Impossible to install NI-VISA Driver under Windows 7
Hi all
Software isn't exactly my strength, so I apologize if this question is badly phrased or trivial.
I am trying to use NI-VISA 4.6 to create a driver for a USB mouse. My ultimate goal is to read the RAW files positional USB rather than read the position of the mouse on the screen. This way, I will be able to use the mouse to measure distance without having to worry about the cursor passes at the edge of the screen. My VI will work pretty much along the lines of this one, which was kindly donated by Intaris on this thread.
I'm running in the driver installation problems, that I created with most of the time described NI-VISA here. I created the driver .inf and copied in C:\Windows\inf. Since I am on Windows 7, I copied the Vista driver rather than the driver for earlier versions of windows (another user on the tutorial I linked above says it worked). I chose my .inf file and clicked "install" from the menu drop-down of the right button of the mouse. I received a message the first error while I tried saying that the driver was not checked and proceed in any case. No .pnf file was created in the inf folder (as I believe she should have). I tried updating the driver for this particular mouse for the new driver, I created in the Device Manager. Windows has resisted, saying that it had already installed the best driver to work.
So now I know exactly what to do. I think that other people have figured out how to make it work, but I am helpless as to what I can do differently. Is - anyone out there know what could be wrong? Is there must be a .pnf file in order to get the driver to work?
Thank you
Thanks for the help everyone. I think I finally found the solution .
I did a lot of trial and error with Windows and finally I got a driver that I created in NI VISA is accepted. Since it has been hacked together, I have a problem determining the stages that I have to work. I'm not sure that this list of steps is quite necessary or complete, but in the interest of helping people with a similar problem, I'll try to explain what I did to get the mouse to be read.
The key was probably uninstall the mouse that I wanted to use for the project. I did this in Device Manager and then found the USB root hub that was running my camera. I have updated the driver through here rather than through the section 'mouse '. Information on the procedure to be followed are explained in detail in these two knowledge base articles:
http://digital.NI.com/public.nsf/allkb/28C5E7D2E9FBB4CC86257536005A3692
http://digital.NI.com/public.nsf/allkb/3C335141B64C038886257141000036F2?OpenDocument
I created the NI-VISA drivers and saved in the default folder (under my documents / National Instruments/NI-VISA) and they installed from there. I don't know if the installation step was necessary. Then I updated the drivers as explained in the second article knowledge base related to listed.
I think that the crucial stage is uninstalling the mouse in Device Manager. This could be the "firmware" mentioned in the article by following the link, but the formulation knowledge base is so ambiguous that I thought I have to uninstall the drivers.
http://digital.NI.com/public.nsf/allkb/273BB58D3B52CE6886256F3B00714D03
Thanks again for the help
-David
Tags: NI Software
Similar Questions
-
How to remove the printer driver under windows Vista software
How to remove the printer driver under windows Vista
Hello
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems--------------
If you have an error spooler or service use these methods to make them disappear including having to re - install
the same printer if you intend to remove it.Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
System crash when I install the bluetooth driver in windows 8.1
HP Pavilion 15-e034tx
When I install bluetooth driver in system failure windows 8.1 with this error "unhandled Thread Exception system.
Bluetooth hardware ID: PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
Sir where is Bluetooth for Windows 8.1 driver?
can someone help me please?
Hello everyone I found the solution to this problem of Bluetooth. First of all, I want to share the essue of Blutooth hand in windows 8.1.
History is actually a bit interesting: Microsoft has fixed a bug in the rollup of November which exposed a bug previously hidden in Bluetooth drivers for Ralink/Mediatek, resulting in all the world with a fully-updated Windows 8.1 and Ralink bluetooth (very common in low price/low-end systems) to BSoD unless the bumps users to a system restore point before updates of November. So yes, there are sometimes dangers for fixing bugs.
Basic requirements:
1. all drivers for HP laptop, BIOS and windows 8.1 implemented to date with the latest updates.
File Requirements:
1 8.1 Windows file update kb2917488 - x 64 (download link)
http://www.4shared.com/RAR/CP-Ov9Hv/blutooth_update_fix.html
2. Ralink software Bluetooth driver (windows 8 or 8.1 Windows)
Basic steps:
First check windows update, download and install any updates. Also download and install the latest driver for windows 8.1
Download file update 8.1 for Windows kb2917488 - x 64 in 4shared link. (File name: Bluetooth fix)
kb2917488 - x 64 Windows 8.1 updated in.cab(cabinet file) If you need to know how to install the .cab file installation.
The .cab file installation steps
Open the administrator command prompt and run the following command to install and integrate the Archives of Cabinet:
Pkgmgr/ip/m:
.cab / quiet Or,
start/wait pkgmgr/ip/m:
.cab / quiet Replace
with the path (location) for the file .cab and with the file name of the cab without parentheses. If the CAB file is in the current directory (same directory where the command is executed, the path can be ignored. Example: pkgmgr /ip /m:C:\Users\User update fix\windows8.1-kb2917488-x64_43f3b89601d407a00cbf87297ab1ddb0ba1c4619.cab/quiet
(If you do not understand the method of installing the .cab file search for it on google)
This command silently install the Windows kb2917488 8.1 update file - x 64 in your system... complete installing the automatic system successfully reboots (wait automatic reboot)
Now you can install your old windows 8 Ralink Driver Bluetooth software or update the latest driver with HP Support Assistant in windows 8.1.
(Note: install all the drivers to run as Administration) (Sorry for the bad English)
-
Impossible to install Photoshop 3.0 on Windows 8
Impossible to install Photoshop 3.0 on Windows 8
If you really mean ps 3, it is not supported.
If you mean ps cs3, you should be able to install using compatibility mode.
-
Satellite P750: Impossible to install the Bluetooth Stack on Windows 7 (x 64) driver
Hello.
I own a * Satellite P750-02 t * (part No. * PSAY3A - T 02 001 *).
In the order I did:
(1) I formatted the HARD drive and reinstalled the operating system of * Windows 7 x 64 Ultimate SP1 *.
Then I downloaded * ONLY the BIOS and drivers * of [his downloads page | http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25]:
(2) I've updated the BIOS for * v1.90* (the laptop came with v1.80)
(3) I have installed all drivers:
-LAN and WiFi
-Chipset Intel latest (available)
-all video drivers (NVIDIA Graphics, Intel HD Graphics and Intel HDMI)
-Card reader
-Realtek HD Audio (later)
-Synaptics Touchpad
-USB3.0
-IR
TV tuner
However, I * cannot install Bluetooth driver (v8.00.06 (T) *)...When I run the installation program of the [aforementioned page | http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it detects partially *'Bluetooth USB Controller-10 TOSHIBA'* (USB\VID_0930 & PID_0215 & REV_001)
and then the installation freezes simply displaying + "install the Bluetooth driver. Please wait +.' and stay like that forever...I also tried to download a driver [another location | http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for laptops TOSHIBA - v8.00.02 (T):
and followed installation instructions displayed under "Details".
but he had the same result: the installer simply crashes...Install fix (* KB978258 *) recommended it did not work either - the message "+ update is not applicable to your computer +" appears.
And I understand why - this fix is [already included: http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] in Service Pack 1 for MS Windows 7.I spent hours searching the Internet for a solution. Although there are some similar cases, none of the recommendations actually worked. I tried to install:
-WiFi driver before installing the Bluetooth (someone suggested that these two are parts of the same card);
-Repeat Mode Setup without failure;
-* Toshiba value added package * hoping that somehow these tools will kick in.
Nothing has worked...It is interesting to note that when, in the interests of experimentation, I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks | http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything runs smoothly!
* Using connection Bluetooth on this laptop is absolutely crucial for TI
I hope that I won't get back this beautiful laptop as I know that TOSHIBA is one of the best manufacturers and I am sure, that there is a solution to this problem.Thank you very much.
Evgeny.Post edited by: cardiovascular disease
specified on the use of another generic Bluetooth adapter with non-TOSHIBA driverYou can use the key combination FN + F8 to toggle WLAN?
You can also see BT symbol there?Before you begin installation battery BT try to activate BT module by using the FN + F8 key combination.
Generally avoid some problem with it. Toshiba BT stack is tested on al models proposed by Toshiba and fireplace installation BT has, in my view, nothing to see what version of Win7 you use.
Do not return this laptop. It has to do is just install drivers, tools and utilities. Please note: BT stack is included in the recovery image so BT must work.
Also, I must say that OS installation of drivers, tools and utilities on Toshiba laptop must / should be installed in the correct order. Many tools can work only and must be installed on basic stuff that can be installed with other specific tools of Toshiba.
Please send a few comments if this FN + F8 will work.
-
Impossible to install the audio driver Windows XP Home for my Satellite A110
Hello!
I formatted my hard drive and now I have reinstalled Windows XP on my TOSHIBA SATELLITE A110-160.
I don't have the recovery CD, but I have downloaded all the drivers from toshiba.com.
The thing is, when I try to install the audio driver Realtek HD, I get a message that I have loaded on my system bus driver so
to install the Realtek HD audio driver!So I don't know what to do, and I can't play the audio in my laptop!
Please, help me!
Before you start to install a driver available, please download and review the Instructions for installations.
You'll find order exact facilities. Please follow this wnd control facilities that everything will be OK.
Have you installed the chipset utility first? -
Downgraded Acer Aspire V3 575 G for windows 7, but impossible to install the wifi driver
Hi, I got a new laptop yesterday, the model is Acer Aspire V3 575 G 73ZZ. I didn't like the 10 preinstalled with windows so I installed a new copy of windows 7 on it. However, once the installation is complete, none of my drivers work. I went looking for the drivers for my model, but they were all for windows 10 and were not compatible with my laptop. I tried to install the drivers wifi during the night, but none of them work on my laptop.
Does anyone know what wifi Drivers to install so it can run on windows 7?
I found the solution to my problem! I did a search on acer and discovered that my device is using Win Driver Atheros Wireless LAN (NFA344) 10 64-bit, so I did a search on Google to find the version of Win 7 64 bit for the driver and came across this page: http://support.lenovo.com/sg/en/downloads/ds105865
Even if the driver is Lenovo, but I ran on my Acer Aspire V3 575 G and it worked perfectly. I am able to connect to the wifi now!
-
Whenever I want to copy, paste, delete, move, install something from D a window pops up saying: you need permission frpme S-1-5-21-220523388-1972579041-682003330-1003 and copy past or what ever I am doing...
someone help me please :DOriginal title: S-1-5-21-220523388-1972579041-682003330-1003You must enter the property of your records - see here:http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/ -
Satellite A100-455: Impossible to install the LAN driver
Hello
I have recently re installed my dual boot Linux/Windows. Linux works fine, but under windows, it refuses to install the LAN Driver (Ethernet controller).
I installed before the chipset and it still does not work. All the drivers have been downloaded from the Web from Toshiba website.
Any idea on what could be the problem?
Thank you
Hello
I know that this question;
I think you just tried to install a LAN driver is not compatible.The A100-455 seems to belong to the PSAA9E series.
If you choose this series then you will find two different Lan drivers;
Intel v9.2.24 is a driver Pro1000 and Intel v8.0.43.0 is a driver of Pro100.Check both!
-
Impossible to install NVIDIA Graphics driver (HP 15 - R033tx)
Hello.
I installed a new copy of Windows 7 on my new HP 15-R033tx.
I downloaded and installed all the drivers from the HP website.
But, when I try to install the NVIDIA driver, it says "' install intel ®drivers first" "
Kindly help me in this problem.
Thank you.
Hello:
Here's what you need to do for the graphics...
1. install the Intel chipset installation utility first and then restart.
2. install the Intel HD graphics driver and restart.
3. install the Nvidia graphics driver and restart.
-
Satellite Pro L850-1DT impossible to install Win 7 driver wireless
Please, I beg you.
On costs to install Windows 7 64 bit downloaded all drivers wireless I can find on the site of tosh.
No work.Find in this page http://www.toshiba.co.uk/discontinued-products/satellite-pro-l850-1dt/ ended
Says spec card Atheros.Try reinstalling the driver atheros, it gets a little then disappears and nothing happens.
Tried the driver atheros here too, but moved, but no functionality.At one point, I tried the function and F12 key on and outside, that seemed to allow some stuff of bluetooth and wireless.
I have "Network controller" and "Unknown device" in Device Manager with yellow exclamation points.Heeeeellp please.
You're right, it seems that the laptop Satellite L850-1DT was equipped with the Atheros WLan card and the Atheros WLan driver should be right.
This Atheros card also supports Bluetooth function and what an additional driver must be installed for both WLan + BT working.
First you must install Atheros WLan driver suite by packet filter for driver Atheros BT and battery Toshiba BT.Of course, all other tools like value added Package for Windows 64-bit must be installed too!
I hope this helps.
By the way: driver can be found on the page of the Toshiba UE driver
http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU
Here you choose the Satellite Pro L850 PSKDHE -
Impossible to install the graphics driver reinstallation of my Satellite L850-1VQ
Hello
I have a Satelite L850-1VQ with AMD Radeon HD graphic M card 7670
Due to a virus, I had to format my hard disk, recovery partition inclued. I installed windows back 8.1 from a generic disk of Microsoft. I have no problem to install windows or activate, but I can't just install a graphics driver. The one gived on Toshiba Support for Satelite L850-1VQ
(http://www.toshiba.fr/innovation/dow...verLanguage=42)
make my computer has a blue screen, then restard after every boot, there is frozen on my screen before shutdown the computer or unusable. I tried the latest driver by AMD ditribute but it's the same thing. Every time I tried another driver, I reinstall all windows 8.1 after formatting of the partition to be sure that a driver so make mistake with another.
I got totally Formate and reinstal 6 times my computer yesterday, if someone can help me please?
Thank you
Have you installed Intel stuff at the beginning?
Driver Chipset - 9.3.0.1021 and Intel Management Engine Interface 8.1.0.1263? -
Satellite L10-209 - how to install the display driver for Windows 7?
I formatted my * Satellite L10-209 * and * Windows 7 *. All the drivers installed fine but the * video card *: xD
How to install the display driver (graphics card)?
Tools & Utilities CD does not work with Win7,Hello
I m wondering that you have installed Windows 7 on this good old classic. In my opinion Windows XP would be the best choice, but ok, you can do what you want ;)
Anyway, AFAIK your laptop is equipped with an Intel graphics card then I recommend to download the driver form Intel directly because the Web from Toshiba site displays only the Windows XP display drivers.
http://www.Intel.comCheck this box!
-
HP ENVY h8-1400z: impossible to install a new copy of Windows on HP ENVY h8-1400z
I'm unable to install a new copy of Windows 7 on a HP Envy h8-1400z. I had to replace the hard drive and there is no disk recovery performed by the owner.
I was finally able to set the BIOS to boot from the DVD, but now I get a message that the drivers must be installed.
What drivers might need to install a fresh copy of the operating system?
I downloaded Windows 10 on USB. Clean installation since the media worked.
-
Impossible to install the nVidia Driver
When you install a nVidia Driver I get: "ensure that the module exists...". " . I tried all the drivers on XP, Vista, 7 32 and 64 bit and still train and during the installation of the drivers via Device Manager all drivers install correctly and I encounter this kind of thing: http://www.youtube.com/watch?v=fMtaxpLQvHo
I installed all the drivers, old, new and always this question, sometimes even PC freezes and then goes to the blue screen. When looking for a solution to code solutions will not work. I need help.nVidia GTS 250 3.00Ghz/3.00Ghz E8400 Intel Core 2 DUO, HDD (Samsung Sata 3.5) 1 TB, 4 GB Transcend RAMTested no problem RAM.Hello ILO - clearly,.
I was looking on this thread and noticed something very important - it only happens on the nVidia drivers.
Is this correct? If this is the case, then we might want to hire nVidia on this issue.
In the meantime, we can make an attempt to perform a clean boot before you uninstall and then reinstall these drivers.
For Windows XP:
http://support.Microsoft.com/kb/310353
http://support.Microsoft.com/kb/316434
For Windows 7:
Maybe you are looking for
-
How can I cancel my account and create a new one
How can I cancel my account and create a new one
-
Question about BIOS beep codes
Difficulty locating the BIOS beep codes... can anyone help? I get 3-3-1...
-
updated verizon mifi now unable to connect a new
Have an all in one printer 4622. It was connected to a VZW mifi and worked without problem. I had to update because he died and now I can't figure out how to set up a new. Help, please.
-
Desktop - cannot display the entire screen, scroll bar
Cannot use the scroll up/down or see the entire screen when reading the mail/documents because that office titles show on the left. What can I do for securities of funds do not appear when I read the emails? They take a part of my screen.
-
Software update in the Apple Menu
Update of OS X Mavericks a week ago. My printer Photosmart C4750 print however, the following message has been displayed - "you must install the software to use this printer. To install the software, choose software update from the Apple menu. If