Impossible to install Norton Ghost 15 under Win 7
I get 'Error 2738 could not access VBScript Runtime for custom action' when I try to install Norton Ghost 15. Installation of program stops to notice of the error and then shock the partial installation. Someone at - it ideas on that?
Hi Bill18163,
Thank you for visiting Microsoft Answers!
This error message indicates that the VBScript engine is not currently registered on the machine where the installation/uninstallation.
I suggest saving the VBScript engine and then try again to install Norton Ghost 15. Follow these steps:
1. run the command as a prompt administrator.
2. Start Menu-> all programs-> Accessories.
3. right click on command prompt and select run as administrator.
If you use the 32-bit version of Windows:
Type cd %windir%\system32 in the command prompt and press ENTER.
If you are using the 64 bit version of Windows:
Type cd %windir%\syswow64 in the command prompt and press ENTER.
4. type regsvr32 vbscript.dll in the command prompt and press ENTER.
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Impossible to install CS 5.5 under Win
How can I install CS 5.5 point 8.1 of Windows? The installation program is to give the following error message: WARNING: conditions are not met for DW66:OS... CS 5.5 is not compatible with Win 8?
Use the compatibility mode for the installation.
-
You can install Norton Ghost 15 backup with Norton 360, or it is not recommended?
I installed Norton 360 on my Windows XP computer and I would like to know if I install Norton Ghost 15 if it would conflict with Norton 360 or both would be not compatible?
I think they are compatible. 360's anti-virus; Ghost is the backup. If you really want to know the official answer, I would contact Norton.
-
Reciving error 1395 while trying to install Norton Ghost V15.0
I use a 32-bit version of Windows 7. The error is "ERROR 1395 an error occurred during the installation of assembly component. Norton thinks it's a problem with Windows Installer? Any ideas?
I use a 32-bit version of Windows 7. The error is "ERROR 1395 an error occurred during the installation of assembly component. Norton thinks it's a problem with Windows Installer? Any ideas?
And you have tried the solutions?
http://www.Symantec.com/business/support/index?page=content&ID=TECH104256(I would ignore their notes on what it will / will not work with.)
I would say they know about the issue (not new).
http://community.Norton.com/T5/other-Norton-products/event-error-1935-during-installation-of-ghost-15-on-W7-Pro-x64/TD-p/196674http://community.Norton.com/T5/other-Norton-products/unable-to-install-Norton-Ghost-15/TD-p/302340
-
Satellite L300 - 17L - impossible to use the keys FN under Win XP
I recently bought a Toshiba Satellite L300 - 17L and I can't use the combination of keys (Fn + F1, F2...).
I downloaded all my drivers Toshiba s website... but nothing... all utilities... and nothing.
I use a Win XP OSPlease, if you can help me...
Hello
As I m wrong not the Satellite L300 - 17L belongs to the PSLBCE.
You must choose this series to download driver.I can find on the European driver Toshiba page all the necessary XP drivers for this series and as much as I know to install the * Modules * common for Win XP get the FN keys feature!
If please check this and reinstall the common Modules!
Good bye
-
Impossible to install norton 360 online
Original title: cannot install norton 360 online
I recently changed from windows xp to windows 7. I have norton 360 online through my ISP, but I can not install on my computer. I'm on dial up, so I got the new drive for windows 7, but whenever I try to install it, the program will start to install, and then after that I selected to accept and install, a message appears saying: there was a problem and the program has stopped working. Why is this happening?
Hello
Step 1: Install the clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135
Note: When you perform a clean boot, you temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
Step 3: Run the hotfix in the following article:
How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651
Step 4: Clean the Temp folder,
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
Step 3: Install Norton as an administrator
Try right click on the actual Setup.exe and choosing the option 'run as administrator '.
This example may or may not work for you with your program, use the built-in Administrator account to perform the installation.
"It seems that the"Run as Administrator"command gives you administrative privileges only, and they are not enough to install Java (and OpenOffice, by association). To work around this problem, you must actually connect to the built-in administrator.
Open a command prompt with admin rights by clicking Start, type cmd in the search/run box, hit CTRL-SHIFT-ENTER. At the prompt, type:
NET user administrator / Active: Yes
Then disconnect from your regular account and folder administrator integrated, where you might be able to install the program. When you are finished, open a session to your regular account and, for security reasons, disable the built-in using administrator account:
NET user administrator / active: No.
It may be useful
-
Impossible to install NI-VISA Driver under Windows 7
Hi all
Software isn't exactly my strength, so I apologize if this question is badly phrased or trivial.
I am trying to use NI-VISA 4.6 to create a driver for a USB mouse. My ultimate goal is to read the RAW files positional USB rather than read the position of the mouse on the screen. This way, I will be able to use the mouse to measure distance without having to worry about the cursor passes at the edge of the screen. My VI will work pretty much along the lines of this one, which was kindly donated by Intaris on this thread.
I'm running in the driver installation problems, that I created with most of the time described NI-VISA here. I created the driver .inf and copied in C:\Windows\inf. Since I am on Windows 7, I copied the Vista driver rather than the driver for earlier versions of windows (another user on the tutorial I linked above says it worked). I chose my .inf file and clicked "install" from the menu drop-down of the right button of the mouse. I received a message the first error while I tried saying that the driver was not checked and proceed in any case. No .pnf file was created in the inf folder (as I believe she should have). I tried updating the driver for this particular mouse for the new driver, I created in the Device Manager. Windows has resisted, saying that it had already installed the best driver to work.
So now I know exactly what to do. I think that other people have figured out how to make it work, but I am helpless as to what I can do differently. Is - anyone out there know what could be wrong? Is there must be a .pnf file in order to get the driver to work?
Thank you
Thanks for the help everyone. I think I finally found the solution .
I did a lot of trial and error with Windows and finally I got a driver that I created in NI VISA is accepted. Since it has been hacked together, I have a problem determining the stages that I have to work. I'm not sure that this list of steps is quite necessary or complete, but in the interest of helping people with a similar problem, I'll try to explain what I did to get the mouse to be read.
The key was probably uninstall the mouse that I wanted to use for the project. I did this in Device Manager and then found the USB root hub that was running my camera. I have updated the driver through here rather than through the section 'mouse '. Information on the procedure to be followed are explained in detail in these two knowledge base articles:
http://digital.NI.com/public.nsf/allkb/28C5E7D2E9FBB4CC86257536005A3692
http://digital.NI.com/public.nsf/allkb/3C335141B64C038886257141000036F2?OpenDocument
I created the NI-VISA drivers and saved in the default folder (under my documents / National Instruments/NI-VISA) and they installed from there. I don't know if the installation step was necessary. Then I updated the drivers as explained in the second article knowledge base related to listed.
I think that the crucial stage is uninstalling the mouse in Device Manager. This could be the "firmware" mentioned in the article by following the link, but the formulation knowledge base is so ambiguous that I thought I have to uninstall the drivers.
http://digital.NI.com/public.nsf/allkb/273BB58D3B52CE6886256F3B00714D03
Thanks again for the help
-David
-
Impossible to install Norton 360 multi-device
I'm unable to install my norton 360 multi-device. I bought the drive from best buy and had them install it on my laptop. I can not install desktop onmy
[Original title: installation]
Hello
Thanks for the Microsoft Community assistance approach.
I understand that you have problems with the installation of Norton 360.
The right place for you to contact would be supported by Norton. I suggest that you check with Norton support for more information.
https://support.Norton.com/SP/en/us/home/current/info;JSESSIONID=772CC9EDF5701CA6E59BC8E4D854736D.4
I hope this helps you get the fixed number. If you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.
-
Impossible to install TosBT-SDK-v710 for Win XP with Thinkpad bluetooth
Hello
I install TosBT-SDK-v710 on windows XP.
The system has a Bluetooth device, even in this case the installation of the drivers, the dialog box appears and requests for peripheral connection Bluetooth. If we cancel the dialog box, I think that pilots can never settle. How to solve this problem, I have a 'Thinkpad bluetooth with enhanced data rate' device attached to the system.In the tools folder, we have a tool called HdpAgent.exe.
The tool documentation says "he must prepare the remote PC and run this program," what we need to do?If we execute on the system where it is installed, after [Power]-[ON] button, in the list box connect target, is listed. Let us know how to use this tool.
Thank you
Martine GanamukhiHello
I m not quite sure, but generally you should get the BT/battery compatible drivers from the manufacturer of your device driver page.
Try and if you have some problems with the installation I recommend you to ask the support of the manufacturer of the device. In your case, it seems to be LenovoGood luck
-
Cannot install Zoo Tycoon 2 under win 7
I'm having a problem where I can't even the game to install on my new win7 Pc.
I start the installation process and I get the message via the installer:
Setup cannot install files system or update shared files, if the files are in use. Before you continue smoking other applications.
But when I go into my task manager, depending on the applications tab, the installer is the only application registered running.
Any suggestions?
HM, maybe you should check Windows Installer instead.
Some may be of useful comments:
-
How to install Autosketch 2.1 under Win 7 XP Mode?
Program works OK with XP and even Vista. But Win 7 64 bit same XP mode seems to love!
I pressed Autosketch 2.1 for many years. It is very precious to me. I use it for countless tasks of engineering and he prefers on command I can afford or the sum of $ buy, nor hours to learn! I heard that being Autosketch 16-bit, it cannot do to run on Windows 7 64 - bit. Frankly, I don't understand that. It ran fine on XP on a 32-bit system! Please someone in the community help us find a way to make this AutoSketch which has been so powerful for so many years for many professionals, works on Windows 7 64-bit.
-
Impossible to install photoshop elements on laptop Win 8
I bought this a few months ago and are still unable to download on my laptop with Windows 8.1
Please call me [personal information by host]
I did it
Sent from my iPhone
-
This is the 1935 error once again, the installation of Norton Ghost Windows 7 64 bit
Hi, I say 'yet' because it's a frequently asked question, unfortunately with no viable solutions.
I installed Norton Ghost 15 on this machine 3 years ago. No problems. Today, when you pull up the ghost, she suddenly want to run the MSI installer for some reason any and then complains about something. Unfortunately I got a copy of the error. I just uninstalled completely, using the Symantec removal tool.
When you try to install Norton Ghost again, I get this:
I unchecked .net framework 3.5 in Windows features, rebooted, checked again and rebooted. I installed Microsoft C++ 2005 and 2008 Redistributable. This I did because another post suggested to do this.
I also activated the journal feature detailed in the Windows installation program and get a huge file full of data, which tell me what I can use. Yes, something went wrong shot, but in this (these) file (s) there is no special section that stands out in a way that tells me that what in fact was wrong.
Now, is say, not possible to obtain information in plain language? Saying that the Assembly is absent, this file is missing and so on. Because obviously something is not here that should be there, who were 3 years ago, when Norton Ghost installation went flawless.
Or is it something else? "An error occurred during the installation of assembly component", which component? And what is normally the cause of this problem, which will normally not when an assembly component cannot be installed?
My question basically goes like this:How can I know what is the real error? Assembly that is missing, have what is missing? The blind approach isn't trying for me, there must be a scientific way of this approach!
Any help appreciated!
-Ingvar
OK, I found the solution:
Big - just install Ghost until the error message. Do NOT click OK, instead, use task or much better, Manager procedure such as SysInternals Monitor to kill all processes of msi windows installer and everything that has nothing to do with Norton.
Ghost 15 is now installed and you can register and use it.
Problem is, there is a current cancellation, who will run the next time you want to install (all) application.
Delete these registry keys:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress
and
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress\Rollback
Now, everything should be good, at least it looks so here!
Detective Conan.
-Ingvar
-
Norton Ghost Windows 8 incompatibility
I recently installed Norton Ghost 15 on a laptop running Windows 8.
It will not work. He asks to install the .NET 2.0 framework, but this framework is no longer supported by Microsoft.What should I do?I would contact Symantec. Personally, I would remove ghost because I'm not a fan.
-
With the help of Adobe Acrobat 4 for post-processing under Win 8 compression
I have created pdf files and scanned documents.
I wonder if I can install using Acrobat 4 under Win 8 64 bits to compress my course PDF files (assuming that it's the only thing I do with Acrobat 4.0)?
I can't afford the new Adobe Acrobat X Pro at this time.
It is not compatible and that which settles.
Mylenium
Maybe you are looking for
-
Please mention the attached JPEGS. When I switch between tabs, favicon image repeated behind the text. In some cases, the image of the vertical scrollbar is messed up, it cleared up when I click on it. -Does not appear to affect performance, simply a
-
Tecra A9 - issues with Vista installed wireless
1. sometimes, I start my machine 3 to 6 times before the wireless to connect to my router.2. some time when I connect to the internet via my wireless connection hangs at "opening port". Concerning
-
Can I uninstall service Pack2 after installation of service pack 3?
My hard drive needs a break and I'm trying to find some things to uninstall to lighten the load.
-
How to root my Xperia Ray (ST8i)
I have the android 2.3.4 version and build number 4.0.2.A.0.62 My bootloader is locked. The only method i Know is to downgrade to 4.0.2.A.0.42 or go to the ICS and root then it. is there another method? If I flash my rom downgrade/upgrade to level th
-
I get the reference to invalid license. I had this happens already and correction received from MS. here is my info printing Diagnostic tool. Diagnostic report (1.9.0019.0):-----------------------------------------Given WGA-->Validation status: inva