Impossible to get Trio A1000 MP3 player to work with Windows XP Pro

Similar Questions

• Impossible to get scanner HP scanjet 8250 to work with Windows 7

  Just bought a new laptop with Windows 7. I downloaded the driver for my scanner HP scanjet 8250 HP site, but it won't work. Any ideas anyone?

  writing in the new message: * e-mail address is removed from the privacy... *

  Just bought a new laptop with Windows 7. I downloaded the driver for my scanner HP scanjet 8250 HP site, but it won't work. Any ideas anyone?

  What version of Windows 7 do you have? It is 32-bit or 64-bit?

  Have you tried HP support? According to http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=214599&prodTypeId=15179&objectID=c01909569 here, there is limited support for the 8250 under Win7, which is their way of saying, it may or may not work.

  You can get the driver from here http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=214604&lang=en&cc=us&prodTypeId=15179&prodSeriesId=214599&taskId=135 . Simply choose your version of Win7.

  Many HP products are very picky with their installation procedures. I found that the instructions must be followed strictly in the order as listed, or there may be a problem. If the software has already been installed, it is sometimes best to uninstall it, and then try again. Unfortunately, since most of the documents, it seems the 8200 series was designed more for Mac and Windows.

  I wish you only good luck :-)

  SC Tom

• I can't get the charger 10 elements to work with Windows 8.1.  Is there a solution?

  I can't get the charger 10 elements to work with Windows 8.1.  Is there a solution?

  Never mind.  I thought about it all.  Thanks anyway.

• Impossible to get gateway multimedia audio controller driver for computer laptop 7508gx to install correctly. Other drivers that work with Windows Xp Pro for this material?

  The name of the driver of the gateway I get is Realtek Ac 97 Audio.
  Ive uninstalled the driver from Device Manager and added new material.
  Installation begins - the error saying:
  He can not pass the test windows logo to check if its compatible with windows XP

  More detailed, it says its recommended that he be not installed, if ignored its 10-error code saying that it will not start.

  Hello Osnapchuckie,

  Thank you for your message.  Is your aftermarket sound card or is it integrated with your Gateway computer?  Try to download and install the latest driver for your computer at the following sites.
  Bridge - click HERE to go to the gateway site and download/install the latest driver for your computer.
  RealTek - click HERE to download/install the AC 97 Codec from RealTek.
  If you are still not able to install these drivers, start in safe mode with networking and download/install the drivers from there.  Click HERE for Safe Mode instructions.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How to get PrintMaster Platinum 7.0 to work with Windows 7

  When you try to start the program installation, the message I get is "the version of this file is not compatible with the version of Windows you are using.  "Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher.  Is there something I can download from Microsoft to run this program?

  Version 7 is not compatible Windows 7.

  Version 2011 is... you can see here...

  http://www.PrintMaster.com/

• How can I get my Dell 720 printer to work with Windows 7 on a Dell Inspiron 6400, because I can't find the correct driver?

  My Dell Inspiron 6400 'Windows Vista' has been updated for "Windows 7" and the Dell 720 printer has stopped working.

  There are possible solutions here...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/cannot-get-Dell-720-printer-to-print-Windows-7/ab2cec8f-B267-4654-9f5f-9e9a48eac1c0

  Tricky

• How can I get HP 3050 multifunction Scanner to work with Windows 7?

  When I hit the scan button and then start scan the printer reads "not installed on the PC" the functions of the printer and fax work via the computer.  I went online and found three sets of drivers for Windows 7 64-bit

  PCL 6 x 64

  Post Script x 64

  PCL 5 x 64

  How do you know that one to download?  If I download the wrong one, will be I live to the top of the machine?  Help!

  The problem is not that you should download one of these 3 drivers Windows 7 already comes with the driver. The problem is that HP Universal drivers don't support scanning in the same way that you're used to. If you look at the "Software" section near the bottom of the HP driver download page , you will see a link that says "HP Color LaserJet and products LaserJet AiO/MFP - use the Scan and the software of Fax on Windows 7" with a link 'get software' on the right which will take you to the next page of the instructions: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02539136 .

• How can I get my Canoscan n670u scanner to work with Windows 8?

  Hello

  I've upgraded from Vista to Windows 8 and was happy to see Win8 instantly detected my trusty Canoscan n670u scanner and recognized as a connected device. It is, therefore, correctly identified, in Device Manager, I tested the scanner via Device Manager and diagnostics is well spent - it buzzed away, and the screen displays a message about successful test. Large.

  However, when I use the Wizard Windows Fax Scan & and click new scan, I get the message no detected scan.

  Whuh?

  I tried to acquire an image using Onenote. The scanner passed through calibration, apparently successfully, then as he was about to start scanning, came to a stop with an error message.

  Help! It's a good piece of hardware. What I don't really understand not is Win8 apparently automatically detected and installed the drivers for it, but will not let me scan anything. ???

  Any suggestions?

  AH HA!

  He fixed the this morning.

  I have downloaded the Vista version of the "Canoscan Toolbox" software on the Canon's Support site (http://www.canon.co.uk/Support/Consumer_Products/products/scanners/CanoScan_series/CanoScan_N670U.aspx?type=download&page=1), installed and run the Compatibility Wizard. Success!

  Scanner works fine, although the software seems to forget default each I close.

  I don't care.

  Thanks for your reply though - if someone else asks that you can point their to this!

• Can't get HP Desk jet 722C to work with Windows 7 64 bit

  I have an old HP Deskjet 722C I have used successfully for years, most recently with Vista Home Edition 32 (as well as with my XP laptop). I can't work with Windows 7 64 bit. There is no Win7/Vista drivers on the HP site for download. Bed in installs but does not print. The printer is found and installed, but nothing comes out when I try to print.

  Note that I have a parallel to USB converter on this printer, I have used / use with XP and Vista successfully.

  I see a lot of threads print say download the driver and run it in 32-bit mode to Vista. Since there is no driver to download I can't do. Convenience store is empty as well. Any other suggestions.

  Thank you

  Hello
  Welcome to the Microsoft answers site.
   
  HP C 722 Desk jet is not compatible with Windows 7 64 bit, then I suggest you contact the manufacturer.
   
  You can also check the compatibility, here is the link:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/b9ec9fc0-8121-48af-9d9d-8ee4c9f8c7fb

  Thank you and best regards,
  Azam - Microsoft Support

• try to get the HP SCANJET 5100C to WORK WITH WINDOWS 7. _ No. DRIVER UPDATE OF HEWLERD PACKARD

  I HAVE WINDOWS 7 AND AM LOOKING FOR A DRIVER, OR WORK AROUND FOR HP SCANJET 5100C SCANNER.

  NO DRIVER TO DATE OF H.P.

  The HP page says that XP drivers. Then you can try to use XP Mode, if you use Windows 7 teacher or company or buy a Windows 7 compatible scanner. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• WINDOWS MEDIA PLAYER 12 WORKS WITH WNDOWS XP?

  Media Player 12 works with windows xp?

  Media Player 12 works with windows xp?

  ===========================================================
  Unfortunately not... Windows Media Player 12 runs on Windows 7 and Windows 8...

  The following table shows which player is compatible with different versions of Windows.

  Download Windows Media Player

• Can't get my HP Laser JEt 1300 to work with windows 8.1

  Not sure if Im missing a step, but I can't get my Laser Jet 1300 to work with windows 8.1. Brand new computer and have spend 9 hours trying to install this.  Must be missing a step. I get an error message after clicking on the button print...

  You use a USB cable & not a parallel adapter?

  Did you use a Dot4 port questioned?

• Cannot get my headphones to work with windows media player. However, it works with Skype on the same system

  hepatitis tried looking for help microsoft collaboration BT can't get help online. I formatted my laptop 2 weeks ago and since then my headphones did not work with windows media player 11, although it plays on Skype on the same computer. any help?

  Hi famo10,

  (1) you get an error message?

  (2) is limited to Windows Media Player?

  (3) did you try Windows Media Player audio playback on the speakers?

  Method 1: Make sure that the Windows Media Player volume settings are properly adjusted and its volume is not muted. Now try to play different audio and video files and check if you can hear audio through headphones

  Method 2: Run the fixit available in the link below and check if that makes a difference

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/NO_SOUND/en-us?EntryPoint=lightbox

  Method 3: You can follow the steps mentioned in the link below

  How can I stop my music skip or break down when I play?

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Coffee latte MP3 player not recognized in Windows 7

  Original title: laptop with Windows 7 does not recognize my Café latte mp3 player - help!

  Worked very well he has about 6 weeks but tried to download music last night and it is not recognized. It works very well in my old laptop with Windows XP Pro. Any advice would be much appreciated! Thank you.

  Kevin

  Hello

  1 did you do changes on the computer before the show?

  2. have you checked with an different port?

  3. do you receive any error messages?

  4. What is the status of the device in Device Manager?

  To check:

  a. Click Start, type devmgmt.msc and press enter

  b. Locate the device and check if there is a mark next to him.

  Method 1: Run the troubleshooter

  See the site:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: System Restore

  See the site:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Method 3: update the driver

  See the site:

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

• I can't get Macromedia Authorware Web Player to work.

  Running Vista on a 64-bit Windows computer. I can't get Macromedia Authorware Web Player to work. When I download the program I've ever seen the "film playing below. I see only a bar saying "loading files" when I try to open a file in Authorware.

  If you are using IE7 or IE8 and Vista then try to add adobe.com to the trusted sites list. This will make the site open to disable protected mode. You can delete the site from the list of trusted sites once you're done, if you wish. It should not affect other content that you are running.

  Mike