Impossible to install Belkin F4U003 Universal Media smart card reader

Similar Questions

• Belkin F4U003 universal media player

  I thought that would be the answer so that I can continue to use my DL-500 Olympus that takes excellent pictures.  Dell technology gave me a link to Amazon and bought the product.  However, to date, I have not been able operate.  I contacted Belkin and the rep there was no success either.  I also contacted my people of software support with Dell and they failed also, advised me to get a better unit and thought maybe it was old.  I'm puzzled because it seems that a lot of people like this product.  Of course that they are using versions previous to windows, or else we did something wrong on our end.  I'm at my wits end on this.

  When you connect the player to your PC via USB...
  and insert your memory card into the appropriate slot... What is happening
  If you go to... Start button / computer...

  You see several removable disks?

  Example:

  Removable disk (d :))

  Removable (e :)) drive

  Removable disk (e :))

  If_Yes_they represent the slots on your media player and one of
  they should allow you to access the directory of the memory card.

• Want to 700-021eo. : 15-one smart card reader will not work or show after upgrade to Win10

  15-one smart card reader worked fine under WIN 8.1 but after that upgrade to Win10 it does not appear in the list of devices. I have tried to find drivers but don't know if it's a unit of HP or Realtek or whatever. Any suggestions?

  Kind regards

  Eyvind

  Hello @Eyka,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have a problem with the smart card reader and wanted to help you!  I see that this problem started after the upgrade of OS Windows 10.

  It seems that there are no Windows 10 drivers available for your product on the HP site.  It seems that Windows 10 drivers can be pushed through Windows Update.  Alternatively, you can try to check this site as well:

  HP products - where to find Windows 10 drivers and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• See 5.1.2 problem with smart cards - reader to not see Office.

  Hi all

  We try to roll an office linked Clone pool that is used by our service accounts and as such, they need to be able to use for banking smart cards. We have installed all the necessary software on the machine of model (GemSafe Gemalto) and also one of our Thin Clients (Wyse V10L or C10LE) connected to the model directly via RDP with the card reader chip attached to ensure that different drivers installed correctly and all is well, the virtual machine is able to see the smart card reader.

  The problem comes when spread us these machines up to the pool, the smart card reader is not detected at all. We tried to connect from the Client light view or via RDP directly to one of the linked Clone desktops and both meet the same problem, that is, the drive is not seen at all. If we plug/unplug the drive of the Wyse terminal we see it be detected in the log of the events on the Client itself.

  Can what tools or newspapers we use side view or VMware to solve this problem?

  To confirm, in the settings to connect to the server by smart card authentication is set to optional. In Global political USB access is set to allowed.

  If need more information please ask and I will be happy to provide it.

  Thanks in advance.

  Right, we got to the bottom of it... and I am kicking myself!

  There is a GPO side configuration of the active computer. Administrative Templates/Windows components/Remote Desktop Services / Remote Desktop Session Host / Device and resource Redirection - do not allow redirection of card device chip.

  GRRRR!

• 8460p: keep the smart card reader attached, even if the card is removed

  HP EliteBook 8460p

  Win 7 Pro 64-bit

  When a smart card is inserted, you are able to see your smart card reader in Device Manager. When you remove your card chip, the chip card reader disappears in Device Manager. Is it possible to always keep the smart card reader attached?

  According to the BIOS version (F.22) will there is a fix where you can set the power state of the smart card reader:

  '- Fixes an issue where the setup of BIOS (F10) does not display the power of smart card Options once the system is restarted. -Fixes an issue where rebooting the system (reboot) is slow after the modem is turned off in the configuration of the BIOS (F10). »

  But this isn't the case to find.

  Any suggestions?

  Concerning

  F27 BIOS and the new card reader is needed to solve this problem.

  old player = v1.20

  new player = v1.21

  /paasen

• Adding smart card reader driver

  Are there guidelines for adding smart card reader driver?

  There is a link at the bottom of http://www.blackberry.com/developers/docs/4.7.0api/net/rim/device/api/smartcard/package-summary.html to this resource page, but it seems to be dead.

  Is it possible to get it also?

  Thank you for this comment.  I'll get the fixed link.

  For now, you can see the JavaDocs included with the BlackBerry JDE 4.7.0 release, which includes this missing page.

• Problems of blackBerry Smartphones initialization of a 330 of SafeNet via the BlackBerry Smart Card Reader

  Hello

  I managed to use my PC BlackBerry smart card reader. Now, I am trying to initialize a smart card SafeNet 330 with SafeNet BSEC from the PC tool. But everything I do the initialization fails.

  Has anyone been initialized properly a card in this way by the BlackBerry smart card reader?

  I suspect a problem with the drive, why I'll try to find my Gemplus400 player and see if it works.

  Thank you

  Chris

  Using the player of Gemplus400 did the trick. Looks like the BlackBerry SCR reader stumbles on the configuration of the password during initialization of the as it does not define the label successfully.

• T510 smart card reader

  Hello everyone,

  I have a T510 4313-CTO with a contact smart card reader.

  I just wanted to know if the 60Y5031 of contactless smart card reader is a contactless and contact or contactless only reader.

  If only without contact, is it an option to have both in the machine?

  It is quite difficult to find info on this subject.

  Thank you

  Vince.

  Vince69 wrote:

  Hello everyone,

  I have a T510 4313-CTO with a contact smart card reader.

  I just wanted to know if the 60Y5031 of contactless smart card reader is a contactless and contact or contactless only reader.

  If only without contact, is it an option to have both in the machine?

  It is quite difficult to find info on this subject.

  Thank you

  Vince.

  You can drag a card inside, I still so he can recognize a card without contact without sliding into place.

• Tecra Z50 - A - 18 d - smart card reader does not work

  My Tecra O2Micro OZ776 chip card reader sees the cards.
  Device Manager reports "the device is working properly" and the latest version (2.1.4.222) of the drivers are installed.
  If a card is inserted or no, running "certutil.exe - scinfo" at a prompt gives:
  - - - - - -
  The Microsoft Smart Card Resource Manager is running.
  Current reader/card status:
  Readers: 1
  0: O2Micro CCID SC Reader 0
  -Player: O2Micro CCID SC Reader 0
  -Status: SCARD_STATE_EMPTY
  -Status: not card.
  -Map:

  ================================================== =====
  Card in the reader analysis: O2Micro CCID SC Reader 0

  --------------===========================--------------

  Fact.
  CertUtil:-SCInfo command completed successfully.
  - - - - - -
  I tried a variety of different card chipped and none of them even register as present in the drive.
  Does anyone have an idea what is happening here? Is there any sort of software adapted to this situation?

  Ah... never mind, the old trick of powercycle fixed the problem...

• 9-in-1 smart card reader fails to detect the SD card

  The9-1 Card Reader 5069-6732 in my Pavilion a604x has recently started not detect SD (non-SDHC) card when it is inserted into the slot. However, SD cards are detected in other PCs and their respective devices (cameras) and the USB port, which is part of the drive functions normally, just like the other USB ports.

  I would appreciate any suggestions you may have about this problem more far.

  The troubleshooting steps taken so far are:

  • confirmed the Device Manager detects the drive, the most up-to-date driver is installed and no errors have been found
  • uninstalled the SD Reader USB Device in device drives Manager, then rebooted and it helped to reinstall
  • confirmed Card Services smart Windows runs in msconfig and is set to Automatic Startup Type
  • restored the system to a date 3 months ago (well before the problem started)
  • Reload the default BIOS
  • Removed the drive and cleaned and inspected the pins, double checked cable connections

  I'm unable to test other types of smart cards that are not available to me at the moment.

  Right now I'm leaning to buying another drive asuming the former one was defective, but wanted to make sure I'm not overlooking what that it be before I take this measure.

  Thanks for your help

  Solved!  Replaced the card reader... now works as expected

• smart card reader has stopped responding on my hp Pavilion

  Help, please

  Hi Albert,

  Download and install the hotfix from the link below and see if it helps.

  A computer that has compatible smart card logon stops responding after that you remove and then re-insert a smart card in Windows 7, Windows Vista, Windows Server 2008 or Windows Server 2008 R2

  Good day!

  Just reply to us if you have any questions.

• Smart card reader driver is sought on Windows update after inserting the smart card

  We are in the process of deploying PKI project in our environment. Client computers have Windows 7 Enterprise 64-bit SP1. We use McAfee Endpoint Encryption 5.2.12 on all clients. Our environment has a mix of Dell (Latitude E6400, E4300, E4310, E6410, E6420) and HP (EliteBook 8460p, EliteBook 2560p) laptops. There's no problem with Dell laptops at all.

  With HP machines, however there are two problems.

  1. with the model 8460p, after installing the Alcor card reader driver, when I insert the smart card into the reader he begins to search for the drivers on windows update. In three minutes, it updates the drivers and works very well. My concern is when I install the card reader drivers explicitly why go to Windows update. HP 2560p also has the same card reader, but this problem is not on this model. I disabled the driver smart card research in strategy group as well. This behaviour is sparkle roll.

  2. when I enable smart card authentication on the McAfee console for any HP laptop and try to use my smart card on McAfee Endpoint encryption pre boot screen, machine freezes. Same configuration of McAfee encryption works fine on Dell laptops.

  Help, please.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on Microsoft TechNet. Please post your question in the TechNet forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Hope the above information is helpful.

• Portege Z30 - smart card reader does not work

  Hi, I just got my new Portege Z30 a few days ago.
  I try to use the card reader chip for my Spanish ID (DNIe) and seems to not work.
  When I insert the card as stated in the users manual, nothing happens.
  I have to player of SC "actuvate" somehow?

  (DNIe needs a compatible with ISO7816 SC reader, as one installed in my laptop seems to be)

  Usually you should not activate anything. Check the status of card reader in Device Manager please. There is everything OK?

  Make sure that you use a compatible card and it is inserted correctly.

• Authentication Manager + GemPlus smart card reader

  Hi all!

  I was reading about View Manager Auth integration with RSA SecurID. I did some tests and worked like a charm.

  But what I could use solution gemplus smart card to authenticate users?

  Thank you.

  Best,

  Eduardo.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '.

  Hi Eduardo,

  VMware View supports RSA SecurID auth method. 2 factor.

  It also supports the opening of session of smart card on the desktop with SSO from the client to the office.

  There is an information guide to smart card on the vmware Web site explaining that: http://www.google.de/url?sa=t&source=web&ct=res&cd=1&ved=0CBYQFjAA&url=http%3A%2F%2Fwww.vmware.com%2Ffiles%2Fpdf%2Fview_cert_authentication.pdf&rct=j&q=SmartcardVMwareView + guide & ei = Vx75S6XuGMuLOOeNxZUM & usg = AFQjCNGqupwPpQBH34PP2mFe3zv1yIGIaw & sig2 = NHQsN1XjYLXgaXIx_5xqoA

  Kind regards

  Christoph

  Don't forget to assign points if this answer was helpful for you.

  Blog:

  http://Communities.VMware.com/blogs/Dommermuth | http://www.thatsmyview.NET/