Impossible to get PRTSCR DEL + keys to work on the Satellite A100

Similar Questions

• Impossible to get Samsung SSD EVO to work on the Satellite L50-A0424

  I tried these last days to set up an EVO Samsung 500 GB SDD on my laptop, a Toshiba L50-A0424 and I can only call an exercise in frustration. First of all, the Samsung comes packed with a SATA cable USB cloning of the original hard drive is a pain. After cloning, the next problem is the Toshiba to accept DSS. Make me 2 errors: if I change the boot mode in the UEFI I get an error "check media prescence.

  If I change to the CSM, I get a PXE - MOF - exit Intel PXE ROM. am using the latest version of the BIOS, ver 1.9. It is; s been proposals to downgrade the BIOS to ver 1.2 but when even did not do this. Any ideas on what I can do? Feeling puzzled and irritated and really regret my decision to buy a Toshiba

  Sorry, but I must ask you this question: is recognized by the BIOS of SSD?
  Have you tried to install original recovery image on it?

  I ask this question because I use Samsung SSD on my laptop older satellite and it works without any problem.

• Impossible to get Windows Vista Mail to work since the installation of FireFox

  In recent weeks, been unable to access the Internet or use any messaging service using IE8. Internet Explorer opens not - except in safe mode with network. I spent several hours to solve this problem without success. Then as a last resort, I downloaded and installed Firefox and in normal mode the page Firefox came and I have full access to the Internet and Microsoft Hotmail - however I can't get Windows Vista Mail to work.

  WMUtil is very easy to perform and can fix things.  Especially if you got rid of McAfee.  You may still need to remove your e-mail account and then add again, but it's also easy to do.

  Many people find Thunderbird much more preferable to alternatives to Microsoft.

  Steve

• My Fn key does not work on the Satellite A100-003

  Hello

  I ' v I just A100-003 with Vista, but reinstall W - XP. What driver I have to get a Fn key work properly? Only Fn + F5 (switch to VGA output) works well. I can't adjust brightness disp., sound mute or touchpad switch. Where can I find a driver for Windows XP Home edition solve this problem?

  Thank you.

  Hello

  Satellite A100-003 is a part of the PSAARE series. I visited the page European driver of Toshiba, but I found only the acoustic silence, help them and the driver sound
  Other XP drivers are not available.

  You can try to download and install the tools (Touch Pad on / off Utility, Hotkey Utility)
  etc.) Another A100 series I don't know but maybe it will work if you do not have to give up this feature m

• Nokia PC Suite does not work on the Satellite A100-234

  I installed the Nokia PC Suite in my laptop (Satellite A100-234) Unfortunately his does not work. The same cable and Mobile is to connect with other computers.

  Please send your valuable suggestions.

  Hello

  Could you please be more specific?
  Did you get the error messages or something else?

  Maybe something is wrong during the installation procedure
  So I recommend removing this Nokia program and try to install it again.

  In addition, I would recommend checking the PC Suite FAQ on the website

• Touchpad does not work on the Satellite A100

  Hello

  I bought a satellite A100 (PSAA9) and have a problem with my touchpad. For some reason, the keys do not respond sometimes and I have to press the Fn + Alt keys to solve the problem, and it works well. Later, he appears again and I didn't Kow why?

  The only thing I can say is whenever I press the key as alt Gr, the touchpad everything is blocked.

  In addition, when the keyboard is locked, my mouse is not working well (left click does not respond and do a right click does the same thing as a normal left click). Again, I press Fn + ALT and it's ok.

  Hope someone can help me please!

  Thanks in advance!

  ARNO

  HM, sounds like a very boring and weird problem. Have you tried to reinstall your system or at least a linux live CD to see if the problem still occurs if you start a different operating systems?

  If you didn t tried, then it would be useful. Maybe just a problem of software it s. But if so and the problem doesn´t want to go further, then you have a huge problem and your next step will be to put your machine to an authorized service partner. Why?

  Because if so, then you would have probably a hardware problem and you won´t be able to fix it yourself. The explanation is pretty simple and easy...

  Welcome them

• Video hardware does not work on the Satellite A100

  I have a satellite A100 and since my laptop has crashed by using Windows Movie maker videos do not play properly. Windows Vista has identified the problem as a video hardware error and after updating the driver BIOS and nVida as it says, it still does not work. Oddly enough, it works very well on Quicktime, but not Windows Media Player. I would be very grateful if someone get to help resolve me this problem.

  Hello

  installed a codecpack? Because how you describe this problem, it seems it s a pure software thing. If it works with Quicktime then Don t you have hardware problems.

  So, try the following:
  Google for "codecpack vista" and install it. Give feedback if it worked, otherwise you have to look any further...

  See you soon

• For Portege 3490 AC adapter does not work with the Satellite A100-159

  I have a supply of 15V 120W car (or plane Kensington). It works very well with a Portege 3490CT. It doesn't do a thing with my Satellite A100-159 new. The power supply provides also 15 V 6 a. Can someone tell me why the Kensington work?

  Or does anyone have a diagram to a power supply adapted myself, preference of 11, 5-14, 12(4) and 24 VDC (23-28: 8)?

  Thanks in advance!

  Hello

  I can give t you an answer why it does not work but usually you need to use the adapter for vehicle recommended by Toshiba. Incorrect adapter may damage the laptop!
  I think that the card for Portege 3490 adapter is not compatible with Satellite A100

  That the two car/truck/Air 120W laptop charger must be compatible:
  PX1237E-1NPO
  PX1235E-1NPO

• Touchpad does not work on the Satellite A100-812

  Hello, I just bought a Toshiba Satellite A100-812 (C. Duo, 2 GB RAM, GF 7600, Vista Premium). I disabled the synaptics driver in msconfig. After a while, I turned on the driver but Touchpad still does not work. All the fn buttons work correctly (turning brightenswith FN + F6 or FN + F7 etc.) but FN + F9 (turning the Touchpad) does not always work.
  Help, please.

  ([email protected])

  Hello

  you did a reinstallation of the driver? I think that if you have disabled it with msconfig, it should work after reactivation and otherwise, to remove this driver and install it
  Once again. (So the touchpad) driver should be available after reinstalling and restarting Windows.

  Would be recognizing a few comments if it worked. :)

  Welcome them

• Impossible to get free 3D glasses to work on the Qosmio F750

  Hello

  I tried to make it work on my Qosmio F750 without success. whenever I try to not calibrate the 3D using the face recognition, theres no poping window until the recognition of face, am I missing any driver?

  Hello

  Can you please post exact model laptop number?

  Usually the X-Tune: software must be pre-installed on a Qosmio F750.
  This software allows you to calibrate the 3D effect.
  http://APS2.toshiba-tro.de/KB0/TSB1C038D0000R01.htm

  Please be sure that Super-d Driver IC (V1.0.1613.809 or later) has been installed
  All these software and drivers should be available on the Toshiba driver page.

• Impossible to get 64-bit Vista to work with the software

  Should go back to XP or trust windows 7?

  We cannot advise you what operating system to use as your software may not be Compatible with it or the other.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  32-bit and 64-bit Windows: frequently asked questions

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to get a Multicam sequence of work since the update

  I have updates for Premiere Pro. Last mo nth I started a project with three different angles and was able to create and edit successfully the project without problem. Shot different project, same three cameras, same files and I can't do the sequence multicam sync anything. I tried all three views, any combination of the three, export to different type of files, nothing works.

  What gives?

  Any help would be appreciated. As with anyone else, I know, I have a deadline for this project.

  Thank you

  Running Windows 7 64-bit OS

  16 GB of ram

  I guess I'm not as crazy as I thought! Seems that I created the problem on my own. A sequence has two tracks, one I couldn't see not in view, and it was not sync'd up with each other. Once, I removed and made the multicam went right away and am at Midway through a ceremony of marriage to edition!

• Fn key/multi-media keys do not work on the Satellite A100-VA9

  This laptop came with Vista.
  I however don't like Vista too, so I installed my XP (dual system boots).
  Now, I have tried all the XP drivers for my model of website of toshiba and still can't find the driver for the Fn key and multimedia keys. Need help...

  Hello
  About the FN keys you need to install the XP BIOS do FN keys work in XP without the Flashcards. If the keys multimedia won´t work since there is no available XP driver.

  To download the BIOS, go here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Welcome them

• A few multimedia buttons don't work on the Satellite A100-201

  I noticed recently that my play/pause, next track and previous multimedia the track buttons do not work, but made the stop button. I read somewhere that the relocation of the common modules could solve the problem, but on the support page for my model of laptop I don't have a download for the common Module.

  Any ideas what's happening?

  Thank you

  What application is running when you try to use these media buttons?

• Vista + value added Package does not work on the Satellite A100-002

  Hello

  I have a laptop Toshiba Satellite A100-002, and I am running windows vista.
  I tried to install all the drivers, but I can't do it with value-added Packege. (VAP)

  I got this error message:
  [http://kepfeltolto.hu/i/?173242&t=img]

  I need that the programs included in the VAP.

  Pls help me!

  Thank you...
  David

  Hey Buddy

  Today, it's lucky day you ;)
  Why?

  I have a solution for you.
  The ID_ERR_NOTINSTALLTVALZ error message due to an old version of the BIOS.

  It should Flash the newest BIOS with compatible BIOS which can be downloaded from the Toshiba driver page.

  See also this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20471&MessageID=75256

  It describes the same problem and it confirms that a BIOS update should help.

  Concerning