Impossible to get the touchpad to work - Tecra M2

I have unknown device in my device manager.

Touchpad does not work but can use the usb mouse.

ALPS Touch Pad driver and Toshiba double pointing device utility installed.

It is a Tecra M2.

David

It is not necessary to create a second thread on the same topic.
You must follow your first thread here:
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=179662

Tags: Toshiba

Similar Questions

  • Win 7 - impossible to get the screensaver to work

    Windows 7 works very well so far, but I can't make the screen saver turns on with or without putting a time intreval.  Even when I select the option for the login screen to display when the screen saver is cut... usually not work either.

    I set and reset the screen saver mode in the section 'Customize' to prevail, any ideas?

    the information provided, you are using a 64-bit machine x,

    have you downloaded the windows7 x64bit version
    also when you burned the iso file to a disc did you have burning program check you the disk

    as I know that its possible to have defective sectors on the disks.

    so its worth it to take a little extra time and do check Fujitsu Siemens MS-6567V2 2.0 Board by your burning program: clock Bus Micro Star MS-6567V2 2.0: 133 megahertz BIOS: American Megatrends Inc. 07.00 T 06/04/02 2.40 gigahertz Intel Pentium 4 8 kilobyte primary memory secondary memory of the 512 KB of cache cache of 512 megabytes installed memory 1024 megabytes installed a Slot memory ' 0' has 512 MB Slot ' 1' has 256 MB Slot ' 2' has 256 MB Slot '3' is empty Standard VGA graphics [graphics card] generic PnP monitor (15.7 "live, June 2004) NVIDIA nForce (TM) MIDI UART Realtek AC 97 Audio unsupported Standard Game Port PCI CX11252 - 11 Modem IC Soft more IP100A 10/100 Fast Ethernet adapter Dhcp Server: none responded Microsoft 6to4 Adapter Microsoft ISATAP Adapter Microsoft ISATAP Adapter #2 Realtek RTL8139/810 x Family Fast Ethernet NIC courtesy of the GeForce4 http://www.belarc.com/free_download.html MX 440 - SE AGP 8 X Fill Rate: triangles per second: memory bandwidth: Maximum memory: reserve 1.1 billion Texels/s 34

  • Conductor 3.0 with 10.5 of the Complutense University of MADRID - cannot get the AdHoc questions work/TLS record

    I'm working on a laboratory configuration to prepare application a client driver 3.0 with 10.5SU1 of the Complutense University of MADRID.  I have the base line everything up, but I can't get the Ad Hoc conference bridge to enroll at the University Complutense of MADRID by the conductor, nor I can SIP trunk to become accessible.  This all points to a TLS problem, which is reflected in the newspapers of the Complutense University of MADRID:

    Pre-verifie SdlSSLTCPListener::verify_cb = 0, cert check errno = 20, depth = 0
    00269848.000 | 22:41:54.023 | AppInfo | HandleSSLError - verification of the certificate has no:(Verification error:20)-Impossible to get the certificate of the local radio station for 10.0.0.113:41409

    This repeats for the Ad Hoc and appointments of the intellectual property on the driver.

    I followed the conductor with the guide of the AAU (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/con...) as well as the deployment of certificate (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/con...) guide.  I have a root certification authority I use (lab.local), I installed the root certificate and the certificates of the host on both devices.  OpenSSL gives me the verification of the return code: 0 (ok), at once UCM and conductor during validation to the root certificate.

    I think that I followed the guides and double-checked against them.  Someone else has seen this? What Miss me?

    Hi Ryan,

    I think that I am running into the same question... The TAC engineer gave you a bug ID I can follow?

    Thank you

    Peter

  • Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

    Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

    Nevermind, I finally got it to work, thanks!

  • Re: How to get the Tempo to work properly?

    Hello

    I have problems with the service of Tempo.

    I don't get updates via this application (all the settings of this application are accurate, i.e. "full control"). I know this because there are updates available online to my laptop via the pilot site of toshiba.

    When I installed first Tempo, updates for about a month, I received, and then all of a sudden, no update came through. My firewall is blocking either of this application.

    I tried to reinstall the application, but no change in the situation.

    Does anyone know if ALL updates are available via the website of driver toshiba out tempo? Because, in the month that this service worked, I got an update of the bios, but I recently saw a bios update online and Tempo has not always reports that it is available.

    Any ideas on how to get the Tempo to work properly?

    Thank you.

    I saw in your other thread you have installed SP1 on your Vista laptop.
    There may be some compatibility problems between SP1 and Tempo

    And Yes, as far as I know Tempo bring all available updates!

  • Unable to get the restore to work - Satellite 1410 disc

    I have a Toshiba Satellite 1410. During a restore of system with restore disks, I forgot to plug it. During the windows set up (this screen where you put in your country and all that) the battery has flat that I plug!

    I tried to throw the disc again, as it came with a box when I rebooted that said "the system is not fully restored. Please re-run Setup '. So I turned off and restart, then the message goes up after that windows image appears during startup.

    I bought this laptop second hand so I have all the manuals or books with him, I do not know the keys on which support to MSDOs not that I know what to do from here, I do not know which key press during boot up to get the CD to work, I have pressed the keys left right and Center and found exhaust takes me to a page of the system but anything to get the CD to run again that I thought would get just the restoration will once again.

    So now it starts up saying ' not completely restored system, please run the installation again.

    Someone know or seen this before, and someone can tell me if there is a simple answer, which key support during the start up or how to fix this?

    Thanks in advance.

    Hello

    As Daniel said in the first assignment by pressing the C button the laptop should boot from the disc. Please press that several times the C immediately after the laptop from.
    Then you can be sure that the option has been enabled.

    The other possibility is to enter the BIOS and then to change the initialization of the order on CD/DVD first

  • Satellite C660 - 18 c - can't get the microphone to work

    So, I couldn't get the microphone to work so I bought a new one. I also can not get this to work. I tried everyway I can think of and he will simply record is not all sounds and yes the microphone is on and the volume is full.

    Can someone please help me solve this? Its driving me crazy!

    Hi belthazora,

    Just to make sure that we are talking about an external microphone that you have connected to the microphone jack and not internal? I ask this question because the laptop doesn't have the internal mic.

    Anyway, if you use an external microphone ensure that it s listed in sound devices under the recording tab. You see it there?

    I also recommend an update of audio driver if it doesn t work. You can download all the updates on the official page of Toshiba:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  • Satellite L20-153 may not get the WLAN to work

    Hello world

    I have a problem with my laptop wifes that I've not been able 2 fix.

    Its windows had crashed and wouldn't start in 'BACK' keept marker just flashes and nothing happened, I tried to restore to later work windows, but that did not help, nor the integrated security mode. So I took out the CD/DVD recovery and tried to do a new installation, the configuration of the installation has functioned well until he asked me 2 remove the disc and restart the comp I did.

    When it restarts the same problem appeared (flashing marker and nothing happens).
    So what I did I took a normal windowes XP (SP2) and reinstalled eveverything (I formatted the drive also) and rebooted and it worked.

    2 my next challenge is 2 get all the hardware working I got all all work, but the WIFI network (integrated).
    After I installed everyting I saw my network wireless but next time I started the comp, it disappeared along with all other WLANS that I use to be Alba 2 see. and when I still have refreash sound empty.

    I tried to disable it and then turn it on again but it doenst help.

    I also tried once more to use the Toshiba recevory drive but you have the same problem.
    So now I'm back with my windows Xp is installed, but I can't get the WLAN to work.

    There isn't any conflics material.

    So now I need your help about how to do 2.

    tanks a lot.

    Kind regards

    Quickhat

    Hello

    On WLAN, there is actually no philosophy, and few things are important:
    The wireless network card must be installed properly (properly listed in the Device Manager) and
    It must also be enabled. Initially with switch WLAN (WLAN light is on) and then activate it by using the FN + F8 key combination.

    After making this key WLAN card should see all available wireless networks. To connect to one of them is another theme.
    To be honest I didn't understand exactly what is happening. If I understand you right your laptop can see WLAN but after reboot all available wireless networks is not visible. Am I right about that?

    Have you tried rebooting your WLAN router and restart analysis the WLAN area?

  • How to get the webcam to work?

    Hello

    As I don't have a book of instruction for this computer, can someone tell me how to get the webcam to work please?
    It is supposed to be something that appears on the side of the screen, but I left the sit of mouse here for centuries on all sides and nothing. Please help me.

    Kit_e

    Hello

    I agree with the user above. The user manual you can find on your computer because it s preinstalled.

    The webcam, you can use with programs like Skype communication. You can make a video call with friends and they see the webcam image. ;)

  • Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

    Hi all

    I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

    The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

    Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

    1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

    Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

    For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

  • My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?

    ESTABLISHING A NETWORK.

    My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?

    Hello

    1. don't you make changes on the computer before the show?
    2. what version of operating system you are using on the computer?
    3. which network you're talking about (home wireless network or group)?
    4. which steps have tried?


    If you use a group home on the computer, see the link for more information.
    Home Sweet homegroup
    http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

    You can also check out the link.
    Microsoft's strategy concerning lost or forgotten passwords
    http://support.Microsoft.com/kb/189126

     
    Provide us more information for you to help.
  • Windows Update, sent the 16/10/2009 stops HP Total Care of work, need to do system restore to get the programs to work.

    Do system restore to get the programs to work. programs worked fine until Windows updated 10/16/2009

    Never, EVER use system restore to 'Cancel' an update, Windows Service Pack, or upgrade of IE! If you feel that an update is the cause of a problem, first uninstall the update. If the problem persists, then you can try the system restore.

    Please indicate your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7 RTM) when you post in a forum or a newsgroup.

    Can you tell us what updates have been installed?

    Have you contacted HP Support about this? ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

  • MG6320 on Mac - can't get the installer to work

    I can't get the installer to work, fails to connect to the printer without wireless or wired. However, the Apple system preferences printer box can find the printer, allowed me to install the Apple driver, and I can print. I can also scan but only by using the Apple software. What should I do to get the additional applications provided with the printer to work, and why the all-in-one installer driver does not work?

    I am running Mac OS X 10.7.5, no firewall problems.

    Thank you!

    Hello.

    Please try to download the latest drivers for Mac OSX and software on our Web site.  These items can be downloaded from the following link:

    http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg6320#D...

    If additional information is required, please call us at 1-800-OKCANON.

  • Acer Aspire TimelineX 1830 68U118-t with a new hard drive. How can I get the bluetooth to work?

    I have an Acer Aspire TimelineX 1830 t-68U118.  The original hard drive died, so I replaced it with a new hard drive.  I loaded Windows 7 x 64 and loaded the chipset drivers and the network drivers.  The laptop is always my bluetooth equipment (even if I loaded the drivers Atheros).  Does anyone else have this problem?  How can I get the bluetooth to work?

    It would probably depend on the status of the warranty of the system.

    You must contact the service for options.

  • Can not get the camers to work

    original title: ca ot get the camers to work

    Cannot get the camera memory card to work

    Please explain exactly what you have already tried.

    The info might be worth a visit:

    Apparently, you have an external or internal USB media player?

    Insert the memory card into the correct location on the media player...
    If open windows... Close them.

    When the card is inserted... If you go to... Start / computer... is
    player card on one or several removable disks?

    Removable (e :)) drive
    Removable disk (e :))
    Removable drive (g)

    If_Yes_you can download photos from there. Left click
    the drive letter that corresponds to the SD card slot should
    display the directory of the card and you can copy and paste or
    Drag and drop the photos of your choice in a folder on your hard drive
    drive.

    Just a select group of photos do a right-click and choose... Copy...
    then navigate to the folder that you want, and then right-click the
    folder and choose Paste.

Maybe you are looking for