Impossible to get sp2 & sp3 on recovered 2006 XP have checked all the settings, they are ok

Similar Questions

• I have 50 GB of iCloud and my computer is full because of photo storage problems. How can I get these pictures in my icloud? I checked all my settings. Everything is as it should be. I feel as if I had downloaded originals or something.

  I have 50 GB of iCloud and my computer is full because of photo storage problems. How can I get these pictures in my icloud? I checked all my settings. Everything is as it should be. I feel as if I had downloaded originals or something. I don't know how to understand it. I Googled, I tried to get on my computer. Emptied my Recycle Bin and my download folder. I know I must be missing something.

  We need to switch to "Optimize the storage of Mac", see it - http://www.imore.com/how-save-space-optimized-storage-and-icloud-photo-library

• Impossible to get rid of Security Suite on my PC (read all the other posts)

  Hi guys,.

  I also have problems with this security suite. I followed all the guides provided on the site to remove it, but it is always present. It looked as if it had been uninstalled, but returned shortly after the restart. I would rather not reformat my computer because it's a pain so wanted to know if there are other things I could do to remove it. None of the anti-malware programs have worked and I don't really dare to change anything in the registry because I don't know what I'd be looking at and could make things worse.

  Thank you!

  Sam

  Hello

  No one program cannot be used to detect and remove any malware. Added that often easy to
  detect malware is often accompanied by a much more difficult to detect and remove the payload. If its
  better to be too full now than to pay the price much later. Check with these extreme
  Overkill point and then run the cleaning only when you are sure that the system is clean.

  Security Suite and AV Security Suite are fake antivirus, a scam to get you to pay for them
  While they have no advantage.

  Remove Security Suite (uninstall Guide)<-- read="">
  http://www.bleepingcomputer.com/virus-removal/remove-security-suite

  How to remove AV Security Suite (uninstall Guide)<-- read="">
  http://www.bleepingcomputer.com/virus-removal/remove-AV-security-suite

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  It's here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  -----------------------------

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all the security measures you
  took (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro
  --------------------------------------------

  Here are some free scanners online help if needed:

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------

  Also do to the General corruption of cleaning.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

  Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

  Hi woodysk

  Greetings.

  • You will need to read and write permissions on the Adobe folders manually.

  Please follow the steps below:

  • Right-click on the icon in the Finder and select the 'Go - To' folder option.
  • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
    • ~/Library
  • Then go to the Application Support > Adobe.
  • Right-click on the Adobe folder, then select the GetInfo.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Please click on '+' symbol, it will open the list of user accounts.
  • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
  • Click the gear icon and select apply to closed. Close the dialog box for information.
  • Then launch Lightroom application and check.

  Let me know if still face you any issue.

  Concerning

  Rohit

• I am using Windows XP Pro SP3. IE8 or FF8 can open all the links that appear in my subscription newsletters.

  original title: links in e-mail newsletters don't work

  I am using Windows XP Pro SP3. IE8 or FF8 can open all the links that appear in my subscription newsletters. The message I get is:

  Firefox can't establish a connection to the server...

  Because this happens with both browsers, I suspect that some settings in Windows is the origin of the problem - maybe an update. Everyone knows about this type of behavior? Someone at - it suggestions for me?

  Hello

  This information should be useful.

  1. the HOSTS file would have an impact on all browsers. If you do not deliberately use the HOSTS file to block some websites, run the FixIt in this article to reset (clear on) the HOSTS file.
  How can I reset the default Hosts file? :
  http://support.Microsoft.com/kb/972034

  2 key is only, but go to Internet Options > privacy and try a cookie of low value or accept all.

  3. from security on the IE command bar > InPrivate filtering settings, disable filtering.
  Always safe > Filter SmartScreen > disable the SmartScreen filter.

  4 disable third-party security programs (antivirus, antispyware, firewall, etc.) * just long enough * to test some links.

  5. similar to the #3, but more in depth...
  The clean boot troubleshooting, try.
  331769-how to perform a procedure to clean boot (XP & Vista)
  http://support.Microsoft.com/kb/331796

  Don

• I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information?

  Taché product key

  Hello

  I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information? The laptop currently has non-OS I've tried to reinstall.

  Thank you

  Scott

  Product keys are bit-agnostic - they don't care if it's 32-bit or 64-bit.

  However, cannot legally use the recovery disk from one computer to a different constructor machine - as other licenses are not properly paid..

  There is nothing nonetheless to try all possible variations on the absence of character (there are only 25, after all the )

  Other than that, your best option is to contact the manufacturer and order a set of recovery disc for the machine. I do no download available for Vista with SP2 - but you can download Vista with SP1 and create the disc.

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

• I get two appearant virus JS/Crypted.A1.gen and asoupdate.exe what they are

  I get two appearant virus JS/Crypted.A1.gen and asoupdate.exe what they are

  Go through these stages of systematically General malware removal:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Include analysis with David Lipman's Multi_AV of and follow the instructions to do all scans in Mode without failure. Read the Special Notes about the use of Multi_AV in Vista.

  http://www.elephantboycomputers.com/page2.html#Multi-AV - instructions
  http://tinyurl.com/yoeru3 - download link and further instructions

  When it failed, download Guided Help. Choose one of the specialty forums listed on the first link. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

• Using {module_data}: is it possible to get all the customers who are subscribers to 2 specific secure areas

  Using {module_data}: is it possible to get all the customers who are subscribers to 2 specific secure areas?

  That is to say: the list of all customers who subscribe to the secure area 51 and 6387 id.

  I am trying the configuration that you can see in the link below but is not working - I think that each customer is listed separately for each secure area, rather than listing a single customer and subscribed them to safe areas.

  2015-10-02_16-01 - 54.png - Google Drive

  I want to all clients in the CRM that match the criteria, not just check if the user matches the list.

  I can get it working for a secure or using GOLD, but the operator AND does not work in this case.

  Any thoughts?

  Do I have to run two separate (one for each secure area) calls, then compare the two somehow? Keeping in mind the 500 limit because it will look at the whole CRM.

  Hi Adam,.

  and do not work, as the system is testing to see if there is an object with two identity documents at the same time.

  What you can do, is useas follows:

  {module_data resource = "zonecustomers" version = "v3" fields = "customerId, IDZone" skip "0" limit = "100" = where = "\ {"IDZone": \ {"$dans": \ [51, 6387\] \} \}" order = 'zone ID' collection = "twoSZ" "}

  Yes, this will get duplicated in the result. Simply add the ID to a string, split to table and sort. Just made this to get unique products of 2 catalogs converted for your use case.

  EDIT (added a quick feature to find all of your customers)

  {module_data resource = "zonecustomers" version = "v3" fields = "customerId" skip = '0' limit = '1' where = "\ {"IDZone": \ {"$dans": \ [6524, 6664\] \} \}" order = 'zone ID' collection = 'howMany' "}

  {assign % max = howMany.totalItemsCount-%}

  Total customers: {{max}}
  

  {% assign limit = 500 - percent}

  {% assign moduloCheck = max: modulo: limit %}}

  {% If moduloCheck == 0 %}

  {% assign totalPages = max | divided_by: limit %}}

  {% other %}

  {% assign totalPages = max | divided_by: limit: more: 1 %}}

  {% endif %}

  Total pages: {{totalPages}}
  

  {% assign string = ' '-%}

  {% for i % (0.totalPages)}

  {module_data resource = "zonecustomers" version = "v3" fields = "customerId" skip = "{{limit |}}"} "{{time: I}}" limit = "{{limit}}" where = "------{'IDZone':------{'$dans':------[6524, 6664\]------}-}" order = 'zone ID' collection = "twoSZ"} "

  {% for article on twoSZ.items-%}

  {capture string %} {{item.customerId}},{{string}}{% endcapture-%}

  {% endfor}

  {% endfor}

  {% assign array string = | split: ',' |} Tri-%}

  {% assign UniqueId = ""-%}

  ID sorted

  {{ array | json }}

  {% assign index = 0-%}

  {% for a table-%}

  {% If index ==-%}

  {capture UniqueId %} {{a}}, {{uniqueIds}} {endcapture %}

  {endif %}

  {% index assign = a %-}

  {% endfor}

  Your customers

  {{ uniqueIds | split: "," | sort | json }}

  I had over 1000 clients. For me it loads quite fast...

• Impossible to get my 3560G switch talk to ESX 3.5 and the EMC NAS servers.

  I tried for the past two weeks to get my 3560G switch to talk to a couple of ESX 3.5 servers, but VC and the EMC NAS. The goal is to implement 2 Etherchannels on the physical switch and aggregation of NETWORK cards on the vSwitch. A port-channel will have 1 VLAN it crosses, and the other port-channel will have 2 VLANS across it. VLANS have been implemented on the vSwitch mirror the VLAN I have on the 3560G. I want to (have to) use the load balancing. Also, I read other forums and websites to get ideas on how to implement, and every solution is different from the other. The problem seems to reside mainly in the configuration of VLAN on the physical switch in my humble OPINION, because if I just switch a switch, dummy can talk without problem. The following information, I already know, not because it's my requirement, but rather the parts that must be present for the entire configuration to succeed.

  All interfaces in an Etherchannel must belong to the same VLAN or considered trunks. I take this means that for the second port-channel, I have to configure interfaces as the trunks, since I need 2 VLAN different to go the link.  -I tried to configure them as trunks and the ports of access, and none seemed to work.

  vSwitch must be configured to "Route based on the hash of the intellectual property."

  port-channel - the load balancing must use the src-dst-ip option.

  FlowControl receive desired must be set

  Jumbo mtu 9000 system must be set to

  Here is an excerpt of my configuration:

  src-dst-ip port-channel load-balance

  No file verify auto

  pvst spanning-tree mode

  spanning tree extend id-system

  !

  internal allocation policy of VLAN ascendant

  !

  Interface Port-Channel 1 - Port-canal2 is configured similarly to this one.

  switchport trunk dot1q encap

  switchport vlan trunk native 2

  switchport trunk allow 3 - Po2 allows instead of VLAN 4.5

  switchport mode trunk

  !

  interface Gigabitethernet0/1-gi0/1 - 20 are configured similarly to this one.

  switchport trunk dot1q encap

  switchport vlan trunk native 2

  switchport trunk 3 - gi0/13 - 14 permits vlan 4 and gi0/15-20 allow vlan 5

  switchport mode trunk

  FlowControl receive desired

  channel-group mode 1 on

  !

  Interface Gigabitethernet0/21 - 28 are stop

  !

  interface Vlan1

  no ip address

  Shutdown

  !

  interface Vlan2

  IP address x.x.1.2 255.255.255.0

  !

  interface Vlan3 - 5 are configured identically

  no ip address

  !

  IP default-gateway x.x.1.1

  This should be enough to give you an idea about where I am and where I belong. Any information you can provide would be greatly appreciated!

  Hello

  You config works without using etherchannel?

  On the ESX, I think that the vlan native is 0, you describe that?

  In addition, you use the 3560 as layer pΘriphΘrique layer-3 2, right?

  Reza

• Unable to connect to the server on Money 2006 and have not changed the password

  Money 2006 can not connect.  The server is down?  I have not changed my passwd.  Help!

  Original title: Money 2006 cannot connect. The server is down. I have not changed my passwd. Can you help me

  Money 2006 can not connect.  The server is down?  I have not changed my passwd.  Help!

  Hey oldturkeyhunter

  you will get the best support if repost you in the forum of money microsoft specific to the link below

  Use this forum to discuss Microsoft Money. This includes money, more and more older versions.

  http://social.Microsoft.com/forums/en/money/threads

  Walter, the time zone traveller

• Can we get all the contacts that are in the Blackberry phone using the PIM functionality that is, JSR 75?

  Hello guys,.

  I need to develop an application that should support devices such as the Bold 9700 and Pearl, Storm, Blackberry Curve 8900. If I go for j2me / MIDP, what will be the limits that I face in blackberry? Is it recommended to go for j2me or device-specific development of RIM.

  Can we get all contacts into the Blackberry phone using PIM JSR 75 i.e and other native features features if developing an application in j2me for blackberry. I guess that the user interface will be completely different, but we support all the controls that supports the JDE?

  Is someone can you please tell me if I can get access to all contacts present in the Blackberry phone using 'javax.microedition.pim' API - that is not specific to the RIM. Has anyone tried this one virtually on the phone or emulator?

  Y at - it something like a website where I can test my application on Blackberry devices as in the Nokia Forum Sites?

  Thanks in advance.

  Kind regards

  Raki

  JSR75 is supported

  However, there are some extensions specific "Blackberry" for the base PIM classes. These add a few extension Blackberry PIM data. I think that you can only use the JSR 75 classes as long as you don't need BB extensions.

  For the test, the development environment provides the device simulators.

• Impossible to get a resulting fields vo as value (quantity * price) * rate/100 in another area as the quantity.

  Mr President

  My worm jdev is 12.2.1.

  Me trying it to get a value of L'Express (quantity * price) * rate/100 in a vo field where quantity, price and rate are also fields of vo.

  How to get it?

  my picture is

  

  Help, please.

  Concerning

  Hello world!

  I managed to get the value in the column db by this method in doDML()

      protected void doDML(int operation, TransactionEvent e) {        
  
          if (operation == DML_INSERT)
                     {  
  
                       setAmount(getPurqty()*getUnitpurprice()*getStaxrate()/100);
                     }
          super.doDML(operation, e);
      }
  }
  

  Concerning

• All of a sudden get mail entering, but cannot mail not have checked the settings

  Thanks to your volunteers!

  Up to late last night, my outgoing email was working fine.

  Then when I tried to send a complex message that referenced multiple e-mail addresses (do not know if this is part of the question), I could not send the message. The process stopped at about 47% of fact, so I eventually canceled.

  Since then, whenever I try to send via Thunderbird the system times out with the following error box message:
  "The message sending failed. The message cannot be sent because the connection to the server of SMTP mail.twc.com expired. Try again or contact your network administrator. »

  I have confirmed my outgoing mail settings, including the port 587 with technical support Time Warner Cable, and I have confirmed that my mail into and out of Time Warner works very well in their WebMail.

  I searched files *.eml under Temp by a score of Trend Micro for Thunderbird taking over 30 seconds to send and have found no delete.

  Any other ideas?

  Thank you!

  Lydia

  At least, he confirmed that their server was not the problem (it is running etc.) and make sure that these settings are correct and up to date is one of the steps mozillaZine told me to do the theme of "Cannot send mail", sub-heading of basic troubleshooting.

  During this time I find another piece of advice Thunderbird online (I note where) who told me to run Thunderbird without addons, and I managed to find where in Thunderbird to disable them.

  I was then unable to get Thunderbird to run at all (by clicking on the icon did nothing) BUT when I rebooted by computer, I was back in business and a moment later successfully send email - and very quickly as in ancient time before sending had begun to slow down.

  So I'm all set. This can help others, maybe, so I'm documenting.

  In response to your comment, it's a shame that so many help desk people are forced to stick to a script, isn't. But I found some very useful from time to time when the problem did turn out to be at an end.

  Please read and respond, in any case.

  Lydia

• I transferred data from backup, but have not all the books that were on my Kindle App. How tdo I get back them?

  I upgraded to the iPad 2 Air after all iCloud backup data transfer that I found I was missing most of the books from my kindle app that were supposed to be in the cloud. How can I get the my new iPad?

  If they were purchased through the Kindle books (i.e. Amazon) you can open the Kindle application on your new iPad, if not already in the tap of the library the 3 bars on the high left and click library, and then tap cloud down, tap and hold any book in your library and then on download. All purchases are stored by Amazon and can be downloaded at any time.

• Every second a link or I click on getting me to unwanted redirected Web sites, Ive tried all the antiwormspyware and it does not happen with Chrome or IE

  For the last few months since I've updated last Firefox when I do a search on google for the most part, but sometimes of other links too sometimes. I click on a link and more than half the time it redirects me to websites virus, pirates, games of chance or porn. Ive tried to find a worm or a malware with all known antivirus-antispyware programs, but nothing. I know it takes some malware or trojan but can you tell me are you aware of this and if so how can I get rid of him. I prefer to use Firefox for Chrome, but it can't on Chrome, so it must be a specific problem of Firefox

  It could be from a malicious add-on or 'search bar' which has installed without your permission. Check your add-ons to see if you have no matter what you do not recognize. Also, are you using any "bars," extra in addition to your navigation/menu/bookmarks bars? Sometimes adware disguised as research tools for your browser.