Impossible to get online - reading HTTP/HTTPS/FTP Firewall problem
I cannot get online and diagnosis to assess the problem.
The error I get indicates that it is a firewall problem; However, when I disabled my firewall and tried to connect, it still wouldn't let me. I ran the diagnostic and received an error message that passport.com certificate is expired. It is said that the system could not connect over HTTP/HTTPS and FTP (passive) was able to connect. Help, please. Thank you!
Sorry try this first...
You can change the behavior of the Internet Connection Firewall by turning on various ICMP options, such as allow an incoming echo request, allow incoming timestamp request, allow incoming router requestand Allow redirect. Brief description of these options appear on the ICMP tab
If your network uses Internet connection sharing to provide Internet access to multiple computers, it is recommended to activate the shared Internet connection on the Internet Connection Firewall. However, you can activate the shared Internet connection and Firewall Internet connection separately. It's a good idea to enable the ICF on the Internet connection on any Microsoft Windows XP computer that is connected directly to the Internet.
Internet Connection Firewall can also help protect a single computer connected to the Internet. If you have a single computer connected to the Internet with a cable modem, a DSL modem, or a dial-up modem, Internet Connection Firewall protects your Internet connection. Do not cut the ICF for virtual private network (VPN) connections because Internet Connection Firewall interferes with file sharing and other VPN functions.
?????????????????????????????????????????????????????????????????????????????????????????????? OR
http://support.Microsoft.com/kb/936211/en-us read up on that let me know if this helped.
Internal modem
Warning Connect your computer directly to the Internet may be left vulnerable to attacks. To protect the computer against attacks, make sure that a firewall is installed and that the firewall is enabled on your computer. To learn more about the Windows Firewall that is included in Windows Vista, see the "Windows Firewall" section.
Windows Firewall
Windows Vista includes a firewall, called Windows Firewall. By default, the Windows Firewall is enabled. However, you should always check that the Windows Firewall is turned on before you connect the computer to the Internet. To verify that Windows Firewall is turned on, follow these steps:
- Click Startand then click Control Panel.
- In the search box in the upper right corner of Control Panel, type security.
- In the search results that appear, click the icon or the link to the Security Center. In the window that appears, you will see four bars that are titled firewall, automatic updating, malware protection, and other security settings.
- Click the arrow to the right in the firewall bar to expand the bar. The extended bar will display one of the following three options:
- If the firewall bar is green, it means that the firewall is enabled.
- If the firewall bar is red, you may see a message that the Windows Firewall is disabled. To turn on the Windows Firewall and cause the firewall bar to the center of safety to turn green, click activate now.
- If the firewall bar is red, and the message describes a problem with a third-party firewall program, we recommend that you disconnect the computer from the network and then contact the vendor of the firewall program for more information on how to activate the third-party firewall program.
Tags: Windows
Similar Questions
-
Impossible to get online - lack certificate
For the longest I got the "not genuine" version Not true - it is pre-installed on the IBM laptop! Now, I can't get online because it is said a certificate cannot be found or has expired.
You may need to update your root certificates. Citing KB931125 :
Package update root (scheduled for Windows XP only)
For users running Windows XP, the root update package updates the list of certificates root on your computer in the list that is accepted by Microsoft as part of the certificate program root Microsoft. The file is updated periodically to add or remove certificates roots or case of distribution by the program.The file is available for download from the Microsoft Download Center:
http://www.download.windowsupdate.com/msdownload/Update/v3/static/trustedr/en/Rootsupd.exeHTH,
JW -
I reformatted my computer dell laptop and installed a new copy of windows, now I can't get online to update. I guess that the software for my wireless card no longer exists. catch 22 can't get online without card cannot fix the map except online. can I download drivers for my FlashDrive from another computor and install them on my own? If so, how?
In addition to good advice of Tricky:
1. you may be (probably is) missing other drivers in addition to the wireless adapter (this may prevent you from using the NETWORK adapter cable to your laptop as an alternative to your connection Wi - Fi).
2. your use of the word "updated" makes me think that you can think about using Windows Update to get drivers. Don't, don't. Go to the Dell helpdesk, enter the serial number of your computer and you get a link to a driver package for your device. Read this FAQ from Dell prior to installation: How to download and install drivers in the Correct order.
-
Impossible to get online - Spinning circle in the taskbar after login
Windows XP
Skype 6.21.60.104
Today, I turned on my computer and logged on to Skype as usual. It connects fine but will not online. I only get the circle of rotation in the taskbar.
I tried uninstalling and reinstalling, I deleted all my anti-virus software with no luck.
My internet works fine on this computer, the only thing I have a problem with Skype.
I live in Spain and it's the only way I can keep in touch with my children back in England, so please HELP?
Any advice or assistance would be greatly appreciated.
Thank you very much
Rob Perry
Yes. I mean that you need to upgrade your Internet Explorer to the latest version of IE8. The latest versions of Skype will not work with IE6.
http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx
-
Until very recently, another person manages my site for me, but unfortunately not now the fact. I am trying to access my ftp site to change several pages, but my computer will not allow the page to be downloaded. It indicates that maybe that's a problem of Windows Firewall. When I followed the instructions for this, I like not to be turned off the firewall. OK but there is no way I can find to add the ftp site to the list of permits of contacts.
As I don't know anything about this side of the computer, it would be easier for me to create a new Web site and it would cost a lot. I would be able to use my current domain name.
Help please! I don't really know what to do.
Chrissie
Hi Chris,
The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the MSDN Forums. Please post your question in the MSDN Forums.
You can check the link to post your question:
http://social.msdn.Microsoft.com/forums/en-us/category/iedevelopment
I hope that helps!
-
HP Pavilion dv6205us had a blue error screen and only solution was to reinstall Windows. Have a Windows XP Pro disc, someone gave me and reinstall and repair. Tried to reboot the computer, it would not start. After several methods & attempts, I can restart now).
Windows XP is old version 2002 Service Pack 2. Need several updates and drivers who have not installed, the ethernet & network controllers are not available to log on the internet.
I have tried several sites but need to download a program. I download the program from another PC flash drive and install on HP; the program needs internet connection - is not available.
Went to Device Manager / found following: (yellow mark and code-28 points)
VINZ & DEV provided:
1180-0592 base system device
1180-0843 base system device
1180-0852 base system device
8086-1092 Ethernet controller
Network controller 14E4 - 4311
Device PCI 8086-27 d 8
8086 SM Bus controller - 27DA
Video controller 8086 - 27A 6
Video controller (VGA compatible) 8086 - 27A 2
Hello:
Here are links to the drivers you need:
First install the chipset driver and restart.
Then, install the Intel graphics driver and restart.
Audio:
All first install this driver... and restart
Then, install this driver and restart.
Ethernet controller:
Network controller: it's the latest XP driver for the card to your laptop wireless.
Base system device
Quick Launch buttons:
Modem:
-
Impossible to get rid of Security Suite on my PC (read all the other posts)
Hi guys,.
I also have problems with this security suite. I followed all the guides provided on the site to remove it, but it is always present. It looked as if it had been uninstalled, but returned shortly after the restart. I would rather not reformat my computer because it's a pain so wanted to know if there are other things I could do to remove it. None of the anti-malware programs have worked and I don't really dare to change anything in the registry because I don't know what I'd be looking at and could make things worse.
Thank you!
Sam
Hello
No one program cannot be used to detect and remove any malware. Added that often easy to
detect malware is often accompanied by a much more difficult to detect and remove the payload. If its
better to be too full now than to pay the price much later. Check with these extreme
Overkill point and then run the cleaning only when you are sure that the system is clean.Security Suite and AV Security Suite are fake antivirus, a scam to get you to pay for them
While they have no advantage.Remove Security Suite (uninstall Guide)<-- read="">-->
http://www.bleepingcomputer.com/virus-removal/remove-security-suiteHow to remove AV Security Suite (uninstall Guide)<-- read="">-->
http://www.bleepingcomputer.com/virus-removal/remove-AV-security-suiteIt can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
It's here.Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en-----------------------------
also install Prevx to be sure that it is all gone.
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all the security measures you
took (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro
--------------------------------------------Here are some free scanners online help if needed:
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------
Also do to the General corruption of cleaning.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
The interval can be changed to conn/http/ftp
I think I'm an overwhelming my BB (old version NCR) server with too much conn, http and ftp check the cause for suddenly show a ton of purple spinning icons on all these tests for almost all my monitored servers. Is there a way to reduce the frequency of these checks for some servers?
For example, I can specify the frequency of running scripts to post for example by adding a ";". "
' at the end of the trial, is there something similar for conn, http, ftp &? No, all the network tests are based on the same interval.
What is the current value of BBNETSLEEP?
you could always use the external fping.sh for connectivity test (conn) and set a specific time limit for this increase (or decrease BBNETSLEEP). To disable the test of conn in Sib, located in bbdef-.sh CONNTEST = FALSE.
Also, what platform and version are you on?
-
When I click on my Microsoft, it reads HTTP and 401. What should I do?
When I click on the Microsoft trial version, I finally bought. He reads HTTP 401. What should I do?
If you are referring to problems with Microsoft Office, they will help you in the discussion groups below:
Office:
http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx
Office newsgroups
Discussions of general issues of the Office.
They will help you with your office questions when repost you in the Office discussion groups above.
See you soon.
Mick Murphy - Microsoft partner
-
Turning the exception. Any suggestions?
ITES-*; "C:\WCS\oracle\webcenter\sites"\wem\*; "C:\WCS\oracle\webcenter\sites"\wem\lib\*; "C:\WCS\oracle\webcenter\sites"\Sun\lib\*; "C:\WCS\oracle\webcenter\sites
Atg.wcs.tools.CSDTClient "\Sun\jws\common\lib\*" Http://localhost: 8001/cs/ContentServer name of user = fxadmin password = xceladmin datastore = CRS cmd = import
2014-12-08 16:18:06, 907 [main] (DynamicInjector.java:119) - access using casInfo DEBUG http://localhost: Satellite/cs-8001? pagename = fatwire, wem, sso, casInfo
2014-12-08 16:18:06, 986 [main] DEBUG (DynamicInjector.java:192) - casInfo: class: com.fatwire.wem.sso.cas.CASProvider
2014-12-08 16:18:06, 986 [main] DEBUG (DynamicInjector.java:193) - casInfo: class: com.fatwire.wem.sso.cas.conf.CASConfig
2014-12-08 16:18:06, 986 [main] DEBUG (DynamicInjector.java:194) - casInfo: Base URL is http://localhost: 8001/AR.
log4j: WARN no appenders could be found for logger (org.springframework.beans.factory.support.DefaultListableBeanFactory).
log4j: WARN Please initialize log4j correctly system.
log4j: WARN see http://logging.Apache.org/log4j/1.2/FAQ.html#noconfig for more information.
com.fatwire.wem.sso.SSOException: impossible to acquire the TGT HTTP response code. 400
at com.fatwire.wem.sso.cas.CASProvider.getTGT(CASProvider.java:267)
at com.fatwire.wem.sso.cas.CASProvider.getTicket(CASProvider.java:159)
at com.fatwire.wem.sso.SSOSession.getTicket(SSOSession.java:137)
at com.fatwire.csdt.client.util.CSDTClientUtility.callCS(CSDTClientUtility.java:99)
at com.fatwire.csdt.client.main.CSDT.main(CSDT.java:31)
at atg.wcs.tools.CSDTClient.main(CSDTClient.java:68)
The address is correctly written? Another question, is the correct username? I can see fxadmin instead of the default fwadmin. Maybe you've created a chaled fxadmin but I ask just to be sure.
Best regards
Pedro
-
IaaS service is empty and get an error http 502 Infrastructure layout.
I have install VCAC 6.2 on Windows2012R2 and MSSQL2012SP1
There is no error when I install iaas.
Then:
When I check https://VA:5480 . Issa-service status is empty.
When I check https://VA/component-registry/services/status/current . And I get information
Exception during the recovery of the State remotely for url: https://IAAS/wAPI/API/status . IO Error Message error on GET request for 'https://iaas/WAPI/api/status': Connection reset; nested exception is java.net.SocketException: connection reset.
And when I check https://IAAS/wAPI/API/status . I can get the correct information.
So, how can I follow this error.
Thank you.
Hello
I think I saw a similar question.
In my case the problem was that the VA asked TLS 1.2 and the certificate side IaaS is with signature sha512RSA. Which seems to be not supported.
Check in the event log on the machine of IaaS if there are errors of
The event ID: TLS 1.2 connection request was received from a remote client application, but none of the suites of encryption supported by the client application are supported by the server. The SSL connection request has failed.
The event ID: -a fatal alert is generated and sent to the remote endpoint. This can lead to the termination of the connection. The defined protocol TLS fatal error code is 40. The Windows SChannel error state is at 1205.
If this is the case for you, you can either install the windows update recommended in this article
http://blogs.technet.com/b/Silvana/archive/2014/03/14/Schannel-errors-on-SCOM-agent.aspx
Or re - issue the certificate IaaS to use SHA256, SHA384, or
Let me know if this helped.
-
I try to get online with a home group
Original title: homegroup
I try to get online with a home group. My system works with my group?
Hi Babbleson,
1. who is the operating system installed on the computer?
2. what happens when you try to create a home group?
A homegroup is a group of computers on a home network that can share files and printers. With the help of a group residential allows for easier sharing. You can share photos, music, videos, documents, and printers with other people in your homegroup.
PCs must be running Windows 7, Windows 8, Windows RT or to participate in a homegroup. Homegroup is available in all editions of Windows 7 and Windows 8.
You can read this article for more information:
Reference:
Homegroup from start to finish
See also:
Why can't I create a homegroup?
http://Windows.Microsoft.com/en-us/Windows7/why-cant-i-create-a-HomeGroup
Hope this information helps. Respond with more information so that we could help you more.
-
Updates of windows installed and now unable to get online with the Explorer.
I am running windows vista and installed updates and now cannot get online. I tried to run the system restore, but that did not help. This happened once before when the only web sites that I could access were secure web sites, I have changed the security settings and that fixes the problem. Nothing works for now.
I'll get more info from my computer at home tonight and add to that tomorrow.
Thank you!!
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?
=========================
Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the webpage".
http://support.Microsoft.com/kb/942818If not help to tweak the parameters of your third-party firewall, try the following:
1. disable your antivirus, all modules of Norton (as applicable), a real-time protection provided by an anti-spyware application (with the exception of Windows Defender; includes the Tea Timer of Spybot, AVG AS guard.exe, SpySweeper guards, etc.), disable the third-party firewall AND THEN select Windows Firewall.
NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) except #4 below until your antivirus application has been reactivated! If you use a free ZA firewall, you may need to uninstall instead of disable.
2 uninstall 'update Cumulative security for Internet Explorer 7 (or 8) for Vista (KB976325)' or "Security Update for Microsoft Windows (KB976325)" via start | Control Panel | The Maintenance and the system (if you use Classic view, skip this step). Windows Update | Installed updates day & reboot.
3 d - c #1 above.
4 manually run Windows Update and install important updates available (i.e. KB976325).
5 reboot & make sure everything in #1 above is on again and, if necessary, disable the Windows Firewall and enable (or reinstalling) your third-party firewall.
=====================================
For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Cannot get online after installing windows XP Edition family on my laptop which was origally XP PRO
I have a laptop HP Compaq 6830 s that had xp professional did not get a disc of bone with it when buying. The system crashed 0x0000007B error code. I installed OS XP Home version Pro Version and now I't does not recognize my modem or ethernet. Cannot get online. I'll tho the HP site and they don't have that driver for XP Pro Downloads Home Version. I go to the Device Manager and have question marks on the following - ethernet controller (PCI bus 134, device 0, function 0), network controller (bus PCI 3, device 0, function 0), PCI Device (device function 27 of the PCI bus 0 0), Universal serial bus (PCI bus 0, device 29, function 7) (USB) Universal Serial Bus controller (bus PCI 0) (, 26, function 7 device), unknown device (on PCI bus) properties, the properties of the unknown device (on system compatible ACPI Microsoft) and the properties of video controller (VGA Compatible) (bus PCI 1, device 0, function 0) all the points mark have (Code 28). Is there any wat I can fix this or should I install OS XP PRO?
Go here--> http://www8.hp.com/us/en/support-drivers.html
Enter the model of your computer. If you just enter 'Compaq 6830 s' you get 3 choices.
For example, I clicked on the link below and select the link for "XP Professional" coming to this page--> http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3688717&prodTypeId=321957&prodSeriesId=3688712&swLang=13&taskId=135&swEnvOID=1093
You're right; There are a large number of items on this page. You may be able to refine things if you enter your full product number, but if not, here are some general indications:
"" For each of the downloads, click each tab on the download page and read the information on 'Description' improvements,' 'Instructions of Installation","System requirements"," Release Notes, "and"Revision history" before you install the downloaded driver.
- Start by "Driver - Chipset" and use "9.1.0.1007 a (January 16, 2009).»
- Then go to "driver - storage.» Install the Intel Matrix Storage Manager driver. Optional, but probably very desirable, install the new version of HP 3D DriveGuard. You probably don't need (at least for now), the driver of chip card reader (unless you have an external drive of smart card).
- Then go to "- Audio driver." Install the driver Microsoft UAA and the most recent drivers SoundMax ADI.
- Then go to 'Pilot - graphics.' Install the new ATI video driver.
- Then go to "driver - network." It's a little more complicated. Install the Marvel Yukon Gigabit Ethernet controller driver. This will allow you to connect to your cable or DSL or your router by Ethernet cable. You must determine if your particular laptop has an Intel or Broadcom wireless adapter. Looking in the Device Manager in the "Network adapter" section, you should be able to make this identification. Install the driver for the appropriate device. If you believe that your laptop is Bluetooth compatible, install this driver as well. The HP "wireless Wizard" is optional. I would delay installing this at this stage.
- Then go to "Driver - keyboard, mouse and input devices." Install the Synaptics Touchpad driver and one for the HP Quick Launch buttons.
At this point, most of your hardware should work correctly. If there is always warning icons in Device Manager, you should be able to understand... or ask again here. Read the 'Description' for other downloads to see if this is something you want or need. Be aware, however, that many "Software" downloads are only updates or patches and not the complete package (which probably would have been preinstalled on a new computer.
-
9.1 ok, nightly 10 ok, latest version has 11, breaks down until home page can open, submit accident report, but no one is getting to me. Been like this for 2 weeks.
Every night is 12 of Firefox (Beta 10 and Aurora 11).
You can try to install the last Nightly build if you want to check.
You can always expect problems with this test builds and he can stop working for a few days.
You can also try a new profile to see if it works.
Maybe you are looking for
-
HP Envy 15 t-as000: brand new HP Envy w / SSD: "Boot Device not found".
Hello I have a brand new (less than 1 week) HP Envy 15 t-as000 w / a 256 GB SSD. After the impeccable behavior for 1 week, the laptop can be started is no longer. No boot device is detected. If I try to run a diagnostic on the hard disk, the BIOS
-
kb915597 repeated installation and not some other updates can get on
This update kb915597 has infected once more my laptop. No other updates are given. I've checked all my updates and nothing. It's not even appear on my update history. last time this happened, I had to bring my laptop to original factory setting. What
-
No display of the thumbnail image only box just logo of the program used to open it?
When I open one of my photo folders the thumbnail view of all the photos in the particular folder will come with the logo of the particular show used to open it, but there is no display of the particular image. What should I do so that the images wil
-
How to connect wlc 5508 on 2 switches for redundancy
Hi, I'm planning implementation of WLC5508, but in the documentation is not clear how to connect WLC5508 to two chassis for redundancy. I do it with WLC4404, where I have the opportunity to choose the primary and secondary port for the management int
-
Cannot replace header - background.jpg - really...
HelloI already searched the forums and found response of a woman, which was that the file name does not include the extension. This isn't the case here. I even deleted the header image - background.jpg since the production site and it still shows up