum.

  According to the description of problem I can understand that you have difficulties running windows in normal mode, to access the computer in mode normal, you have to enter the mode safe mode with networking, perform the clean boot by msconfig to access normal mode and all your icons on the desktop has a symbol of Firefox instead of having the symbol of the actual program. Don't worry, we'll guide you to get the problem resolved.

  This problem occurs mainly because of the malware infection. I suggest you follow the below mentioned methods and check if it solves the problem.

  Method 1

  Malware scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: After running malware scan I suggest you to restart the computer, and follow method 2.

  Method 2

  Difficulty of file association

  A file association associates a file with an application capable of opening that file. More commonly, a file association, is a class of files (usually determined by their file name extension, such as .txt) associated with a corresponding request (for example, a text editor). A file association is a relationship between a file type and application of support. For example, a Word document can be associated with Microsoft Word. After removing some malware tends to corrupt the file, to your computer.

  Let him follow me fixit myself article in the article below.

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/, How to back up and restore the registry in Windows.

  I hope this helps. Write to us for assistance.

• HP C4480 printer suddenly refuses to work "incompatible cartridge" despite works well with the same cartridges

  HP C4480 use 350XL and 351XL Fortunately for 3 month suddenly do not print and says "incompatible print cartridges!

  What's past and how to fix it?

  Hello

  link below has how to contact HP customer support information

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  and the HP's Support Forums

  http://h30434.www3.HP.com/

• How can you get my position in Dock mode car to move in the same direction and orientation as your car?

  I use the car dock mode and my location, Google Maps (not Google Navigation), and I want the icon that shows drive me to go in the sense that I'm actually traveling. In other words, I want the plan to constantly flip and change direction so that my icon always moves 'up '. Is this possible?   Also, what is this circle with the crosshair icon in the lower right? I try clicking on it, but it doesn't seem to do anything.

  
  

• FBus Monitor may not work with Configurator at the same time

  I am using NI USB-8486 material and I can get Fbus Configurator work on it. But whenever I run the FBus monitor, the Configurator will go wrong. (Device on the Fbus become invalid)

  I checked the Configuration OR-FBUS Interface utility, I have seen that the use of the port can be either OR-FBUS or Bus-monitor.  Since the USB-8486 only has a port, it means we can only support a single application (Configurator or monitor), instead of two at the same time?

  I'd appreciate any help!

  Hi Steve,.

  That's correct - USB-8486 can function as an interface device or monitor buses at the same time, and the role is configured in intensive care.

  If you want to have two roles at the same time work, you will need two NICs installed.

• I click on an icon to open it, another one of the icons also gets stressed at the same time

  When I click on an icon to open it, another one of the icons also gets stressed at the same time and that one gets opened rather than I want to open... There seems to be a link between the two. It happens with different icons, not just the same.

  Hello

  You did changes to the computer before the show?

  Method 1
  Step 1: I suggest you to check if the problem persists in safe mode.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  
  Step 2:I suggest you perform the clean boot and check if the problem persists.

  I suggest to clean starts and then download and install the updates.
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  Also, the issue could be due to the virus on the computer. I suggest you run virus scanner online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  Method 3
  I suggest you to run the fixit from the following link:

  Fix broken desktop shortcuts and common system maintenance tasks http://support.microsoft.com/mats/system_maintenance_for_windows/en-us

• Get 2 SWFs to play at the same time?

  I have two sovereigns on the same web page and I am trying to get them to play at the same time only by clicking on one of them. How to make this happen?

  You can try to use the LocalConnection class:

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/NET/LocalConnecti on.html

• Impossible to get to work when exporting to PDF page transitions

  Hi all

  I tried to apply page transitions to a document that I realized. I tried to apply the two side of the cover and push passes to each Board in the booklet but when I export to PDF does not work with either, I've seen full screen in Acrobat Reader DC, DC Acrobat and Foxit reader with no joy. With this in mind, I think it might be something to do with how I export as much research, that I've done was referenced InDesign CS6 was so different from what I look at in InDesign CC. Can anyone advise me as to what I can hurt?

  Thanks in advance

  You use file > export > Adobe PDF (Interactive) the Page Transitions defined from Document?

• Impossible to get two printers same work (MG5420) on the same network home wireless

  I bought another MG5420 this week and I tried to configure it on my home wireless network.  It's on the wireless network.  However, the canon print utility seems could not find and it always go to the original one (old).  How to make both of them work on the same time?

  Thank you for your help in advance.

  found a solution

• upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

  TT2