Impossible to install the LAN Driver on Satellite A100 PSAANE

Hello
Recently, I removed my PSAAN A100 for reasons of performance of Vista and installed XP. So far so good.
All devices are doing well except the Ethernet LAN. Here I am not able to install the driver, although I downloaded the driver OK with the correct inf file of the Page of the Toshiba Service, unpacked in the new folder. Then I chose this folder when trying to install this driver, but I've always had the statement: cannot install blah blah blah.
Then I found with Everest that there could be an Intel PRO/100 VE network onboard connection. So I installed this driver, but XP told me, that the machine could not be started.
What now? There may be someone who knows a solution?

Salvo Hans Peter Jansen

Hello

You have an Intel LAN card, but you may have enough to install a bad driver.
Toshiba page offers two LAN drivers;

Driver Intel Ethernet LAN 1000 Pro 9.2.24
Driver Intel LAN Ethernet 100 Pro 8.0.43.0

Please check once again which LAN chip has been included and choose the correct driver.

Tags: Toshiba

Similar Questions

  • Satellite A100-455: Impossible to install the LAN driver

    Hello

    I have recently re installed my dual boot Linux/Windows. Linux works fine, but under windows, it refuses to install the LAN Driver (Ethernet controller).

    I installed before the chipset and it still does not work. All the drivers have been downloaded from the Web from Toshiba website.

    Any idea on what could be the problem?

    Thank you

    Hello

    I know that this question;
    I think you just tried to install a LAN driver is not compatible.

    The A100-455 seems to belong to the PSAA9E series.
    If you choose this series then you will find two different Lan drivers;
    Intel v9.2.24 is a driver Pro1000 and Intel v8.0.43.0 is a driver of Pro100.

    Check both!

  • Installing the audio driver in Satellite A100-773

    I just installed Windows XP SP2 on my Satellite. I did a backup driver CD with my recovery CD. Now, here's my problem:

    I followed the Installation Instructions and each device works fine, except my audio driver, I also have an unknown PCI device. I expect that the PCI device is the problem for my work not driver Sound. Maybe someone knows an answer to this problem.

    I guess that the audio driver has not been installed correctly and so the sound doesn't work on the laptop. I think the unknown PCI device is the sound card.

    I put t know how you installed the audio driver, but I recommend you download the latest version of the Toshiba page, then install the audio driver in Device Manager.

  • Satellite M40X - impossible to install the LAN driver

    Heya,

    I wonna set up a local network with my laptop and my home pc. There is just this one problem, that my M40X doesn't. I connectet my homepc and the toshiba with a cross-over cable. He worked at my home pc. The two winXP. The toshiba it shows me "cannot find cable network."
    I installed the driver, you can get here on the page, nothing. all firewalls are declining.
    I know that there a patch for win2000 but not for winXP.

    can someone, please.

    Hello

    Are you sure that the cable is plugged solid?
    Have you tried the plug with the different cable?
    In my opinion, you can try to run the Pc Toshiba ConfigFree and the diagnostic tool and check the result.
    Unfortunately, I put t have information on some patches

    Good bye

  • Impossible to install the graphics driver for Satellite L50-B-1EE

    Hello

    I can't install the intel graphics hd on my laptop?

    Have you tried to install the Intel HD graphics driver in Device Manager?
    It works for you.

    You must download a zip package.
    Then, unzip the folder and choose the installation advanced driver in Device Manager.
    This allows you to choose the folder (unzipped) driver and the system would take the driver automatically.

  • Impossible to install the audio driver Windows XP Home for my Satellite A110

    Hello!

    I formatted my hard drive and now I have reinstalled Windows XP on my TOSHIBA SATELLITE A110-160.
    I don't have the recovery CD, but I have downloaded all the drivers from toshiba.com.
    The thing is, when I try to install the audio driver Realtek HD, I get a message that I have loaded on my system bus driver so
    to install the Realtek HD audio driver!

    So I don't know what to do, and I can't play the audio in my laptop!

    Please, help me!

    Before you start to install a driver available, please download and review the Instructions for installations.
    You'll find order exact facilities. Please follow this wnd control facilities that everything will be OK.
    Have you installed the chipset utility first?

  • Impossible to install the audio driver for Vista for Satellite M100-152

    Hi people,

    I have a problem with installing the audio driver for my M100 - 152 (PSMA1E). I downloaded the driver and tried to install it. At one point during the installation progress, sometimes an error message that says: "Setup does not match infFile Realtek HD Audio.
    Sound works when headphones are connected but no sound to the speakers.

    Someone at - it an idea?

    Best regards
    Hannes

    Post edited by: hannesgpunkt

    Post edited by: hannesgpunkt

    Hello

    where did you downloaded the driver? On the toshiba Web site? Maybe you should try the driver from realtek home page because they are native and absolutely clear things from other manufacturers. I think you should try "www.realtek.com" and install the driver downloaded from there, once you have uninstalled the driver for your machine.

    Welcome them

  • Question about installing WXP LAN Driver on Satellite Pro A120

    I have a Satellite Pro A120 (PSACIE) with Vista installed. I created a dual boot with XP Prof I seem to have all the drivers except the WLAN and LAN drivers. I have downloaded the LAN driver there is no setup.exe file. No problem, (I think, maybe someone out there knows differently?).

    I used Device Manager to load the file inf and intel pro/1000 PL network connection selected with the Hardware Installation Wizard. At the end the wizard said there was an error code 10 and that the device probably would not work properly.

    Can anyone help? It does not of course! By pure chance that I bought a port replicator, its LAN works with XP but do not work with Vista! (There is a hint here)

    Is it possible I can get details on the LAN device such as model, serial number? Any help appreciated gratefully.

    Hello

    Are you sure you used a right and support for driver LAN?
    Error code 10 is known to me and mostly it appears if the device cannot be started because the driver is not compatible

    Ok. To my knowledge, there are two different Satellite Pro A120:
    the unit of PSAC0E supports Lan Chip Realtek 8100 CL

    and the PSAC1E supports the chip Intel 82573 L (Vidalia)

    So, what phone do you use?

  • Impossible to install the latest driver for Intel 82852/82855 GM/GME (SP A40)

    I know that this topic is explained before by NickyNoogle and Juan28, however I need more help.
    I can't install the latest driver for the graphics controller Intel 82852/82855 GM/GME (Toshiba A40 Satellite Pro). I downloaded the driver from the Intel Web site, but it has not installed and there is an error message "unable to install on this computer, please contact with the producer. I need to update the driver of 6.13.10.3514 version of lates version (6.14.10.4421). I know that I have to use the Toshiba drivers only. Could you be so kind and stick it to the post any link of this driver to download? I can't seem to find it on the Toshiba site anywhere.

    Hello

    You can not install it because of the material. AFAIK designed Toshiba drivers are slightly modified to be limited and protect the graphics card. Driver Intel can get the map on the maximum limit and destroy it. This is the reason why you can not install it.

    Sorry but there is nothing to do. Try to check if a new Toshiba unit has the same graphics card and latest driver on Toshiba download page. Date of arrival:
    Sat Pro L10
    Satellite L10
    Satellite A50 and A80 (6.14.10.3943)

    Good bye

  • Impossible to install the latest driver Intel Display

    I am trying to install the latest driver from Intel HD graphics card, but I always get the message that my system does not meet the minimum requirements...

    http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS032433#systems

    I have a T430s.

    Here's a screenshot of my dxdiag:


  • Impossible to install the graphics driver

    Hi I have Windows 8 pro instaled in HP Pavilion 15-n240tx and when I try to install the NVIDIA graphics driver, it says I must first install Intel (r). When I try to install HD graphics drivers on the site it says no minimum requirement to install the driver. How can I fix tis

    Hello:

    See if it works...

    First install the Intel Chipset Driver and restart.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng

    Then, install the Intel HD graphics driver and restart.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23714

    Then, install the graphics driver nVidia and restart.

    http://www.nvidia.com/download/driverResults.aspx/77228/en-us

  • Impossible to install the bluetooth driver in XP Mode, error "this software cannot be installed remotely. Please connect to the local computer, and then try again.

    I have win 7 pro as my OS, whenever I try to install the bluetooth driver in xp mode, I get an error message saying "this software cannot be installed remotely. Please connect to the local computer, and then try again.

    Check this box:

    http://support.Microsoft.com/kb/2438651/en-us

  • Impossible to install the graphics driver for Probook s 4530 without blue screen or the repair mode

    Recently due to the failure of the hard drive, I replace my drive with an SSD Intel 520 180 GB. I tried to install from a DVD MSDN windows 7 Enterprise 64-bit. Everything was going fine until I had to install the drivers. All of them have been installed OK, but not for the graphics. A useful user Paul_Tikkanen guided my via different drivers and tricks, but with the same sad result. Not his fault, of course. On recommendationen of Paul, I ordered support restore disks for HP businesses. I got them today and of course happy as a kid receives his candy Saturday I put disks in the dvd player for the installation. Same thing happened again. Graphics driver has not worked here either. He me gives either a blue screen on reboot or I am se repair to restart mode.

    I tried to find auto driver from Intel, but IE crashes when you try. I also tried the generic Intel driver. If someone has an idea or can extract drivers work this would be much appreciated.  The generic Microsoft driver works well but I get a maximum of 1024 * 768 resolution.

    I also read that you need to install the chipset driver and intel

    You can see my entries a little frustrated in the following thread: http://h30434.www3.hp.com/t5/Notebook-Display-and-Video-e-g-Windows-8/4530S-graphics-driver-and-fing...

    The thread above also contain useful material IDS etc.

    I have also contacted the provider here in Sweden, to check if the warranty has expired yet. The laptop is 1.5 years old.

    This problem has been resolved by manually installing the HP Intel HD graphics driver.

  • Upgrade or clean before installing Workstation 12 - impossible to install the hcmon driver.

    Hello

    I have problems to upgrade to version 12.0.1 12.1.1.

    When I tried to upgrade the version of 12.1.1, it stopped about 75% and popped up an error message that says "cannot install the hcmon driver.". Then he rolled back the

    copy my 12 Pro Workstation installation process and completely deleted. Tried to clean the facility, but the same error message appears.

    Here are my specs:

    Intel Core i3-6100 @3.7 GHz

    6 GB Dual-Channel DDR3 (1 x 4 GB 1600 MHz; 1 x 2 GB 1333 MHz)

    Motherboard ASUS H110M - has D3

    Card ASUS STRIX GTX 750 Ti 2 GB graphics card

    2 x 320 GB WD Blue hard drives

    Windows Pro 64-bit 10

    Hello

    Welcome to community work station!

    End of roll back, could you please restart your host and then retry installing Pro Workstation?

    Kind regards

    Shawn

  • Satellite P300-1 c 7 - impossible to install the audio driver

    Hello!
    I need help!

    I want to find the driver for the sound (Satellite P300-1 to 7, Windows XP). When I download the driver called "sound driver" of your site, my laptop gives me the trace message that the device for the driver cannot be found.

    Could you please tell me why this error occurs?
    Thank you.

    You have installed all the service packs for Windows XP?

    Satellite P300-1 c 7 belongs to the series PSPC4E then you have chosen the right model?
    Check again!
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Have you installed the chipset front driver?

Maybe you are looking for

  • Numbers 4.0 - Bug with default date when entering the time alone?

    I've just updated to 4.0 numbers after upgrade to Mac OS Sierra and met with what seems to be a bug. Previously when I enter a time in the format hh: mm in a cell that has the format of Date and time, it would create the date date of the day, because

  • Installing the program on HDD internal 2 on the Satellite A200 - 28 p

    Hello world Can someone help me? My pc has 3 discs apparently (this is a Satellite A200 - 28 p) and when I do a disk defragment it says that there are 3 a windows and c and d. Now, my query is can I install programs on the d drive I have recovery dis

  • Problem USB 2.0 on Satellite P200-1JR

    I bought my laptop about a month ago, and yesterday I tried to use my flash drive.After noticing that he took too long to transfer data, I checked the usb ports in Device Manager.It shows that I have five simple USB and two USB 2.0 host controllers.C

  • TestStand freezes when calling user interface

    Hello I did a bit of seraching but the problem I have is intermittent for one of the positions that I have found useful. I have a built in CVI user interface that is called the part edit-a type of step in time. When I call the UI for several times no

  • unhandled exception

    "When I turn on my computer (Windows xp) a dialog"Debugging tools"unhandled exception". How can I stop this from happening?