Impossible to install LabView 2012 SP1 (64-bit)

Similar Questions

• How do we install support for labview 2012 sp1 64-bit

  Hello

  I downloaded and installed Labview 2012 sp1 64-bit and

  the installation requires a drive support.

  Where can I download a dvd for 64-bit Labview support?

  Thank you

  desiko

  You must install the drivers again so that it will install support for the 64-bit version of LabVIEW.

• Installation of the Module LabVIEW 2012 SP1 FPGA with LabVIEW 2012 SP1 64 bit on Windows 7 X 64 machine.

  I installed 32-bit and 64-bit LabVIEW 2012 SP1 on Windows 7 X 64 computer. After that, I installed SP1 FPGA Module. While module FPGA completely installed in the 32-bit version and could develop projects fpga, FPGA interface has not installed the 64-bit version. Anyone had this before question?

  The document 5WMF8NQ2 knowledge base says it's doable.

  I have tried to repair the installed module, remove and then reinstall the module. Nothing helped me to get the FPGA interface on a 64-bit host VI. Any suggestions? Addition of the individual screws through the range of editing functions like a tedious process and the palette is not completely functional.

  I solved the problem. Had to repair each driver separately for LabVIEW 2012 SP1 64 bit installed on the default drive. You may need to copy paste files to the folder that it installed in function.

• Impossible to install labview 2012

  I try to install labview 2012 on my 64 bit Windows 7 system, but fails;

  Here are the symptoms:

  (1) I click setup.exe directly and it shows that:

  

  (2) if I run it with the administrator, it appears that:

  

  (3) I checked that I can execute another exe file...

  Thank you

  Hi Bestchun,

  It could be a damaged Setup file. Try to re - please download the installer of ni.com/downloads.

  I will follow this post, answer so if this does not work for you.

  N

• Windows 7 takes 15 min to start after installing Labview 2012

  Hello

  I need help on this, is this a bug?

  The problem is that on my laptop after installing Labview 2012, it takes about 15 minutes to start, this happens every time a restart or start my laptop.

  At first I thought something with my laptop, but then my colleague also installed Labview 2012 on his laptop and has exactly the same problem, the difference is that his new laptop and is running windows 7 Professional 64-bit, mine is older and is currently running windows 7 32-bit professional.

  I tried to disable the services NOR, but has not solved the problem, but when I disable all windows services that start at startup, the startup is fast.

  Also note that I had Labview 2011 installed before and I didn't have this problem before.

  Tried also to find something in the registry, but nothing.

  Any who have this problem, or a solution to this?

  Thanks in advance

  This problem seems to be resolved, but then he come back again a few days later

  I did many tests in my laptop and found it to be in the "Service of Network Store Interface" service (INS). Disabling this service, you have your problem solved, but there is another problem, you lose the network.
  This happens because the "DHCP Client" service depends on the national statistical institutes.

  Also, this issue seems to occur only when the PC is in a domain and I'm in a windows server (Windows SBS2008) domain.

  Then I found that if you set manual this services which depend on national institutes of statistics (DHCP Client, DNS Client, IP Helper, network connections, local awareness network) and also put INS manual
  You must also disable the "Workstation" service that also depends on national institutes of statistics (why turn off? Because there are 3 services that depend on the workstation service, they will require to start, and then it will force NSIS to start, then long boot, if you really need of the dependent services on workstation, do the same as for them)
  Not also need uncheck this services in msconfig window if they are checked, and then the PC will boot normally without a network.

  When you start, you should go to services and start the DHCP Client for the network (and the other if you really need)
  This will force also NSIS to start and other services that depend on the national statistical institutes.
  The first time the PC restarts, you may need to reset these services to manual in the services window, I had to do, and then in sebsequent boots, they have been already set to manual
  If you leave right on the dependent services in automatic or automatic (delayed start) it will force NSIS to run and start time will go to + - 15 min

  Because you must manually start "DHCP Client" for the network, here's a solution to do it automatically after have connected you:
  1 - Go to control panel, and then open administrative tools
  Task 2-open Scheduller
  3. on the right click "Creat fundamental task.
  4. in the first window give a name ("DHCP" for example) and press next
  5 - Click on "When I Logon" and press next
  6 - click on "Start a program", and then press next
  7. in the "program/script" insert: net
  8. in the "Arguments" insert: start "DHCP Client".
  9 - Press 'Finish' and you're done

• Could not detect USB RIO 7856R in labview 2012 SP1

  Hi @all,

  Why I couldn't detect 7856R USB RIO in labview 2012 SP1? I already install drivers include DVD, see (USB-7856R) in max or, but can not add it to the project manager.

  Data sheet says its compatible (between LV2012 and 7856R)!

  Hey damienski86,

  According to the product page (tab "Panorama"):

  Required software 
  This product requires the LabVIEW FPGA Module 2013 or later Version and NEITHER-RIO Version 13.0 or later driver software.

  I think that you will have to go up to the latest software (2013 SP1 came out today) in order to be able to use your new hardware. Where do you see that the device is compatible with 12.0 specifications?

• I can't MJD (date and time) in LabVIEW 2012 SP1?

  I need some time my data of stamps before sending it to the file.  I did this with the standard calendar date and time but MJD is that we prefer to use.  How can I get a timestamp MJD in LabVIEW 2012 SP1?

  Check the JD MJD conversion formula
  http://www.IERS.org/nn_10828/IERS/en/service/glossary/MJD.html

  The modified Julian day (MJD) is defined as MJD = JD - 2400000.5, where JD is the Julian Day

• Impossible to install SP3 for XP 64 bit don't keep saying updatebr.inf is invalid inf file

  Impossible to install SP3 for XP 64 bit don't keep saying updatebr.inf is invalid inf file

  There is no SP3 for Windows XP 64-bit.

• Impossible to install cp1525 reached hp 64 bit of vista windows 99% say that it took too long fatal error try again

  Impossible to install cp1525 reached hp 64 bit of vista windows 99% say that it took too long fatal error try again

  Hi asarabia

  Fatal error documents

  Restore the original factory configuration

• Impossible to install labview

  I buy the software of our University webstor and download all the files of it.

  When I try to install the labview 2012 in my 64-bit Windows 7 systems:

  (1) when I click on autonrun.exe and it shows not install, but I click intall, there is no answer;

  (2) I click directly on the setup.exe, it shows that:

  

  But in our laboratory, we install the same file on windows 7...

  (2) if I run the installer as administrator, it says:

  

  (3) I check I can execute another exe file

  Did you properly extracted all the files in the downloaded installer zip file?

• LabVIEW 2012 SP1, failed to get a correct mechanical action on buttons Boolean

  I try to use the Boolean buttons and events to programmatically change the properties of a graph.  I basically want to click a button on the FP and have the graphic change the property you want.  All changes of property is very nice, but I'm really struggling with the mechanical action of the buttons.

  I'll preface this by apologizing that I can't post my code, as computers with installed LV are isolated. My code is basically OK buttons, a while loop and a structure of the event with an event to change value of each button.

  I want the user to click on the button. After the click and release, I want the button to be in the same State he started, and I want the value change event to trigger only once.  Sounds to me like I want the released mechanical locking when action.  The problem is that it does not work.  I can't create buttons that behave like that.  None of the 6 mechanical actions exhibit the desired behavior.

  To make things worse, I have two buttons OK that both the latch value by releasing.  The two buttons are True before the click. A button behaves as expected (the button is true after the click and release) and the other button switch back.  I tried to copy the work correctly the button, but still the copy button does not work the same as the original.  The two buttons trigger a unique value change event, in spite of behave differently.

  To answer the question "where do I get the button work of?  Awhile back, I made a simple button test vi which have proved all 6 of the mechanical actions and kept track of how many times they shot a changing value of a click event.  My buttons worked when I did this vi... Finally, I remember having trouble with that at the time too.  The results of this hurt me by using the switch until the buttons released with mouse events during a long time, until I got the button test VI works correctly and learned how to really work the buttons. But the buttons are now funny.  I tried to copy the latch work by releasing the button in my current program, but for some reason only two buttons work copied as expected, despite them being copies of the same key.

  Is there a bug in LV2012 SP1 (64-bit) where mechanical actions don't always work?  Will I be stupid?  I'm sorry I can't post the code.  I have this problem on Windows 7 and Linux.

  A little more information, because I wanted to make sure I tried eveyrthing before posting.  I tried to make a new button test VI.  That still works, but I can't see the buttons in the new button test vi behave the same as I did.  In the new lock when you press the same features when you press on and latch when relased acts as switch when released.  Switch release lock until this that released and behave slightly differently.  They both change value, but on actually switches the light two events twice (still there and back), where just LuR moves to state once but still fires two value of change in events.  I checked to make sure that the mechanical actions are set correctly at least a dozen times.

  Quite confused here.  My old test vi button works as I expect, and the lock when released button as I want, but I can't for the life of me reproduce it.

  You have the terminal button located in the event of changing the value associated with this button?

  

• Satellite L300 - clean install Win 7 SP1 64 bit

  I just did a clean install of Windows 7 64-bit, replacing the normal 32-bit Vista that comes with the laptop.

  The facility has been good, but I have a few questions about the following:

  I adjusted the automatic run settings to ask every time for all selections. The problem is that when the game DVD in WMP or VLC disk reads but is noisy. It is very good for the s CD without excessive noise. The acoustic silencer on the download site is for 32-bit, but can be used in this laptop. In the original Vista there is no noise at all, so I wonder if there is other parameters that can sort this point, otherwise I'll have to keep changing things manually with the acoustic silencer.

  I noticed a very low noise coming from laptop (like a lighter version of a business when you're boarding Jet it). I ran a video memory Stress Test CE and he showed a few errors. If I reduce the brightness of the screen there is less noise so I wonder if it's something to do with the Panel of inverter of screen I'm sure that's not the HARD drive or the cooling fan, but it could be something on the motherboard.

  On the backup plan Acronis will slow down my system or are Win 7 OK backup options?

  Thanks a lot for all the possible solutions to these problems.

  A long time ago I've installed Win7 32 bit on friends Satellite L300. It worked perfectly. Much better than original Vista.
  > I still don't know what is the best test for the screen.
  I put t understand what kind of test do you mean. I hope that you have installed the right display driver and LCD works perfectly with a native resolution.

  Win7 recovery with Acronis image creation is, generally, the right decision. With this disc, you can install Win7 again and again very rapidly and you should not install every single driver separately.

  If you want to keep this laptop any longer I think it is worth to buy it. One last thing: you will buy it once and you can use it in the future too if you decide to buy the new laptop or PC.

• Impossible to install WIN 7 SP1 on NB250

  When I run Windows Update on the laptop NB250 installing Windows 7 SP1 is recommended. Even if the computer is not able to install this update and shows error code 800F0829.

  In this site, I learned that NB250 is compatible with SP1. That is why I would ask a solution for this problem. Thanks in advance for your collaboration.

  After the error code the computer show something like "connect the computer to an electrical outlet and try again" if so try the update with your computer connected to a power supply.

  If this does not work there is a troubleshooting guide for updates: -.
  Open the Windows Update troubleshooting tool by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under system and security, click Fix problems with Windows Update.

• Impossible to install Windows Server 2008 64-bit edition

  I'm under ESXi 3.5 on an Intel Core 2 Quad CPU Q8200. When I try and install Windows Server 2008 64-bit edition, I get the error that the processor is not compatible. Could someone please help. Thanks in advance.

  I withdraw that.  Looks like the Q8200 don't have VT - x.  As such, it cannot run 64-bit guests.  See KB 1901.

• Error code: 800F0A12 (impossible to install Win 7 SP1)

  Hello;

  I currently have problems installing with SP1 for Windows 7 Ultimate 64-bit.

  Code 800F0A12

  Suggestions to solve this problem would be appreciated.

  Model: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz

  Total memory: 6GB DDR2 DIMM

  NVIDIA GeForce 8800 GT

  Operating system:

  Windows system: Microsoft Windows 7 Ultimate 6.01.7600
  Compliance platform: x 64

  Product ID of Windows 7: 00426-292-5120794-85762

  Sincere friendships;

  Jason

  additional details error:0X800f0a12

  If you're used to other partitioner, as me, I used linux to get rid of this windows 100MByte partition and installed linux then on another HARD drive, I needed to pull the linux HARD drive cables, then using only the HDD Win7 I can install Win7 SP1. I hope that this is a solution to your problem.

  If you still cannot install it or the linux is on the same drive, I think that there is no solution. Only to repartition the whole HARD drive and use the partitioner to Win7.

  I found this on: http://windows.microsoft.com/en-US/windows7/windows-7-windows-server-2008-r2-service-pack-1-sp1-installation-error-0x800F0A12