Impossible to install Vista 64-bit SP2 as it says file doesn't have a digital signature?

Similar Questions

• Impossible to install Vista 32 bit or Windows 7 on my Satellite L300D

  Hello world

  I recently decided to reboot my laptop, because whenever I open it, it will say do to run a recovery system and doesn't go anywhere.
  I left it on for hours and nothing came, so I tried to install Vista 32 bit, but does not. I need Windows Vista 64 bit or is this something else?

  In general your ad is a little complicated to understand. We understand that you have problems with the installation of the OS, but I put t understand exactly what happens then please be so kind and try to explain what happening exactly when you try to use the original Toshiba recovery image.

  Does installation starts correctly?
  On what stage is stays and doesn't go further?
  What happen when you try to use the Win7 installation disc?

  Please provide as much information as possible.

• Impossible to install Vista 64-bit on Qosmio F20 - HDD not visible

  during the installation of windows Vista-64, it does not recognize the hard drive. My Qosmio Toshiba raid scsi LD0 drive a.

  Hello

  Vista 64 bit does not recognize the HARD drive because the RAID driver has not been installed in a previous step.
  You need to install the RAID driver first, and then Vista will see HARD drive!

  But I think there could be a problem with the installation of the 64-bit version.
  The driver of Toshiba page doesn t provide any drivers for the 64 bit OS and you will find all drivers 64-bit RIAD.
  You can try to install the 32-bit version but I m not sure if it will run.

  You can test it!

• Cannot install Vista 32 bit SP2. (Original version)

  I was trting to install the SP2 update as it came out. I did a clean boot and shut down all start up programs, downloaded the stand alone SP2, tried to download from the update site, use the System File Checker tool, downloaded and installed update readiness tool and turned off all firewall and anti virus, etc... I'm at the end of the roll. What should I do to get this thing installed? I have never had this kind of problem before and don't know what I could do wrong. Message saying updates cannot be instralled and the computer is back changes made to the computer. There is an event id 4375 in the event viewer. I don't remember any other error code that appeared. Help, please!

  Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack:
  http://support.Microsoft.com/kb/967818

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  ==========================

  Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to install vista 64-bit sp2, his show Installation has failed.

  his show Installation has failed.

  Hi manjunathak,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts and try to install the updates.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the Microsoft article mentioned below and check if it solves the problem:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17669

  For reference:

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Error code 80070490 Vista 32 bit /SP2/

  For month auto update tried to install Vista 32 bit SP2.  I read all the options in the solutions of Ms.  That is to say. stand-a-lone, by ensuring that the intell. the service is auto/default.  Nothing helps.  I have a printer HP PSC 1350 all in one I would use but cannot without this update.  Can anyone help? Please?

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712.

  My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712.  I tried to follow the directions on the site by running the system preparation tool update... did not work.  Then I tried to go back to a restore point and try the update again.  Yet once, didn't. I went back several restore points, but it has always failed.  I don't have an installation DVD, because it came with Vista preloaded.

  Help?

  PaulS22401,
  Walk through the steps described in this article: http://support.microsoft.com/kb/957310

  Let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista 32-bit SP2 install 0x800b100 error message

  Vista 32-bit sp2 will not install on my laptop. I keep recieveing TRUST_E_nosignature (0x800b100) error message. my laptop is an Acer Aspire 5720-4126 (5720z). also this could have something to do with windows defender not updated and does not as well? Please answer as soon as possible.

  Microsoft today released the Checksur tool and one of the main advantage of the CheckSUR tool is that it contains updated files to help installation problems target Vista SP2. MS expects the tool to help troubleshoot Vista SP2 install error 0 x 80070490 0x800B0100.

  You can get the last pieces of CheckSUR upward on the Down Load Center (DLC). For more information and links, see KB947821 .

  I had similar problem and this new checksur tool works very well

• Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates

  Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates.  He worked for years until now.

  How to fix?

  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

• KB981793 update Vista 64 - bit SP2 error 8024200d

  Windows Vista 64 - bit SP2. Update cannot be installed with 8024200d error code. ALEKS

  Error 0x8024200D code is:
  SUS_E_UH_NEEDANOTHERDOWNLOAD
  The Setup program requires more data to download

  Try manually downloading and installation: http://www.microsoft.com/downloads/details.aspx?FamilyId=41988289-8fa9-4d3d-a959-d3e64ccc6071&displaylang=en

  or

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  then try wu

  TaurArian [MVP] 2005-2011 - Update Services

• 800b0100 error... KB2690533 impossible to update, vista 32-bit

  Ive done... fine analysis tool

  I've done the direct link for the download... not good... told me "the update does not apply to your system"

  I've done the fixit of m... not well... tells me ' locations by default windows update of data have changed «...»» "repair locations by default windows update... DOES NOT WORK.

  ive never had a problem before, so I don't know what to do.

  I have windows vista 32 - bit SP2

  Holy... cow I finally found how to make the installation of the update... it took me two days!

  Reach:

  http://support.Microsoft.com/kb/894199

  find it and click on the link at the bottom.

  MS12-033: a security update for Windows Embedded Standard 7, Windows 7, Windows Server 2008 R2, Windows Server 2008 and Windows Vista (KB2690533)

  Locale: all the
  Deployment: update important/automatic, WSUS, and catalog
  Classification: security updates
  Security severity rating: Important
  Target platforms: Windows Embedded Standard 7, Windows 7, Windows Server 2008 R2, Windows Server 2008 and Windows Vista
  Approximate file size:

  • Windows Embedded Standard 7/Windows Update 7: ~ 68KB
  • Windows Embedded Standard 7, x 64 x 64/Windows 7/Windows Server 2008 R2 x 64 update: ~ 77 KB
  • Windows Server 2008 R2 IA-64 update: ~ 103KB
  • Update for Windows Server 2008 and Windows Vista: ~ 64 KB
  • Windows Server 2008 IA-64 update: ~ 97KO
  • X 64/Windows of Windows Server 2008 and Vista x 64 update: ~ 70 KB

  Description:
  A security issue has been identified that could allow an authenticated local attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  http://go.Microsoft.com/fwlink/?LinkId=247902

• Flash Player 11.9.900.117 not recognized by Opera and Firefox on Windows Vista (32-bit) SP2

  I use 4 browsers on my laptop Toshiba Windows Vista (32-bit) SP2:

  Internet Explorer 9

  Google Chrome Version 30.0.1599.101 m

  Opera Version 17.0.1241.45

  Mozilla Firefox Version 24.0

  I just downloaded and installed Flash Player 11.9.900.117, which is recognized by IE9 and Chrome from Google, but not in Opera and Firefox, even after closing the browser and re-start.

  How can I get Flash Player to work with Opera and Firefox?

  Thanks for your help.

  See you soon,.

  Joel
  

  There are two different versions of Flash Player for Windows (3 If you count Chrome)

  ActiveX which is ONLY for IE,

  Flash Player for other browsers which is for Opera, Safari and Firefox, and

  "PepperFlash" that is built into Chrome by Google.

  Download the tool or another browser version will have NO EFFECT on Chrome.

  Download of the ActiveX version WILL NOT install a plugin for Opera or Firefox because they do not use controls ActiveX - NO browser but IE uses not since about 2001.

  Download Adobe Flash Player for Firefox and Opera setup directly by clicking on the following link.

  Flash Player plug-in (all other browsers)

• New HARD drive installed Vista 32 bit, but need drivers for Satellite Pro A300-1MC

  "Because my recovery disks that I made 3 years ago does not, I just installed Vista 32 bit and then on the Toshiba site, where I have downloaded all the drivers available for my laptop (a Satellite Pro A300-1MC) on a USB key (that I don't have a driver to connect to broadband on my laptop) and when I tried to open on my laptop a message comes up saying" Please insert the last disk of all selfextracting and click OK to continue. "

  So what I do now?
  Thank you

  Sounds like you have enabled autoplay
  Whenever you insert the memory key USB flash it will try and read the contents of the files on it.
  You can disable this by holding SHIFT when you insert the USB key.
  This should disable the AutoPlay option.
  Then you can go to MY computer in order to access the USB key.

  Note: pilots are zipped so you will need to decompress the content first, I installed a 3rd third party tool called WinRAR to unpack the packages unique.

• Can I install Vista 64 bit on 32-bit Vista?

  I can install Vista 64 bit on a Vista 32-bit mode window mode or should I make an OS install clean / modified?

  You must do a clean install, which means that you must start again Vista 64-bit DVD and follow the instructions on the screen.

  I think the upgrade from 32 bit to 64 bit is not possible.

  Check this Microsoft page:
  + Can I move from a 32-bit version of Windows to a 64-bit version of Windows? +
  http://windowshelp.Microsoft.com/Windows/en-us/help/41531554-d5ef-4f2c-8fb9-149bdc5c8a701033.mspx#EFF

  Good bye

• Is it possible to install Vista 64-bit on Satellite Pro P300-1CS?

  Is it possible to install vista 64-bit on the Satellite Pro P300-1CS?
  Best regards
  DUP

  Hello!

  It should be possible to install Vista 64-bit on the laptop but I could be that you will get not all drivers.
  For now, doesn t support and 64-bit drivers Toshiba offers but you can search on other sites:

  Here are some examples:
  -Intel chipset: [www.intel.com]
  -Realtek sound chip: [www.realtek.com]
  -WLAN driver: http://195.182.196.33/wlan/
  -Bluetooth: http://195.182.196.33/bluetooth/

  Good luck!

  Good bye